ABSTRACT
Metallic glasses represent a class of metallic alloys with a fully amorphous structure and attractive properties, making them promising in bioimplant applications. Here, the degradation tolerance of biocompatible cobalt-phosphorus (Co-P) metallic glasses was studied in a simulated physiological environment. The metallic glasses were synthesized in the form of coatings through a facile electrodeposition approach. This method utilizes their outstanding surface characteristics and bypasses the size limitations usually associated with their bulk counterparts. The Co-P alloys showed exceptional tribological response with â¼14% lower coefficient of friction and 2 orders of magnitude lesser wear rate compared to SS316 stainless steel. In addition, the Co-P alloys showed a 3 times higher hardness and 4 times higher hardness/modulus ratio compared to SS316, indicating better elastic recovery under dynamic shear stresses that are common in load-bearing bioimplants. The Co-P metallic glasses exhibited excellent hemocompatibility and cytocompatibility in terms of lower platelet adhesion, spreading, and aggregation, a hemolysis ratio lower than 1%, and enhanced surface wettability, suggesting a superlative performance in bioimplant applications.
Subject(s)
Biocompatible Materials , Cobalt , Biocompatible Materials/chemistry , Corrosion , Alloys/chemistry , WettabilityABSTRACT
Cobalt-chromium-molybdenum (CoCrMo) alloys are widely used in orthopedic implants due to their excellent corrosion and wear resistance and superior mechanical properties. However, their limited capability to promote cell adhesion and new bone tissue formation, poor blood compatibility, and risk of microbial infection can lead to implant failure or reduced implant lifespan. Surface structure modification has been used to improve the cytocompatibility and blood compatibility of implant materials and reduce the risk of infection. In this study, we prepared CoCrMo alloys with surface nanostructures of various aspect ratios (AR) using laser-directed energy deposition (L-DED) and biocorrosion. Our results showed that medium and high AR nanostructures reduced platelet adhesion, while all of the alloys demonstrated good blood compatibility and antibacterial properties. Moreover, the medium and high AR nanostructures promoted cell adhesion and spreading of both preosteoblast MC3T3 cells and human bone marrow mesenchymal stem cells (hMSCs). Furthermore, the nanostructure promoted the osteogenic differentiation of both cell types compared with the flat control surface, with a substantial enhancing effect for the medium and high ARs. Our study proposes a promising approach for developing implant materials with improved clinical outcomes.
ABSTRACT
Cell-derived extracellular matrix (ECM) has become increasingly popular in tissue engineering applications due to its ability to provide tailored signals for desirable cellular responses. Anisotropic cardiac-specific ECM scaffold decellularized from human induced pluripotent stem cell (hiPSC)-derived cardiac fibroblasts (hiPSC-CFs) mimics the native cardiac microenvironment and provides essential biochemical and signaling cues to hiPSC-derived cardiomyocytes (hiPSC-CMs). The objective of this study was to assess the efficacy of two detergent-based decellularization methods: (1) a combination of ethylenediaminetetraacetic acid and sodium dodecyl sulfate (EDTA + SDS) and (2) a combination of sodium deoxycholate and deoxyribonuclease (SD + DNase), in preserving the composition and bioactive substances within the aligned ECM scaffold while maximumly removing cellular components. The decellularization effects were evaluated by characterizing the ECM morphology, quantifying key structural biomacromolecules, and measuring preserved growth factors. Results showed that both treatments met the standard of cell removal (less than 50 ng/mg ECM dry weight) and substantially preserved major ECM biomacromolecules and growth factors. The EDTA + SDS treatment was more time-efficient and has been determined to be a more efficient method for generating an anisotropic ECM scaffold from aligned hiPSC-CFs. Moreover, this cardiac-specific ECM has demonstrated effectiveness in supporting the alignment of hiPSC-CMs and their expression of mature structural and functional proteins in in vitro cultures, which is crucial for cardiac tissue engineering.
ABSTRACT
The vascular endothelium serves as a physical barrier between the circulating blood and surrounding tissue and acts as a critical regulator of various physiological processes. In vitro models involving vasculature rely on the maintenance of the endothelial barrier function. In this study, we fabricated 2D aligned nanofibrous membranes with distinct pore sizes via electrospinning and investigated the effect of membrane pore size on endothelial barrier function. Our results demonstrated that the use of the nanofibrous membranes promoted the formation of a tight vascular endothelium and sustained barrier function for over one month in comparison with conventional transwell setups. Moreover, the examination of the nucleocytoplasmic localization of yes-associated protein (YAP) in the endothelial cells indicated that nanofibrous membrane promoted YAP expression and its nuclear localization, critical to endothelial barrier function. Furthermore, the comparison of permeability between random and aligned nanofibrous membranes underscored the importance of pore size in preserving barrier function. Our findings offer a valuable strategy for creating more physiologically relevant in vitro vascular models and contribute to the understanding of endothelial barrier formation and maintenance mechanisms.
Subject(s)
Endothelial Cells , Nanofibers , Membrane ProteinsABSTRACT
Skeletal muscle regeneration relies on the tightly temporally regulated lineage progression of muscle stem/progenitor cells (MPCs) from activation to proliferation and, finally, differentiation. However, with aging, MPC lineage progression is disrupted and delayed, ultimately causing impaired muscle regeneration. Extracellular vesicles (EVs) have attracted broad attention as next-generation therapeutics for promoting tissue regeneration. As a next step toward clinical translation, strategies to manipulate EV effects on downstream cellular targets are needed. Here, we developed an engineering strategy to tune the therapeutic potential of EVs using nanotopographical cues. We found that EVs released by young MPCs cultured on flat substrates (fEVs) promoted the proliferation of aged MPCs while EVs released by MPCs cultured on nanogratings (nEVs) promoted myogenic differentiation. We then employed a bioengineered 3D muscle aging model to optimize the administration protocol and test the therapeutic potential of fEVs and nEVs in a high-throughput manner. We found that the sequential administration first of fEVs during the phase of MPC proliferative expansion (i.e., 1 day after injury) followed by nEV administration at the stage of MPC differentiation (i.e., 3 days after injury) enhanced aged muscle regeneration to a significantly greater extent than fEVs and nEVs delivered either in isolation or mixed. The beneficial effects of the sequential EV treatment strategy were further validated in vivo, as evidenced by increased myofiber size and improved functional recovery. Collectively, our study demonstrates the ability of topographical cues to tune EV therapeutic potential and highlights the importance of optimizing the EV administration strategy to accelerate aged skeletal muscle regeneration.
Subject(s)
Cues , Extracellular Vesicles , Cells, Cultured , Muscle, Skeletal , Cell DifferentiationABSTRACT
Determining the mechanistic causes of lung diseases, developing new treatments thereof, and assessing toxicity whether from chemical exposures or engineered nanomaterials would benefit significantly from a preclinical human lung alveolar interstitium model of physiological relevance. The existing preclinical models have limitations because they fail to replicate the key anatomical and physiological characteristics of human alveoli. Thus, a human lung alveolar interstitium chip was developed to imitate key alveolar microenvironmental factors including an electrospun nanofibrous membrane as the analogue of the basement membrane for co-culture of epithelial cells with fibroblasts embedded in 3D collagenous gels, physiologically relevant interstitial matrix stiffness, interstitial fluid flow, and 3D breathing-like mechanical stretch. The biomimetic chip substantially improved the epithelial barrier function compared to transwell models. Moreover, the chip having a gel made of a collagen I-fibrin blend as the interstitial matrix sustained the interstitium integrity and further enhanced the epithelial barrier, resulting in a longevity that extended beyond eight weeks. The assessment of multiwalled carbon nanotube toxicity on the chip was in line with the animal study.
Subject(s)
Biomimetics , Lung Diseases , Animals , Humans , Longevity , Lung , Pulmonary AlveoliABSTRACT
The present work investigated biocompatibility of the unique nanostructural surface morphology inherently evolved in laser-based additively manufactured CoCrMo after biocorrosion in simulated body fluid at physiological temperature (37 °C). The extremely rapid thermokinetics intrinsically associated with the laser-based additive manufacturing technique resulted in heterogeneous cellular dendritic solidification morphologies with selective elemental segregation along the cell boundaries within CoCrMo samples. Consequently, a selective and spatially varying electrochemical response resulted in generation of a nanoscale surface morphology (crests and troughs) due to differential localized electrochemical etching. Also, depth of the trough regions was a function of the applied potential difference during potentiodynamic polarization which resulted in samples with varying morphological ratio (depth of trough/width of cell wall). CoCrMo with such nanoscale surface undulations were proposed for enhanced biocompatibility in terms of viability, spreading, and integration of MT3C3 pre-osteoblasts cells elucidated via MTT assay, immunofluorescence, and microscopy techniques. Furthermore, the influence of the morphological ratio, characteristic to the additively deposited CoCrMo after electrochemical etching (biocorrosion) on biocompatibility of MT3C3 pre-osteoblasts cells was qualitatively and quantitatively compared to a mirror-polished flat CoCrMo surface.
Subject(s)
Alloys , Lasers , TemperatureABSTRACT
The mechanical properties and forces in the extracellular environment surrounding alveolar epithelial cells have the potential to modulate their behavior. Particularly, breathing applies 3-dimensional cyclic stretches to the cells, while the stiffness of the interstitium changes in disease states, such as fibrosis and cancer. A platform was developed that effectively imitates the active forces in the alveolus, while allowing one to control the interstitium matrix stiffnesses to mimic fibrotic lung tumor microenvironments. Alveolar epithelial cancer cells were cultured on these platforms and changes in the glycocalyx expression were evaluated. A complex combination of stiffness and dynamic forces altered heparan sulfate and chondroitin sulfate proteoglycan expressions. Consequently, we designed liposomal nanoparticles (LNPs) modified with peptides that can target heparan sulphate and chondroitin sulfates of cell surface glycocalyx. Cellular uptake of these modified nanoparticles increased in stiffer conditions depending on the stretch state. Namely, chondroitin sulfate A targeting improved uptake efficiency in cells experiencing dynamic stretches, while cells seeded on static stiff interstitium preferentially took up heparan sulfate targeting LNPs. These results demonstrate the critical role that mechanical stiffness and stretching play in the alveolus and the importance of including these properties in nanotherapeutic design for cancer treatment.
ABSTRACT
Regulating cell behavior using nanotopography has been widely implemented. To facilitate cell adhesion, physical nanotopography is usually coated with adhesive proteins such as fibronectin (FN). However, the confounding effects of physical and biochemical cues of nanotopography hinder the understanding of nanotopography in regulating cell behavior, which ultimately limits the biomedical applications of nanotopography. To delineate the roles of the physical and biochemical cues in cell regulation, we fabricate substrates that have either the same physical nanotopography but different biochemical (FN) nanopatterns or identical FN nanopatterns but different physical nanotopographies. We then examine the influences of physical and biochemical cues of nanotopography on spreading, nuclear deformation, mechanotransduction, and function of human mesenchymal stem cells (hMSCs). Our results reveal that physical topographies, especially nanogratings, dominantly control cell spreading, YAP localization, proliferation, and differentiation of hMSCs. However, biochemical FN nanopatterns affect hMSC elongation, YAP intracellular localization, and lamin a/c (LAMAC) expression. Furthermore, we find that physical nanogratings induce nanoscale curvature of nuclei at the basal side, which attenuates the osteogenic differentiation of hMSCs. Collectively, our study highlights the dominant effect of physical nanotopography in regulating stem cell functions, while suggesting that fine-tuning of cell behavior can be achieved through altering the presentation of biochemical cues on substrate surfaces.
Subject(s)
Mesenchymal Stem Cells , Osteogenesis , Humans , Mechanotransduction, Cellular , Cell Differentiation , Cell AdhesionABSTRACT
A variety of cells are subject to mechanical stretch in vivo, which plays a critical role in the function and homeostasis of cells, tissues, and organs. Deviations from the physiologically relevant mechanical stretch are often associated with organ dysfunction and various diseases. Although mechanical stretch is provided in some in vitro cell culture models, the effects of stretch dimensionality on cells are often overlooked and it remains unclear whether and how stretch dimensionality affects cell behavior. Here we develop cell culture platforms that provide 1-D uniaxial, 2-D circumferential, or 3-D radial mechanical stretches, which recapitulate the three major types of mechanical stretches that cells experience in vivo. We investigate the behavior of human microvascular endothelial cells and human alveolar epithelial cells cultured on these platforms, showing that the mechanical stretch influences cell morphology and cell-cell and cell-substrate interactions in a stretch dimensionality-dependent manner. Furthermore, the endothelial and epithelial cells are sensitive to the physiologically relevant 2-D and 3-D stretches, respectively, which could promote the formation of endothelium and epithelium. This study underscores the importance of recreating the physiologically relevant mechanical stretch in the development of in vitro tissue/organ models.
Subject(s)
Endothelial Cells , Epithelial Cells , Cell Count , Cells, Cultured , Endothelial Cells/physiology , Endothelium , Humans , Mechanotransduction, Cellular/physiology , Stress, MechanicalABSTRACT
BACKGROUND: Right ventricular apex (RVA) is still the most common implanted site in the world. There are a large number of RVA pacing population who have been carrying dual-chamber permanent pacemaker (PPM) over decades. Comparison of left ventricular dyssynchrony, morphology and systolic function between RVA pacing population and healthy population is unknown. METHOD: This case-control study enrolled 61 patients suffered from complete atrioventricular block (III°AVB) for replacement of dual-chamber PPM. Then, 61 healthy controls matched with PPM patients in gender, age, follow-up duration and complications were included. The lead impedance, pacing threshold and sensing were compared between at implantation and long-term follow-up. Left ventricular (LV) dyssynchrony, morphology and systolic function were compared between RVA pacing population (RVA group) and healthy population (healthy group) at implantation (baseline) and follow-up. And clarify the predictors of LV systolic function in RVA group at follow-up. RESULTS: After 112.44 ± 34.94 months of follow-up, comparing with parameters at implantation, atrial lead impedance decreased significantly (690 ± 2397 Ω vs 613 ± 2257 Ωï¼ p = 0.048); atrial pacing threshold has a increased trend and P-wave amplitude has a decreased trend, but there was no statistical differences; while, RVA ventricular lead threshold increased significantly (0.50 ± 0.23 V vs 0.91 ± 0.47 Vï¼ p < 0.001), impedance (902 ± 397 Ω vs 680 ± 257 Ωï¼p < 0.001) and R-wave amplitude (11.71 ± 9.40mv vs 7.00 ± 6.91 mvï¼ p < 0.001) decreased significantly. Compared with healthy group, long-term RVA pacing significantly increased ventricular dyssynchrony (mean QRS duration, 156.21 ± 29.80 ms vs 97.08 ± 15.70 msï¼ p < 0.001), left atrium diameter (LAD, 40.61 ± 6.15 mm vs 37.49 ± 4.80 mmï¼p = 0.002), left ventricular end-diastolic diameter (LVEDD, 49.15 ± 5.93 mm vs 46.41 ± 3.80 mmï¼p = 0.003), left ventricular hypertrophy (LVMI, 121.86 ± 41.52 g/m2 vs 98.41 ± 25.29 g/m2ï¼p < 0.001), significantly deteriorated degree of tricuspid regurgitation (p < 0.001), and significantly decreased left ventricular ejection fraction (LVEF, 61.38 ± 8.10% vs 64.64 ± 5.85%, p = 0.012), but after long-term RVA pacing, the mean LVEF was still more than 50%. Long-term RVA group LVEF was negatively correlated with preimplantation LVMI (B = -0.055ï¼t = -2.244ï¼p = 0.029), LVMI at follow-up (B = -0.081ï¼t = -3.864ï¼p = 0.000) and tricuspid regurgitation at follow-up (B = -3.797ï¼t = -3.599ï¼p = 0.001). CONCLUSION: In conclusion, although long-term RVA pacing has significantly effects on left ventricular dyssynchrony, morphology and systolic function in III°AVB patients, the mean LVEF is still >50%. High preimplantation LVMI can predict the decline of LVEF.
Subject(s)
Cardiac Pacing, Artificial , Ventricular Dysfunction, Left , Case-Control Studies , Humans , Stroke Volume , Ventricular Dysfunction, Left/diagnostic imaging , Ventricular Dysfunction, Left/therapy , Ventricular Function, LeftABSTRACT
Microphysiological systems, including organoids, 3-D printed tissue constructs and organ-on-a-chips (organ chips), are physiologically relevant in vitro models and have experienced explosive growth in the past decades. Different from conventional, tissue culture plastic-based in vitro models or animal models, microphysiological systems recapitulate key microenvironmental characteristics of human organs and mimic their primary functions. The advent of microphysiological systems is attributed to evolving biomaterials, micro-/nanotechnologies and stem cell biology, which enable the precise control over the matrix properties and the interactions between cells, tissues and organs in physiological conditions. As such, microphysiological systems have been developed to model a broad spectrum of organs from microvasculature, eye, to lung and many others to understand human organ development and disease pathology and facilitate drug discovery. Multiorgans-on-a-chip systems have also been developed by integrating multiple associated organ chips in a single platform, which allows to study and employ the organ function in a systematic approach. Here we first discuss the design principles of microphysiological systems with a focus on the anatomy and physiology of organs, and then review the commonly used fabrication techniques and biomaterials for microphysiological systems. Subsequently, we discuss the recent development of microphysiological systems, and provide our perspectives on advancing microphysiological systems for preclinical investigation and drug discovery of human disease.
Subject(s)
Drug Discovery , Lab-On-A-Chip Devices , Animals , HumansABSTRACT
The present study aims to evaluate effect of hydroxyapatite (HA, Ca10(PO4)6OH2), a ceramic similar to natural bone, into AZ31B Mg alloy matrix on biomineralization and biocompatibility. The novel friction stir processing additive manufacturing route was employed to fabricate Mg-HA composites. Various HA contents (5, 10, 20 wt%) were incorporated into Mg matrix. Microstructural observation and chemical composition analysis revealed that refined Mg grains and dispersion of HA particles at micro/nanoscales were achieved in Mg-HA composites after the friction stir processing. The biomineralization evaluation were carried out using immersion experiments in simulated body fluid followed by mineral morphology observation and chemical composition analysis. The wettability measurements were conducted to correlate the biomineralization behavior. The results showed improvement in wettability and bone-like Ca/P ratio in apatite deposit on the composites compared to as-received Mg. In addition, the increase of blood compatibility, cell viability and spreading were found in the higher HA content composites, indicating the improved biocompatibility. Therefore, friction stir processed Mg-20 wt%HA composite exhibited the highest wettability and better cell adhesion among other composites due to the effect of increased HA content within Mg matrix.
ABSTRACT
Most living tissues exhibit the specific stiffness, which has been known to have profound influence on cell behaviors, yet how the stiffness affects cellular responses to engineered nanomaterials has not been elucidated. Particularly, discrepancies exist between in vitro and in vivo nanotoxicological studies. Here, we investigated the effects of substrate stiffness on the fibrogenic responses of normal human lung fibroblasts (NHLFs) to multiwalled carbon nanotubes (MWCNTs). NHLFs were grown on polyacrylamide (PAAm) hydrogels with the stiffness comparable to that of human normal and fibrotic lung tissues, and treated with MWCNTs for various time. The fibrogenic responses, including cell proliferation, reactive oxygen species production, and collagen I expression, of NHLFs to MWCNTs were observed to be regulated by substrate stiffness in a time-dependent manner. NHLFs generally were rounded on soft hydrogels and required a long treatment time to exhibit fibrogenic responses, while on stiff hydrogels the cells were well-spread with defined stress fibers and short-time MWCNTs treatment sufficiently induced the fibrogenic responses. Mechanistic studies showed that MWCNTs induced fibrogenesis of NHLFs through promoting expression and phosphorylation of focal adhesion kinase (FAK), while attenuating intracellular tension in the cells on stiff gels could increase MWCNTs uptake and thus elevate the induced fibrogenic responses. Moreover, we proposed a time-stiffness superposition principle to describe the equivalent effects of treatment time and substrate stiffness on nanomaterials-induced fibrogenesis, which suggested that increasing substrate stiffness expedited fibrogenesis and shed light on the rational design of in vitro models for nanotoxicological study.
Subject(s)
Collagen Type I/metabolism , Fibroblasts/metabolism , Lung/cytology , Nanotubes, Carbon/adverse effects , Cell Line , Cell Movement , Collagen Type I/analysis , Elasticity , Fibroblasts/pathology , Focal Adhesion Protein-Tyrosine Kinases/analysis , Focal Adhesion Protein-Tyrosine Kinases/metabolism , Humans , Lung/metabolism , Lung/pathology , Nanotubes, Carbon/chemistry , Pulmonary Fibrosis/etiology , Pulmonary Fibrosis/metabolism , Pulmonary Fibrosis/pathology , Reactive Oxygen Species/analysis , Reactive Oxygen Species/metabolismABSTRACT
Since 2010, the porcine epidemic diarrhea coronavirus (PEDV) has caused significant damage to the global pork industry. However, classical PEDV vaccine strains only provide limited protection against emerging strains. In this study, we successfully isolated and attenuated the PEDV epidemic strain Zhejiang08, which was characterized by good cell adaptation and high-titer production 48 h post infection in Vero E6 cells. The attenuated virus induced a high level of virus-specific neutralizing antibodies until 120 days after immunization in piglets and provided complete protection when challenged with an emerging virus strain on day 14 post immunization. Moreover, the capability to activate dendritic cells (DCs) of this isolate was identified. Higher expression levels of IL-12 and IFN-γ were recorded in DCs after treatment with Zhejiang08 for 24 h. Furthermore, genome sequencing and phylogenetic analysis revealed high homology between the main antigen epitopes of Zhejiang08 and PEDV pandemic isolates following 2011. Combining the glycosylation site prediction results and their distribution within the spatial structure of the S protein, led to the conclusion that the observed more effective host immune response of Zhejiang08 compared to CV777 was possibly associated with a lack of the potential glycosylation site in the 296 amino acids of the S protein. In summary, we illustrated that the attenuated virus represents a promising vaccine candidate.
Subject(s)
Coronavirus Infections/veterinary , Dendritic Cells/immunology , Porcine epidemic diarrhea virus/immunology , Swine Diseases/prevention & control , Viral Vaccines/immunology , Animals , Antibodies, Neutralizing/blood , Antibodies, Viral/blood , Coronavirus Infections/prevention & control , Gene Expression , Glycosylation , Interferon-gamma/biosynthesis , Interleukin-12/biosynthesis , Swine , Vaccines, Attenuated/administration & dosage , Vaccines, Attenuated/immunology , Vaccines, Attenuated/isolation & purification , Viral Vaccines/administration & dosage , Viral Vaccines/isolation & purificationABSTRACT
OBJECTIVE: This study aimed to assess the association between plasma bone morphogenetic protein-2 (BMP-2) level and in-stent restenosis in patients with coronary artery disease. METHODS: A total of 96 patients who underwent percutaneous coronary intervention (PCI) and were followed up after PCI were enrolled in this study. 47 patients diagnosed with in-stent restenosis (ISR) were recruited to ISR group and 49 patients without ISR were recruited to Control group according to the results of coronary angiography (CAG). Baseline characteristic data were collected, and plasma BMP-2 level was evaluated. The results were analyzed using logistic regression. RESULTS: There were 47 patients in the ISR group and 49 patients in the Control group. Plasma levels of BMP-2 were higher in the ISR group than in the non-ISR group [20.96 (18.44, 27.05) pg/ml vs. 29.53 (25.03, 34.07) pg/ml, P<0.01]. Furthermore, the ISR group had significantly longer stent lengths and lower stent diameters than the Control group (P<0.01 and P<0.01, respectively). In multivariate analysis, BMP-2 level, diabetes, stent length and stent diameter were independently associated with ISR [odds ratio (OR)=1.11, 95% confidence interval (CI)=1.03-1.18, P<0.01; OR=4.75, 95% CI=(1.44-15.61), P=0.01; OR=1.06, 95% CI=(1.02-1.11), P<0.01; and OR=0.15, 95% CI=(0.02-0.95), P=0.04, respectively]. CONCLUSIONS: Increased BMP-2 levels were independently associated with ISR in patients with coronary artery disease. Plasma BMP-2 may be useful in predicting ISR.
Subject(s)
Bone Morphogenetic Protein 2/blood , Coronary Artery Disease/blood , Coronary Restenosis/blood , Coronary Artery Disease/diagnosis , Coronary Artery Disease/surgery , Female , Humans , Logistic Models , Male , Middle Aged , Percutaneous Coronary InterventionABSTRACT
2-(4-Fluorophenyl)-quinazolin-4(3H)-one (FQ) was synthesized, and its structure was identified with (1)H nuclear magnetic resonance ((1)H NMR), (13)C nuclear magnetic resonance ((13)C NMR), fourier transform infrared spectroscopy (FTIR), and high resolution mass spectrometry (HRMS). From the enzyme analysis, the results showed that it could inhibit the diphenolase activity of tyrosinase (IC50=120±2µM). Furthermore, the results of kinetic studies showed that the compound was a reversible mixed-type inhibitor, and that the inhibition constants were determined to be 703.2 (KI) and 222.1µM (KIS). The results of fluorescence quenching experiment showed that the compound could interact with tyrosinase and the substrates (tyrosine and l-DOPA). Molecular docking analysis revealed that the mass transfer rate was affected by FQ blocking the enzyme catalytic center. In brief, current study identified a novel tyrosinase inhibitor which deserved further study for hyperpigmentation drugs.
Subject(s)
Enzyme Inhibitors/chemistry , Enzyme Inhibitors/pharmacology , Monophenol Monooxygenase/antagonists & inhibitors , Quinazolinones/chemistry , Quinazolinones/pharmacology , Streptomyces/enzymology , Halogenation , Kinetics , Levodopa/metabolism , Molecular Docking Simulation , Monophenol Monooxygenase/metabolism , Tyrosine/metabolismABSTRACT
The objective of this study was to assess the structure, anti-tyrosinase activity, and mechanism of proanthocyanidins extracted from Rhododendron pulchrum leaves. Results obtained from mass spectra of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and high performance liquid chromatography electrospray ionization mass spectrometry (HPLC-ESI-MS) revealed that proanthocyanidins were complex mixtures of procyanidins, prodelphinidins, propelargonidins, and their derivatives, among which procyanidins were the main components. The anti-tyrosinase analysis results indicated that the mixtures were reversible and mixed competitive inhibitors of tyrosinase. Interactions between proanthocyanidins with substrate (L-tyrosine and 3,4-dihydroxyphenylalanine) and with copper ions were the important molecular mechanisms for explaining their efficient inhibition. This research would provide scientific evidence for the use of R. pulchrum leaf proanthocyanidins as new novel tyrosinase inhibitors.
Subject(s)
Enzyme Inhibitors/chemistry , Enzyme Inhibitors/pharmacology , Monophenol Monooxygenase/antagonists & inhibitors , Plant Leaves/chemistry , Proanthocyanidins/chemistry , Proanthocyanidins/pharmacology , Rhododendron/chemistry , Agaricales/enzymology , Copper/pharmacology , Drug Interactions , Enzyme Inhibitors/isolation & purification , Enzyme Inhibitors/metabolism , Molecular Docking Simulation , Monophenol Monooxygenase/metabolism , Proanthocyanidins/isolation & purification , Proanthocyanidins/metabolismABSTRACT
Proanthocyanidins were purified from avocado (Persea americana) fruit, and their structures were analyzed by matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF MS) and high-performance liquid chromatography-electrospray ionization-QTRAP mass spectrometry (HPLC-ESI-QTRAP MS) techniques. The results obtained from mass spectrometry (MS) analysis demonstrated that the proanthocyanidins were homo- and heteropolymers of procyanidins, prodelphinidins, propelargonidins, and procyanidin gallate. From the enzyme analysis, the results showed that they could inhibit the monophenolase and diphenolase activities of tyrosinase. The inhibition mechanism of the proanthocyanidins on the enzyme was further studied, and the results indicated that they were reversible and competitive inhibitors. Finally, the results acquired from molecular docking, fluorescence quenching, and copper ion interacting tests revealed that adjacent hydroxyl groups on the B ring of proanthocyanidins could chelate the dicopper catalytic center of the enzyme. In addtion, proanthocyanidins were proven to be an efficient quencher of substrates. This study would lay a scientific foundation for their use in agriculture, food, and nutrition industries.