A comparative study on the use of ultra-low dose computed tomography scans with conventional computed tomography scans for the evaluation of proximal tibia intra-articular fractures.

Purpose: A rise in the need of preoperative CT assessment of proximal tibial intra-articular fractures has given rise to an increased load of radiation exposure. This comparative study aims at assessing the efficacy of low dose CT scan by collating images of tibial plateau fractures produced by low dose CT scan with that of conventional dose CT scan. Furthermore, the study aims at computing the comprehensive reduction in the effective dosage of radiation when low dose CT scan is employed for assessing these fractures. Methods: The study comprise of 23 cases of proximal tibial intra-articular fractures (confirmed by initial radiographs). Low-dose CT scan of the injured limb was preceded by conventional dose CT scan for generating images that were assessed and reported independently by five (single blinded) radiologists (using Schatzker's CT based classification). Quantification of fracture was done to compare them statistically. Results: A sensitivity of 93.94 % and positive predictive value of 93.92 % was observed on comparing images from low dose and conventional dose CT scan. An effective reduction of 89.81 % in overall dosage of radiation exposure was observed. Conclusion: Near equal quality images were generated by low dose CT scan as compared to conventional dose CT scan, thereby demonstrating its non-inferiority with an effective reduction of 89.81 % in overall dosage of radiation exposure.

Preoperative estimation of humerus intramedullary nail length using clinical landmarks.

PURPOSE: Intramedullary interlocking nailing is one of the accepted methods of treating humerus diaphyseal fractures. Appropriate nail length and diameter are of paramount importance to achieve a stable fracture fixation. Estimating the nail length can be as challenging in certain cases as it is important. This study aims to provide an easy-to-use formula utilizing clinical measurements from contra lateral arm to accurately estimate humeral nail length. METHODS: This descriptive cross-sectional study was conducted at 3 tertiary care hospitals in Mangalore, India. Patients above the age of 18 years coming to the outpatient department with elbow, shoulder or arm complaints requiring radiological investigation from July 2021 to July 2022 were included. Patients with fractures or dislocations of upper limbs, malunited or non-united fractures of upper limbs, congenital or developmental deformities and patients with open growth plates were excluded. Patients' variables (like age and gender), radiological humerus length and contralateral arm clinical measurements were recorded. An independent samples t-test was used for univariate analysis, and linear regression analysis was done to estimate the desired nail length using the clinical measurement of the humerus (cm) in both genders separately. The significance level was set at p < 0.05. RESULTS: Our study included 204 participants of which 108 were male and 96 were female. The formula for predicting humeral nail length in males is (-2.029) + (0.883 × clinical measurement). The formula for females is 1.862 + (0.741 × clinical measurement). A simplified formula to determine humeral nail length is 0.9 clinical length - 2 cm (in males) and 0.7 × clinical length + 2 cm (in females). CONCLUSION: To improve the stability of fixation with intramedullary nails it is imperative to select the appropriate nail length. There have been studies that devised reliable methods of determining nail lengths in the tibia and femur using preoperative clinical measurements. A similar clinical method of determining humeral nail length is lacking in the literature. Our study was able to correlate radiological lengths of the humerus medullary canal with clinical measurements performed using anatomical landmarks to arrive at a formula. This allows for a reliable and easy nail length determination preoperatively.

A comparative analysis of distal locked and unlocked long proximal femoral nail antirotation (PFNA-II) in the fixation of stable intertrochanteric fractures.

PURPOSE: Long proximal femoral nail anti-rotation (PFNA-II) is a preferred implant in recent years for fixation of pertrochanteric fractures, especially in osteoporotic patients. The purpose of this study is to prospectively investigate the effect of distal locking in long PFNA-II fixation of stable intertrochanteric fractures. METHODS: A total of 58 patients with isolated stable intertrochanteric fractures and treated in our hospital during the study period of 2017-2019 by distal locked or unlocked long PFNA-II fixation were included in this study. Patients who had multiple injuries or open fractures were excluded. There were 40 female and 18 male patients, with 33 affecting the left side and 25 the right side. Of them, 31 belonged to the distal locked group (group A) and 27 to the unlocked group (group B). Surgical procedures and implants used in both groups were similar except for the distal locking of the nails. General data (age, gender, fracture side, etc.) showed no significant difference between two groups (all p > 0.05). The intraoperative parameters like operative time, radiation exposure and follow-up parameters like functional and radiological outcomes were recorded and compared. Statistical tests like the independent samples t-test Fischer's exact and Chi-square test were used to analyze association. RESULTS: The distribution of the fractures according to AO/OTA classification and 31A1.2 type of intertrochanteric fractures were most common in our study. All the included fractures united and the average functional outcome in both groups were good and comparable at the end of one year. The operative time (mL, 107.1 ± 12.6 vs. 77.0 ± 12.0, p < 0.001) and radiation exposure (s, 78.6 ± 11.0 vs. 40.3 ± 9.3, p < 0.001) were significantly less among the patients in group B. Fracture consolidation, three months after the operative procedures, was seen in a significantly greater proportion of patients in group B (92.6% vs. 67.7%, p = 0.025). Hardware irritation because of distal locking bolt was exclusively seen in group A, however this was not statistically significant (p = 0.241). CONCLUSION: We conclude that, in fixation of stable intertrochanteric fractures by long PFNA-II nail, distal locking not only increases the operative time and radiation exposure but also delays the fracture consolidation and increases the chances of hardware irritation, and hence is not required.

Case of bilateral hip joint Charcot arthropathy in a paediatric patient.

An adolescent girl came with swelling of both thighs with difficulty in walking for a few months. Based on clinical, and radiological evaluation and nerve conduction studies, she was diagnosed to be having bilateral hips Charcot's arthropathy due to hereditary sensory autonomic neuropathy type 4. Other common causes of Charcot arthropathy were ruled out. The patient was conservatively managed and parents were educated about preventive measures. Through this case report, we want to highlight the myriad number of manifestations and clinical presentations of a child presenting with hereditary sensory autonomic neuropathy type 4.

"Screw First" Technique to Get Past Nail-Jig Mismatch in Proximal Femoral Nailing.

Proximal femoral nailing is the gold standard of surgical treatment for unstable intertrochanteric hip fractures. One of the intraoperative complications encountered in this procedure is the nail-jig mismatch due to causes such as manufacturing errors and fatigue deformation of sleeves or jig. Nail-jig mismatch leads to eccentric placement of guidewire within the screw slots of PFN and subsequent difficulty in reaming and screw insertion. The potential complications of this include guide wire deformation, breakage, nail damage and screw malposition. We propose a simple and effective technique to tackle this complication, called as "Screw first" technique. The principle of this technique is to utilize screws as guide wire sleeves to effectively centralize the guidewire position within nail slots. On identifying a mismatch by the eccentric position of guidewire, a long screw is first inserted partially till its shaft engages into the screw slot allowing subsequent insertion of a guidewire which assumes a centralized position, thus bypassing the mismatch of jig. Following this, the usual steps of reaming and final screw insertion are undertaken. This method is effective, simple, quick and requires no special instrumentation.

Neurogenic heterotopic ossificans of hips in a case of expanded dengue syndrome following critical illness polyneuropathy.

We present a case of 71-year-old man with bilateral hip neurogenic heterotopic ossificans following critical illness polyneuropathy as a complication of expanded dengue syndrome. His left hip was stiff and showed a circumferential ossific mass. After initial medical management, the patient underwent excision of ossific mass using posterior approach. For adequate excision, femoral head and neck were resected and a hybrid total hip arthroplasty was performed. The patient was followed up for 2 years and showed good clinical outcome without recurrence of heterotopic ossification. This case highlights the rare aetiology of neurogenic heterotopic ossification which is critical illness polyneuropathy following expanded dengue syndrome. It highlights that adequate resection and a total hip arthroplasty can be a viable option in selected cases of circumferential heterotopic ossification in old individuals.

Comparison of Posterior and Lateral Surface Plating for Type B Weber Lateral Malleoli Fractures.

PURPOSE: The purpose of this study is to compare the functional outcomes, radiological outcomes, complication rates, and hardware removal between lateral and posterior surface plating in isolated type B Weber lateral malleolus fractures. METHODS: It was a retrospective study that compared the outcomes of type B Weber lateral malleoli fractures treated by either lateral surface or posterior surface plating. Radiological and functional outcomes were assessed at regular intervals. The follow-up details and the complications and need for implant removal were collected from the hospital records. RESULTS: Our study included 60 patients (male-35 and female-25). The mean age was 41.7 ± 10.5 years. In all, 28 (46.7%) patients received lateral surface plating and 32 (53.3%) patients received posterior surface plating. The mean time gap between the injury and the surgery was significantly more among patients who underwent lateral plate insertion (P < .001). The mean operative time required for both the procedures was comparable, hence nonsignificant (P = .576). The mean American Orthopaedic Foot and Ankle Society score (AOFAS) after 2 years of operation was significantly higher for posterior plate insertion (P = .014). The complication rates as well as the implant removal rates were higher in patients with lateral plating (P < .05). CONCLUSION: Posterior surface plating can be considered as the procedure of choice for isolated type B Weber lateral malleolus fractures with respect to better functional outcome, lesser complications rates, and need for implant removal. LEVEL OF EVIDENCE: Level III: Economic/decision.

Neglected Broken Femoral Intramedullary Nail Resulting in an Urethrocutaneous Fistula.

A femur fracture is one of the most commonly encountered fractures by orthopaedicians worldwide. Being one of the longest and strongest bones in the body, it is one of the principal load-bearing bones of the lower extremity. Various modalities of fixation have been tried and tested for femur fracture but the most accepted fixation modality for diaphyseal femur fracture worldwide is the interlocking intramedullary nailing. However, intramedullary nailing is not free of any complications. Complications such as infection, non-union, malunion, limb length discrepancy due to wrong size nail, screw or nail breakage, and injury to neurovascular structures while passing guidewire or drilling for the interlocking bolt are commonly reported. We report a case of a patient who presented with a neglected broken femoral nail which resulted in an urethrocutaneous fistula. As per our literature review, this complication has never been reported before.

Accuracy in the Execution of Pre-operative Plan for Limb Alignment and Implant Positioning in Robotic-arm Assisted Total Knee Arthroplasty and Manual Total Knee Arthroplasty: A Prospective Observational Study.

AIM: The objective of the study is to compare the accuracy of implant positioning and limb alignment achieved in robotic-arm assisted total knee arthroplasty(RATKA) and manual total knee arthroplasty(MTKA) to their respective preoperative plan. PATIENTS AND METHODS: This was a prospective observational study conducted in a tertiary care centre between August 2018 and January 2020. 143 consecutive RATKA(105 patients) and 151 consecutive MTKA(111 patients) performed by two experienced arthroplasty surgeons were included. Two independent observers evaluated the accuracy of implant positioning by measuring the radiological parameters according to the Knee-Society-Roentgenographic-Evaluation-System and limb alignment from postoperative weight-bearing scanogram. Outcomes were defined, based on the degree of deviation of measurements from the planned position and alignment, as excellent(0-1.99°), acceptable(2.00-2.99°) and outlier(≥ 3.00°). RESULTS: There were no systematic differences in the demographic and baseline characteristics between RATKA and MTKA. Statistically significant outcomes were observed favouring robotic group for postoperative mechanical axis (p < .001), coronal inclination of the femoral component (p < 0.001), coronal inclination of tibial component (p < 0.001), and sagittal inclination of tibial component (p < 0.001). There was no significant difference in the sagittal inclination of the femoral component (p = 0.566). The percentage of knees in the 'excellent' group were higher in RATKA compared to MTKA. There was absolutely no outlier in terms of limb alignment in the RATKA group versus 23.8% (p < 0.001) in the MTKA group. All the measurements showed high interobserver and intraobserver reliability. CONCLUSION: Robotic-arm assisted TKA executed the preoperative plan more accurately with respect to limb alignment and implant positioning compared to manual TKA, even when the surgeons were more experienced in the latter. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s43465-020-00324-y.

Correlation of Flexor Pollicis Longus Tendon Status by Ultrasonography with Plate Position on Radiographs Following Volar Plate Fixation of Distal Radius Fractures with Pronator Quadratus Repair.

BACKGROUND: Purpose was to correlate flexor pollicis longus tendon (FPL) attrition using Ultrasonography with plate position on radiographs following volar locked compression plate fixation (LCP) in patients who have undergone pronator quadratus (PQ) repair for distal radius fractures. METHODS: Status of flexor pollicis longus tendon was analyzed by ultrasonography in patients who underwent volar locked compression plating with pronator quadratus repair at a minimum of one year follow up. Soong's criteria was used to assess the plate position and then correlated the ultrasonography findings of flexor pollicis longus. RESULTS: There were 33 patients included in our study, of which 15 belonged to Soong's grade zero, 10 were grade one and eight were grade two. Flexor pollicis longus attrition was noted in all cases with grade two plating. CONCLUSION: Pronator quadratus repair may not prevent attritional changes in higher grades of Soong's, hence follow up may be required in these patients to identify attritional changes and early implant removal to prevent complications.

Post-traumatic bilateral posterior hip dislocations with femoral head fracture on one side and acetabular fracture on the other side: a very rare presentation.

Hip dislocations are common orthopaedic emergencies which need early intervention to have a better outcome. They usually occur as a result of high energy trauma with motor vehicle accidents being the most common cause followed by fall from height. Posterior hip dislocation is more common than anterior. However, bilateral hip dislocations are rare compared with unilateral. Here we report our case with bilateral posterior hip dislocation with one side having head of femur fracture and contralateral side acetabulum fracture. Both hips were reduced under general anaesthesia on the same day of the trauma. Staged definitive treatment was carried out. The patient had an early recovery with no complications. This case represents an unusual, type of injury resulting from a high speed motor vehicle accident. Early diagnosis, immediate resuscitation and reduction of the hip joints followed by a careful and planned definitive treatment is necessary to have a better outcome.

Accuracy of tibial component positioning in the robotic arm assisted versus conventional unicompartmental knee arthroplasty.

BACKGROUND: Our study aims to determine the planned accuracy of the tibial component placement in robotic arm assisted unicompartmental knee arthroplasty (UKA) versus the conventional jig based UKA of the initial cases done in India for the first time with this particular robotic system.Materials & Methods: Study group 1 consisted of patients who underwent robotic arm (MAKO, Stryker, USA) assisted UKA. Group 2 consists of patients who underwent a standard conventional jig based (Oxford knee, Biomet, UK). Post-operative radiographs were taken to determine the Tibial Implant position and orientation which were compared to their preoperative plan respectively by two independent observers. The mean error value was obtained for both study groups respectively and compared to determine the accuracy of the post-operative tibial implant placement. RESULTS: In the Robotic arm assisted UKA, the deviation of post-operative varus angle from preoperative planned angle was about 0.43° and post-operative Tibial slope alignment differed from preoperative plan was 0.41°. In the Conventional UKA group post-operative varus angle differed from preoperative planned angle by about 2.12° and post-operative Tibial slope alignment deviation from preoperative plan was 2.47°. CONCLUSIONS: Robotic arm assisted system was more accurate compared to the conventional jig-based technique in achieving the planned orientation and alignment of the tibial implant in the initial learning phase of this particular Robotic System used for the first time in India. MESH TERMS: partial knee replacement, robotic assisted surgery.

Challenges in successful management of haemophilic knee arthropathy: Our experience in a tertiary centre.

BACKGROUND: Haemophilia is characterized by a partial or complete deficiency of clotting factor VIII or IX. The repeated bleeding episodes into the joints contributes to subsequent chronic arthropathy which debilitates the patient and affects the quality of life. There are lot of hurdles in successful management of such patients. We present our experience in dealing such patients. MATERIALS AND METHODS: 24 patients (27 knees) with haemophilic knee arthropathy were included. The preoperative VAS (Visual Analogue Scale) and KSS (Knee Society Score) were assessed. All underwent total knee arthroplasty with stemmed constrained prosthesis. Postoperatively VAS and KSS were analysed at the end of 12 months. RESULTS: The mean preoperative VAS was 8.2 (Range: 7-10), mean KSS clinical score was 39.9 (Range: 12-61) and mean KSS functional score was 51.4(Range: 20-70). The mean postoperative VAS was 2.7(Range: 2-4), mean KSS clinical score was 70.5 (Range: 61-80) and mean KSS functional score was 74.2(Range: 60-80). There was statistical significant difference between preoperative and post-operative scores. At the end of 12 months, 17 patients (63%) had good outcome, seven patients (26%) had fair and three patients (11%) had excellent outcome as per the KSS scores. CONCLUSIONS: Total knee arthroplasty has good outcome with respect to clinical as well as functional outcome in haemophilic arthropathy. Although the results and outcome of total knee arthroplasty in haemophilic knee arthropathy may still be inferior to the results seen in a normal individual, a multidisciplinary approach yields a better functional and quality of living in such haemophilic patients.

Post-traumatic wind swept deformity: five volar carpometacarpal dislocations.

Carpometacarpal (CMC) joint dislocation other than thumb are rare injuries and can be easily missed. These injuries account for <1% of all hand injuries and are frequently overlooked or missed. CMC dislocations can occur either in dorsal or volar direction and be associated with fractures. However, dorsal dislocation is more commonly encountered than volar dislocation. Volar CMC joint dislocations are rare and need a high level of suspicion for diagnosing and prevention of complications. We present a 36-year-old woman with post-traumatic neglected volar dislocation of all the five CMC joints leading to a windswept deformity of the hand.

Simultaneous combined complete tear of radial and ulnar collateral ligaments of thumb in an adolescent.

Isolated tear of collateral ligaments of thumb are common but combined injuries of both radial and ulnar collateral ligaments are rare. These cases are reported in athletes involved in high-impact sports. Here, we report a case of a 15-year-old boy with pain at base of the thumb and instability following low-impact sporting activity. On subsequent clinicoradiological assessment, simultaneous combined complete tear of both radial and ulnar collateral ligaments of the thumb was noted. Delayed primary repair of both collateral ligaments was done. This case highlights the rarity of this type of injury in an adolescent and also the use of appropriate clinical tests and imaging modalities for early diagnosis of such injuries. Restoration of joint stability as early as possible either by repair or reconstruction of ligaments needs to be considered to prevent secondary osteoarthritis of metacarpophalangeal joint.

Bilateral tarsal tunnel syndrome attributed to bilateral fibrous tarsal coalition and symmetrical hypertrophy of the sustentaculum tali.

Tarsal tunnel syndrome (TTS) is one of the frequently encountered entrapment neuropathies of the lower limb. Most often the aetiology is considered to be idiopathic. However, it has to be thoroughly investigated to rule out diverse extrinsic and intrinsic causes. The sustentaculum tali (ST) forms the superior part of the distal tarsal tunnel, and any increase in its size may result in irritation of the tibial nerve or its branches, the medial and lateral plantar nerves or decrease the overall volume of the tarsal tunnel culminating to clinical features of TTS. A hypertrophied ST is an extremely rare cause for TTS, and we report perhaps a first case of bilateral TTS in a young adult due to bilateral symmetrical hypertrophied ST which in turn was a result of bilateral fibrous tarsal coalition. Staged bilateral surgical excision of the hypertrophied part of ST and the underlying fibrous tarsal coalition ensured prompt symptomatic relief.

Late presented case of distal humerus epiphyseal separation in a newborn.

The incidence of traumatic bone injuries occurring during birth is rare (1 per 1000 live births). Of all long bone fractures, the humerus is one of the commonest bones to be involved. However, distal humeral epiphyseal separation is rare and has seldom been written up in case reports and small case series. It warrants some critical assessment and appropriate attention. This injury is sometimes missed as it is difficult to diagnose at initial presentation. It may be mistaken for dislocation of the elbow, osteomyelitis, septic arthritis or brachial plexus injury, owing to lack of movement of the upper limb. Knowledge of its clinical and radiological findings will enable the treating physician to diagnose it at the appropriate time. Masterful observation is adequate treatment for this condition, and leads to a better clinical and radiological outcome. Timely diagnosis with an optimistic prognosis will prevent unnecessary parental apprehension.

The phytochemistry, traditional uses and pharmacology of Piper Betel. linn (Betel Leaf): A pan-asiatic medicinal plant.

Since antiquity, Piper betel. Linn, commonly known as betel vine, has been used as a religious, recreational and medicinal plant in Southeast Asia. The leaves, which are the most commonly used plant part, are pungent with aromatic flavor and are widely consumed as a mouth freshener. It is carminative, stimulant, astringent and is effective against parasitic worms. Experimental studies have shown that it possess diverse biological and pharmacological effects, which includes antibacterial, antifungal, larvicidal, antiprotozal, anticaries, gastroprotective effects, free radical scavenging, antioxidant, anti-inflammatory hepatoprotective, immunomodulatory, antiulcer and chemopreventive activities. The active principles hydroxychavicol, allylpyrocatechol and eugenol with their plethora of pharmacological properties may also have the potential to develop as bioactive lead molecule. In this review, an attempt is made to summarize the religious, traditional uses, phytochemical composition and experimentally validated pharmacological properties of Piper betel. Emphasis is also placed on aspects warranting detail studies for it to be of pharmaceutical/clinical use to humans.