Reconstituted in vitro systems to reveal the roles and functions of septins.

Septins are essential cytoskeletal proteins involved in key cellular processes and have also been implicated in diseases from cancers to neurodegenerative pathologies. However, they have not been as thoroughly studied as other cytoskeletal proteins. In vivo, septins interact with other cytoskeletal proteins and with the inner plasma membrane. Hence, bottom-up in vitro cell-free assays are well suited to dissect the roles and behavior of septins in a controlled environment. Specifically, in vitro studies have been invaluable in describing the self-assembly of septins into a large diversity of ultrastructures. Given that septins interact specifically with membrane, the details of these septin-membrane interactions have been analyzed using reconstituted lipid systems. In particular, at a membrane, septins are often localized at curvatures of micrometer scale. In that context, in vitro assays have been performed with substrates of varying curvatures (spheres, cylinders or undulated substrates) to probe the sensitivity of septins to membrane curvature. This Review will first present the structural properties of septins in solution and describe the interplay of septins with cytoskeletal partners. We will then discuss how septins interact with biomimetic membranes and induce their reshaping. Finally, we will highlight the curvature sensitivity of septins and how they alter the mechanical properties of membranes.

A human septin octamer complex sensitive to membrane curvature drives membrane deformation with a specific mesh-like organization.

Septins are cytoskeletal proteins interacting with the inner plasma membrane and other cytoskeletal partners. Being key in membrane remodeling processes, they often localize at specific micrometric curvatures. To analyze the behavior of human septins at the membrane and decouple their role from other partners, we used a combination of bottom-up in vitro methods. We assayed their ultrastructural organization, their curvature sensitivity, as well as their role in membrane reshaping. On membranes, human septins organize into a two-layered mesh of orthogonal filaments, instead of generating parallel sheets of filaments observed for budding yeast septins. This peculiar mesh organization is sensitive to micrometric curvature and drives membrane reshaping as well. The observed membrane deformations together with the filamentous organization are recapitulated in a coarse-grained computed simulation to understand their mechanisms. Our results highlight the specific organization and behavior of animal septins at the membrane as opposed to those of fungal proteins.

Bottom-Up In Vitro Methods to Assay the Ultrastructural Organization, Membrane Reshaping, and Curvature Sensitivity Behavior of Septins.

Membrane remodeling occurs constantly at the plasma membrane and within cellular organelles. To fully dissect the role of the environment (ionic conditions, protein and lipid compositions, membrane curvature) and the different partners associated with specific membrane reshaping processes, we undertake in vitro bottom-up approaches. In recent years, there has been keen interest in revealing the role of septin proteins associated with major diseases. Septins are essential and ubiquitous cytoskeletal proteins that interact with the plasma membrane. They are implicated in cell division, cell motility, neuro-morphogenesis, and spermiogenesis, among other functions. It is, therefore, important to understand how septins interact and organize at membranes to subsequently induce membrane deformations and how they can be sensitive to specific membrane curvatures. This article aims to decipher the interplay between the ultra-structure of septins at a molecular level and the membrane remodeling occurring at a micron scale. To this end, budding yeast, and mammalian septin complexes were recombinantly expressed and purified. A combination of in vitro assays was then used to analyze the self-assembly of septins at the membrane. Supported lipid bilayers (SLBs), giant unilamellar vesicles (GUVs), large unilamellar vesicles (LUVs), and wavy substrates were used to study the interplay between septin self-assembly, membrane reshaping, and membrane curvature.

Correlative AFM and fluorescence imaging demonstrate nanoscale membrane remodeling and ring-like and tubular structure formation by septins.

Septins are ubiquitous cytoskeletal filaments that interact with the inner plasma membrane and are essential for cell division in eukaryotes. In cellular contexts, septins are often localized at micrometric Gaussian curvatures, where they assemble onto ring-like structures. The behavior of budding yeast septins depends on their specific interaction with inositol phospholipids, enriched at the inner leaflet of the plasma membrane. Septin filaments are built from the non-polar self-assembly of short rods into filaments. However, the molecular mechanisms regulating the interplay with the inner plasma membrane and the resulting interaction with specific curvatures are not fully understood. In this report, we have imaged dynamical molecular assemblies of budding yeast septins on PIP2-containing supported lipid bilayers using a combination of high-speed AFM and correlative AFM-fluorescence microscopy. Our results clearly demonstrate that septins are able to bind to flat supported lipid bilayers and thereafter induce the remodeling of membranes. Short septin rods (octamers subunits) can indeed destabilize supported lipid bilayers and reshape the membrane to form 3D structures such as rings and tubes, demonstrating that long filaments are not necessary for septin-induced membrane buckling.

The ESCRT-III isoforms CHMP2A and CHMP2B display different effects on membranes upon polymerization.

BACKGROUND: ESCRT-III proteins are involved in many membrane remodeling processes including multivesicular body biogenesis as first discovered in yeast. In humans, ESCRT-III CHMP2 exists as two isoforms, CHMP2A and CHMP2B, but their physical characteristics have not been compared yet. RESULTS: Here, we use a combination of techniques on biomimetic systems and purified proteins to study their affinity and effects on membranes. We establish that CHMP2B binding is enhanced in the presence of PI(4,5)P2 lipids. In contrast, CHMP2A does not display lipid specificity and requires CHMP3 for binding significantly to membranes. On the micrometer scale and at moderate bulk concentrations, CHMP2B forms a reticular structure on membranes whereas CHMP2A (+CHMP3) binds homogeneously. Thus, CHMP2A and CHMP2B unexpectedly induce different mechanical effects to membranes: CHMP2B strongly rigidifies them while CHMP2A (+CHMP3) has no significant effect. CONCLUSIONS: We therefore conclude that CHMP2B and CHMP2A exhibit different mechanical properties and might thus contribute differently to the diverse ESCRT-III-catalyzed membrane remodeling processes.

Author Correction: Human ESCRT-III polymers assemble on positively curved membranes and induce helical membrane tube formation.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Human ESCRT-III polymers assemble on positively curved membranes and induce helical membrane tube formation.

Endosomal sorting complexes for transport-III (ESCRT-III) assemble in vivo onto membranes with negative Gaussian curvature. How membrane shape influences ESCRT-III polymerization and how ESCRT-III shapes membranes is yet unclear. Human core ESCRT-III proteins, CHMP4B, CHMP2A, CHMP2B and CHMP3 are used to address this issue in vitro by combining membrane nanotube pulling experiments, cryo-electron tomography and AFM. We show that CHMP4B filaments preferentially bind to flat membranes or to tubes with positive mean curvature. Both CHMP2B and CHMP2A/CHMP3 assemble on positively curved membrane tubes. Combinations of CHMP4B/CHMP2B and CHMP4B/CHMP2A/CHMP3 are recruited to the neck of pulled membrane tubes and reshape vesicles into helical "corkscrew-like" membrane tubes. Sub-tomogram averaging reveals that the ESCRT-III filaments assemble parallel and locally perpendicular to the tube axis, highlighting the mechanical stresses imposed by ESCRT-III. Our results underline the versatile membrane remodeling activity of ESCRT-III that may be a general feature required for cellular membrane remodeling processes.

Membrane reshaping by micrometric curvature sensitive septin filaments.

Septins are cytoskeletal filaments that assemble at the inner face of the plasma membrane. They are localized at constriction sites and impact membrane remodeling. We report in vitro tools to examine how yeast septins behave on curved and deformable membranes. Septins reshape the membranes of Giant Unilamellar Vesicles with the formation of periodic spikes, while flattening smaller vesicles. We show that membrane deformations are associated to preferential arrangement of septin filaments on specific curvatures. When binding to bilayers supported on custom-designed periodic wavy patterns displaying positive and negative micrometric radii of curvatures, septin filaments remain straight and perpendicular to the curvature of the convex parts, while bending negatively to follow concave geometries. Based on these results, we propose a theoretical model that describes the deformations and micrometric curvature sensitivity observed in vitro. The model captures the reorganizations of septin filaments throughout cytokinesis in vivo, providing mechanistic insights into cell division.

Septin-based readout of PI(4,5)P2 incorporation into membranes of giant unilamellar vesicles.

Septins constitute a novel class of cytoskeletal proteins. Budding yeast septins self-assemble into non-polar filaments bound to the inner plasma membrane through specific interactions with l-α-phosphatidylinositol-4,5-bisphosphate (PI(4,5)P2). Biomimetic in vitro assays using giant unilamellar vesicles (GUVs) are relevant tools to dissect and reveal insights in proteins-lipids interactions, membrane mechanics and curvature sensitivity. GUVs doped with PI(4,5)P2 are challenging to prepare. This report is dedicated to optimize the incorporation of PI(4,5)P2 lipids into GUVs by probing the proteins-PI(4,5)P2 GUVs interactions. We show that the interaction between budding yeast septins and PI(4,5)P2 is more specific than using usual reporters (phospholipase Cδ1). Septins have thus been chosen as reporters to probe the proper incorporation of PI(4,5)P2 into giant vesicles. We have shown that electro-formation on platinum wires is the most appropriate method to achieve an optimal septin-lipid interaction resulting from an optimal PI(4,5)P2 incorporation for which, we have optimized the growth conditions. Finally, we have shown that PI(4,5)P2 GUVs have to be used within a few hours after their preparation. Indeed, over time, PI(4,5)P2 is expelled from the GUV membrane and the PI(4,5)P2 concentration in the bilayer decreases.

The ESCRT protein CHMP2B acts as a diffusion barrier on reconstituted membrane necks.

Endosomal sorting complexes required for transport (ESCRT)-III family proteins catalyze membrane remodeling processes that stabilize and constrict membrane structures. It has been proposed that stable ESCRT-III complexes containing CHMP2B could establish diffusion barriers at the post-synaptic spine neck. In order to better understand this process, we developed a novel method based on fusion of giant unilamellar vesicles to reconstitute ESCRT-III proteins inside GUVs, from which membrane nanotubes are pulled. The new assay ensures that ESCRT-III proteins polymerize only when they become exposed to physiologically relevant membrane topology mimicking the complex geometry of post-synaptic spines. We establish that CHMP2B, both full-length and with a C-terminal deletion (ΔC), preferentially binds to membranes containing phosphatidylinositol 4,5-bisphosphate [PI(4,5)P2]. Moreover, we show that CHMP2B preferentially accumulates at the neck of membrane nanotubes, and provide evidence that CHMP2B-ΔC prevents the diffusion of PI(4,5)P2 lipids and membrane-bound proteins across the tube neck. This indicates that CHMP2B polymers formed at a membrane neck may function as a diffusion barrier, highlighting a potential important function of CHMP2B in maintaining synaptic spine structures.

The Matrix protein M1 from influenza C virus induces tubular membrane invaginations in an in vitro cell membrane model.

Matrix proteins from enveloped viruses play an important role in budding and stabilizing virus particles. In order to assess the role of the matrix protein M1 from influenza C virus (M1-C) in plasma membrane deformation, we have combined structural and in vitro reconstitution experiments with model membranes. We present the crystal structure of the N-terminal domain of M1-C and show by Small Angle X-Ray Scattering analysis that full-length M1-C folds into an elongated structure that associates laterally into ring-like or filamentous polymers. Using negatively charged giant unilamellar vesicles (GUVs), we demonstrate that M1-C full-length binds to and induces inward budding of membrane tubules with diameters that resemble the diameter of viruses. Membrane tubule formation requires the C-terminal domain of M1-C, corroborating its essential role for M1-C polymerization. Our results indicate that M1-C assembly on membranes constitutes the driving force for budding and suggest that M1-C plays a key role in facilitating viral egress.

Spreading of porous vesicles subjected to osmotic shocks: the role of aquaporins.

Aquaporin 0 (AQP0) is a transmembrane protein specific to the eye lens, involved as a water carrier across the lipid membranes. During eye lens maturation, AQP0s are truncated by proteolytic cleavage. We investigate in this work the capability of truncated AQP0 to conduct water across membranes. We developed a method to accurately determine water permeability across lipid membranes and across proteins from the deflation under osmotic pressure of giant unilamellar vesicles (GUVs) deposited on an adhesive substrate. Using reflection interference contrast microscopy (RICM), we measure the spreading area of GUVs during deswelling. We interpret these results using a model based on hydrodynamic, binder diffusion towards the contact zone, and Helfrich's law for the membrane tension, which allows us to relate the spread area to the vesicle internal volume. We first study the specific adhesion of vesicles coated with biotin spreading on a streptavidin substrate. We then determine the permeability of a single functional AQP0 and demonstrate that truncated AQP0 is no more a water channel.

The architecture of Rhodobacter sphaeroides chromatophores.

The chromatophores of Rhodobacter (Rb.) sphaeroides represent a minimal bio-energetic system, which efficiently converts light energy into usable chemical energy. Despite extensive studies, several issues pertaining to the morphology and molecular architecture of this elemental energy conversion system remain controversial or unknown. To tackle these issues, we combined electron microscope tomography, immuno-electron microscopy and atomic force microscopy. We found that the intracellular Rb. sphaeroides chromatophores form a continuous reticulum rather than existing as discrete vesicles. We also found that the cytochrome bc1 complex localizes to fragile chromatophore regions, which most likely constitute the tubular structures that interconnect the vesicles in the reticulum. In contrast, the peripheral light-harvesting complex 2 (LH2) is preferentially hexagonally packed within the convex vesicular regions of the membrane network. Based on these observations, we propose that the bc1 complexes are in the inter-vesicular regions and surrounded by reaction center (RC) core complexes, which in turn are bounded by arrays of peripheral antenna complexes. This arrangement affords rapid cycling of electrons between the core and bc1 complexes while maintaining efficient excitation energy transfer from LH2 domains to the RCs.

Ab initio and all-atom modeling of detergent organization around Aquaporin-0 based on SAXS data.

A necessary initial step for the application of small angle X-ray scattering (SAXS) as an analytical probe for structural investigations of membrane proteins in solution is the precise knowledge of the structure of spontaneously formed detergent assemblies around the protein. Following our recent article (Berthaud et al. J. Am. Chem. Soc. 2012, 134, 10080-10088) on the study of the n-dodecyl ß-D-maltopyranoside (dDM) corona surrounding Aquaporin-0 tetramers in solution, we aimed at the development of more elaborate models, exploiting the information content of the scattering data. Two additional approaches are developed here for the fit of SAXS experimental data, one based on a generalized ab initio algorithm for the construction of a coarse-grained representation of the detergent assemblies, and a second based on atomistic molecular dynamics. Accordingly, we are able to fit the SAXS experimental data and obtain a better insight concerning the structure of the detergent corona around the hydrophobic part of the Aquaporin-0 surface. The present analysis scheme represents an additional step toward future conformational studies of transmembrane proteins in solution.

Modeling detergent organization around aquaporin-0 using small-angle X-ray scattering.

Solubilization of integral membrane proteins in aqueous solutions requires the presence of amphiphilic molecules like detergents. The transmembrane region of the proteins is then surrounded by a corona formed by these molecules, ensuring a hydrophilic outer surface. The presence of this corona has strongly hampered structural studies of solubilized membrane proteins by small-angle X-ray scattering (SAXS), a technique frequently used to monitor conformational changes of soluble proteins. Through the online combination of size exclusion chromatography, SAXS, and refractometry, we have determined a precise geometrical model of the n-dodecyl ß-d-maltopyranoside corona surrounding aquaporin-0, the most abundant membrane protein of the eye lens. The SAXS data were well-fitted by a detergent corona shaped in an elliptical toroid around the crystal structure of the protein, similar to the elliptical shape recently reported for nanodiscs (Skar-Gislinge et al. J. Am. Chem. Soc. 2010, 132, 13713-13722). The torus thickness determined from the curve-fitting protocol is in excellent agreement with the thickness of a lipid bilayer, while the number of detergent molecules deduced from the volume of the torus compares well with those obtained on the same sample from refractometry and mass analysis based on SAXS forward scattering. For the first time, the partial specific volume of the detergent surrounding a protein was measured. The present protocol is a crucial step toward future conformational studies of membrane proteins in solution.

Structural information, resolution, and noise in high-resolution atomic force microscopy topographs.

AFM has developed into a powerful tool in structural biology, providing topographs of proteins under close-to-native conditions and featuring an outstanding signal/noise ratio. However, the imaging mechanism exhibits particularities: fast and slow scan axis represent two independent image acquisition axes. Additionally, unknown tip geometry and tip-sample interaction render the contrast transfer function nondefinable. Hence, the interpretation of AFM topographs remained difficult. How can noise and distortions present in AFM images be quantified? How does the number of molecule topographs merged influence the structural information provided by averages? What is the resolution of topographs? Here, we find that in high-resolution AFM topographs, many molecule images are only slightly disturbed by noise, distortions, and tip-sample interactions. To identify these high-quality particles, we propose a selection criterion based on the internal symmetry of the imaged protein. We introduce a novel feature-based resolution analysis and show that AFM topographs of different proteins contain structural information beginning at different resolution thresholds: 10 A (AqpZ), 12 A (AQP0), 13 A (AQP2), and 20 A (light-harvesting-complex-2). Importantly, we highlight that the best single-molecule images are more accurate molecular representations than ensemble averages, because averaging downsizes the z-dimension and "blurs" structural details.

Malformation of junctional microdomains in cataract lens membranes from a type II diabetes patient.

In eye core lens membranes, aquaporin-0 (AQP0) and connexins (Cx) form together well-structured supramolecular assemblies, the junctional microdomains, in which they assure water, ion, metabolite, and waste transport. Additionally, they mediate cell-cell adhesion-forming thin junctions (AQP0) and gap junctions (Cx). We have used atomic force microscopy and biochemical methods to analyze and compare the structure of junctional microdomains in human cataract lens membranes from a type II diabetes patient and healthy lens membranes from calf. A healthy intercellular junctional microdomain consists in average of approximately 150 tetragonally arranged (a = b = 65.5 A, gamma = 90 degrees) AQP0 tetramers surrounded by densely packed non-ordered connexon channels. Gap-junction connexons act as lineactants inside the membrane and confine AQP0 in the junctional microdomains. In the diabetic cataract lens, connexons were degraded, and AQP0 arrays are malformed. We conceptualize that absence of connexons lead to breakdown of cell nutrition.

[Structure and dynamic of the nucleosome core particle]. / Structure et dynamique de la particule coeur de nucléosome.

In eukaryotic cell, a few meters of DNA are compacted in nuclear compartment of a few microns. This high level of compaction is an important way to regulate gene expression. In the present paper, we present a description of the organization of DNA into its first level of compaction: the nucleosome core particle. The structure of the nucleosome has been described at an atomic resolution more than 10 years ago, where DNA is wrapped around an octamer of histones. Post-translational modifications affecting histone tails have been shown to regulate the chromatin degree of compaction and thus the gene expression and regulation. The structure of the NCP is far from being frozen and is highly dynamic. Remodeling factors can induce DNA sliding around the histones, DNA transaction processes such as transcription and replication.

Discovery of new hexagonal supramolecular nanostructures formed by squalenoylation of an anticancer nucleoside analogue.

In this study, the dynamically folded conformation of squalene (SQ) is taken advantage of to link this natural compound to the anticancer nucleoside analogue gemcitabine (gem) in order to achieve the spontaneous formation of nanoassemblies (SQgem) in water. Cryogenic transmission electron microscopy examination reveals particles (104 nm) with a hexagonal or multifaceted shape that display an internal structure made of reticular planes, each particle being surrounded by an external shell. X-ray diffraction evidences the hexagonal molecular packing of SQgem, resulting from the stacking of direct or inverse cylinders. The respective volumes of the gem and SQ molecules as well as molecular modeling of SQgem suggest the stacking of inverse hexagonal phases, in which the central aqueous core, consisting of water and gem molecules, is surrounded by SQ moieties. These SQgem nanoassemblies also exhibit impressively greater anticancer activity than gem against a solid subcutaneously grafted tumor, following intravenous administration. To our knowledge, this is the first demonstration of hexagonal phase organization with a SQ derivative.

H2A and H2B tails are essential to properly reconstitute nucleosome core particles.

The conformation of recombinant Nucleosome Core Particles (NCPs) lacking H2A and H2B histone tails (gH2AgH2B) are studied. The migration of these particles in acrylamide native gels is slowed down compared to intact reconstituted NCPs. gH2AgH2B NCPs are also much more sensitive to nuclease digestion than intact NCPs. Small angle X-ray scattering (SAXS) experiments point out that the absence of H2A and H2B tails produces small but significant conformational changes of the octamers conformation (without wrapped DNA), whereas gH2AgH2B NCP conformations are significantly altered. A separation of about 25-30 bp from the core could account for the experimental curves, but other types of DNA superhelix deformation cannot be excluded. The distorted gH2AgH2B octamer may not allow the correct winding of DNA around the core. The absence of the H2A and H2B tails would further prevent the secondary sliding of the DNA around the core and therefore impedes the stabilisation of the particle. Cryo-electron microscopy on the same particles also shows a detachment of DNA portions from the particle core. The effect is even stronger because the vitrification of the samples worsens the instability of gH2AgH2B NCPs.