Nutrient concentration in sediments accumulated in pre-treatment basins of urban LID technologies.

In this study, the contribution of pre-treatment basins of low impact development (LID) technologies to nutrient reduction performance was evaluated by understanding the distribution of nutrient in sediments accumulated in each system. The captured sediments were mostly silt to medium sand ranging from 9% to 92% of the sediments collected. Greater average N and P concentrations were found in silt particles amounting to 345 mg/kg and 696 mg/kg, respectively compared to sand and gravel. Although, N concentrations in accumulated sediments were found to be highly variable at different particle sizes (CV: 0.24 to 0.77) compared to P concentration (CV: 0.08 to 0.36) attributed to effective P treatment mechanism through deposition compared to complex nitrogen removal mechanisms. In addition, the difference between N and P concentrations of sediments collected in the pre-treatment basins of LID technologies and in-situ soil was attributed to the continuous pollutant input to the LID technologies during storm events. The study proved that pre-treatment basins of stormwater LID technologies reinforced the nutrient removal performances through sediment retention. The findings of this research may be used to design pre-treatment basins of LID technologies considering nutrients as a limiting factor.

Comparison of the treatment performance of hybrid constructed wetlands treating stormwater runoff.

This study was conducted to compare the treatment performance of two hybrid constructed wetlands (CWs) in treating stormwater runoff. The hybrid CWs were composed of a combination of free water surface (FWS) and horizontal subsurface flow (HSSF) CWs. Based on the results, strong correlation exists between potential runoff impacts and stormwater characteristics; however, the low correlations also suggest that not only the monitored parameters contribute to stormwater event mean concentrations (EMC) of pollutants, but other factors should also be considered as well. In the hydraulic and treatment performance of the hybrid CWs, a small surface area to catchment area (SA/CA) ratio, receiving a high concentration of influent EMC, will find it hard to achieve great removal efficiency; also a large SA/CA ratio, receiving low concentration of influent EMC, will find it hard to achieve great removal efficiency. With this, SA/CA ratio and influent characteristics such as EMC or load should be considered among the design factors of CWs. The performance data of the two CWs were used to consider the most cost-effective design of a hybrid CW. The optimum facility capacity (ratio of total runoff volume to storage volume) that is applicable for a target volume reduction and removal efficiency was provided in this study.

Physical design optimization of an urban runoff treatment system using Stormwater Management Model (SWMM).

The study presented the application of Stormwater Management Model (SWMM) in determining the optimal physical design properties of an established low impact development (LID) system treating road runoff. The calibration of the model was based on monitored storm events occurring from May 2010 to July 2013. It was found that the total suspended solids was highly correlated with stormwater runoff volume and dominant heavy metal constituents in stormwater runoff, such lead, zinc and copper, with a Pearson correlation coefficient ranging from 0.88 to 0.95 (P<0.05). Reducing the original ratio of the storage volume to surface area (SV/SA) of the facility and depth by 25% could match the satisfactory performance efficiency achieved in the original design. The smaller SV/SA and depth would mean a less costly system, signifying the importance of optimization in designing LID systems.

Treatment of suspended solids and heavy metals from urban stormwater runoff by a tree box filter.

Particulates, inorganic and toxic constituents are the most common pollutants associated with urban stormwater runoff. Heavy metals such as chromium, nickel, copper, zinc, cadmium and lead are found to be in high concentration on paved roads or parking lots due to vehicle emissions. In order to control the rapid increase of pollutant loads in stormwater runoff, the Korean Ministry of Environment proposed the utilization of low impact developments. One of these was the application of tree box filters that act as a bioretention treatment system which executes filtration and sorption processes. In this study, a tree box filter located adjacent to an impervious parking lot was developed to treat suspended solids and heavy metal concentrations from urban stormwater runoff. In total, 11 storm events were monitored from July 2010 to August 2012. The results showed that the tree box filter was highly effective in removing particulates (up to 95%) and heavy metals (at least 70%) from the urban stormwater runoff. Furthermore, the tree box filter was capable of reducing the volume runoff by 40% at a hydraulic loading rate of 1 m/day and below.