Macrocycle-Induced Modulation of Internuclear Interactions in Homobimetallic Complexes.

A synthetic route has been developed for a series of 3d homobimetallic complexes of Mn, Fe, Co, Ni, and Cu using three different pyridyldiimine and pyridyldialdimine macrocyclic ligands with ring sizes of 18, 20, and 22 atoms. Crystallographic analyses indicate that while the distances between the metals can be modulated by the size of the macrocycle pocket, the flexibility in the alkyl linkers used to construct the macrocycles enables the ligand to adjust the orientation of the PD(A)I fragments in response to the geometry of the [M2(µ-Cl)2]2+ core, particularly with respect to Jahn-Teller distortions. Analyses by UV-vis spectroscopy and SQUID magnetometry revealed deviations in the properties [M2(µ-Cl)2]2+-containing complexes bound by standard mononucleating ligands, highlighting the ability of macrocycles to use ring size to control the magnetic interactions of pseudo-octahedral, high-spin metal centers.

Electronic structure studies reveal 4f/5d mixing and its effect on bonding characteristics in Ce-imido and -oxo complexes.

This study presents the role of 5d orbitals in the bonding, and electronic and magnetic structure of Ce imido and oxo complexes synthesized with a tris(hydroxylaminato) [((2- t BuNO)C6H4CH2)3N]3- (TriNO x 3-) ligand framework, including the reported synthesis and characterization of two new alkali metal-capped Ce oxo species. X-ray spectroscopy measurements reveal that the imido and oxo materials exhibit an intermediate valent ground state of the Ce, displaying hallmark features in the Ce LIII absorption of partial f-orbital occupancy that are relatively constant for all measured compounds. These spectra feature a double peak consistent with other formal Ce(iv) compounds. Magnetic susceptibility measurements reveal enhanced levels of temperature-independent paramagnetism (TIP). In contrast to systems with direct bonding to an aromatic ligand, no clear correlation between the level of TIP and f-orbital occupancy is observed. CASSCF calculations defy a conventional van Vleck explanation of the TIP, indicating a single-reference ground state with no low-lying triplet excited state, despite accurately predicting the measured values of f-orbital occupancy. The calculations do, however, predict strong 4f/5d hybridization. In fact, within these complexes, despite having similar f-orbital occupancies and therefore levels of 4f/5d hybridization, the d-state distributions vary depending on the bonding motif (Ce[double bond, length as m-dash]O vs. Ce[double bond, length as m-dash]N) of the complex, and can also be fine-tuned based on varying alkali metal cation capping species. This system therefore provides a platform for understanding the characteristic nature of Ce multiple bonds and potential impact that the associated d-state distribution may have on resulting reactivity.

Synthesis of an elusive, stable 2-azaallyl radical guided by electrochemical and reactivity studies of 2-azaallyl anions.

The super electron donor (SED) ability of 2-azaallyl anions has recently been discovered and applied to diverse reactivity, including transition metal-free cross-coupling and dehydrogenative cross-coupling processes. Surprisingly, the redox properties of 2-azaallyl anions and radicals have been rarely studied. Understanding the chemistry of elusive species is the key to further development. Electrochemical analysis of phenyl substituted 2-azaallyl anions revealed an oxidation wave at E 1/2 or E pa = -1.6 V versus Fc/Fc+, which is ∼800 mV less than the reduction potential predicted (E pa = -2.4 V vs. Fc/Fc+) based on reactivity studies. Investigation of the kinetics of electron transfer revealed reorganization energies an order of magnitude lower than commonly employed SEDs. The electrochemical study enabled the synthetic design of the first stable, acyclic 2-azaallyl radical. These results indicate that the reorganization energy should be an important design consideration for the development of more potent organic reductants.

Pyridyldiimine macrocyclic ligands: Influences of template ion, linker length and imine substitution on ligand synthesis, structure and redox properties.

A series of 2,6-diiminopyridine-derived macrocyclic ligands have been synthesized via [2+2] condensation around alkaline earth metal triflate salts. The inclusion of a tert-butyl group at the 4-position of the pyridine ring of the macrocyclic synthons results in macrocyclic complexes that are soluble in common organic solvents, thereby enabling a systematic comparison of the physical properties of the complexes by NMR spectroscopy, mass spectrometry, solution-phase UV-Vis spectroscopy, cyclic voltammetry and single-crystal X-ray crystallography. Solid-state structures determined crystallographically demonstrate increased twisting in the ligand, concurrent with either a decrease in ion size or an increase in macrocycle ring size (18, 20, or 22 membered rings). The degree of folding and twisting within the macrocycle can be quantified using parameters derived from the Npyr-M-Npyr bond angle and the relative orientation of the pyridinediimine (PDI) and pyridinedialdimine (PDAI) fragments to each other within the solid state structures. Cyclic voltammetry and UV-Vis spectroscopy were used to compare the relative energies of the imine π* orbital of the redox active PDI and PDAI components in the macrocycle when coordinated to redox inactive metals. Both methods indicate the change from a methyl to hydrogen substitution on the imine carbon lowers the energy of the ligand π* system.

N-H Bond Formation at a Diiron Bridging Nitride.

Despite their connection to ammonia synthesis, little is known about the ability of iron-bound, bridging nitrides to form N-H bonds. Herein we report a linear diiron bridging nitride complex supported by a redox-active macrocycle. The unique ability of the ligand scaffold to adapt to the geometric preference of the bridging species was found to facilitate the formation of N-H bonds via proton-coupled electron transfer to generate a µ-amide product. The structurally analogous µ-silyl- and µ-borylamide complexes were shown to form from the net insertion of the nitride into the E-H bonds (E=B, Si). Protonation of the parent bridging amide produced ammonia in high yield, and treatment of the nitride with PhSH was found to liberate NH3 in high yield through a reaction that engages the redox-activity of the ligand during PCET.

Cerium(iv) complexes with guanidinate ligands: intense colors and anomalous electronic structures.

A series of cerium(iv) mixed-ligand guanidinate-amide complexes, {[(Me3Si)2NC(N i Pr)2] x CeIV[N(SiMe3)2]3-x }+ (x = 0-3), was prepared by chemical oxidation of the corresponding cerium(iii) complexes, where x = 1 and 2 represent novel complexes. The Ce(iv) complexes exhibited a range of intense colors, including red, black, cyan, and green. Notably, increasing the number of the guanidinate ligands from zero to three resulted in significant redshift of the absorption bands from 503 nm (2.48 eV) to 785 nm (1.58 eV) in THF. X-ray absorption near edge structure (XANES) spectra indicated increasing f occupancy (n f) with more guanidinate ligands, and revealed the multiconfigurational ground states for all Ce(iv) complexes. Cyclic voltammetry experiments demonstrated less stabilization of the Ce(iv) oxidation state with more guanidinate ligands. Moreover, the Ce(iv) tris(guanidinate) complex exhibited temperature independent paramagnetism (TIP) arising from the small energy gap between the ground- and excited states with considerable magnetic moments. Computational analysis suggested that the origin of the low energy absorption bands was a charge transfer between guanidinate π orbitals that were close in energy to the unoccupied Ce 4f orbitals. However, the incorporation of sterically hindered guanidinate ligands inhibited optimal overlaps between Ce 5d and ligand N 2p orbitals. As a result, there was an overall decrease of ligand-to-metal donation and a less stabilized Ce(iv) oxidation state, while at the same time, more of the donated electron density ended up in the 4f shell. The results indicate that incorporating guanidinate ligands into Ce(iv) complexes gives rise to intense charge transfer bands and noteworthy electronic structures, providing insights into the stabilization of tetravalent lanthanide oxidation states.

Magnetic Field Directed Rare-Earth Separations.

The separation of rare-earth ions from one another is challenging due to their chemical and physical similarities. Nearly all rare-earth separations rely upon small changes in ionic radii to direct speciation or reactivity. Herein, we show that the intrinsic magnetic properties of the rare-earth ions impact the separations of light/heavy and selected heavy/heavy binary mixtures. Using TriNOx3- ([{(2-t BuNO)C6 H4 CH2 }3 N]3- ) rare-earth complexes, we efficiently and selectively crystallized heavy rare earths (Tb-Yb) from a mixture with light rare earths (La and Nd) in the presence of an external Fe14 Nd2 B magnet, concomitant with the introduction of a concentration gradient (decrease in temperature). The optimal separation was observed for an equimolar mixture of La:Dy, which gave an enrichment factor of EFLa:Dy =297±31 for the solid fraction, compared to EFLa:Dy =159±22 in the absence of the field, and achieving a 99.7 % pure Dy sample in one step. These results indicate that the application of a magnetic field can improve performance in a molecular separation system for paramagnetic rare-earth cations.

Redox-Driven Chelation and Kinetic Separation of Select Rare Earths Using a Tripodal Nitroxide Proligand.

Separation of the rare-earth (RE) elements (Sc, Y, La-Lu) is challenging because of their similar chemical properties, but is necessary for their applications in renewable energy and electronic device technologies. The development of separation processes driven by kinetic factors represents a new area for this field. Herein, we disclose a novel method of separating select rare earths by reacting RE cyclopentadienides with the triradical species tris(2-tert-butylnitroxyl)benzylamine (1). The key proligand 1 was characterized using a variety of techniques including X-ray crystallography, magnetometry, and EPR spectroscopy. When applied to an equimolar mixture of La:Y cyclopentadienide complexes, different rates of chelation of these organometallic precursors by 1 were observed, affording a separation factor of 26 under the reported conditions.

Interdependent Metal-Metal Bonding and Ligand Redox-Activity in a Series of Dinuclear Macrocyclic Complexes of Iron, Cobalt, and Nickel.

This report describes an isostructural series of dinuclear iron, cobalt, and nickel complexes bound by a redox-active macrocyclic ligand. The series spans five redox levels (34-38 e-/cluster core), allowing for a detailed investigation into both the degree of metal-metal interaction and the extent of ligand-based redox-activity. Magnetometry, electrochemistry, UV-vis-NIR absorption spectroscopy, and crystallography were used in conjunction with DFT computational analyses to extract the electronic structures of the six homodinuclear complexes. The isoelectronic, 34 e- species [(3PDI2)Fe2(PMe3)2(µ-Cl)](OTf) and [(3PDI2)Co2(PMe3)2(µ-Cl)](OTf)3 exhibit metal-metal single bonds, with varying amounts of electron density delocalization into the ligand as a function of the effective nuclear charge of the metal ions. One- and two-electron reductions of [(3PDI2)Co2(PMe3)2(µ-Cl)](OTf)3 lead to isolable products, which show successive increases in both the Co-Co distances and the extent of reduction of the ligand manifold. This trend results from reduction of a Co-Co σ* orbital, which was found to be heavily mixed with the redox-active manifold of the 3PDI2 ligand. A similar trend was observed in the 37 and 38 e- dinickel complexes [(3PDI2)Ni2(PMe3)2(µ-Cl)](OTf)2 and [(3PDI2)Ni2(PMe3)2(µ-Cl)](OTf); however, their higher electron counts lead to high-spin ground states that result from occupation of a high-lying δ/δ* manifold with significant Ni-NPDI σ* character. This change in ground state configuration reforms a M-M bonding interaction in the 37 e- complex, but formation of the 38 e- species again disrupts the M-M bond alongside the transfer of electron density to the ligand.

Correction: Synthesis of novel copper-rare earth BINOLate frameworks from a hydrogen bonding DBU-H rare earth BINOLate complex.

Correction for 'Synthesis of novel copper-rare earth BINOLate frameworks from a hydrogen bonding DBU-H rare earth BINOLate complex' by Grace B. Panetti, et al., Dalton Trans., 2018, 47, 14408-14410.

A strategy to improve the performance of cerium(iii) photocatalysts.

A structural modification strategy to improve the photocatalytic performance of a series of cerium(iii) bis(guanidinate) mono(amide) molecular luminophores was demonstrated. Reducing the steric bulkiness of the amide ligand gave rise to two categories of complexes with distinct photophysical and photochemical properties. A structural parameter, the amide cone angle (θ), was applied to differentiate the two categories. Complexes with smaller cone angles (θ < 156°, category B) exhibited more reducing potentials and faster electron-transfer rates than those of complexes with larger cone angles (θ > 173°, category A). And only complexes in the category B could achieve the photocatalytic phenylation of an aryl bromide. These results demonstrated that reducing the steric bulkiness of the amide ligand improved the performance of cerium(iii) bis(guanidinate) mono(amide) photocatalysts in a systematic manner.

13C NMR Shifts as an Indicator of U-C Bond Covalency in Uranium(VI) Acetylide Complexes: An Experimental and Computational Study.

A series of uranium(VI)-acetylide complexes of the general formula UVI(O)(C≡C-C6H4-R)[N(SiMe3)2]3, with variation of the para substituent (R = NMe2, OMe, Me, Ph, H, Cl) on the aryl(acetylide) ring, was prepared. These compounds were analyzed by 13C NMR spectroscopy, which showed that the acetylide carbon bound to the uranium(VI) center, U- C≡C-Ar, was shifted strongly downfield, with δ(13C) values ranging from 392.1 to 409.7 ppm for Cl and NMe2 substituted complexes, respectively. These extreme high-frequency 13C resonances are attributed to large negative paramagnetic (σpara) and relativistic spin-orbit (σSO) shielding contributions, associated with extensive U(5f) and C(2s) orbital contributions to the U-C bonding in title complexes. The trend in the 13C chemical shift of the terminal acetylide carbon is opposite that observed in the series of parent (aryl)acetylenes, due to shielding effects of the para substituent. The 13C chemical shifts of the acetylide carbon instead correlate with DFT computed U-C bond lengths and corresponding QTAIM delocalization indices or Wiberg bond orders. SQUID magnetic susceptibility measurements were indicative of the Van Vleck temperature independent paramagnetism (TIP) of the uranium(VI) complexes, suggesting a magnetic field-induced mixing of the singlet ground-state (f0) of the U(VI) ion with low-lying (thermally inaccessible) paramagnetic excited states (involved also in the perturbation-theoretical treatment of the unusually large paramagnetic and SO contributions to the 13C shifts). Thus, together with reported data, we demonstrate that the sensitive 13C NMR shifts serve as a direct, simple, and accessible measure of uranium(VI)-carbon bond covalency.

Ni(NIXANTPHOS)-Catalyzed Mono-Arylation of Toluenes with Aryl Chlorides and Bromides.

A nickel-catalyzed cross-coupling of toluene derivatives with both aryl bromides and chlorides using a NIXANTPHOS-ligated nickel(II) complex has been developed. The key factor to success is proposed to be the catalyst activation of toluene by a cation-π complex, enabling methyl arenes (p Ka ≈ 43) to be deprotonated with the relatively mild base NaN(SiMe3)2. This method facilitates access to a variety of sterically and electronically diverse hetero- and nonheteroaryl-containing diarylmethanes.

Synthesis of novel copper-rare earth BINOLate frameworks from a hydrogen bonding DBU-H rare earth BINOLate complex.

The preparation of a novel H-bonding DBU-H+ BINOLate Rare Earth Metal complex enabled the synthesis of the first copper-Rare Earth Metal BINOLate complex (CuDBU-REMB). CuDBU-REMB was compared to the analogous Li complex using X-ray crystallography and Exchange NMR spectroscopy (EXSY). The results provide insight into the role of the secondary metal cation in the framework's stabilization.

A molecular basis to rare earth separations for recycling: tuning the TriNOx ligand properties for improved performance.

A methoxy-substituted tripodal hydroxylamine ligand, H3TriNOxOMe, was synthesized and coordinated to rare earth cations for separation purposes. Metrics of the resulting complexes were investigated and compared with their parent TriNOx3- counterparts for determination of the molecular basis for the described rare earth separation system. Addition of an electron donating group to the aryl backbone resulted in a more electron rich ligand that increased the equilbrium constant for complex dimerization five-fold. The new separation system yielded efficient Nd/Dy separations in toluene rather than benzene.

C-H Bond Addition across a Transient Uranium-Nitrido Moiety and Formation of a Parent Uranium Imido Complex.

Uranium complexes in the +3 and +4 oxidation states were prepared using the anionic PN- (PN- = ( N-(2-(diisopropylphosphino)-4-methylphenyl)-2,4,6-trimethylanilide) ligand framework. New complexes include the halide starting materials, (PN)2UIIII (1) and (PN)2UIVCl2 (2), which both yield (PN)2UIV(N3)2 (3) by reaction with NaN3. Compound 3 was reduced with potassium graphite to produce a putative, transient uranium-nitrido moiety that underwent an intramolecular C-H activation to form a rare example of a parent imido complex, [K(THF)3][(PN)UIV(═NH)[ iPr2P(C6H3Me)N(C6H2Me2CH2)]] (4). Calculated reaction energy profiles strongly suggest that a C-H insertion becomes unfavorable when a reductant is present, offering a distinctively different reaction pathway than previously observed for other uranium nitride complexes.

Palladium-Catalyzed Direct C-H Arylation of 3-(Methylsulfinyl)thiophenes.

A palladium-catalyzed direct arylation of (3-thiophene)S(O)Me derivatives has been developed. This protocol is effective for the selective synthesis of 2-arylated and 2,5-diarylated sulfinylthiophene derivatives with as low as 0.5 mol % catalyst loading. Various functional groups are well tolerated. A method to install two different aryl groups on 3-(methylsulfinyl)thiophenes is also introduced.

Understanding and Controlling the Emission Brightness and Color of Molecular Cerium Luminophores.

Molecular cerium complexes are a new class of tunable and energy-efficient visible- and UV-luminophores. Understanding and controlling the emission brightness and color are important for tailoring them for new and specialized applications. Herein, we describe the experimental and computational analyses for series of tris(guanidinate) (1-8, Ce{(R2N)C(N iPr)2}3, R = alkyl, silyl, or phenyl groups), guanidinate-amide [GA, A = N(SiMe3)2, G = (Me3Si)2NC(N iPr)2], and guanidinate-aryloxide (GOAr, OAr = 2,6-di- tert-butylphenoxide) cerium(III) complexes to understand and develop predictive capabilities for their optical properties. Structural studies performed on complexes 1-8 revealed marked differences in the steric encumbrance around the cerium center induced by various guanidinate ligand backbone substituents, a property that was correlated to photoluminescent quantum yield. Computational studies revealed that consecutive replacements of the amide and aryloxide ligands by guanidinate ligand led to less nonradiative relaxation of bright excited states and smaller Stokes shifts. The results establish a comprehensive structure-luminescence model for molecular cerium(III) luminophores in terms of both quantum yields and colors. The results provide a clear basis for the design of tunable, molecular, cerium-based, luminescent materials.

Reduction of Carbonyl Groups by Uranium(III) and Formation of a Stable Amide Radical Anion.

Methyl benzoate, N,N-dimethylbenzamide, and benzophenone were reduced by UIII [N(SiMe3 )2 ]3 resulting in uranium(IV) products. Reduction of benzophenone lead to UIV [OC⋅Ph2 )][N(SiMe3 )2 ]3 , (1.1) which forms the dinuclear complex, [N(SiMe3 )2 ]3 UIV (OCPhPh-CPh2 O)UIV [N(SiMe3 )2 ]3 (1.2), through coupling of the ketyl radical species upon crystallization. Reaction of N,N-dimethylbenzamide with UIII [N(SiMe3 )2 ]3 resulted in UIV [OC⋅(Ph)(NMe2 )][N(SiMe3 )2 ]3 (2), a uranium(IV) compound and the first example of a charge-separated amide radical. In the case of methyl benzoate, the reduction resulted in UIV (OMe)[N(SiMe3 )2 ]3 (3) and benzaldehyde as the reduced organic fragment. Compound 2 showed the ability to act as a uranium(III) synthon in its reactivity with trimethylsilyl azide, a reaction that yielded UV (=NSiMe3 )[N(SiMe3 )2 ]3 . Additionally, 2 was reduced with potassium graphite resulting in [U(µ-O)[O=C(NMe2 )(Ph)][N(SiMe3 )2 ]2 ]2 (4), a dinuclear uranium compound bridged by oxo ligands. Reduction of 2 in the presence of 15-crown-5 afforded isolation of the mono-oxo compound, [(15-crown-5)2 K][UO[N(SiMe3 )2 ]3 ] (5). The results expand the reduction capabilities of UIII complexes and demonstrate a strategy for isolating novel metal-stabilized radicals.

Ruthenium-Crosslinked Hydrogels with Rapid, Visible-Light Degradation.

Incorporation of photoresponsive molecules within soft materials can provide spatiotemporal control over bulk properties and address challenges in targeted delivery and mechanical variability. However, the kinetics of in situ photochemical reactions are often slow and typically employ ultraviolet wavelengths. Here, we present a novel photoactive crosslinker Ru(bipyridine)2 (3-pyridinaldehyde)2 (RuAldehyde), which was reacted with hydrazide-functionalized hyaluronic acid to form hydrogels capable of encapsulating protein cargo. Visible light irradiation (400-500 nm) initiated rapid ligand exchange on the ruthenium center, which degraded the hydrogel within seconds to minutes, depending on gel thickness. An exemplar enzyme cargo, TEM1 ß-lactamase, was loaded into and photoreleased from the Ru-hydrogel. To expand their applications, Ru-hydrogels were also processed into microgels using a microfluidic platform.