Hormone-mediated growth dynamics of the barley pericarp as revealed by magnetic resonance imaging and transcript profiling.

The shape of the maternal pericarp affects cereal grain mass and yield. Pericarp growth was analysed by magnetic resonance imaging (MRI), revealing topological maps of mobile water in developing pericarp of barley (Hordeum vulgare) and displaying tissue regions actively elongating in specific temporal-spatial patterns. Correlation analysis of MRI signals and growth rates reveals that growth in length is mediated by dorsal and also lateral rather than ventral regions. Growth in thickness is related to ventral regions. Switching from dorsal to ventral growth is associated with differential expression of axial regulators of the HD-ZipIII and Kanadi/Ettin types, and NPH3 photoreceptors, suggesting light-mediated auxin re-distribution. Auxin increases with the highest levels in the basal pericarp at 6 days after fertilization (DAF), together with transcriptionally up-regulated auxin transport and signalling. Gibberellin biosynthesis is transcriptionally up-regulated only later, and levels of bioactive gibberellins increase from 7 to 13 DAF, with higher levels in ventral than dorsal regions. Differential gene expression related to cell expansion indicates genes related to apoplast acidification, wall relaxation, sugar cleavage, water transport, and cell wall biosynthesis. Candidate genes potentially involved in pericarp extension are distinguished by their temporal expression, representing potential isoforms responsible for dorsal-mediated early growth in length or ventral-mediated late growth in thickness.

Online assessment of biofilm development, sloughing and forced detachment in tube reactor by means of magnetic resonance microscopy.

Magnetic resonance microscopy (MRM) was successfully applied for non-invasive online monitoring of biofilm development, sloughing, and forced detachment. Biofilm cultivation was performed in a tube reactor directly placed in the MRM scanner. Based on the differences in relaxation time of free and bound protons, the distributed water signal was allocated to the bulk and the biofilm phase. The velocity of the flowing water in the tube reactor was measured in all three directions (x, y, and z) at spatial resolutions of 78 microm. From the velocity data, maps of flow gradients (shear rates) were derived. The experiments showed that a more compact biofilm structure is sloughed off in total with nearly no biomass left on the substratum. Continued biofilm cultivation resulted in filamentous biofilm structures, which did not show any sloughing. Experiments at higher Reynolds numbers were performed in order to force biofilm detachment. Continuous measuring of proton velocity and biomass was used to characterize the different stages of biofilm development. The measurements revealed that biofilms are able to resist extremely high local shear stress being raised up to factor of 20 compared to the mean local shear stress acting on the complete biofilm surface. The maximum local shear stress of single biofilm structures exposed to flow was found to be on average seven times higher compared to the mean local shear stress of the entire biofilm surface. MRM was able to visualize and quantify the development of biofilms and interaction of biofilms with the surrounding fluid at the meso-scale. It is suggested that detachment and sloughing depends on both internal and external structural parameters.

Advanced imaging techniques for assessment of structure, composition and function in biofilm systems.

Scientific imaging represents an important and accepted research tool for the analysis and understanding of complex natural systems. Apart from traditional microscopic techniques such as light and electron microscopy, new advanced techniques have been established including laser scanning microscopy (LSM), magnetic resonance imaging (MRI) and scanning transmission X-ray microscopy (STXM). These new techniques allow in situ analysis of the structure, composition, processes and dynamics of microbial communities. The three techniques open up quantitative analytical imaging possibilities that were, until a few years ago, impossible. The microscopic techniques represent powerful tools for examination of mixed environmental microbial communities usually encountered in the form of aggregates and films. As a consequence, LSM, MRI and STXM are being used in order to study complex microbial biofilm systems. This mini review provides a short outline of the more recent applications with the intention to stimulate new research and imaging approaches in microbiology.

In vivo assessment of cold adaptation in insect larvae by magnetic resonance imaging and magnetic resonance spectroscopy.

BACKGROUND: Temperatures below the freezing point of water and the ensuing ice crystal formation pose serious challenges to cell structure and function. Consequently, species living in seasonally cold environments have evolved a multitude of strategies to reorganize their cellular architecture and metabolism, and the underlying mechanisms are crucial to our understanding of life. In multicellular organisms, and poikilotherm animals in particular, our knowledge about these processes is almost exclusively due to invasive studies, thereby limiting the range of conclusions that can be drawn about intact living systems. METHODOLOGY: Given that non-destructive techniques like (1)H Magnetic Resonance (MR) imaging and spectroscopy have proven useful for in vivo investigations of a wide range of biological systems, we aimed at evaluating their potential to observe cold adaptations in living insect larvae. Specifically, we chose two cold-hardy insect species that frequently serve as cryobiological model systems--the freeze-avoiding gall moth Epiblema scudderiana and the freeze-tolerant gall fly Eurosta solidaginis. RESULTS: In vivo MR images were acquired from autumn-collected larvae at temperatures between 0 degrees C and about -70 degrees C and at spatial resolutions down to 27 microm. These images revealed three-dimensional (3D) larval anatomy at a level of detail currently not in reach of other in vivo techniques. Furthermore, they allowed visualization of the 3D distribution of the remaining liquid water and of the endogenous cryoprotectants at subzero temperatures, and temperature-weighted images of these distributions could be derived. Finally, individual fat body cells and their nuclei could be identified in intact frozen Eurosta larvae. CONCLUSIONS: These findings suggest that high resolution MR techniques provide for interesting methodological options in comparative cryobiological investigations, especially in vivo.

Multiparametric high-resolution imaging of barley embryos by multiphoton microscopy and magnetic resonance micro-imaging.

Nonlinear optical microscopy and magnetic resonance imaging (MRI) address different properties of the sample and operate on different geometrical scales. MRI maps density and mobility of molecules tracking specific molecular signatures. Multiphoton imaging profits from the nonlinear absorption of light in the focus of a femtosecond laser source stimulating the autofluorescence of biomolecules. As this effect relies on a high light intensity, the accessible field of view is limited, but the resolution is very high (a few hundred nanometers). Here, we aim to link the different accessible scales and properties addressed in the different techniques to obtain a synoptic view. As model specimen we studied embryos of barley. Multiphoton stimulated autofluorescence images and images of second harmonic generation are achieved even down to low magnification (10x), low numerical aperture (N.A. 0.25) conditions. The overview images allowed morphological assignments and fluorescence lifetime imaging provides further information to identify accumulation of endogenous fluorophores. The second, complementary contribution from high-resolution MR images provides a 3D model and shows the embedding of the embryo in the grain. Images of the proton density were acquired using a standard 3D spin-echo imaging pulse sequence. Details directly comparable to the low magnification optical data are visible. Eventually, passing from the MR images of the whole grain via low magnification to high resolution autofluorescence data bridges the scale barrier, and might provide the possibility to trace transport and accumulation of, e.g., nutrients from large structure of the plant to the (sub-) cellular level.

Magnetic resonance imaging of the siliceous skeleton of the demosponge Lubomirskia baicalensis.

The skeletal elements (spicules) of the demosponge Lubomirskia baicalensis were analyzed; they are composed of amorphous, non-crystalline silica, and contain in a central axial canal the axial filament which consists of the enzyme silicatein. The axial filament, that orients the spicule in its longitudinal axis exists also in the center of the spines which decorate the spicule. During growth of the sponge, new serially arranged modules which are formed from longitudinally arranged spicule bundles are added at the tip of the branches. X-ray analysis revealed that these serial modules are separated from each other by septate zones (annuli). We describe that the longitudinal bundles of spicules of a new module originate from the apex of the earlier module from where they protrude. A cross section through the oscular/apical-basal axis shows that the bundle rays are organized in a concentric and radiate pattern. High resolution magnetic resonance microimaging studies showed that the silica spheres of the spicules in the cone region contain high amounts of 'mobile' water. We conclude that the radiate accretive growth pattern of sponges is initiated in the apical region (cones) by newly growing spicules which are characterized by high amounts of 'mobile' water; subsequently spicule bundles are formed laterally around the cones.

Water uptake and distribution in germinating tobacco seeds investigated in vivo by nuclear magnetic resonance imaging.

The regulation of water uptake of germinating tobacco (Nicotiana tabacum) seeds was studied spatially and temporally by in vivo (1)H-nuclear magnetic resonance (NMR) microimaging and (1)H-magic angle spinning NMR spectroscopy. These nondestructive state-of-the-art methods showed that water distribution in the water uptake phases II and III is inhomogeneous. The micropylar seed end is the major entry point of water. The micropylar endosperm and the radicle show the highest hydration. Germination of tobacco follows a distinct pattern of events: rupture of the testa is followed by rupture of the endosperm. Abscisic acid (ABA) specifically inhibits endosperm rupture and phase III water uptake, but does not alter the spatial and temporal pattern of phase I and II water uptake. Testa rupture was associated with an increase in water uptake due to initial embryo elongation, which was not inhibited by ABA. Overexpression of beta-1,3-glucanase in the seed-covering layers of transgenic tobacco seeds did not alter the moisture sorption isotherms or the spatial pattern of water uptake during imbibition, but partially reverted the ABA inhibition of phase III water uptake and of endosperm rupture. In vivo (13)C-magic angle spinning NMR spectroscopy showed that seed oil mobilization is not inhibited by ABA. ABA therefore does not inhibit germination by preventing oil mobilization or by decreasing the water-holding capacity of the micropylar endosperm and the radicle. Our results support the proposal that different seed tissues and organs hydrate at different extents and that the micropylar endosperm region of tobacco acts as a water reservoir for the embryo.

Combined relaxation and displacement experiment: a fast method to acquire T2, diffusion and velocity maps.

A fast method for quantitative imaging of T2 and displacement (flow and diffusion) is presented. The pulse sequence combines multi-PGSE NMR with multi-echo acquisition and compensates for flow effects in the read gradient and diffusion during multi-echo trains. The impact of the gradient pulses in a multi-echo train on the signal phase and amplitude is discussed. It is shown that separate T2 and displacement images with microscopic resolution can be obtained within minutes. The capability for 3D flow imaging is demonstrated. The sequence is then used to investigate forced detachment of a biofilm in a tube.

Measuring local flow velocities and biofilm structure in biofilm systems with magnetic resonance imaging (MRI).

The characterization of substrate transport in the bulk phase and in the biofilm matrix is one of the problems which has to be solved for the verification of biofilm models. Additionally, the surface structure of biofilms has to be described with appropriate parameters. Magnetic resonance imaging (MRI) is one of the promising methods for the investigation of transport phenomena and structure in biofilm systems. The MRI technique allows the noninvasive determination of flow velocities and biofilm structures with a high resolution on the sub-millimeter scale. The presented investigations were carried out for defined heterotrophic biofilms which were cultivated in a tube reactor at a Reynolds number of 2000 and 8000 and a substrate load of 6 and 4 g/m2d glucose. Magnetic resonance imaging provides both structure data of the biofilm surface and flow velocities in the bulk phase and at the bulk/biofilm interface. It is shown that the surface roughness of the biofilms can be determined in one experiment for the complete cross section of the test tubes both under flow and stagnant conditions. Furthermore, the local shear stress was calculated from the measured velocity profiles. In the investigated biofilm systems the local shear stress at the biofilm surface was up to 3 times higher compared to the mean wall shear stress calculated on the base of the mean flow velocity.