[Two cases of airway dysfunction related to diacetyl exposure].

Occupational exposure to diacetyl can lead to bronchiolitis obliterans. In this paper, two patients with severe obstructive ventilation disorder who were exposed to diacetyl at a fragrance and flavours factory were analyzed. The clinical manifestations were cough and shortness of breath. One of them showed Mosaic shadows and uneven perfusion in both lungs on CT, while the other was normal. Field investigation found that 4 of the 8 workers in the factory were found to have obstructive ventilation disorder, and 2 had small airway dysfunction. This paper summarizes the diagnostic process of patients in order to improve the understanding of airway dysfunction caused by occupational exposure to diacetyl and promote the development of relevant standards.

[Analysis of dust hazard characteristics in 59 ferrous metal foundry enterprises in Ningbo City].

Objective: To analyze the post distribution of dust concentration in ferrous metal foundry enterprises and evaluate the occupational health risks, and provide basis for policies of the formulation of pneumoconiosis prevention and control. Methods: From August to September in 2020, the basic information, dust hazard information and occupational health management information of 59 ferrous metal casting enterprises were investigated, the dust concentration distribution was analyzed, and the risk assessment was carried out by using the quantitative assignment model. The dust concentration is tested by LSD method after logarithmic treatment. The 3 times time weighted average allowable exposure concentration of dust is taken as the peak concentration limit of dust; The time weighted average allowable exposure concentration of dust converted by exposure time is taken as the time weighted average exposure concentration limit of dust, and whether the time weighted average exposure concentration and peak concentration of dust at the same post exceed the limit is taken as the basis for exceeding the limit of dust post concentration to calculate the post exceeding the limit rate. Results: The dust hazards were mainly distributed in the posts of sand treatment, molding, sand falling, sand cleaning and cutting and grinding. Dust exposure time weighted average concentration was 0.44 (0.03, 5.11) mg/m(3), peak exposure concentration was 1.30 (0.18, 10.94) mg/m(3), and the over standard rate of Posts was 38.92% (79/203) . Weighted average exposure concentration of other dust (total dust) in the cutting and grinding post is 1.50 (0.15, 7.40) mg/m(3), peak exposure concentration is 0.90 (0.07, 12.48) mg/m(3), and the post exceedance rate is 4.88% (2/41) . Weighted average exposure concentration of silica dust (exhaling dust) in dust operation posts of investment casting enterprises is 0.43 (0.05, 6.35) mg/m(3), peak exposure concentration is 0.90 (0.12, 8.28) mg/m(3), and the post over standard rate is 35.77% (49/137) ; Weighted average exposure concentration of other dust (total dust) at the cutting and grinding post is 2.00 (11.00, 21.00) mg/m(3), and the post exceedance rate is 2.50% (2/80) . There was no significant difference in the concentration of respirable dust between sand casting and investment casting (P>0.05) . The concentration of respirable dust in sand casting was higher than that in sand treatment, molding and sand cleaning posts (P<0.05) . The concentration of silica dust in investment casting was higher than that in sand treatment and molding posts, and that in sand cleaning posts was higher than that in sand treatment posts (P<0.05) . 98.48% (454/461) of the dust operation posts have an occupational health risk value greater than or equal to 400, and 1.52% (7/461) of the dust operation posts have an occupational health risk value of 200~399. Conclusion: there is a high rate of exceeding the standard in the dust work posts in the ferrous metal foundry enterprises in Ningbo, and the workers have a high occupational health risk of pneumoconiosis or metal and its compound pneumoconiosis. Targeted measures should be taken to reduce the occupational health risk.

[Occupational Health Risk Assessment of Low Concentrations Benzene Toluene and Xylenes].

Objective: To Assess occupational health risks of exposuring to low concentrations (lower than occupational exposure limit, OEL) benzene, toluene and Xylenes. Methods: Qualitative evaluation, semi-quantitative evaluation and quantitative evaluation from guidelines for occupational health risk assessment of chemicals in the workplace were conducted to assess occupational health risks exposure to benzene compounds in different workplaces of 5 manufacturing enterprises, respectively. Results: Concentrations of benzene, toluene and Xylenes in all workplaces were lower than OEL. Qualitative evaluation showed that occupational health risk level was 4 exposure to benzene and Xylenes in all workpalces, while 2 exposure to toluene. Semi-quantitative evaluation showed low level (2 of 5) risks in all workplaces exposured to benzene compounds excepted 4 workpalces exposured to benzene, the latter was moderate (3 of 5) . Quantitative evaluation gave unacceptable carcinogenic risk (higher than 10(-4)) of benzene in the wood toy manufactory, and the highest risk was (1.48~5.26) ×10(-4). The occupational health risks of benzene and Xylenes were all unacceptable (HQ>1) in 9 workplaces. Conclusion: There still need more attention to occupational health risks exposure to benzene, toluene and Xylenes lower than OEL.

[Analysis on occupational health surveillance to workers exposed to toxic environment in Ningbo].

Objective: To analyze the occupational health surveillance data of toxic and harmful workers in Ningbo, and provide scientific basis for making protective measures. Methods: To export the occupational health surveillance data of toxic and harmful workers reported by occupational health examination institutions in Ningbo during the January 1, 2011 to December 31, 2017 from the China Information System for Disease Control and Prevention, and analyze the trend of the suspected occupational disease and occupational contraindication detection rate, and compare the the health status of workers in different industry nature, economic type, enterprise scale and occupational hazards. Results: From 2011 to 2017, the number of occupational health surveillance of toxic and harmful workers in Ningbo was increasing year by year. The detection rates of suspected occupational diseases and occupational contraindications generally showed a downward trend (P<0.05) . In 2017, the distribution of occupational health care for toxic and harmful workers in Ningbo was mainly based on manufacturing (187 681/220 895, 84.96%) , private economic enterprises (103 960/220 895, 47.06%) and small enterprises (100 357/220 895, 45.43%) , Workers exposed to chemical poisons had the largest number of physical examinations (101 813/220 895, 46.09%) . The highest detection rates of suspected occupational diseases were mining industry (2/1225, 0.16%) , collective economic enterprises (4/2622, 0.15%) and small enterprises (88/100 357, 0.09%) . The highest detection rates of occupational contraindications were rental and business services (16/1 320, 1.21%) , private economic enterprises (1 190/103 960, 1.14%) and small enterprises (995/100 357, 0.99%) . In addition, workers exposed to dust had the highest detection rate of suspected occupational diseases (57/46 740, 0.12%) and workers exposed to physical factors had the highest detection rate of occupational contraindications (1207/69 567, 1.74%) . There were significant differences between the detection rate of suspected occupational disease and occupational contraindication in different industries, economic types, enterprise scale and occupational hazards (P<0.05) . Conclusion: The occupational health surveillance of toxic and harmful workers in Ningbo has been strengthened year by year, attention should be paid to small, private enterprises, and strengthen the supervision of occupational health and further standardize the work of occupational health examination so as to effectively protect the health of the occupational population.

[Analysis of acute pesticide poisoning in Ningbo city from 2011 to 2016].

Objective: To analyze the characteristics of acute pesticide poisoning in Ningbo, and to provide scientific basis for the prevention and control strategy. Methods: In February 2017, the pesticide poisoning report card of Ningbo from 2011 to 2016 was drawn from the China Disease Control and prevention information system. The data of the report card was organized by Excel and analyzed by SPSS19.0 software. Results: 2593 cases of acute pesticide poisoning were reported in Ningbo from 2011 to 2016, 125 deaths, and the case fatality rate was 4.82%. The productive pesticide poisoning and unproductive pesticide poisoning were 299 and 2294, respectively, the ratio was 1: 7.67. The case fatality rate were 0.33% and 5.41%, respectively. The difference was statistically significant (χ(2)=14.83, P<0.01). The productive Pesticide poisoning mainly occurred from July to September (55.85%) , the unproductive pesticides mainly occurred from April to June (30.64%) and July to September (30.34%). The seasonal distribution of the pesticide poisoning in the two groups was statistically significant (χ2=82.21, P<0.01). The productive pesticide poisoning in male (80.27%) was significantly higher than the proportion of unproductive pesticide poisoning (52.09%) , the differences in gender composition between the two types of pesticide poisoning was significant (χ2=84.97, P<0.01). The productive pesticide poisoning from 55 to 65 years old group was in the largest number (35.45%) , and the distribution of unproductive pesticide poisoning was uniform in each age group including 25 years old and above, the difference in age composition between two types of pesticide poisoning was statistically significant (χ2=177.84, P<0.01). All of the 10 counties of Ningbo had reports of pesticide poisoning. The counties with more reports were Ninghai county (18.28%) , Fenghua district (14.69%) and Yuyao (12.42%). The acute pesticide poisoning was mainly caused by pesticides and herbicides, mainly in organophosphorus (45.74%) and paraquat (16.81%) . Conclusions: At present, the pesticide poisoning in Ningbo is given priority to unproductive pesticide poisoning currently, seasonal distribution characteristics was obvious, and occurred both in different sex and age groups, suggesting that the relevant departments should carry out targeted health education, and strengthen the management of high toxic and highly toxic pesticides.

[The application of two occupation health risk assessment models in a wooden furniture manufacturing industry].

Objective: To explore the applicability of 2 different models of occupational health risk assessment in wooden furniture manufacturing industry. Methods: American EPA inhalation risk model and ICMM model of occupational health risk assessment were conducted to assess occupational health risk in a small wooden furniture enterprises, respectively. Results: There was poor protective measure and equipment of occupational disease in the plant. The concentration of wood dust in the air of two workshops was over occupational exposure limit (OEL) , and the CTWA was 8.9 mg/m3 and 3.6 mg/m3, respectively. According to EPA model, the workers who exposed to benzene in this plant had high risk (9.7×10-6 ~34.3×10-6) of leukemia, and who exposed to formaldehyde had high risk (11.4 × 10-6) of squamous cell carcinoma. There were inconsistent evaluation results using the ICMM tools of standard-based matrix and calculated risk rating. There were very high risks to be attacked by rhinocarcinoma of the workers who exposed to wood dust for the tool of calculated risk rating, while high risk for the tool of standard-based matrix. For the workers who exposed to noise, risk of noise-induced deafness was unacceptable and medium risk using two tools, respectively. Conclusion: Both EPA model and ICMM model can appropriately predict and assessthe occupational health risk in wooden furniture manufactory, ICMM due to the relatively simple operation, easy evaluation parameters, assessment of occupational- disease-inductive factors comprehensively, and more suitable for wooden furniture production enterprise.