High Performance Solar-Driven Power-Water Cogeneration for Practical Application: From Micro/Nano Materials to Beyond.

Solar-driven water-electricity cogeneration is a promising strategy for tackling water scarcity and power shortages. However, comprehensive reviews on performance, scalability, commercialization, and power density are lacking. This Perspective presents an overview of recent developments and insights into the challenges and future outlooks for practical applications in this area. We summarize recent advances in high-efficiency water production, focusing on rapid evaporation and condensation. Then we categorize power-water cogeneration systems by power generation mechanisms like steam, evaporation, salinity gradient, photovoltaics, and temperature gradient, providing a comprehensive summary of the performance and applicability of these systems in different scenarios. Finally, we highlight challenges in current systems, considering nanoscale mechanisms and large-scale manufacturing, while also exploring potential trends for future practical applications.

Simultaneous Salt Rejection and Heat Localization Via Engineering Macrochannels in Morning Glory-Shaped 3D Evaporator.

Solar desalination is a promising solution for alleviating water scarcity due to its low-cost, environmentally friendly, and off-grid capabilities. However, simultaneous salt rejection and heat localization remain challenging, as the rapid salt convection often results in considerable heat loss. Herein, this challenge is overcome via a facile design: i) isolating high-temperature and high-salt zones by rationally designing morning glory-shaped wick structures and ii) bridging high-salt zones and bulk water with low-tortuosity macrochannels across low-temperature surfaces. The salinity gradient in the macrochannels passively triggers convective flow, facilitating the rapid transfer of salt ions from the high-salt zone to the bulk water. Meanwhile, the macrochannels are spatially isolated from the high-temperature zone, preventing heat loss during salt convection and thereby achieving a high evaporation rate (≈3 kg m-2 h-1) and superior salt rejection even in highly concentrated real seawater. This work provides new insights into salt rejection strategies and advances practical applications for sustainable seawater desalination.

Identification of Attractants from Three Host Plants and How to Improve Attractiveness of Plant Volatiles for Monochamus saltuarius.

As a new vector insect of pine wood nematodes in China, the Monochamus saltuarius (Coleoptera: Cerambycidae) vectors pine wilt nematodes into healthy pine trees through feeding and oviposition, resulting in huge economic losses to forestry. A promising control strategy is to develop safe and efficient attractants. This study aims to screen for the key active volatiles of Pinus koraiensis (Pinales: Pinaceae), Pinus tabuliformis (Pinales: Pinaceae), and Picea asperata (Pinales: Pinaceae) that can attract M. saltuarius, and to study the synergistic attraction of the main attractant plant volatiles with ethanol and insect aggregation pheromones. The preference of M. saltuarius for three hosts is P. koraiensis > P. tabuliformis > Picea asperata. We detected 18 organic volatiles from three host plants. Through EAG assays and indoor Y-tube behavioral experiments, 3-carene, (-)-camphor, ß-pinene, α-phellandrene, terpinolene, α-pinene, D-limonene, and myrcene were screened to have attractive effects on M. saltuarius. We found that 3-carene, ß-pinene, and α-pinene are the most attractive kairomones in field experiments, which may play a crucial role in the host localization of M. saltuarius. Ethanol has a synergistic effect on the attractant activity of 3-carene and ß-pinene, and the synergistic effect on ß-pinene is the best. The mixture of ethanol, 2-undecyloxy-1-ethanol, and ipsdienol can significantly enhance the attraction effect of ß-pinene on M. saltuarius. These new findings provide a theoretical basis for the development of attractants for adult M. saltuarius and contribute to the green control of M. saltuarius.

Diamond with Sp2-Sp3 composite phase for thermometry at Millikelvin temperatures.

Temperature is one of the seven fundamental physical quantities. The ability to measure temperatures approaching absolute zero has driven numerous advances in low-temperature physics and quantum physics. Currently, millikelvin temperatures and below are measured through the characterization of a certain thermal state of the system as there is no traditional thermometer capable of measuring temperatures at such low levels. In this study, we develop a kind of diamond with sp2-sp3 composite phase to tackle this problem. The synthesized composite phase diamond (CPD) exhibits a negative temperature coefficient, providing an excellent fit across a broad temperature range, and reaching a temperature measurement limit of 1 mK. Additionally, the CPD demonstrates low magnetic field sensitivity and excellent thermal stability, and can be fabricated into probes down to 1 micron in diameter, making it a promising candidate for the manufacture of next-generation cryogenic temperature sensors. This development is significant for the low-temperature physics researches, and can help facilitate the transition of quantum computing, quantum simulation, and other related technologies from research to practical applications.

3D-Printed Mullite-Reinforced SiC-Based Aerogel Composites.

There is a growing demand for thermal management materials in electronic fields. Aerogels have attracted interest due to their extremely low density and extraordinary thermal insulation properties. However, the application of aerogels is limited by high production costs and the requirement that aerogel structures not be load-bearing. In this study, mullite-reinforced SiC-based aerogel composite (MR-SiC AC) is prepared through 3D printing combined with in situ growth of SiC nanowires in post processing. The fabricated MR-SiC AC not only has ultra-low thermal conductivity (0.021 W K m-1) and high porosity (90.0%), but also a high Young's modulus (24.4 MPa) and high compressive strength (1.65 MPa), both exceeding the measurements of existing resilient aerogels by an order of magnitude. These properties make MR-SiC AC an ideal solution for the precision thermal management of lightweight structures having complex geometry for functional devices.

Coupling High Hardness and Zn Affinity in Amorphous-Crystalline Diamond for Stable Zn Metal Anodes.

The highly reversible plating/stripping of Zn is plagued by dendrite growth and side reactions on metallic Zn anodes, retarding the commercial application of aqueous Zn-ion batteries. Herein, a distinctive nano dual-phase diamond (NDPD) comprised of an amorphous-crystalline heterostructure is developed to regulate Zn deposition and mechanically block dendrite growth. The rich amorphous-crystalline heterointerfaces in the NDPD endow modified Zn anodes with enhanced Zn affinity and result in homogeneous nucleation. In addition, the unparalleled hardness of the NDPD effectively overcomes the high growth stress of dendrites and mechanically impedes their proliferation. Moreover, the hydrophobic surfaces of the NDPD facilitate the desolvation of hydrate Zn2+ and prevent water-mediated side reactions. Consequently, the Zn@NDPD presents an ultrastable lifespan exceeding 3200 h at 5 mA cm-2 and 1 mAh cm-2. The practical application potential of Zn@NDPD is further demonstrated in full cells. This work exhibits the great significance of a chemical-mechanical synergistic anode modification strategy in constructing high-performance aqueous Zn-ion batteries.

Hydrogel-Reactive-Microenvironment Powering Reconfiguration of Polymer Architectures.

Reconfiguration of architected structures has great significance for achieving new topologies and functions of engineering materials. Existing reconfigurable strategies have been reported, including approaches based on heat, mechanical instability, swelling, origami/kirigami designs, and electromagnetic actuation. However, these approaches mainly involve physical interactions between the host materials and the relevant stimuli. Herein, a novel, easy-manipulated, and controllable reconfiguration strategy for polymer architectures is proposed by using a chemical reaction of host material within a hydrogel reactive microenvironment. 3D printed polycaprolactone (PCL) lattices transformed in an aqueous polyacrylamide (PAAm) hydrogel precursor solution, in which ultraviolet (UV) light triggered heterogeneous grafting polymerization between PCL and AAm. In situ microscopy shows that PCL beams go through volumetric expansion and cooperative buckling, resulting in transformation of PCL lattices into sinusoidal patterns. The transformation process can be tuned easily and patterned through the adjustment of the PCL beam diameter, unit cell width, and UV light on-off state. Controlling domain formation is achieved by using UV masks. This framework enables the design, fabrication, and programming of architected materials and inspires the development of novel 4D printing approaches.

Frequency-encoded eye tracking smart contact lens for human-machine interaction.

Eye tracking techniques enable high-efficient, natural, and effortless human-machine interaction by detecting users' eye movements and decoding their attention and intentions. Here, a miniature, imperceptible, and biocompatible smart contact lens is proposed for in situ eye tracking and wireless eye-machine interaction. Employing the frequency encoding strategy, the chip-free and battery-free lens successes in detecting eye movement and closure. Using a time-sequential eye tracking algorithm, the lens has a great angular accuracy of <0.5°, which is even less than the vision range of central fovea. Multiple eye-machine interaction applications, such as eye-drawing, Gluttonous Snake game, web interaction, pan-tilt-zoom camera control, and robot vehicle control, are demonstrated on the eye movement model and in vivo rabbit. Furthermore, comprehensive biocompatibility tests are implemented, demonstrating low cytotoxicity and low eye irritation. Thus, the contact lens is expected to enrich approaches of eye tracking techniques and promote the development of human-machine interaction technology.

Multimaterial 3D and 4D Bioprinting of Heterogenous Constructs for Tissue Engineering.

Additive manufacturing (AM), which is based on the principle of layer-by-layer shaping and stacking of discrete materials, has shown significant benefits in the fabrication of complicated implants for tissue engineering (TE). However, many native tissues exhibit anisotropic heterogenous constructs with diverse components and functions. Consequently, the replication of complicated biomimetic constructs using conventional AM processes based on a single material is challenging. Multimaterial 3D and 4D bioprinting (with time as the fourth dimension) has emerged as a promising solution for constructing multifunctional implants with heterogenous constructs that can mimic the host microenvironment better than single-material alternatives. Notably, 4D-printed multimaterial implants with biomimetic heterogenous architectures can provide a time-dependent programmable dynamic microenvironment that can promote cell activity and tissue regeneration in response to external stimuli. This paper first presents the typical design strategies of biomimetic heterogenous constructs in TE applications. Subsequently, the latest processes in the multimaterial 3D and 4D bioprinting of heterogenous tissue constructs are discussed, along with their advantages and challenges. In particular, the potential of multimaterial 4D bioprinting of smart multifunctional tissue constructs is highlighted. Furthermore, this review provides insights into how multimaterial 3D and 4D bioprinting can facilitate the realization of next-generation TE applications.

Two-dimensional mineral hydrogel-derived single atoms-anchored heterostructures for ultrastable hydrogen evolution.

Hydrogen energy is critical for achieving carbon neutrality. Heterostructured materials with single metal-atom dispersion are desirable for hydrogen production. However, it remains a great challenge to achieve large-scale fabrication of single atom-anchored heterostructured catalysts with high stability, low cost, and convenience. Here, we report single iron (Fe) atom-dispersed heterostructured Mo-based nanosheets developed from a mineral hydrogel. These rationally designed nanosheets exhibit excellent hydrogen evolution reaction (HER) activity and reliability in alkaline condition, manifesting an overpotential of 38.5 mV at 10 mA cm-2, and superior stability without performance deterioration over 600 h at current density up to 200 mA cm-2, superior to most previously reported non-noble-metal electrocatalysts. The experimental and density functional theory results reveal that the O-coordinated single Fe atom-dispersed heterostructures greatly facilitated H2O adsorption and enabled effective adsorbed hydrogen (H*) adsorption/desorption. The green, scalable production of single-atom-dispersed heterostructured HER electrocatalysts reported here is of great significance in promoting their large-scale implementation.

Soft, Bistable Actuators for Reconfigurable 3D Electronics.

Existing strategies for reconfigurable three-dimensional (3D) electronics are greatly constrained by either the complicated driven mechanisms or harsh demands for conductive materials. Developing a simple and robust strategy for 3D electronics reconstruction and function extension remains a challenge. Here, we propose a solvent-driven bistable actuator, which acts as a substrate to reconstruct the combined 3D electronic device. Extraction of silicon oil from a hybrid poly(dimethylsiloxane) (PDMS) circle sheet buckles the dish to a bistable structure. The ultraviolet (UV)/ozone treatment on one surface of the PDMS structure introduces an oxidized layer, yielding a bilayered, solvent-driven bistable smart actuator. The snap-back stimulus to the oxidized layer differs from the snap-through stimulus. Experimental and numerical studies reveal the fundamental regulations for buckling configurations and the bistable behavior of the actuator. The prepared bistable actuator drives the bonded kirigami polyimide (PI) sheets to diverse 3D structures from the original bending configuration, reversibly. A frequency-reconfigurable electrically small monopole antenna is presented as a demonstration, which paves a way for the applications of this actuator in the field of reconfigurable 3D electronics.