ABSTRACT
AIM: To evaluate the influence of different preparation tapers on the reduction in planktonic bacteria and biofilms of Enterococcus faecalis and Candida albicans in the apical third (4 mm) of the mesial roots of mandibular molars, correlating decontamination with canal shape. METHODOLOGY: After microtomography analysis for morphological standardization of the canals, 48 mandibular molar roots, each containing two canals (96 canals), were contaminated with E. faecalis and C. albicans and divided into four groups (n = 11) for canal instrumentation using ProDesign Logic 2 files with different tapers G (.03): # 25.03; G (.04): # 25.04; G (.05): # 25.05; and G (.06): # 25.06 and irrigation with 2.5% sodium hypochlorite. Four roots were examined under a scanning electron microscope (SEM) to qualitatively assess biofilm formation. Eight roots were used as the negative control group (samples were not contaminated). Bacteriological samples were taken exclusively from the apical third of the roots before and after chemical-mechanical preparation and bacterial counts were determined (CFU/mL). The final micro-CT scan was used to quantify the volume variation and unprepared canal area in the apical third. Statistical analysis was performed using the Kruskal-Wallis, Student-Newman-Keuls and Wilcoxon tests for analysis of microbiological data. anova and the Tukey or Games-Howell test were used for analysis of micro-CT data and Spearman's test for correlations (α = 5%). RESULTS: All groups showed a significant reduction in bacteria (p < .05), with no statistically significant difference between groups. There was no significant difference in per cent volume increase between groups. The unprepared area (Δ%) was affected by the file used (p = .026) and was significantly lower for G (.06) compared to G (.03). There was no statistically significant correlation among bacterial reduction, volume and unprepared area (p > .05). CONCLUSION: The different preparation tapers influenced root canal shaping in the apical third but did not improve decontamination in this region.
Subject(s)
Biofilms , Candida albicans , Dental Pulp Cavity , Enterococcus faecalis , Root Canal Preparation , X-Ray Microtomography , X-Ray Microtomography/methods , Humans , Root Canal Preparation/instrumentation , Root Canal Preparation/methods , Candida albicans/isolation & purification , Candida albicans/physiology , Dental Pulp Cavity/microbiology , Dental Pulp Cavity/diagnostic imaging , Sodium Hypochlorite/therapeutic use , Sodium Hypochlorite/pharmacology , Microscopy, Electron, Scanning , Molar/microbiology , Plankton , Root Canal Irrigants/administration & dosage , Root Canal Irrigants/therapeutic use , In Vitro Techniques , Tooth Apex/microbiology , Tooth Apex/diagnostic imagingABSTRACT
The objective of the study was to investigate the 5.25% sodium hypochlorite (NaOCl) penetration into the dentinal tubules after different irrigation methods. Seventy canines were stained with 1% crystal violet and divided into groups (n = 20): GEC-EasyClean; GPUI-E1 Irrisonic ultrasonic insert; GXP-XP-Endo finisher; GPC-conventional irrigation and GNC-stained tooth without irrigation. Axial sections (16×) were assessed and irrigant penetration was quantified as a bleaching halo on the surface of the apical, middle and coronal third. In the apical third, GPUI promoted greater NaOCl penetration (p < 0.05). GXP was better than GEC (p < 0.05), as was GPC (p > 0.05). The GPUI and GXP groups were similar in the middle and coronal third (p > 0.05). GPUI and GXP showed better results than GEC (p < 0.05). GPUI was more effective in the apical third and like GXP in the cervical and middle third.
Subject(s)
Dentin , Root Canal Irrigants , Therapeutic Irrigation/methods , Sodium Hypochlorite , Ultrasonics/methodsABSTRACT
OBJECTIVES: The study aimed to compare the efficacy of XP-endo Finisher and Passive Ultrasonic Irrigation (PUI) in removing hard tissue debris from curved canals. MATERIALS AND METHODS: Thirty-four mandibular molars with Vertucci's type II mesial canals were scanned in microcomputed tomography before and after preparation with HyFlex EDM, and accumulated hard tissue debris was quantified. Subsequently, the teeth were randomly divided into two groups according to the supplementary procedure: PUI with the Ultra-X insert or XP-endo Finisher. After the intervention, the specimens underwent another scanning. Two separate analyses were conducted, one for the total canal and another for the isthmus area. Unpaired and paired T-tests were used for inter- and intergroup comparisons, with a significance level set at 5%. RESULTS: Both supplementary methods reduced the amount of debris compared to the initial volume. Remarkably, the XP-endo Finisher achieved a significantly higher percentage of debris removal (71% for the total canal and 74% for the isthmus areas) compared to PUI (41% for the total canal and 52% for the isthmus area) (P < 0.05). CONCLUSIONS: Both supplementary approaches reduced the amount of hard tissue debris from canal preparation, still XP-endo Finisher showed a higher reduction compared to PUI (p < 0.05). CLINICAL RELEVANCE: None of the supplementary methods rendered canals completely free of hard tissue debris. However, the supplementary approach with XP-endo Finisher resulted in lower levels of hard tissue debris than PUI in curved canals with isthmuses.
Subject(s)
Dental Pulp Cavity , Ultrasonics , X-Ray Microtomography , Dental Pulp Cavity/diagnostic imaging , Root Canal Preparation/methods , Molar , Therapeutic Irrigation/methods , Root Canal Irrigants/therapeutic useABSTRACT
BACKGROUND: Eccentric instruments have been proposed as more effective and less time-consuming for endodontic instrumentation. AIM: To compare biomechanical outcomes of different instrumentation systems and time undertaken for instrumentation in resin prototypes. DESIGN: Sixty standardized prototypes of mandibular second primary molars were instrumented according to the following systems: K-files, ProTaper Next (PTN), XP-endo Shaper (XPS), XP-endo Finisher (XPF), XP-Clean (XPC), and Sequence Baby File (SBF; n = 10/each). Irrigation was performed with saline with simultaneous aspiration, and time spent was recorded. The prototypes were micro-CT-scanned before and after the instrumentation, and image sets were reconstructed and registered. Non-instrumented areas, accumulated debris, removed root material volume, and canal transportation were quantified. Data were analyzed through ANOVA, the Kruskal-Wallis test, and the Wilcoxon signed-rank test (α = 5%). RESULTS: K-files and SBF resulted in more instrumentation time (p < .05). SBF, XPC and PTN removed less root dentine (p < .05), but PTN left more untouched areas (p < .05). Accumulated debris were lower for XPC and SBF (p < .05). Canal transportation was similar among the groups. CONCLUSION: Rotary systems reduced instrumentation time, whereas SBF and XPC resulted in more conservative instrumentation, with less debris accumulation and non-instrumented areas. A dedicated paediatric endodontic system (SBF) outperformed eccentric instruments in terms of effectiveness.
ABSTRACT
OBJECTIVE: This study compared the shaping ability of TRUShape and XP-endo Shaper systems on C-shaped root canals replicas using microcomputed tomography (micro-CT). MATERIAL AND METHODS: Thirty three-dimensional replicas based on a mandibular second molar classified as C1 type I C-shaped canal were randomly divided into two groups (n = 15): TRUShape (G.TRU) and XP-endo Shaper (G.XP) and instrumented with each system according to the manufacturer's instructions. Changes in volume and surface and the unprepared area of the root canal were measured by scanning on micro-CT before and after instrumentation. RESULTS: The unprepared areas were 39% in the G.TRU and 43% in the G.XP group with no significant difference between them (p > 0.05), but both the tested systems left a high percentage of unprepared root canal walls of C-shaped root canals. CONCLUSION: TRUShape and XP-endo Shaper showed a high rate of unprepared areas with similar results after C-shaped root canals replicas for root canal preparation.
ABSTRACT
OBJECTIVE: The aim of this study was to analyze the internal morphology of deciduous molars through the use of computed microtomography in a sample from Rio de Janeiro. MATERIAL AND METHODS: Thirty maxillary and 30 mandibular deciduous molars (n = 60), divided in first and second primary molars, were scanned by computed microtomography. The teeth were evaluated for root number, root canals, Vertucci classification, root curvature, presence of lateral canals, furcation dentin thickness, structure model index (SMI), volume, and canal surface area. RESULTS: The results showed 100% of maxillary molars had three roots and Vertucci type I canal was more prevalent in this group. In the mandibular ones, type IV was more frequent in the mesial root and class I in the distal root and the cavo-interradicular canal occurred in 2 specimens. Dentin thickness in the furcation region measured 1.53 and 1.59 mm in the maxillary and mandibular, respectively. Volume and area parameters varied according to the evaluated canals and SMI demonstrated that all canals had a cylindrical shape. CONCLUSION: More detailed information about the internal anatomy of the primary molars has been described, which may help strategies in the preparation of these root canals.
ABSTRACT
OBJECTIVE: This study compared the shaping ability of the Hyflex CM and XP-endo Shaper rotary file systems in curved mesial canals of mandibular molars using micro-computed tomography. MATERIAL AND METHODS: Seventeen mesial roots of extracted first mandibular molars with two independent mesial canals were scanned before and after root canal preparation with the tested rotatory file systems. Each mesial canal from the same specimen was prepared with one of the two systems. The parameters analyzed were canal centering (transportation) for the cervical, middle, and apical segments, as well as for the entire canal (0-10 mm from the apex); and canal volume increase, canal surface area increase, and unprepared canal walls for two segments, 0 to 4 mm and 0 to 10 mm from the apex. RESULTS: There was no significant difference between both systems regarding canal centering (transportation), volume increase, and unprepared canal walls for the 0 to 10 mm segment (p> 0.05); however, a significant difference was observed for the 0 to 4 mm segment (p <0.01), where the Hyflex CM left 28.46% of unprepared walls and XP-endo Shaper left 13.26%. CONCLUSIONS: The shaping ability of the two tested rotatory file systems in mesial roots of first mandibular molars was similar for all parameters in all the segments evaluated, except for the 0 to 4 mm segment, where XP-endo Shaper left a smaller area of unprepared canal walls than Hyflex CM.
ABSTRACT
OBJECTIVE: Airborne particles are one of the most important factors in the spread of infectious pathogens and must be monitored in healthcare facilities. Viable particles are living microorganisms, whereas non-viable particles do not contain microorganisms but act as transport for viable particles. The effectiveness of ozone in reducing these particles in a non-controlled room and a controlled cleanroom using high-efficiency particles air (HEPA) filter was analyzed in this study. MATERIALS AND METHODS: Viable particles and non-viable particles sized 0.5 and 5 µm were quantified before and after ozonation in two different health environments: non-controlled (group 1) and controlled area, which was associated with a HEPA filtering system (group 2). Active air sampling using a MAS 100 was used to count the number of viable particles, while the number of non-viable particles/m3 was obtained following the manufacturer's recommendations of the Lasair III 310C system. RESULTS: Our results of the viable particles counting were not quantifiable and analyzed using statistical tests. Both groups showed a slight tendency to reduce the number of viable particles after ozonation of the environmental air. A statistically significant reduction of non-viable 5 µm particles after ozonation was observed in both groups (G1: p = 0,009; G2: p = 0,002). Reduction in the non-viable 0.5 µm particles after ozonation was observed only in group 2, associated with the HEPA filter. In group 1, after ozonation, a significant increase in 0.5 µm particles was observed, probably due to the breaking of 5 µm particles by ozone gas. Our results suggest that ozone gas can break 5 µm particles and, when associated with a HEPA filter, increases its effectiveness in removing 0.5 µm particles. CONCLUSION: Considering that 5 µm particles are important in the air transport of microorganisms, their reduction in the environment can be a relevant parameter in controlling the dissemination of infections.
ABSTRACT
OBJECTIVE: This study compared the ProTaper Next (PTN; Dentsply Sirona, Tulsa, Oklahoma, United States) and HyFlex EDM (HEDM; Coltene/Whaledent AG, Alstätten, Switzerland) systems using micro-computed tomography (CT). MATERIALS AND METHODS: Twenty-one mesial roots classified as Vertucci's type IV from extracted mandibular first molars with curvatures between 20 and 40 degrees were selected. The teeth were scanned using a micro-CT before and after root canal preparation by both systems, applied to the same root, in alternating canals. The following parameters were analyzed: canal centering, apical transportation, root canal diameter/root diameter. RESULTS: No statistically significant differences between both systems were observed for any of the assessed morphological parameters (p > 0.05). All canals presented diameter enlargement of more than 40% in relation to root diameter in the cervical and middle segments. No statistically significant difference was noted between the HEDM and PTN groups. The wear percentage for the HEDM group in the cervical and middle thirds were 49.66 ± 8.65 and 46.48 ± 14.29, respectively, and 51.02 ± 11.81 and 45.48 ± 10.79 for the PTN group, respectively. CONCLUSION: Both systems displayed similar mandibular molar mesial canals preparation, with no differences noted for any of the assessed parameters. Both groups showed increased canal diameter in the cervical and middle thirds by more than 40%.
ABSTRACT
AIM: To evaluate the influence of the design of endodontic access cavities on the percentage of unprepared areas of canal walls and flexural fatigue of instruments activated by reciprocating movement in oval-shaped straight root canals of extracted teeth. METHODOLOGY: Forty-two mandibular incisors with oval canals were scanned by a microcomputed tomography (micro-CT) device for homogeneous selection and distribution of the samples. Then, the teeth were divided into two groups (n = 21) according to the design of access cavity being tested: ultraconservative endodontic access cavity (UltraAC) and traditional access cavity. The canals were accessed with the aid of a surgical microscope, instrumented with the WaveOne Gold Medium system and irrigated with 2.5% NaOCl and 17% EDTA. The unprepared areas of the canal wall were analysed by overlaying images before and after instrumentation and expressed as percentages. micro-CT data were analysed using t-test, Mann-Whitney and Wilcoxon tests. The endodontic instruments used during instrumentation were subjected to static flexural fatigue testing using an artificial stainless steel canal with a 60° angle of curvature and a radius of 5 mm, located 5 mm from the tip of the instrument. The instruments were activated until fracture occurred, and the time in seconds for the fracture was recorded using a digital timer. The number of cycles to fracture was calculated and analysed statistically. For flexural fatigue data, an anova test complemented by a Tukey range test was used. The significance level of 5% was used for all analyses. RESULTS: There was no significant difference between the groups related to unprepared areas by the instrument during canal preparation (p > .05). The difference in flexural fatigue resistance between the groups was not significant. CONCLUSION: The use of UltraAC did not interfere with the canal instrumentation of extracted mandibular incisors with straight and oval canals. There was no difference in the flexural fatigue resistance of the instruments in relation to access cavity design.
Subject(s)
Dental Pulp Cavity , Root Canal Preparation , Dental Pulp Cavity/diagnostic imaging , Incisor/diagnostic imaging , Stainless Steel , X-Ray MicrotomographyABSTRACT
OBJECTIVE: The aim of present study was to assess the cytotoxicity and antimicrobial efficacy of 2% peracetic acid (PAA) compared with 5.25% sodium hypochlorite (NaOCl) and 2% chlorhexidine (CHX). MATERIAL AND METHODS: For the cytotoxicity test, 100 µl of the tested solutions were added in 12 wells with ECV 304 endothelial cells in each group: NaOCl, CHX, and PAA, in addition to the control group. Each solution was evaluated after 24 hours of contact in four dilutions: 0.2, 0.1, 0.05 and 0.025 through mitochondrial function using MTT colorimetric assay. In the antimicrobial evaluation, 40 dentin blocks 5 mm in length and 0.2 g in weight were incubated with 400 µl of Enterococcus faecalis suspension for 21 days at 37°C. The contaminated samples were divided into three experimental groups within 5 minutes of contact: NaOCl group, CHX group, PAA group, as well as the positive control group. The specimens received treatment and were transferred to a tube with saline for serial dilution of the solution and seeding for isolation and colony forming unit (CFU) count. STATISTICAL ANALYSIS: The results obtained were expressed as mean (A570 nm) ± standard deviation (SD) and in a multiple linear regression model and multiple comparisons conducted. RESULTS: The antimicrobial evaluation revealed that the NaOCl and CHX groups showed a statistically significant difference compared with the control group (p < 0.001), while the PAA reduced only the CFU growth. It can be concluded that, among the agents tested, PAA expressed greater cell viability, followed by CHX and NaOCl. However, it did not show greater antimicrobial activity in vitro in the mature biofilm of Enterococcus faecalis.
ABSTRACT
The objective was to evaluate the shaping ability of XP-endo Shaper and Mtwo systems in oval-shaped canals preparation by microcomputed tomography (micro-CT) along the entire canal. The volume, surface area and percentage of unprepared area were evaluated by image processing in entire canal and apical third (5 mm). Apical transportation and centring ability were evaluated at 3, 5 and 7 mm from the apex. Forty single-canal oval canines were paired in two groups (n = 20) according to the instrumentation system: XP-endo Shaper and Mtwo. The teeth were scanned by micro-CT before and after instrumentation, using a thermal vat at 37°C. The XP-endo Shaper system was more effective in the instrumentation of oval-shaped canals when compared to Mtwo system, resulting in greater volume increases and lower percentage of unprepared canals walls in apical region. Regarding apical transportation and centring ability, no statistical difference was observed.
Subject(s)
Dental Pulp Cavity , Root Canal Preparation , Dental Pulp Cavity/diagnostic imaging , Molar , X-Ray MicrotomographyABSTRACT
OBJECTIVE: This study aimed to evaluate the influence of chelating agents (EDTA, citric acid and Tetraclean) on glass fiber posts adhesion to root dentin. MATERIALS AND METHODS: Forty mandibular premolars single canals, with complete apical root, straight, circular cross sections were selected, accessed and had the cervical third prepared with Gates-Glidden drills, then included in resin, instrumented with ProTaper Universal and the root canal obturation was carried out. After, the samples were randomly divided into 4 groups (n = 10) to test the final irrigation solutions: G1:17% EDTA; G2:10% citric acid; G3: Tetraclean and G4: saline solution (control). After 30 days of storage (36.5° C and 100% humidity), the post preparation was performed leaving 4 mm of apical endodontic filling. Then, a fiber-glass post previously selected was coated with ED Primer adhesive system and resin sealer Panavia, installed and stored for 24 hours at 37°C. The samples were subjected to a tensile test with a constant speed of 1 mm/min with 2000 Kgf. The results were analyzed with the ANOVA test. RESULTS: The statistical analyzes indicated no significant differences between the groups (p > 0.05). CONCLUSION: The type of chelating agent used in the final irrigation of the endodontic treatment did not influence the tensile strength of the fixation system used to sealer the glass fiber posts to the intracanal dentin.
ABSTRACT
BACKGROUND: Efficient endodontic instrumentation of primary teeth is a challenge for paediatric dentists. AIM: To evaluate biomechanical outcomes of endodontic instrumentation with a reciprocating system in a polymer-prototyped primary maxillary central incisor. DESIGN: The specimen was systematically instrumented and micro-CT scanned before and after each file. The amount of debris, percentage of non-instrumented areas, removed dentin volume, and lower dentin thickness at specific points along the root canal were analyzed. RESULTS: A 10% increase in removed dentin volume was observed when R40 was compared to R25 (14.5% vs 4.2%). When comparing R50 with R40, this increase was only 3.4% (17.9% vs 14.5%). In the root cervical third, there was substantial reduction in dentin thickness with R50 (48.8%), followed by R40 (39.5%) and R25 (18.6%). There was no difference between R25 and R40 in the removal of dentin at the apical third (15.8%), while R50 resulted in 39.8% reduction in dentin thickness. Percentage of non-instrumented areas were the same for all files. Accumulated debris with R40 and R50 was the same (0.19 mm³) while for R25 was 0.11 mm³. CONCLUSIONS: The Reciproc® system was effective for instrumentation of a prototyped primary maxillary central incisor. The most suitable file for apical preparation was R40.
Subject(s)
Incisor/surgery , Tooth, Deciduous/surgery , Dental Instruments , Dentin , Humans , Maxilla , Treatment OutcomeABSTRACT
CONTEXT: The lack of thorough knowledge regarding morphological and anatomical variations of the root canal system can result in failure to identify all root canals and lead to inadequate instrumentation and consequent failure of the endodontic treatment. AIMS: The aim of the study was to evaluate the anatomy of single-rooted mandibular canines using micro-computed tomography (micro-CT). SUBJECTS AND METHODS: Eighty mandibular canines were scanned by micro-CT to determine anatomic parameters: Vertucci's classification, number of lateral canals, roundness, and minor and major diameters. The shape of root canal orifices, volume, surface area, and convexity structure model index (SMI) were also evaluated. ANALYSIS USED: The CTAn and CTvol software were used to three-dimensional and morphometric analysis. RESULTS: All canals were classified as Vertucci Type I. Lateral canals were verified in 42.4% of the roots, in apical third. The canal diameters were decreased near the apex. The cross sections at the cementoenamel junction and 1 mm from the apex were oval in 38.3% and 79.4% of the canals, respectively. The mean canal volumes and surface areas were 11.48 ± 4.41 mm3≥ and 67.29 ± 19.18 mm2, respectively. The SMI values indicated that mandibular canine was approximately rod like. CONCLUSIONS: The morphology of the root canal of single-rooted canines varied widely at different root levels.
ABSTRACT
Introdução: a ação mecânica dos instrumentos no sistema de canais limita-se ao canal principal, o que valoriza a necessidade de um irrigante com propriedades ótimas para melhorar a limpeza e desinfecção. Objetivos: revisar os diferentes protocolos de irrigação final adotados em Endodontia. Métodos: foram selecionados estudos in vitro e in vivo, para apontar as soluções químicas empregadas, suas possíveis associações e os métodos de agitação. Resultados: ficou evidente a necessidade de mais de uma substância durante a preparação e, também, a associação com um agente quelante, sob agitação, como forma de potenciar a desinfecção dos canais. Conclusão: observou-se que o uso de NaOCl 2,5% associado a EDTA 17%, MTAD ou CHX 2%, sob agitação, parece ser a combinação considerada mais efetiva na literatura, podendo, portanto, ser indicada como irrigantes finais em Endodontia. (AU)
Subject(s)
Root Canal Irrigants , Root Canal Obturation , Root Canal Therapy , Endodontics/instrumentation , Root Canal Irrigants/administration & dosage , Sodium Hypochlorite/administration & dosage , Chelating Agents/administration & dosage , Chlorhexidine/analogs & derivativesABSTRACT
Chemomechanical preparation is intended to clean, disinfect, and shape the root canal. This step is of utmost importance during treatment of infected teeth with apical periodontitis, because treatment outcome depends on how effectively the clinician eliminates bacteria, their products, and necrotic tissue that would serve as substrate for bacterial regrowth. Nonetheless, curvatures and complex internal anatomical variations of the root canal system can pose a high degree of difficulty in reaching these goals. In infected teeth, bacteria may persist not only in difficult-to-reach areas such as isthmuses, ramifications, dentinal tubules, and recesses from C-shaped or oval/flattened canals, but also in areas of the main canal wall that remain untouched by instruments. If bacteria withstand chemomechanical procedures, there is an augmented risk for post-treatment apical periodontitis. This article discloses the reasons why some areas remain unprepared by instruments and discusses strategies to circumvent this issue and enhance infection control during endodontic treatment/retreatment of teeth with apical periodontitis.
Subject(s)
Dental Pulp Cavity/microbiology , Root Canal Preparation/methods , Dental Instruments , Dental Pulp Cavity/anatomy & histology , Dental Pulp Cavity/diagnostic imaging , Humans , Periapical Periodontitis/therapy , Root Canal Irrigants/therapeutic use , Root Canal Preparation/instrumentation , Treatment Outcome , X-Ray Microtomography/methodsABSTRACT
AIM: The aim of this study was the assessment of the anatomical thickness of danger zone in the cervical third of mesial canals of mandibular molars. MATERIALS AND METHODS: Fifty mandibular molars were selected and scanned with cone-beam computed tomography. Data were compared using a length tool provided by scanner software. The measured areas were the mesial and distal walls of the cervical third of the mesial roots, which correspond to the safety and danger zones, respectively. In addition, dentin thickness at the furcation was evaluated. RESULTS: Dentin thicknesses of the safety zone were higher than in the danger zone in all teeth examined. The thinnest dentin of the safety zone was found at a point located 4 mm below the canal orifice, with a mean value of 1.03 mm; conversely, in the danger zone, the thinnest point was located 3 mm below the orifice, with a mean value of 0.81 mm. As for the distance from the pulp chamber floor to the furcation, the average value was 2.23 mm. CONCLUSION: These results show that mean thicknesses at the danger zone of mandibular molar mesial roots were <1.0 mm. These data reinforce the importance of understanding anatomy and the need for conservative preparations when assessing and instrumenting these root canals.
ABSTRACT
ABSTRACT Barodontalgia is not a pathology but a symptom of a subclinical oral problem that, although rare, may affect patients subjected to atmospheric pressure changes and have an influence on flights. This paper aims to discuss the clinical characteristics of pathologies related to the etiology of barodontalgia, as well as differential diagnoses, treatments, and prevention. This paper reports a case of a Brazilian air force officer who went to the Santos Dumont Air Force Dental Clinic reporting pain in the anterior maxillary during a flight. An endodontic treatment followed by periradicular surgery was performed, in order to quickly seal the bone lesion and to avoid new cases of barodontalgia. This work demonstrated a successful approach of a periradicular lesion solved by surgical treatment in order to avoid new cases of barodontalgia during flights. In addition, this paper highlights the importance of deepening knowledge on this event and the need for periodic oral and dental assessment, as well as conclusive treatment in aircrew members in order to prevent aircraft accidents.
ABSTRACT La barodontalgia no es una patología en sí misma, sino un síntoma de un problema oral subclínico que, si bien es poco frecuente, puede afectar a pacientes sometidos a cambios en la presión atmosférica y afectar la seguridad de los vuelos. Este artículo pretende analizar las características clínicas de las patologías relacionadas con la etiología de la barodontalgia, así como los diagnósticos diferenciales, los tratamientos y la prevención. Se presenta el caso de un agente de la fuerza aérea brasileña que acudió a la Clínica Dental de la Fuerza Aérea Santos-Dumont reportando dolor en el maxilar anterior durante un vuelo. Se realizó un tratamiento de endodoncia seguido de cirugía perirradicular, con el fin de sellar rápidamente la lesión del hueso y evitar nuevos casos de barodontalgia. Este trabajo describe un procedimiento acertado para una lesión perirradicular resuelta por tratamiento quirúrgico para evitar nuevos casos de barodontalgia durante los vuelos. Además, destaca la importancia de profundizar en el conocimiento sobre este evento y la necesidad de llevar a cabo no solo una evaluación bucodental periódica de los miembros de las tripulaciones, además de ofrecerles tratamientos definitivos, con el fin de prevenir los accidentes aéreos.
Subject(s)
Orthognathic SurgeryABSTRACT
Introdução: o tratamento de dentes jovens traumatizados requer atenção especial, devido à possível presença de ápice incompleto e paredes dentinárias delgadas, o que pode dificultar ou comprometer o tratamento endodôntico convencional. Faz-se necessária a realização de um procedimento para induzir a formação de uma barreira mineralizada, com o auxílio de materiais biocompatíveis, como o hidróxido de cálcio e o agregado trióxido mineral (MTA). Objetivo: relatar um caso clínico em que foi realizada apicificação, com tampão de MTA, em um incisivo lateral superior traumatizado. Conclusão: o uso de MTA como material obturador de dentes com ápice incompleto mostrou- se eficiente, pois permitiu resolução do caso com sucesso e a manutenção do dente na arcada, exercendo suas funções primárias quanto à estética e à mastigação.