Raman spectroscopy as a PAT for pharmaceutical blending: Advantages and disadvantages.

Raman spectroscopy has been positively evaluated as a tool for the in-line and real-time monitoring of powder blending processes and it has been proved to be effective in the determination of the endpoint of the mixing, showing its potential role as process analytical technology (PAT). The aim of this study is to show advantages and disadvantages of Raman spectroscopy with respect to the most traditional HPLC analysis. The spectroscopic results, obtained directly on raw powders, sampled from a two-axis blender in real case conditions, were compared with the chromatographic data obtained on the same samples. The formulation blend used for the experiment consists of active pharmaceutical ingredient (API, concentrations 6.0% and 0.5%), lactose and magnesium stearate (as excipients). The first step of the monitoring process was selecting the appropriate wavenumber region where the Raman signal of API is maximal and interference from the spectral features of excipients is minimal. Blend profiles were created by plotting the area ratios of the Raman peak of API (AAPI) at 1598cm-1 and the Raman bands of excipients (AEXC), in the spectral range between 1560 and 1630cm-1, as a function of mixing time: the API content can be considered homogeneous when the time-dependent dispersion of the area ratio is minimized. In order to achieve a representative sampling with Raman spectroscopy, each sample was mapped in a motorized XY stage by a defocused laser beam of a micro-Raman apparatus. Good correlation between the two techniques has been found only for the composition at 6.0% (w/w). However, standard deviation analysis, applied to both HPLC and Raman data, showed that Raman results are more substantial than HPLC ones, since Raman spectroscopy enables generating data rich blend profiles. In addition, the relative standard deviation calculated from a single map (30 points) turned out to be representative of the degree of homogeneity for that blend time.

Micro-Raman spectroscopy as a routine tool for garnet analysis.

A rapid system to obtain molar compositions of minerals belonging to the garnet group by means of Raman spectroscopy is illustrated here. A series of standard garnets, whose composition was determined by means of Wavelength Dispersive System (WDS) electron microprobe measurements, was used to correlate the wavenumbers of the different Raman peaks with chemical composition. A simple software routine was then developed in order to obtain garnet molar composition starting from the Raman spectrum, based on the assumption that in a solid solution belonging to the garnet family the Raman wavenumbers are linear combinations of end member wavenumbers, weighted by their molar fraction. The choice of the Raman bands used for the calculations and their behaviour are also discussed. The method, called MIRAGEM (Micro-Raman Garnets Evaluation Method), was then tested on a second series of garnets with satisfactory results.

Green pigments of the Pompeian artists' palette.

Green colored samples on wall paintings and green powder from a pigment pot found in Pompeii area are investigated by micro-Raman, FT-IR and, for one sample, SEM-EDX. To obtain the green color, green earths and malachite were used, together with mixture of Egyptian blue and yellow ochre. The mineralogical identification of the green earths has been attempted through the comparison of the vibrational features, discriminating between celadonite and glauconite spectra. Traces of a modern synthetic pigment containing copper phthalocyanine were found in a fresco fragment.

X-ray reflectivity measurements of layer-by-layer films at the solid/liquid interface.

In this Letter, we present a method for the decoration of layer-by-layer (LbL) structures by heavy metal ions, which allows X-ray reflectivity (XRR) measurements at the solid/water interface. The improved contrast has allowed us to obtain well-structured X-ray reflectivity curves from samples at the liquid/solid interface that can be used for the film structure modeling. The developed technique was also used to follow the formation of complexes between DNA and the LbL multilayer. The XRR data are confirmed by independent null-ellipsometric measurements at the solid/liquid interface on the very same architectures.

Polarization holographic gratings in hybrid solgel films doped with Disperse Red 1.

Polarization holographic gratings in sp configuration are written at 488 nm in photorefractive organic-inorganic films based on SiO2. The films, prepared by a solgel technique, contain Disperse Red 1, carbazole units, and 2,4,7-trinitro-9-fluorenone. The gratings are characterized by their diffraction efficiency for a 632.8-nm probe. The polarization gratings act as a half-wave plate, and the diffraction efficiency is independent of the polarization direction of the probe.