ABSTRACT
Purpose: The aim of this study was to conduct a systematic literature review analyzing the results of in vivo rat femoral defect models using biomaterials for improving the induced membrane technique (IMT). Methods: Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines, the PubMed, Embase, and Web of Science databases were searched. Inclusion criteria were studies reporting results of the IMT in in vivo rat femoral critical-sized defect models using a biomaterial possibly combined with molecules. Methodologic quality was assessed with the Animal Research: Reporting In Vivo Experiments guidelines. Results: Twenty studies met the inclusion criteria. Femoral stabilization with plate and screws was the most frequent. Histologic, biomechanical, and/or radiologic analyses were performed. In two-stage strategies, the PMMA spacer could be associated with bioactive molecules to enhance IM growth factor expression and improve bone formation. Modulating the roughness of spacers could increase IM thickness and accelerate its formation. In one-stage strategies, human tissue-derived membranes combined with bone grafting achieved bone formation comparable to a standard IMT. All calcium phosphate grafts seemed to require a functionalization with growth factors or bone marrow mononuclear cells to improve outcomes compared with non-functionalized grafts. Conclusion: This systematic review described the main parameters of the in vivo rat femoral defect models using biomaterials to improve the induced membrane technique. Although the studies included had several methodological limitations that may limit the scope of these conclusions, one- and two-stage strategies reported promising results with biomaterials to improve the IMT.
ABSTRACT
Diabetic foot ulcers (DFU) are among the most common complications in diabetic patients and affect 6.8% of people worldwide. Challenges in the management of this disease are decreased blood diffusion, sclerotic tissues, infection, and antibiotic resistance. Hydrogels are now being used as a new treatment option since they can be used for drug delivery and to improve wound healing. This project aims to combine the properties of hydrogels based on chitosan (CHT) and the polymer of ß cyclodextrin (PCD) for local delivery of cinnamaldehyde (CN) in diabetic foot ulcers. This work consisted of the development and characterisation of the hydrogel, the evaluation of the CN release kinetics and cell viability (on a MC3T3 pre-osteoblast cell line), and the evaluation of the antimicrobial and antibiofilm activity (S. aureus and P. aeruginosa). The results demonstrated the successful development of a cytocompatible (ISO 10993-5) injectable hydrogel with antibacterial (99.99% bacterial reduction) and antibiofilm activity. Furthermore, a partial active molecule release and an increase in hydrogel elasticity were observed in the presence of CN. This leads us to hypothesise that a reaction between CHT and CN (a Schiff base) can occur and that CN could act as a physical crosslinker, thus improving the viscoelastic properties of the hydrogel and limiting CN release.
ABSTRACT
The aim of this work was to develop a filtering biocidal polypropylene (PP) nonwoven textile structure to block and inactivate airborne bacteria and viruses. PP filters were functionalized with a cyclodextrin (CD)-polycarboxylic acid-crosslinked polymer (PP-CD) through a pad/dry/curing process, and were then activated by padding in an alkyl dimethyl benzalkonium chloride (ADBAC) solution. The textile finishing process parameters were optimized with the perspective of mass production, considering the threshold temperature necessary for provoking crosslinking and the limitation of the low thermal stability of PP. The use of an aqueous solution containing hydroxypropyl-ß-cyclodextrin (HPßCD), 1,2,3,4-butanetetracarboxylic acid (BTCA), ammonium hypophosphite (AH), and a surfactant allowed immobilization of the optimal quantity of cyclodextrin polymer under curing for 5 minutes at 125 °C without affecting the nonwoven PP structure. The presence of CD drastically increased the sorption of ADBAC on the textiles. There was leaching of ADBAC at the first rinsing and then satisfactory fastness at the second and third rinsings, revealing adsorption mechanisms by weak physical interactions, ionic interactions, and inclusion of ADBAC inside the CD cavities. SEM revealed no clogging of the nonwoven pores, nor any increase in the air flow resistance, as evaluated by pressure drop measurements. The filtration efficiency of particulate matter PM3.0 and PM0.5 was moderately affected, in contrast to that of PM0.3, which greatly decreased due to the loss of the electrostatic charge of the filter upon the functionalization process. Bactericidal tests resulted in a reduction of 3 log10 against Staphylococcus aureus, and for virucidal tests on human coronavirus HCoV-229E, there was a reduction of 3.4 log10, with both strains undergoing 20 minutes of contact. Finally, the filter we developed is manufacturable by a scalable process, and because of its filtration and biocidal performances, it is a choice material as a self-disinfecting layer in the fabrication of facepiece respirators.
Subject(s)
Antiviral Agents , Polypropylenes , Humans , Polypropylenes/chemistry , Masks , Filtration/methods , TextilesABSTRACT
Three-dimensional printing (3DP) of thermoplastic polyurethane (TPU) is gaining interest in the medical industry thanks to the combination of tunable properties that TPU exhibits and the possibilities that 3DP processes offer concerning precision, time, and cost of fabrication. We investigated the implementation of a medical grade TPU by fused deposition modelling (FDM) for the manufacturing of an implantable medical device from the raw pellets to the gamma (γ) sterilized 3DP constructs. To the authors' knowledge, there is no such guide/study implicating TPU, FDM 3D-printing and gamma sterilization. Thermal properties analyzed by differential scanning calorimetry (DSC) and molecular weights measured by size exclusion chromatography (SEC) were used as monitoring indicators through the fabrication process. After gamma sterilization, surface chemistry was assessed by water contact angle (WCA) measurement and infrared spectroscopy (ATR-FTIR). Mechanical properties were investigated by tensile testing. Biocompatibility was assessed by means of cytotoxicity (ISO 10993-5) and hemocompatibility assays (ISO 10993-4). Results showed that TPU underwent degradation through the fabrication process as both the number-averaged (Mn) and weight-averaged (Mw) molecular weights decreased (7% Mn loss, 30% Mw loss, p < 0.05). After gamma sterilization, Mw increased by 8% (p < 0.05) indicating that crosslinking may have occurred. However, tensile properties were not impacted by irradiation. Cytotoxicity (ISO 10993-5) and hemocompatibility (ISO 10993-4) assessments after sterilization showed vitality of cells (132% ± 3%, p < 0.05) and no red blood cell lysis. We concluded that gamma sterilization does not highly impact TPU regarding our application. Our study demonstrates the processability of TPU by FDM followed by gamma sterilization and can be used as a guide for the preliminary evaluation of a polymeric raw material in the manufacturing of a blood contacting implantable medical device.
ABSTRACT
PURPOSE: To perform a systematic literature review to analyze the results of the in vivo animal models and strategies that use osteoinductive materials to enhance the tendon graft-bone interface for anterior cruciate ligament reconstruction (ACLR). METHODS: Following the Preferred Reporting Items for Systemic Reviews and Meta-Analysis guidelines, the PubMed, Embase, and Web of Science databases were searched. The inclusion criteria were studies of in vivo animal models of ACLR using a material to enhance tendon graft-bone interface healing and reporting at least the histologic results at the interface, along with radiologic and biomechanical data. Studies without control group or with another tendon-bone healing model were excluded. Methodologic quality was assessed with the Animal Research: Reporting In Vivo Experiments 1guidelines. RESULTS: Twenty-seven studies met the inclusion criteria. Rabbit was the main animal model of ACLR, along with sheep and dog models. ACLR procedures varied widely between studies.. The main promising strategies and materials were wrapping the material around the graft, with a collagen scaffold loaded with an osteoinductive molecule (mostly bone morphogenetic proteins). The second strategy consisted of injecting the material at the tendon-bone interface; calcium phosphate cement or a derivative were the most used materials. Finally, using osteoinductive fixation devices was the third strategy; magnesium-based interference screws seemed to show most favorable results. CONCLUSIONS: The studies retained had major methodologic flaws that limit the scope of these conclusions. However, based on histologic, biomechanical, and radiologic analyses, the most promising materials were a collagen scaffold loaded with an osteoinductive molecule and wrapped around the graft, calcium phosphate cement injected in the bone tunnel, and a magnesium-based fixation device. CLINICAL RELEVANCE: In vivo animal models have identified several promising strategies and materials to optimize the tendon-bone interface after ACLR, but standardized and reproducible assessments are needed before these strategies can be adopted clinically.
Subject(s)
Anterior Cruciate Ligament Injuries , Bone Substitutes , Animals , Rabbits , Sheep , Dogs , Anterior Cruciate Ligament/surgery , Magnesium , Wound Healing , Tendons/transplantation , Calcium Phosphates/pharmacology , Collagen , Bone Morphogenetic Proteins , Anterior Cruciate Ligament Injuries/pathologyABSTRACT
This work focuses on the manufacture of core-sheath nanofibers (NFs) based on chitosan (CHT) as sheath and cyclodextrin polymer (PCD) as core and loaded with triclosan (TCL). In parallel, monolithic NFs consisting of blended CHT-PCD and TCL were prepared. Nanofibers were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier Transform Infrared spectroscopy (FTIR). SEM displayed the morphology of NFs and the structure of the nanowebs, while TEM evidenced the core-sheath structure of NFs prepared by coaxial electrospinning. The core diameters and sheath thicknesses were found dependent on respective flow rates of both precursor solutions. Nanofibers stability and TCL release in aqueous medium were studied and correlated with the antibacterial activity against Staphylococcus aureus and Escherichia coli. Results showed that the release profiles of TCL and therefore the antibacterial activity were directly related to the type of nanofibers. In the case of monolithic nanofibers, the NFs matrix was composed of polyelectrolyte complex (PEC formed between CHT and PCD) and resulted in a prolonged release of TCL and a sustained antibacterial effect. In the case of core-sheath NFs, the PEC was formed only at the core-sheath interface, leading to less stable NFs and therefore to a faster release of TCL, and to a less extended antibacterial activity compared to monolithic ones.
ABSTRACT
We report the influence of treatment time of electrospun chitosan nanofibers (CHT NFs) in dopamine hydrochloride bath (2 mg.mL-1 in 10 mM Tris buffer, pH 8.5) on the extent of the polydopamine (pDA) coating on NFs surface. The reaction was characterized by FTIR and SEM analysis and the cytocompatibility of the scaffolds toward MT3C3-E1 cells was assessed. Biomimetic deposition of hydroxyapatite (HA) in 1.5xSBF batch was investigated by SEM-EDS and XRD. Samples treated in dopamine bath during 2 h promoted the structural stability of NFs in PBS, provided optimal cytocompatibility and induced the in vitro biomineralization from 6 days in 1.5xSBF. The XRD and SEM-EDS investigations confirmed formation of spherical-shaped particles composed of apatitic phase. Finally, this study shows that these NFs-pDA scaffolds prepared in the optimal experimental conditions defined here are promising candidates for application as osteoinductive scaffolds for bone regeneration applied to orthopedic and dental applications.
Subject(s)
Bone Regeneration/drug effects , Chitosan/chemistry , Indoles/chemistry , Nanofibers/chemistry , Polymers/chemistry , Tissue Scaffolds/chemistry , Animals , Cell Line , Chitosan/pharmacology , Durapatite/chemistry , Indoles/pharmacology , Mice , Microscopy, Electron, Scanning/methods , Osteogenesis/drug effects , Polymers/pharmacology , Spectroscopy, Fourier Transform Infrared/methods , Tissue Engineering/methodsABSTRACT
The 2019 coronavirus outbreak and worsening air pollution have triggered the search for manufacturing effective protective masks preventing both particulate matter and biohazard absorption through the respiratory tract. Therefore, the design of advanced filtering textiles combining efficient physical barrier properties with antimicrobial properties is more newsworthy than ever. The objective of this work was to produce a filtering electrospun membrane incorporating a biocidal agent that would offer both optimal filtration efficiency and fast deactivation of entrapped viruses and bacteria. After the eco-friendly electrospinning process, polyvinyl alcohol (PVA) nanofibers were stabilized by crosslinking with 1,2,3,4-butanetetracarboxylic acid (BTCA). To compensate their low mechanical properties, nanofiber membranes with variable grammages were directly electrospun on a meltblown polypropylene (PP) support of 30 g/m2. The results demonstrated that nanofibers supported on PP with a grammage of around only 2 g/m2 presented the best compromise between filtration efficiencies of PM0.3, PM0.5, and PM3.0 and the pressure drop. The filtering electrospun membranes loaded with benzalkonium chloride (ADBAC) as a biocidal agent were successfully tested against E. coli and S. aureus and against human coronavirus strain HCoV-229E. This new biocidal filter based on electrospun nanofibers supported on PP nonwoven fabric could be a promising solution for personal and collective protection in a pandemic context.
ABSTRACT
The aim of our study was to explore the potential value of metallic (Ag, Cu, and Zn) salts, polymer/metallic nanoparticles, and chlorhexidine (CHX) for improving the antimicrobial activity of calcium hydroxide (CH) against E. faecalis and C. albicans, associated with persistent endodontic infections. A first screening was performed by determining minimum inhibitory/bactericidal concentrations (MIC/MBC). Antimicrobial activity of the CH paste mixed with metallic salts, chitosan or cyclodextrin polymer metallic nanoparticles was compared to the antimicrobial activity of CH paste alone and CH + CHX using a time-kill kinetics assay. The effect of the antimicrobials on the rheological and the key mechanical properties were also examined. Copper and zinc were discarded because of their MIC/MBC values and silver because of its kill time curve profile. Except for a slower setting time after 24 h and a higher weight loss after 1 week of incubation, the mechanical behavior of the CH paste was unaffected by the addition of CHX. Polymeric/metallic nanoparticles failed to potentiate the antimicrobial effect of CH. By contrast, CHX increased this effect and thus could help eradicate E. faecalis associated with persistent root canal infections without altering the desired key physical properties of the CH paste.
ABSTRACT
This study consisted of developing a dressing loaded with silver (Ag) and ibuprofen (IBU) that provides a dual therapy, antibacterial and antalgic, intended for infected painful wounds. Therefore, non-woven polyethyleneterephtalate (PET) textiles nonwovens were pre-treated by cyclodextrin crosslinked with citric acid by a pad/dry/cure process. Then, textiles were impregnated in silver solution followed by a thermal treatment and were then coated by Layer-by-Layer (L-b-L) deposition of a polyelectrolyte multilayer (PEM) system consisting of anionic water-soluble poly(betacyclodextrin citrate) (PCD) and cationic chitosan. Finally, ibuprofen lysinate (IBU-L) was loaded on the PEM coating. We demonstrated the complexation of IBU with native ßCD and PCD by phase solubility diagram and 1H NMR. PEM system allowed complete IBU-L release in 6 h in PBS pH 7.4 batch (USP IV). On the other hand, microbiological tests demonstrated that loaded silver induced bacterial reduction of 4 Log10 against S. aureus and E. coli and tests revealed that ibuprofen lysinate loading did not interfere with the antibacterial properties of the dressing.
ABSTRACT
Vascularization is one of the main challenges in bone tissue engineering (BTE). In this study, vascular endothelial growth factor (VEGF), known for its angiogenic effect, was delivered by our developed sponge, derived from a polyelectrolyte complexes hydrogel between chitosan (CHT) and anionic cyclodextrin polymer (PCD). This sponge, as a scaffold for growth factor delivery, was formed by freeze-drying a homogeneous CHT/PCD hydrogel, and thereafter stabilized by a thermal treatment. Microstructure, water-uptake, biodegradation, mechanical properties, and cytocompatibility of sponges were assessed. VEGF-delivery following incubation in medium was then evaluated by monitoring the VEGF-release profile and its bioactivity. CHT/PCD sponge showed a porous (open porosity of 87.5%) interconnected microstructure with pores of different sizes (an average pore size of 153 µm), a slow biodegradation (12% till 21 days), a high water-uptake capacity (~600% in 2 h), an elastic property under compression (elastic modulus of compression 256 ± 4 kPa), and a good cytocompatibility in contact with osteoblast and endothelial cells. The kinetic release of VEGF was found to exert a pro-proliferation and a pro-migration effect on endothelial cells, which are two important processes during scaffold vascularization. Hence, CHT/PCD sponges were promising vehicles for the delivery of growth factors in BTE.
ABSTRACT
Infections represent a major medical concern and have severe impact on the public health economy. Antimicrobial coatings represent one major solution and are the subject of many investigations in academic and industrial research. Polyelectrolyte multilayers (PEMs) consist in the step-by-step deposition of polyanions and polycations films on surfaces. The wide range of disposable polyelectrolytes makes this approach among the most versatile methods as it allows to design surfaces that prevent bacterial adhesion, and kill bacteria by contact or by releasing antibacterial agents. The present work focused on the release-killing effect of an active PEM coating of a polyethylene terephthalate (PET) textile support. This activity was obtained thanks to the PEM film build up using cationic and anionic polyelectrolytes both based on cyclodextrins (PCD- and PCD+) that provided a reservoir property and prolonged release of triclosan (TCS). To this effect, a PET non-woven preliminarily modified with carboxylate groups by applying a thermofixation process was then treated by dip-coating, alternating soaking cycles in cationic PCD+ and in anionic PCD- solutions. Samples coated with such PEM film were then loaded with TCS whose release was assessed in dynamic mode in a phosphate buffered saline solution (PBS) at 37 °C. In parallel, TCS/PCD+ and TCS/PCD- interactions were investigated by Nuclear Magnetic Resonance (NMR) and phase solubility study, and the biocide activity was assessed against S. aureus and E. coli. Finally, the present study has demonstrated that our PCD+/PCD- PEM system presented release-killing properties that supplement the contact-killing effect of this system that was reported in a previous paper.
Subject(s)
Cyclodextrins , Escherichia coli , Polyelectrolytes , Staphylococcus aureus , TextilesABSTRACT
The main cause of failure of angioplasty stenting is restenosis due to neointimal hyperplasia, a too high proliferation of smooth muscle cells (SMC). The local and sustained delivery of selective pleiotropic drugs to limit SMC proliferation seems to be the hopeful solution to minimize this post surgery complication. The aim of this study is to develop a stent covered by nanofibers (NFs) produced by electrospinning, loaded with simvastatin (SV), a drug commonly used for restenosis prevention. NFs were prepared from the electrospinning of a solution containing SV and a mixture of chitosan (cationic) and ß-cyclodextrin (CD) polymer (anionic) which form together a polyelectrolyte complex that makes up the NFs matrix. First, the SV/CD interactions were studied by phase solubility diagram, DRX and DSC. The electrospinning process was then optimized to cover a self-expandable NiTiNOL stent and the mechanical resistance of the NFs sheath upon its introduction inside the delivery catheter was considered, using a crimper apparatus. The morphology, coating thicknesses and diameters of nanofibers were studied by scanning electron microscopy. The SV loading rates on the stents were controlled by the electrospinning time, and the presence of SV in the NFs was confirmed by FTIR. NFs stability in PBS pH 7.4 buffer could be improved after thermal post-treatment of NFs and in vitro release of SV in dynamic conditions demonstrated that the release profiles were influenced by the presence of CD polymer in NFs and by the thickness of the NFs sheath. Finally, a covered stent delivering 3 µg/mm2 of SV within 6 h was obtained, whose efficiency will be investigated in a further in vivo study.
Subject(s)
Angioplasty/instrumentation , Chitosan/chemistry , Drug Carriers , Drug-Eluting Stents , Hydroxymethylglutaryl-CoA Reductase Inhibitors/administration & dosage , Hydroxymethylglutaryl-CoA Reductase Inhibitors/chemistry , Nanofibers , Self Expandable Metallic Stents , Simvastatin/chemistry , beta-Cyclodextrins/chemistry , Alloys , Delayed-Action Preparations , Drug Compounding , Drug Liberation , Kinetics , Models, Chemical , Prosthesis Design , Simvastatin/administration & dosage , Solubility , Surface PropertiesABSTRACT
The elaboration of catalytic composite nanofibers (NFs) by electrospinning through a one-pot strategy is described. First, aqueous colloidal suspensions of ruthenium nanoparticles (Ru NPs) formed by reduction of a Ru(iii) salt with NaBH4 and stabilized by poly(cyclodextrin citrate) (PCD) were prepared. Then, poly(vinyl alcohol) (PVA) of different molecular weights was dissolved in the colloidal suspensions that were electrospun. SEM analyses of the resulting nanowebs displayed uniform NFs, whose diameters ranged between 300 and 700 nm and enlarged upon increasing (i) PVA molecular weight, (ii) nanosuspension viscosity, (iii) the amount of NaBH4 and (iv) the PCD/Ru NP concentration. TEM analysis confirmed that Ru NPs with a mean diameter of around 2 nm were observed at the surface of NFs, embedded in the PVA matrix of NFs. HAADF-STEM and EDS mapping clearly showed that Ru NPs were homogeneously distributed onto and into the matrix of NFs. After their electrospinning, the prepared nanowebs were submitted to a heat post-treatment at 160 °C which was shown to trigger the PVA crystallization. In addition, the physical crosslinking of PVA chains by NaBO2 resulting from NaBH4 oxidation in the precursor suspension was also observed. Interestingly, an SEM study evidenced that the thermal post-treatment in combination with the presence of NaBO2 clearly improved the thermal stability of the synthesized composite nanowebs. Finally, catalytic hydrogenation tests showed the absence of Ru NPs leaching from NFs in the reaction medium, and displayed good conversion of styrene into ethylbenzene.
ABSTRACT
The aim of this work is to design a wound dressing able to release chlorhexidine (CHX) as antiseptic agent, ensuring long-lasting antibacterial efficacy during the healing. The textile nonwoven (polyethylene terephthalate) (PET) of the dressing was first modified by chitosan (CHT) crosslinked with genipin (Gpn). Parameters such as the concentration of reagents (Gpn and CHT) but also the crosslinking time and the working temperature were optimized to reach the maximal positive charges surface density. This support was then treated by the layer-by-layer (LbL) deposition of a multilayer system composed of methyl-beta-cyclodextrin polymer (PCD) (anionic) and CHT (cationic). After a thermal treatment to stabilize the LbL film, the textiles were loaded with CHX as antiseptic agent. The influence of the thermal treatment i) on the cytocompatibility, ii) on the degradation of the multilayer system, iii) on CHX sorption and release profiles and iv) on the antibacterial activity of the loaded textiles was studied.
Subject(s)
Anti-Bacterial Agents/pharmacology , Bandages , Chlorhexidine/pharmacology , Coated Materials, Biocompatible/pharmacology , Textiles , Wound Healing/drug effects , Adsorption , Cell Line , Cell Survival/drug effects , Cross-Linking Reagents/chemistry , Drug Liberation , Hot Temperature , Humans , Iridoids/pharmacology , Microbial Sensitivity Tests , Polyelectrolytes/chemistry , Polyethylene Terephthalates/chemistry , Solubility , Staphylococcus aureus/drug effects , Time FactorsABSTRACT
Injectable pre-formed physical hydrogels provide many advantages for biomedical applications. Polyelectrolyte complexes (PEC) formed between cationic chitosan (CHT) and anionic polymers of cyclodextrin (PCD) render a hydrogel of great interest. Given the difference between water-soluble (PCDs) and water-insoluble PCD (PCDi) in the extension of polymerization, the present study aims to explore their impact on the formation and properties of CHT/PCD hydrogel obtained from the variable ratios of PCDi and PCDs in the formulation. Hydrogels CHT/PCDi/PCDs at weight ratios of 3:0:3, 3:1.5:1.5, and 3:3:0 were elaborated in a doubleâ»syringe system. The chemical composition, microstructure, viscoelastic properties, injectability, and structural integrity of the hydrogels were investigated. The cytotoxicity of the hydrogel was also evaluated by indirect contact with pre-osteoblast cells. Despite having similar shearâ»thinning and self-healing behaviors, the three hydrogels showed a marked difference in their rheological characteristics, injectability, structural stability, etc., depending on their PCDi and PCDs contents. Among the three, all the best above-mentioned properties, in addition to a high cytocompatibility, were found in the hydrogel 3:1.5:1.5. For the first time, we gained a deeper understanding of the role of the PCDi/PCDs in the injectable pre-formed hydrogels (CHT/PCDi/PCDs), which could be further fine-tuned to enhance their performance in biomedical applications.
ABSTRACT
The goal of the study was to elaborate an antibacterial silver wound dressing covered by a protective coating that would prevent silver diffusion toward skin without losing its biocide properties. Therefore, non woven polyethyleneterephtalate (PET) textiles were pre-treated by two types of polysaccharides - chitosan and cyclodextrin - both crosslinked with citric acid by a pad/dry/cure process. Both types of resulting thermofixed textiles carrying the citrate crosslinks were then impregnated in silver solution followed by a thermal treatment and were finally coated by Layer-by-Layer (L-b-L) deposition of a polyelectrolyte multilayer (PEM) film consisting of anionic water-soluble poly-cyclodextrin and cationic chitosan. The influence of the process parameters was investigated in terms of silver adsorption capacity, PEM system build-up, silver kinetics of release and antibacterial activity. We demonstrate i) the utility of the intermediate thermal treatment step in the reduction of silver leakage in the polyelectrolyte solutions used in the L-b-L process, ii) that silver adsorption on the preliminary thermofixed layers did not affect the PEM system build-up, iii) the slowing down of silver release kinetic thanks to the PEM coating, iv) the preservation of the antibacterial activity despite the PEM coating.
Subject(s)
Anti-Bacterial Agents/administration & dosage , Chemistry, Pharmaceutical/methods , Silver Compounds/administration & dosage , Wound Healing/drug effects , Anti-Bacterial Agents/pharmacology , Chitosan/chemistry , Citric Acid/chemistry , Cross-Linking Reagents/chemistry , Cyclodextrins/chemistry , Drug Liberation , Polyelectrolytes/chemistry , Silver Compounds/pharmacologyABSTRACT
The avoidance of post-herniorrhaphy pain can be challenging for hernia repair and has the greatest impact on patient's quality of life, health care utilisation and cost to society. Visceral meshes, functionalised with an efficient drug carrier system - hydroxypropyl beta-cyclodextrin polymer (polyHPßCD) coating, were developed to give a prolonged intraperitoneal analgesic drug release. We attempted to evaluate the in vivo pain-relief efficacy of ropivacaine loaded polyHPßCD functionalised polyester meshes in a rat model of visceral pain induced by colorectal distension (CRD). In vivo safety, pharmacokinetic proï¬le and biodegradation were measured via histological analysis and high-performance liquid chromatography, etc. The results confirmed that the polyHPßCD on the functionalised meshes has a high adsorption capacity of ropivacaine and resulted in a sustained drug release in rats after mesh implantation. This was further reaffirmed by an elevated pain threshold (30%) up to 4 days after implantation in the rat CRD model, compared to 1-2 days for non-adapted meshes. Neither polyHPßCD nor the loaded ropivacaine had a major impact on the inflammatory response. This evidence strongly suggests that polyHPßCD functionalised visceral mesh could be a promising approach for post-operative pain control by improving the intraperitoneal drug delivery and bioavailability.
Subject(s)
Anesthetics, Local/administration & dosage , Drug Delivery Systems/methods , Pain, Postoperative/drug therapy , Ropivacaine/administration & dosage , 2-Hydroxypropyl-beta-cyclodextrin/chemistry , Anesthetics, Local/pharmacokinetics , Anesthetics, Local/therapeutic use , Animals , Drug Carriers/chemistry , Drug Liberation , Male , Prostheses and Implants , Rats , Rats, Sprague-Dawley , Ropivacaine/pharmacokinetics , Ropivacaine/therapeutic use , Surgical MeshABSTRACT
The influence of HPßCD on the thermal denaturation of lysozyme was analyzed mainly from microcalorimetry and Raman investigations carried out in the molecular fingerprint and the low-frequency regions. It was shown that Raman spectroscopy investigations performed on a wide spectral range give the opportunity to describe the influence of HPßCD on the mechanism of protein denaturation. Using D2O as solvent allowed us to show that HPßCD mainly destabilizes the tertiary structure of lysozyme by enhancing the protein flexibility and thus inducing the destabilization of the secondary structure. Principal components analysis (PCA) was used for spectra treatment, providing important information about inclusion complex formation between protein hydrophobic residues and CDs molecules. Combining PCA and classical technics (curve fitting) of data analysis allowed a better understanding of the influence of HPßCD on the protein denaturation that seems to be related to the CDs capacity to form inclusion complex. It was observed that these interactions prevent the formation of new strong H-bonds between ß-sheet structures thereby inhibiting protein aggregation. This study reveals that CDs are promising systems for inhibiting protein aggregation without protein denaturation, only if designing derivative CDs is carefully controlled.
Subject(s)
2-Hydroxypropyl-beta-cyclodextrin/chemistry , Muramidase/chemistry , Spectrum Analysis, Raman/methods , beta-Cyclodextrins/chemistry , Animals , Calorimetry/methods , Hydrophobic and Hydrophilic Interactions , Principal Component Analysis , Protein Denaturation , Protein Stability , Protein Structure, Secondary , Solvents/chemistry , TemperatureABSTRACT
From 20th century, chitosan, a natural polysaccharide, has received much attention for use in biomedical applications thanks to its remarkable properties, such as biodegradability, biocompatibility, hemostasis and antibacterial activity. Over the last decades, many researchers have attempted to generate new chitosan derivatives-based biomaterials though chemical modifications, especially through sulfonation or sulfation reactions in order to tailor the physicochemical and biochemical properties. Due to the presence of residual amino groups, the generated polyampholytic derivatives are characterized by convenient biological properties, such as antioxidation, antiviral activity, anticoagulation and bone regeneration, expanding their application scope. This paper provides an overview of the strategies used to chemically modify chitosan by introduction of sulfonate groups on chitosan backbone, focusing on various sulfonating or sulfating agents used and substitution regioselectivity, and highlights their applications in biomedical field.