ABSTRACT
Cryptosporidium apicomplexan protozoa are ubiquitous intracellular agents affecting humans and animals. In particular, bovine cryptosporidiosis is recognized as endemic worldwide. However, epidemiological investigations remain limited in France regarding the burden of these parasites in cattle. To improve our understanding of the epidemiology of cryptosporidiosis, the main aim of this study was to determine the frequency and the genetic diversity of Cryptosporidium in adult Prim'Holstein dairy cattle farms in the north of France. Fecal specimens were collected from 1454 non-diarrheic and non-pregnant animals (nulli-, primi-, or multiparous) throughout 20 farms in an area of 110 km around Lille. For Cryptosporidium species identification, nested PCR followed by sequence and phylogenetic analyses were used. The overall frequency of Cryptosporidium spp. in-fection was 30.00% (C.I. 95%: 12.83-54.33) in farms and 0.89% (C.I. 95%: 0.498-1.57) at the individual level. In primi- or multiparous cows, only C. andersoni was found. C. ryanae, C. bovis/xiaoi and C. andersoni were detected in heifers. The phylogenetic tree confirmed that analyzed sequences were grouped with known reference sequences reported in dairy cattle. Further studies on the cumulative prevalence, risks factors and pathogenicity are needed to give a more accurate assessment of the impact of Cryptosporidium infection in dairy cattle in France.
ABSTRACT
The basis of any animal experimentation begins with the housing of animals that should take into account the need for splitting animals into similar groups. Even if it is generally recommended to use the minimum number of animals necessary to obtain reliable and statistically significant results (3Rs rule), the allocation of animals is currently mostly based on randomness. Since variability in gut microbiota is an important confounding factor in animal experiments, the main objective of this study was to develop a new approach based on 16S rRNA gene sequencing analysis of the gut microbiota of animals participating in an experiment, in order to correctly assign the animals across batches. For this purpose, a pilot study was performed on 20 mouse faecal samples with the aim of establishing two groups of 10 mice as similar as possible in terms of their faecal microbiota fingerprinting assuming that this approach limits future analytical bias and ensures reproducibility. The suggested approach was challenged with previously published data from a third-party study. This new method allows to embrace the unavoidable microbiota variability between animals in order to limit artefacts and to provide an additional assurance for the reproducibility of animal experiments.
Subject(s)
Microbiota , Research Design , Mice , Animals , RNA, Ribosomal, 16S/genetics , Reproducibility of Results , Pilot Projects , Microbiota/genetics , FecesABSTRACT
Pharmaceutical product development guided by Quality by Design (QbD) is based on a complete understanding of the critical process parameters (CPPs) that are important for achieving the desired product critical quality attributes (CQAs). The effect of process settings, such as the screw speed, the throughput, the barrel temperature, and the screw configuration, is a well-known factor in the setup of pharmaceutical hot melt extrusion (HME) processes. A CPP that has not yet been extensively researched is the type of cross-section geometry of the screw elements. Typically, pharmaceutical extruders have double-flighted screw cross-sections, with some elements having a single- or triple-flighted element section. The exception is a NANO16 extruder from Leistritz, with all screw elements having a triple-flighted screw geometry. We investigated the process setup and scale-up to a double-flighted extruder experimentally and in silico via a digital twin. Two formulations were processed on a NANO16 extruder and virtually transferred to a ZSE18 double-flighted co-rotating twin-screw extruder. Detailed smoothed particle hydrodynamics simulations of all screw elements available from both extruders were performed, and their efficiency in conveying, pressure build-up, and power consumption were studied. Reduced-order 1D HME simulations, which were carried out to investigate the process space and scalability of both extruders, were experimentally validated.
Subject(s)
Hot Melt Extrusion Technology , Hot Temperature , Drug Compounding , Temperature , Pharmaceutical Preparations , Technology, PharmaceuticalSubject(s)
Bacteria/isolation & purification , High-Throughput Nucleotide Sequencing/veterinary , Insemination, Artificial/veterinary , Semen/microbiology , Sus scrofa , Animals , Bacteria/classification , DNA, Bacterial/chemistry , DNA, Bacterial/isolation & purification , France , Insemination, Artificial/methods , Male , Metagenomics , Microbiota , RNA, Ribosomal, 16S/genetics , United StatesABSTRACT
Lipophilicity is of crucial importance in many fields including pharmaceutical, environmental, cosmetic and food industries. Whereas different experimental strategies have been developed for rapid lipophilicity determination of new chemical entities, log P determination of highly lipophilic compounds is always challenging. In this study, three published chromatographic methods have been compared on a series of phenylalkanoic acids including the pro-perfume HaloscentD (HD-C12). Different log P values were obtained depending on the chromatographic method used for log P estimation. Molecular modelling suggested that log P variations may be due to the chromatographic conditions applied (isocratic or gradient mode, ratio methanol/water in the mobile phase), responsible of specific conformations of the molecule in solution. Thus, for flexible compounds, published methods have to be used with caution and considered as a good tool to estimate a log P range, depending on the molecular conformational state.
Subject(s)
Lipids/chemistry , Chromatography, High Pressure Liquid , Models, MolecularABSTRACT
The detection and early identification of natural products (NPs) for dereplication purposes require efficient, high-resolution methods for the profiling of crude natural extracts. This task is difficult because of the high number of NPs in these complex biological matrices and because of their very high chemical diversity. Metabolite profiling using ultra-high pressure liquid chromatography coupled to high-resolution mass spectrometry (UHPLCHR-MS) is very efficient for the separation of complex mixtures and provides molecular formula information as a first step in dereplication. This structural information alone or even combined with chemotaxonomic information is often not sufficient for unambiguous metabolite identification. In this study, a representative set of 260 NPs containing C, H, and O atoms only was analysed in generic UHPLCHR-MS profiling conditions. Two easy to use quantitative structure retention relationship (QSRR) models were built based on the measured retention time and on eight simple physicochemical parameters calculated from the structures. First, an original approach using several partial least square (PLS) regressions according to the phytochemical classes provided satisfactory results with an easy calculation. Secondly, a unique artificial neural network (ANN) model provided similar results on the whole set of NPs but required dedicated software. The retention prediction methods described in this study were found to improve the level of confidence of the identification of given analytes among putative isomeric structures. Its applicability was verified for the dereplication of NPs in model plant extracts.
Subject(s)
Biological Products , Metabolomics , Models, Molecular , Algorithms , Biological Products/analysis , Biological Products/chemistry , Chromatography, High Pressure Liquid , Databases, Factual , Italy , Molecular Structure , Panax/chemistryABSTRACT
A capillary isoelectric focusing (cIEF) method was developed for the determination of the ionization constants (pKa) of small molecules. Two approaches used to decrease the electroosmotic flow (EOF) were compared: (i) a hydroxypropylcellulose (HPC) coated capillary in aqueous medium and (ii) the addition of glycerol to act as a viscosifying agent. The cIEF method with the glycerol medium was selected, and the ionization constants of 22 basic and 21 acidic compounds, including 15 pharmaceutical drugs, were determined, resulting in pKa values from 3.5 to 7.4 and 6.4 to 9.3, respectively. cIEF offers an interesting alternative to other techniques for pKa determination with low sample consumption, high throughput and low cost.
Subject(s)
Isoelectric Focusing , Small Molecule Libraries/chemistry , Cellulose/analogs & derivatives , Cellulose/chemistry , Glycerol/chemistry , Hydrogen-Ion Concentration , Molecular WeightABSTRACT
The parallel artificial membrane permeability assay (PAMPA) is a high-throughput screening (HTS) method that is widely used to predict in vivo passive permeability through biological barriers, such as the skin, the blood brain barrier (BBB) and the gastrointestinal tract (GIT). The PAMPA technique has also been used to predict the dissociation constant (Kd) between a compound and human serum albumin (HSA) while disregarding passive permeability. Furthermore, the assay is based on the use of two separate 5-point kinetic experiments, which increases the analysis time. In the present study, we adapted the hexadecane membrane (HDM)-PAMPA assay to both predict passive gastrointestinal absorption via the permeability coefficient logPe value and determine the Kd. Two assays were performed: one in the presence and one in the absence of HSA in the acceptor compartment. In the absence of HSA, logPe values were determined after a 4-h incubation time, as originally described, but the dimethylsulfoxide (DMSO) percentage and pH were altered to be compatible with the protein. In parallel, a second PAMPA assay was performed in the presence of HSA during a 16-h incubation period. By adding HSA, a variation in the amount of compound crossing the membrane was observed compared to the permeability measured in the absence of HSA. The concentration of compound reaching the acceptor compartment in each case was used to determine both parameters (logPe and logKd) using numerical simulations, which highlighted the originality of this method because these calculations required only two endpoint measurements instead of a complete kinetic study. It should be noted that the amount of compound that reaches the acceptor compartment in the presence of HSA is modulated by complex dissociation in the receptor compartment. Only compounds that are moderately bound to albumin (-3Subject(s)
High-Throughput Screening Assays
, Intestinal Absorption
, Membranes, Artificial
, Permeability
, Serum Albumin/metabolism
, Alkanes/chemistry
, Humans
, Kinetics
, Serum Albumin/chemistry
ABSTRACT
The design and synthesis of a new class of nonpeptide direct thrombin inhibitors, built on the structure of 1-(pyridin-4-yl)piperidine-4-carboxamide, are described. Starting from a strongly basic 1-amidinopiperidine derivative (6) showing poor thrombin (fIIa) and factor Xa (fXa) inhibition activities, anti-fIIa activity and artificial membrane permeability were considerably improved by optimizing the basic P1 and the X-substituted phenyl P4 binding moieties. Structure-activity relationship studies, usefully complemented with molecular modeling results, led us to identify compound 13b, which showed excellent fIIa inhibition (Ki = 6 nM), weak anti-Xa activity (Ki = 5.64 µM), and remarkable selectivity over other serine proteases (e.g., trypsin). Compound 13b showed in vitro anticoagulant activity in the low micromolar range and significant membrane permeability. In mice (ex vivo), 13b demonstrated anticoagulant effects at 2 h after oral dosing (100 mg·kg(-1)), with a significant 43% prolongation of the activated partial thromboplastin time (aPTT), over controls (P < 0.05).
Subject(s)
Anticoagulants/pharmacology , Blood Coagulation/drug effects , Enzyme Inhibitors/pharmacology , Factor X/antagonists & inhibitors , Piperidines/pharmacology , Pyrrolidines/pharmacology , Thrombin/antagonists & inhibitors , Animals , Anticoagulants/chemical synthesis , Anticoagulants/chemistry , Blood Coagulation Tests , Cattle , Crystallography, X-Ray , Dose-Response Relationship, Drug , Enzyme Inhibitors/chemical synthesis , Enzyme Inhibitors/chemistry , Humans , Male , Mice , Models, Molecular , Molecular Dynamics Simulation , Molecular Structure , Piperidines/chemical synthesis , Piperidines/chemistry , Pyrrolidines/chemical synthesis , Pyrrolidines/chemistry , Serine Proteases/metabolism , Structure-Activity Relationship , Thrombin/metabolismABSTRACT
In the field of drug delivery systems, microparticles made of polymeric matrix appear as an attractive approach. The in vitro release kinetic profile is crucial information when developing new particulate formulations. These data are essential for batch to batch comparison, quality control as well as for anticipation of in vivo behavior to select the best formulation to go further in preclinical investigations. The methods available present common drawbacks such as the time- and compound-consumption that does not fit with formulation screening requirements in early development stages. In this study, a new microscale high throughput screening (HTS) method has been developed to investigate drug release kinetic from piroxicam-loaded polylactic acid (PLA) and polylactic-co-glycolic acid (PLGA) microparticles. The method is a sample- and separation-based method where separation is performed by filtration using 96-well micro filter plates. 96 experiments can therefore be performed on one plate in one time in a fully automated way and with a very low sample and particle consumption. The influence of different parameters controlling release profiles was also investigated using this technique. The HTS method gave the same release profile than the standard dialysis method. Shaking, particle concentration, and the nature of the release medium were found to be of influence. The HTS method appears as a reliable method to evaluate drug release from particles with smaller standard deviation and less consumption of material.
Subject(s)
Anti-Inflammatory Agents, Non-Steroidal/chemistry , Lactic Acid/chemistry , Piroxicam/chemistry , Polyesters/chemistry , Polyglycolic Acid/chemistry , Anti-Inflammatory Agents, Non-Steroidal/administration & dosage , Automation, Laboratory , Chemical Phenomena , Delayed-Action Preparations/administration & dosage , Delayed-Action Preparations/chemistry , Drug Compounding , Filtration , High-Throughput Screening Assays , Kinetics , Microchemistry , Microscopy, Electron, Scanning , Microspheres , Particle Size , Piroxicam/administration & dosage , Polylactic Acid-Polyglycolic Acid Copolymer , Quality Control , Reproducibility of Results , Solubility , Surface PropertiesABSTRACT
The drug discovery process for drugs that target the central nervous system suffers from a very high rate of failure due to the presence of the blood-brain barrier, which limits the entry of xenobiotics into the brain. To minimise drug failure at different stages of the drug development process, new methodologies have been developed to understand the absorption, distribution, metabolism, excretion and toxicity (ADMET) profile of drug candidates at early stages of drug development. Additionally, understanding the permeation of drug candidates is also important, particularly for drugs that target the central nervous system. During the first stages of the drug discovery process, in vitro methods that allow for the determination of permeability using high-throughput screening methods are advantageous. For example, performing the parallel artificial membrane permeability assay followed by cell-based models with interesting hits is a useful technique for identifying potential drugs. In silico models also provide interesting information but must be confirmed by in vitro models. Finally, in vivo models, such as in situ brain perfusion, should be studied to reduce a large number of drug candidates to a few lead compounds. This article reviews the different methodologies used in the drug discovery and drug development processes to determine the permeation of drug candidates through the blood-brain barrier.
Subject(s)
Blood-Brain Barrier/metabolism , Drug Evaluation, Preclinical/methods , Pharmaceutical Preparations/administration & dosage , Pharmacokinetics , Animals , Biological Transport , Humans , PermeabilityABSTRACT
Lipophilicity is a crucial parameter in drug development since it impacts both ADME properties and target affinity of drug candidates. In early drug discovery stage, accurate tools for logP prediction are highly desired. Many calculation methods were developed to aid pharmaceutical scientists in drug research; however almost all suffer from insufficient accuracy and variation of performance in several regions of the chemical space associated with new chemical entities. The low predictive power of existing software packages can be explained by limited availability and/or variable quality of experimental logP values associated with training set used, which stem from various protocols and poorly cover chemical space. In this study, a dataset of 1000 diverse test compounds out of 4.5 million was generated; logP values of 759 purchasable compounds (46% non-ionizable, 30% basic, 17% acidic, 0.5% zwitterionic and 6.5% ampholytes) from this selected set were experimentally determined by UHPLC followed by UV detection or MS detection when necessary. Finally, a data collection of 707 validated logP values ranging from 0.30 to 7.50 is now available for benchmarking of existing and development of new approaches to predict octanol/water partition coefficients of chemical compounds.
Subject(s)
1-Octanol/chemistry , Pharmaceutical Preparations/chemistry , Water/chemistry , Benchmarking , Chromatography, High Pressure Liquid/methods , Drug Design , Mass SpectrometryABSTRACT
In this study, the retention factors (logk) of 44 polar neutral compounds were measured using hydrophilic interaction chromatography (HILIC). This retention parameter was compared with experimental logPalk obtained by a traditional method (shake-flask) or with the calculated logPalk for the most hydrophilic compounds. A good correlation was obtained between logk90 (measured with a mobile phase containing 90% acetonitrile) and logPalk. In contrast, no correlation was obtained between the retention factor and logPoct. This method could thus represent an advantageous alternative and reliable method to characterise the lipophilicity of polar compounds in an alkane/water system by chromatography, providing an important insight in (Q)SAR studies to predict drug permeation through numerous biorelevant membranes.
Subject(s)
Alkanes/chemistry , Chromatography, Liquid/methods , Organic Chemicals/analysis , Organic Chemicals/chemistry , Water/chemistry , Acetonitriles/chemistry , Hydrophobic and Hydrophilic Interactions , Linear ModelsABSTRACT
Successful drug design requires not only the detailed knowledge of the pharmacokinetic and pharmacodynamic profiles of the drug candidate portfolio but also a thorough documentation of the possible toxic effects on humans and the environment. Thus, experimental and computational strategies able to measure or predict specific profiles of designed compounds related to their potential toxicity are highly desired. Moreover, a strategy to avoid toxic effects thus enhancing the potential efficacy of drug candidates is of great interest. To fulfil this aim, the pharmacochemistry research unit at the EPGL has recently developed and improved methodologies that detect the potential human health and environmental hazards of compounds active against neurodegeneration at an early stage. A three-step strategy is presented herein. In particular, i) an alternative index to model the bioconcentration of chemicals in the environment was determined; ii) the antioxidant activity of chemical species against free radicals was evaluated. Moreover, since antioxidants play a key role in both toxicity prevention and neuroprotection, iii) the potential interaction of such compounds with enzymatic targets involved in the neurodegenerative cascade was investigated in silico.
Subject(s)
Neurodegenerative Diseases/drug therapy , Neuroprotective Agents/pharmacology , Algorithms , Antioxidants/pharmacology , Chromatography, High Pressure Liquid , Computer Simulation , Environmental Pollution , Humans , Neuroprotective Agents/chemistry , Neuroprotective Agents/toxicityABSTRACT
Plants belonging to the Lippia genus have been widely used in ethnobotany throughout South and Central America and in tropical Africa as foods, medicines, sweeteners and in beverage flavouring. Various taxonomic problems involving some genera from Verbenaceae, including Lippia, have been reported. In this study, the metabolite profiling of fifteen extracts of various organs of six Lippia species was performed and compared using UHPLC-PDA-TOF-MS. Fourteen phenolic compounds that were previously isolated from L. salviaefolia Cham. and L. lupulina Cham. were used as references. The annotation of the remaining LC peaks was based on concomitant online high mass accuracy measurements and subsequent molecular formula assignments following these different steps: (i) elimination of non-coherent putative molecular formulae by heuristic filtering, (ii) verification of the occurrence of remaining molecular formulae in databases, (iii) cross search with reported compounds in the Lippia genus, (iv) match with reported UV spectra, (v) estimation of the chromatographic retention behaviour based on the log P parameter of reference compounds. This strategy is generic and time-saving, avoids isolation/purification procedures, enables an efficient LC peak annotation of most of the studied compounds and is well adapted for plant chemotaxonomic studies. Within this study, the interconversion of four flavanone glucoside isomers was additionally highlighted by analytical HPLC isolation and immediate analysis using fast UHPLC gradients. Dereplication results and hierarchical data analysis demonstrated that L. salviaefolia, L. balansae, L. velutina and L. sidoides displayed significant chemical similarities, while the compositions of L. lasiocalicyna and L. lupulina differed substantially.
Subject(s)
Chromatography, High Pressure Liquid/methods , Lippia/chemistry , Mass Spectrometry/methods , Plant Extracts/chemistry , Cluster Analysis , Flavanones/analysis , Flavanones/chemistry , Lippia/metabolism , Metabolome , Metabolomics/methodsABSTRACT
Protein aggregation is a major instability that can occur during all stages of protein drug production and development. Protein aggregates may compromise the safety and efficacy of the final protein formulation. In this paper, various new excipients [phenylbutylamino-, benzyl-, and cholesteryl-polyethylene glycols (PEGs)] and their use for the reduction of aggregation of salmon calcitonin (sCT) and hen egg-white lysozyme (HEWL) by noncovalent PEGylation are presented. The ability to suppress aggregation of sCT in various buffer systems at a 1:1 molar ratio was assessed by following changes in protein conformation and aggregation state over time. The results are compared with that of dansyl- and L-tryptophan (Trp)-PEGs described in earlier publications. Furthermore, the influence of the different PEG-based excipients on the aggregation of HEWL was measured. HEWL aggregation was completely suppressed in the presence of cholesteryl-PEGs (2 and 5 kDa), whereas deterioration was observed using benzyl-methoxy polyethylene glycols (mPEGs; 2 and 5 kDa). Phenylbutylamino- and Trp-mPEG (2 kDa), as well as dansyl-PEGs of different molecular weight prolonged the lag phase of aggregation and reduced the aggregation velocity of HEWL.
Subject(s)
Calcitonin/chemistry , Muramidase/chemistry , Polyethylene Glycols/chemistryABSTRACT
A new class of co-drugs were synthesised by joining antioxidant edaravone with a vasodilating substructure containing NO-donor nitrooxy functions, and characterised for their stability in different media, lipophilicity and permeability profile. The products display good stability in water/co-solvent at different pH. Conversely, they are rapidly metabolised into edaravone and NO-donor moieties when incubated in human serum or rat-liver homogenates. In the latter conditions time dependent production of nitrite/nitrate (NO(x)) occurs. The compounds display wide-ranging lipophilicity. PAMPA studies predict good gastrointestinal absorption for a number of these compounds. The title products are potentially useful for treating ROS-related conditions accompanied by decreased NO availability.
Subject(s)
Antipyrine/analogs & derivatives , Vasodilator Agents/chemical synthesis , Animals , Antipyrine/chemical synthesis , Antipyrine/chemistry , Antipyrine/pharmacokinetics , Drug Stability , Edaravone , Humans , Nitrates/metabolism , Nitric Oxide Donors/chemical synthesis , Nitric Oxide Donors/chemistry , Nitric Oxide Donors/pharmacokinetics , Nitrites/metabolism , Permeability , Rats , Vasodilator Agents/chemistry , Vasodilator Agents/pharmacokineticsABSTRACT
This phase II, multicenter, randomized, double-blind, non-comparative study assessed the efficacy and safety of immediate-release octreotide and octreotide LAR, in combination with corticosteroids and standard medical care, on the symptoms of inoperable malignant bowel obstruction (MBO) due to peritoneal carcinomatosis. The primary efficacy endpoint was "success" at day 14 defined as a composite endpoint including the absence of a nasogastric tube, and vomiting less than twice per day and no use of anticholinergic agents. Patients in the octreotide arm received octreotide LAR 30 mg intramuscular (im) on days 1, 29 and 57, as well as daily immediate-release octreotide 600 µg per day plus methylprednisolone on days 1 to 6. Placebo-treated patients received methylprednisolone and matched placebo instead of octreotide. Difficulties associated with enrolling patients at palliative-care stage meant only 64 patients (instead of the planned 102 patients) were randomized, 32 to octreotide and 32 to placebo. Despite randomization, more patients in the octreotide arm (46.4%) than in the placebo arm (21.9%) had a baseline Karnofsky score less than 50. An intention-to-treat analysis showed that in the octreotide and placebo arms, 12 (38%) and nine (28%), respectively, patients were successfully treated at day 14, which increased to 9/15 (60%) and 7/25 (28%), respectively, among patients with a baseline Karnofsky score greater or equal to 50. Octreotide-treated patients reported three drug-related adverse events (AEs), and no drug-related serious AEs or deaths. Octreotide LAR may have a key role in treating patients with a MBO due to peritoneal carcinomatosis, particularly in those with moderately severe disease.
Subject(s)
Antiemetics/therapeutic use , Carcinoma/complications , Gastrointestinal Agents/therapeutic use , Intestinal Obstruction/drug therapy , Methylprednisolone/therapeutic use , Octreotide/therapeutic use , Peritoneal Neoplasms/complications , Aged , Device Removal , Double-Blind Method , Drug Therapy, Combination/methods , Female , France , Gastrointestinal Agents/adverse effects , Humans , Intestinal Obstruction/etiology , Intubation, Gastrointestinal/instrumentation , Karnofsky Performance Status , Male , Middle Aged , Octreotide/adverse effects , Pilot Projects , Vomiting/prevention & controlABSTRACT
New chloro-substituted biarylmethoxyphenyl piperidine-4-carboxamides were synthesized and assayed in vitro as inhibitors of the blood coagulation enzymes factor Xa (fXa) and thrombin. An investigation of effects of the amidine and isopropyl groups attached at the piperidine nitrogen and 5-(halogenoaryl)isoxazol-3-yl groups as biaryl substituents led us to identify new compounds which proved to be selective fXa inhibitors, with inhibition constants in the low nanomolar range. The most potent compound 21e, that incorporates 2-Cl-thiophen-5-yl group as the P1 motif and 1-isopropylpiperidine P4 group, inhibited fXa with K(i) value of 0.3nM and very high selectivity over thrombin and some other tested serine proteases, achieving moderate levels of anticoagulant activity in the low micromolar range, as assessed by the prothrombin time clotting assay (PT(2)=3.30µM). Based on reliable docking simulations, molecular modeling provided a rationale for interpreting structure-activity relationships. The predicted binding modes highlighted the structural requirements for addressing the subsites S1 and S4 of the fXa enzyme.