Long-Term Resistance Trained Human Muscles Have More Fibres, More Myofibrils and Tighter Myofilament Packing than Untrained.

INTRODUCTION: Increases in skeletal muscle size occur in response to prolonged exposure to resistance training that is typically ascribed to increased muscle fibre size. Whether muscle fibre number also changes remains controversial, and a paucity of data exists about myofibrillar structure. This cross-sectional study compared muscle fibre and myofibril characteristics in long-term resistance-trained (LRT) versus untrained (UNT) individuals. METHODS: The maximal anatomical cross-sectional area (ACSAmax) of the biceps brachii muscle was measured by MRI in 16 LRT (5.9 ± 3.5 years' experience) and 13 UNT males. A muscle biopsy was taken from the biceps brachii to measure muscle fibre area, myofibril area and myosin spacing. Muscle fibre number, myofibril number in total and per fibre were estimated by dividing ACSAmax by muscle fibre area or myofibril area, and muscle fibre area by myofibril area, respectively. RESULTS: Compared to UNT, LRT individuals had greater ACSAmax (+70%, P < 0.001), fibre area (+29%, P = 0.028), fibre number (+34%, P = 0.013), and myofibril number per fibre (+49%, P = 0.034) and in total (+105%, P < 0.001). LRT individuals also had smaller myosin spacing (-7%, P = 0.004; i.e. greater packing density) and a tendency towards smaller myofibril area (-16%, P = 0.074). ACSAmax was positively correlated with fibre area ( r = 0.526), fibre number ( r = 0.445) and myofibril number (in total r = 0.873 and per fibre r = 0.566), and negatively correlated with myofibril area ( r = -0.456) and myosin spacing ( r = -0.382) (all P < 0.05). CONCLUSIONS: The larger muscles of LRT individuals exhibited more fibres in cross-section and larger muscle fibres, which contained substantially more total myofibrils and more packed myofilaments than UNT participants, suggesting plasticity of muscle ultrastructure.

Combined effects of green tea supplementation and eccentric exercise on nuclear factor erythroid 2-related factor 2 activity.

PURPOSE: This study investigated whether combining eccentric exercise and green tea supplementation synergistically increased nuclear factor erythroid 2-related factor 2 (NRF2) activity, a transcription factor responsible for coordinating endogenous antioxidant expression. METHODS: In a double-blinded, randomized, between-subjects design, 24 males (mean [SD]; 23 [3] years, 179.6 [6.1] cm, 78.8 [10.6] kg) performed 100 drop jumps following a 6 days supplementation period with either green tea (poly)phenols (n = 12; 500 mg·d-1) or a placebo (n = 12; inulin). NRF2/antioxidant response element (ARE) binding in peripheral blood mononuclear cells (PBMCs), catalase (CAT) and glutathione reductase (GR) activity, 8-hydroxy-2'-deoxyguanosine (8-OHdG) excretion, and differential leukocyte counts were measured pre-, post-, 1 h and 24 h post-exercise. RESULTS: Exercise did not increase NRF2/ARE binding (p = 0.12) (fold change vs rest: green tea = [post] 0.78 ± 0.45, [1 h] 1.17 ± 0.54, [24 h] 1.06 ± 0.56; placebo = [post] 1.40 ± 1.50, [1 h] 2.98 ± 3.70, [24 h] 1.04 ± 0.45). Furthermore, CAT activity (p = 0.12) and 8-OHdG excretion (p = 0.42) were unchanged in response to exercise and were not augmented by green tea supplementation (p > 0.05 for all). Exercise increased GR activity by 30% (p = 0.01), however no differences were found between supplement groups (p = 0.51). Leukocyte and neutrophil concentrations were only elevated post-exercise (p < 0.001 for all). CONCLUSION: Eccentric exercise, either performed alone or in conjunction with green tea supplementation, did not significantly increase NRF2 activity in PBMCs. TRIAL REGISTRATION NUMBER: osf.io/kz37g (registered: 15/09/21).

Mechanically demanding eccentric exercise increases nuclear factor erythroid 2-related factor 2 activity in human peripheral blood mononuclear cells.

PRE-REGISTRATION NUMBER: osf.io/kz37g.

Non-invasive estimation of muscle fibre size from high-density electromyography.

Because of the biophysical relation between muscle fibre diameter and the propagation velocity of action potentials along the muscle fibres, motor unit conduction velocity could be a non-invasive index of muscle fibre size in humans. However, the relation between motor unit conduction velocity and fibre size has been only assessed indirectly in animal models and in human patients with invasive intramuscular EMG recordings, or it has been mathematically derived from computer simulations. By combining advanced non-invasive techniques to record motor unit activity in vivo, i.e. high-density surface EMG, with the gold standard technique for muscle tissue sampling, i.e. muscle biopsy, here we investigated the relation between the conduction velocity of populations of motor units identified from the biceps brachii muscle, and muscle fibre diameter. We demonstrate the possibility of predicting muscle fibre diameter (R2  = 0.66) and cross-sectional area (R2  = 0.65) from conduction velocity estimates with low systematic bias (∼2% and ∼4% respectively) and a relatively low margin of individual error (∼8% and ∼16%, respectively). The proposed neuromuscular interface opens new perspectives in the use of high-density EMG as a non-invasive tool to estimate muscle fibre size without the need of surgical biopsy sampling. The non-invasive nature of high-density surface EMG for the assessment of muscle fibre size may be useful in studies monitoring child development, ageing, space and exercise physiology, although the applicability and validity of the proposed methodology need to be more directly assessed in these specific populations by future studies. KEY POINTS: Because of the biophysical relation between muscle fibre size and the propagation velocity of action potentials along the sarcolemma, motor unit conduction velocity could represent a potential non-invasive candidate for estimating muscle fibre size in vivo. This relation has been previously assessed in animal models and humans with invasive techniques, or it has been mathematically derived from simulations. By combining high-density surface EMG with muscle biopsy, here we explored the relation between the conduction velocity of populations of motor units and muscle fibre size in healthy individuals. Our results confirmed that motor unit conduction velocity can be considered as a novel biomarker of fibre size, which can be adopted to predict muscle fibre diameter and cross-sectional area with low systematic bias and margin of individual error. The proposed neuromuscular interface opens new perspectives in the use of high-density EMG as a non-invasive tool to estimate muscle fibre size without the need of surgical biopsy sampling.

Neural decoding from surface high-density EMG signals: influence of anatomy and synchronization on the number of identified motor units.

Objective.High-density surface electromyography (HD-sEMG) allows the reliable identification of individual motor unit (MU) action potentials. Despite the accuracy in decomposition, there is a large variability in the number of identified MUs across individuals and exerted forces. Here we present a systematic investigation of the anatomical and neural factors that determine this variability.Approach. We investigated factors of influence on HD-sEMG decomposition, such as synchronization of MU discharges, distribution of MU territories, muscle-electrode distance (MED-subcutaneous adipose tissue thickness), maximum anatomical cross-sectional area (ACSAmax), and fiber cross-sectional area. For this purpose, we recorded HD-sEMG signals, ultrasound and magnetic resonance images, and took a muscle biopsy from the biceps brachii muscle from 30 male participants drawn from two groups to ensure variability within the factors-untrained-controls (UT = 14) and strength-trained individuals (ST = 16). Participants performed isometric ramp contractions with elbow flexors (at 15%, 35%, 50% and 70% maximum voluntary torque-MVT). We assessed the correlation between the number of accurately detected MUs by HD-sEMG decomposition and each measured parameter, for each target force level. Multiple regression analysis was then applied.Main results.ST subjects showed lower MED (UT = 5.1 ± 1.4 mm; ST = 3.8 ± 0.8 mm) and a greater number of identified MUs (UT: 21.3 ± 10.2 vs ST: 29.2 ± 11.8 MUs/subject across all force levels). The entire cohort showed a negative correlation between MED and the number of identified MUs at low forces (r= -0.6,p= 0.002 at 15% MVT). Moreover, the number of identified MUs was positively correlated to the distribution of MU territories (r= 0.56,p= 0.01) and ACSAmax(r= 0.48,p= 0.03) at 15% MVT. By accounting for all anatomical parameters, we were able to partly predict the number of decomposed MUs at low but not at high forces.Significance.Our results confirmed the influence of subcutaneous tissue on the quality of HD-sEMG signals and demonstrated that MU spatial distribution and ACSAmaxare also relevant parameters of influence for current decomposition algorithms.

Physiological and pathophysiological concentrations of fatty acids induce lipid droplet accumulation and impair functional performance of tissue engineered skeletal muscle.

Fatty acids (FA) exert physiological and pathophysiological effects leading to changes in skeletal muscle metabolism and function, however, in vitro models to investigate these changes are limited. These experiments sought to establish the effects of physiological and pathophysiological concentrations of exogenous FA upon the function of tissue engineered skeletal muscle (TESkM). Cultured initially for 14 days, C2C12 TESkM was exposed to FA-free bovine serum albumin alone or conjugated to a FA mixture (oleic, palmitic, linoleic, and α-linoleic acids [OPLA] [ratio 45:30:24:1%]) at different concentrations (200 or 800 µM) for an additional 4 days. Subsequently, TESkM morphology, functional capacity, gene expression and insulin signaling were analyzed. There was a dose response increase in the number and size of lipid droplets within the TESkM (p < .05). Exposure to exogenous FA increased the messenger RNA expression of genes involved in lipid storage (perilipin 2 [p < .05]) and metabolism (pyruvate dehydrogenase lipoamide kinase isozyme 4 [p < .01]) in a dose dependent manner. TESkM force production was reduced (tetanic and single twitch) (p < .05) and increases in transcription of type I slow twitch fiber isoform, myosin heavy chain 7, were observed when cultured with 200 µM OPLA compared to control (p < .01). Four days of OPLA exposure results in lipid accumulation in TESkM which in turn results in changes in muscle function and metabolism; thus, providing insight ito the functional and mechanistic changes of TESkM in response to exogenous FA.

Mechanical loading of bioengineered skeletal muscle in vitro recapitulates gene expression signatures of resistance exercise in vivo.

Understanding the role of mechanical loading and exercise in skeletal muscle (SkM) is paramount for delineating the molecular mechanisms that govern changes in muscle mass. However, it is unknown whether loading of bioengineered SkM in vitro adequately recapitulates the molecular responses observed after resistance exercise (RE) in vivo. To address this, the transcriptional and epigenetic (DNA methylation) responses were compared after mechanical loading in bioengineered SkM in vitro and after RE in vivo. Specifically, genes known to be upregulated/hypomethylated after RE in humans were analyzed. Ninety-three percent of these genes demonstrated similar changes in gene expression post-loading in the bioengineered muscle when compared to acute RE in humans. Furthermore, similar differences in gene expression were observed between loaded bioengineered SkM and after programmed RT in rat SkM tissue. Hypomethylation occurred for only one of the genes analysed (GRIK2) post-loading in bioengineered SkM. To further validate these findings, DNA methylation and mRNA expression of known hypomethylated and upregulated genes post-acute RE in humans were also analyzed at 0.5, 3, and 24 h post-loading in bioengineered muscle. The largest changes in gene expression occurred at 3 h, whereby 82% and 91% of genes responded similarly when compared to human and rodent SkM respectively. DNA methylation of only a small proportion of genes analyzed (TRAF1, MSN, and CTTN) significantly increased post-loading in bioengineered SkM alone. Overall, mechanical loading of bioengineered SkM in vitro recapitulates the gene expression profile of human and rodent SkM after RE in vivo. Although some genes demonstrated differential DNA methylation post-loading in bioengineered SkM, such changes across the majority of genes analyzed did not closely mimic the epigenetic response to acute-RE in humans.

Mechanical loading of tissue engineered skeletal muscle prevents dexamethasone induced myotube atrophy.

Skeletal muscle atrophy as a consequence of acute and chronic illness, immobilisation, muscular dystrophies and aging, leads to severe muscle weakness, inactivity and increased mortality. Mechanical loading is thought to be the primary driver for skeletal muscle hypertrophy, however the extent to which mechanical loading can offset muscle catabolism has not been thoroughly explored. In vitro 3D-models of skeletal muscle provide a controllable, high throughput environment and mitigating many of the ethical and methodological constraints present during in vivo experimentation. This work aimed to determine if mechanical loading would offset dexamethasone (DEX) induced skeletal muscle atrophy, in muscle engineered using the C2C12 murine cell line. Mechanical loading successfully offset myotube atrophy and functional degeneration associated with DEX regardless of whether the loading occurred before or after 24 h of DEX treatment. Furthermore, mechanical load prevented increases in MuRF-1 and MAFbx mRNA expression, critical regulators of muscle atrophy. Overall, we demonstrate the application of tissue engineered muscle to study skeletal muscle health and disease, offering great potential for future use to better understand treatment modalities for skeletal muscle atrophy.

Characterising hyperinsulinemia-induced insulin resistance in human skeletal muscle cells.

Hyperinsulinaemia potentially contributes to insulin resistance in metabolic tissues, such as skeletal muscle. The purpose of these experiments was to characterise glucose uptake, insulin signalling and relevant gene expression in primary human skeletal muscle-derived cells (HMDCs), in response to prolonged insulin exposure (PIE) as a model of hyperinsulinaemia-induced insulin resistance. Differentiated HMDCs from healthy human donors were cultured with or without insulin (100 nM) for 3 days followed by an acute insulin stimulation. HMDCs exposed to PIE were characterised by impaired insulin-stimulated glucose uptake, blunted IRS-1 phosphorylation (Tyr612) and Akt (Ser473) phosphorylation in response to an acute insulin stimulation. Glucose transporter 1 (GLUT1), but not GLUT4, mRNA and protein increased following PIE. The mRNA expression of metabolic (PDK4) and inflammatory markers (TNF-α) was reduced by PIE but did not change lipid (SREBP1 and CD36) or mitochondrial (UCP3) markers. These experiments provide further characterisation of the effects of PIE as a model of hyperinsulinaemia-induced insulin resistance in HMDCs.

Development of a 3D Tissue-Engineered Skeletal Muscle and Bone Co-culture System.

In vitro 3D tissue-engineered (TE) structures have been shown to better represent in vivo tissue morphology and biochemical pathways than monolayer culture, and are less ethically questionable than animal models. However, to create systems with even greater relevance, multiple integrated tissue systems should be recreated in vitro. In the present study, the effects and conditions most suitable for the co-culture of TE skeletal muscle and bone are investigated. High-glucose Dulbecco's modified Eagle medium (HG-DMEM) supplemented with 20% fetal bovine serum followed by HG-DMEM with 2% horse serum is found to enable proliferation of both C2C12 muscle precursor cells and TE85 human osteosarcoma cells, fusion of C2C12s into myotubes, as well as an upregulation of RUNX2/CBFa1 in TE85s. Myotube formation is also evident within indirect contact monolayer cultures. Finally, in 3D co-cultures, TE85 collagen/hydroxyapatite constructs have significantly greater expression of RUNX2/CBFa1 and osteocalcin/BGLAP in the presence of collagen-based C2C12 skeletal muscle constructs; however, fusion within these constructs appears reduced. This work demonstrates the first report of the simultaneous co-culture and differentiation of 3D TE skeletal muscle and bone, and represents a significant step toward a full in vitro 3D musculoskeletal junction model.

Mechanical loading stimulates hypertrophy in tissue-engineered skeletal muscle: Molecular and phenotypic responses.

Mechanical loading of skeletal muscle results in molecular and phenotypic adaptations typified by enhanced muscle size. Studies on humans are limited by the need for repeated sampling, and studies on animals have methodological and ethical limitations. In this investigation, three-dimensional skeletal muscle was tissue-engineered utilizing the murine cell line C2C12, which bears resemblance to native tissue and benefits from the advantages of conventional in vitro experiments. The work aimed to determine if mechanical loading induced an anabolic hypertrophic response, akin to that described in vivo after mechanical loading in the form of resistance exercise. Specifically, we temporally investigated candidate gene expression and Akt-mechanistic target of rapamycin 1 signalling along with myotube growth and tissue function. Mechanical loading (construct length increase of 15%) significantly increased insulin-like growth factor-1 and MMP-2 messenger RNA expression 21 hr after overload, and the levels of the atrophic gene MAFbx were significantly downregulated 45 hr after mechanical overload. In addition, p70S6 kinase and 4EBP-1 phosphorylation were upregulated immediately after mechanical overload. Maximal contractile force was augmented 45 hr after load with a 265% increase in force, alongside significant hypertrophy of the myotubes within the engineered muscle. Overall, mechanical loading of tissue-engineered skeletal muscle induced hypertrophy and improved force production.

Development of tissue-engineered skeletal muscle manufacturing variables.

Three-dimensional tissue-engineered structures enable more representative determination of novel drug or material effects on tissue than traditional monolayer cell cultures. This study sought to better understand how key manufacturing variables affect the myotube characteristics of a skeletal muscle model toward reducing resource use and to develop an understanding of scaling on model consistency. C2C12 murine myoblasts were seeded in a tethered collagen scaffold from which directional myotubes form in response to lines of tension and a change in medium. Collagen polymerizing area length-to-width ratios greater than one were found to reduced cell-matrix attachment and remodeling forces significantly (p < .05) correlating to a reduction in cell fusion potential. Following this, utilizing a factorial design of experiment, 4 million C2C12s/ml, with a polymerizing area width 150% of the anchor point, produced the most favorable myotube characteristics and dramatically reduced the incidence of rupture. Scaled constructs showed no significant differences when compared to larger models. Approximately 20 myotubes with a variation in the alignment of <25° in the central region were consistently observed in the final models. This demonstrates the influence of initial manufacturing variables on tissue formation and has produced a benchmark model for consistent production across scaled constructs for future optimization and as a potential cost-effective preclinical testbed.

Scalable 3D Printed Molds for Human Tissue Engineered Skeletal Muscle.

Tissue engineered skeletal muscle allows investigation of the cellular and molecular mechanisms that regulate skeletal muscle pathology. The fabricated model must resemble characteristics of in vivo tissue and incorporate cost-effective and high content primary human tissue. Current models are limited by low throughput due to the complexities associated with recruiting tissue donors, donor specific variations, as well as cellular senescence associated with passaging. This research presents a method using fused deposition modeling (FDM) and laser sintering (LS) 3D printing to generate reproducible and scalable tissue engineered primary human muscle, possessing aligned mature myotubes reminiscent of in vivo tissue. Many existing models are bespoke causing variability when translated between laboratories. To this end, a scalable model has been developed (25-500 µL construct volumes) allowing fabrication of mature primary human skeletal muscle. This research provides a strategy to overcome limited biopsy cell numbers, enabling high throughput screening of functional human tissue.

The combined effect of sprint interval training and postexercise blood flow restriction on critical power, capillary growth, and mitochondrial proteins in trained cyclists.

Sprint interval training (SIT) combined with postexercise blood flow restriction (BFR) is a novel method to increase maximal oxygen uptake (V̇o2max) in trained individuals and also provides a potent acute stimulus for angiogenesis and mitochondrial biogenesis. The efficacy to enhance endurance performance, however, has yet to be demonstrated. Trained male cyclists ( n = 21) (V̇o2max: 62.8 ± 3.7 ml·min-1·kg-1) undertook 4 wk of SIT (repeated 30-s maximal sprints) either alone (CON; n = 10) or with postexercise BFR ( n = 11). Before and after training V̇o2max, critical power (CP) and curvature constant ( W') were determined and muscle biopsies obtained for determination of skeletal muscle capillarity and mitochondrial protein content. CP increased ( P = 0.001) by a similar extent following CON (287 ± 39 W to 297 ± 43 W) and BFR (296 ± 40 W to 306 ± 36 W). V̇o2max increased following BFR by 5.9% ( P = 0.02) but was unchanged after CON ( P = 0.56). All markers of skeletal muscle capillarity and mitochondrial protein content were unchanged following either training intervention. In conclusion, 4 wk of SIT increased CP; however, this was not enhanced further with BFR. SIT was not sufficient to elicit changes in skeletal muscle capillarity and mitochondrial protein content with or without BFR. However, we further demonstrate the potency of combining BFR with SIT to enhance V̇o2max in trained individuals. NEW & NOTEWORTHY This investigation has demonstrated that 4 wk of sprint interval training (SIT) increased critical power in trained individuals; however, postexercise blood flow restriction (BFR) did not enhance this further. SIT, with or without BFR, did not induce any changes in skeletal muscle capillarity or mitochondrial protein content in our trained population. We do, however, confirm previous findings that SIT combined with BFR is a potent stimulus to enhance maximal oxygen uptake.

Exercising Bioengineered Skeletal Muscle In Vitro: Biopsy to Bioreactor.

The bioengineering of skeletal muscle tissue in-vitro has enabled researchers to more closely mimic the in-vivo skeletal muscle niche. The three-dimensional (3-D) structure of the tissue engineered systems employed to date enable the generation of highly aligned and differentiated myofibers within a representative biological matrix. The use of electrical stimulation to model concentric contraction, via innervation of the myofibers, and the use of mechanical loading to model passive lengthening or stretch has begun to provide a manipulable environment to investigate the cellular and molecular responses following exercise mimicking stimuli in-vitro. Currently available bioreactor systems allow either electrical stimulation or mechanical loading to be utilized at any given time. In the present manuscript, we describe in detail the methodological procedures to create 3-D bioengineered skeletal muscle using both cell lines and/or primary human muscle derived cells from a tissue biopsy, through to modeling exercising stimuli using a bioreactor that can provide both electrical stimulation and mechanical loading simultaneously within the same in-vitro system.

Controlled Arrangement of Neuronal Cells on Surfaces Functionalized with Micropatterned Polymer Brushes.

Conventional in vitro cultures are useful to represent simplistic neuronal behavior; however, the lack of organization results in random neurite spreading. To overcome this problem, control over the directionality of SH-SY5Y cells was attained, utilizing photolithography to pattern the cell-repulsive anionic brush poly(potassium 3-sulfopropyl methacrylate) (PKSPMA) into tracks of 20, 40, 80, and 100 µm width. These data validate the use of PKSPMA brush coatings for a long-term culture of the SH-SY5Y cells, as well as providing a methodology by which the precise deposition of PKSPMA can be utilized to achieve a targeted control over the SH-SY5Y cells. Specifically, the PKSPMA brush patterns prevented cell attachment, allowing the SH-SY5Y cells to grow only on noncoated glass (gaps of 20, 50, 75, and 100 µm width) at different cell densities (5000, 10 000, and 15 000 cells/cm2). This research demonstrates the importance of achieving cell directionality in vitro, while these simplistic models could provide new platforms to study complex neuron-neuron interactions.

Resistance exercise stimulates mixed muscle protein synthesis in lean and obese young adults.

Obese individuals exhibit a diminished muscle protein synthesis response to nutrient stimulation when compared with their lean counterparts. However, the effect of obesity on exercise-stimulated muscle protein synthesis remains unknown. Nine lean (23.5 ± 0.6 kg/m2 ) and 8 obese (33.6 ± 1.2 kg/m2 ) physically active young adults participated in a study that determined muscle protein synthesis and intracellular signaling at rest and following an acute bout of resistance exercise. Mixed muscle protein synthesis was determined by combining stable isotope tracer ([13 C6 ]phenylalanine) infusion with serial biopsies of the vastus lateralis. A unilateral leg resistance exercise model was adopted so that resting and postexercise measurements of muscle protein synthesis could be obtained simultaneously. Obesity was associated with higher basal levels of serum insulin (P < 0.05), plasma triacylglycerol (P < 0.01), plasma cholesterol (P < 0.01), and plasma CRP (P < 0.01), as well as increased insulin resistance determined by HOMA-IR (P < 0.05). However, resting and postexercise rates of muscle protein synthesis were not significantly different between lean and obese participants (P = 0.644). Furthermore, resistance exercise stimulated muscle protein synthesis (~50% increase) in both groups (P < 0.001), with no difference between lean and obese (P = 0.809). Temporal increases in the phosphorylation of intracellular signaling proteins (AKT/4EBP1/p70S6K) were observed within the exercised leg (P < 0.05), with no differences between lean and obese. These findings suggest a normal anabolic response to muscle loading in obese young adults.

An Assessment of Myotube Morphology, Matrix Deformation, and Myogenic mRNA Expression in Custom-Built and Commercially Available Engineered Muscle Chamber Configurations.

There are several three-dimensional (3D) skeletal muscle (SkM) tissue engineered models reported in the literature. 3D SkM tissue engineering (TE) aims to recapitulate the structure and function of native (in vivo) tissue, within an in vitro environment. This requires the differentiation of myoblasts into aligned multinucleated myotubes surrounded by a biologically representative extracellular matrix (ECM). In the present work, a new commercially available 3D SkM TE culture chamber manufactured from polyether ether ketone (PEEK) that facilitates suitable development of these myotubes is presented. To assess the outcomes of the myotubes within these constructs, morphological, gene expression, and ECM remodeling parameters were compared against a previously published custom-built model. No significant differences were observed in the morphological and gene expression measures between the newly introduced and the established construct configuration, suggesting biological reproducibility irrespective of manufacturing process. However, TE SkM fabricated using the commercially available PEEK chambers displayed reduced variability in both construct attachment and matrix deformation, likely due to increased reproducibility within the manufacturing process. The mechanical differences between systems may also have contributed to such differences, however, investigation of these variables was beyond the scope of the investigation. Though more expensive than the custom-built models, these PEEK chambers are also suitable for multiple use after autoclaving. As such this would support its use over the previously published handmade culture chamber system, particularly when seeking to develop higher-throughput systems or when experimental cost is not a factor.

Critical power is positively related to skeletal muscle capillarity and type I muscle fibers in endurance-trained individuals.

The asymptote [critical power (CP)] and curvature constant ( W') of the hyperbolic power-duration relationship can predict performance within the severe-intensity exercise domain. However, the extent to which these parameters relate to skeletal muscle morphology is less clear, particularly in endurance-trained individuals, who, relative to their lesser-trained counterparts, possess skeletal muscles that can support high levels of oxygen transport and oxidative capacity, i.e., elevated type I fiber proportion and cross-sectional area (CSA) and capillarity. Fourteen endurance-trained men performed a maximal incremental test to determine peak oxygen uptake (V̇o2peak; 63.2 ± 4.1 ml·min-1·kg-1, mean ± SD) and maximal aerobic power (406 ± 63 W) and three to five constant-load tests to task failure for the determination of CP (303 ± 52 W) and W' (17.0 ± 3.0 kJ). Skeletal muscle biopsies were obtained from the vastus lateralis and analyzed for percent proportion of fiber types, CSA, and indexes of capillarity. CP was positively correlated with the percent proportion ( r = 0.79; P = 0.001) and CSA ( r = 0.73; P = 0.003) of type I fibers, capillary-to-fiber ratio ( r = 0.88; P < 0.001), and capillary contacts around type I fibers ( r = 0.94; P < 0.001) and type II fibers ( r = 0.68; P = 0.008). W' was not correlated with any morphological variables. These data reveal a strong positive association between CP and skeletal muscle capillarity. Our findings support the assertion that CP is an important parameter of aerobic function and offer novel insights into the physiological bases of CP. NEW & NOTEWORTHY This investigation demonstrated very strong positive correlations between critical power and skeletal muscle capillarity, particularly around type I fibers, and type I fiber composition. These correlations were demonstrated in endurance-trained individuals expected to possess well-adapted skeletal muscles, such as high levels of oxygen transport structures and high oxidative capacities, supporting the view that critical power is an important parameter of aerobic function. In contrast, the curvature constant W' was not associated with fiber type composition or capillarity.

Resolvin E1 (Rv E1 ) attenuates LPS induced inflammation and subsequent atrophy in C2C12 myotubes.

Resolution of inflammation is now known to be an active process which in part is instigated and controlled by specialized pro-resolving lipid mediators (SPM's) derived from dietary omega-3 fatty acids. Resolvin E1 (Rv E1 ) is one of these SPM's derived from the omega-3 fatty acid eicosapentaenoic acid. Using both molecular and phenotypic functional measures we report that in a model of Lipopolysaccharide (LPS) induced inflammation, Rv E1 attenuated mRNA levels of both interlukin-6 and monocyte chemoattractant protein-1 whilst having no effect on tumor necrosis factor-α or interlukin-1ß in C2C12 skeletal muscle myotubes. Findings at the molecular level were transferred into similar changes in extracellular protein levels of the corresponding genes with the greatest attenuation being noted in IL-6 protein concentrations. Rv E1 instigated beneficial morphological changes through the prevention of LPS induced skeletal muscle atrophy, in tandem with attenuation of the LPS induced reduction in contractile force in tissue engineered skeletal muscle. These findings demonstrate, in our model of endotoxin induced inflammation in skeletal muscle, that Rv E1 has pro-resolving properties in this cell type. Our data provides rationale for further investigation into the mechanistic action of Rv E1 in skeletal muscle, with the vision of having potential benefits for the prevention/resolution of in-vivo skeletal muscle atrophy.