The multifaceted role of proteases and modern analytical methods for investigation of their catalytic activity.

We discuss the diverse functions of proteases in the context of their biotechnological and medical significance, as well as analytical approaches used to determine the functional activity of these enzymes. An insight into modern approaches to studying the kinetics and specificity of proteases, based on spectral (absorption, fluorescence), mass spectrometric, immunological, calorimetric, and electrochemical methods of analysis is given. We also examine in detail electrochemical systems for determining the activity and specificity of proteases. Particular attention is given to exploring innovative electrochemical systems based on the detection of the electrochemical oxidation signal of amino acid residues, thereby eliminating the need for extra redox labels in the process of peptide synthesis. In the review, we highlight the main prospects for the further development of electrochemical systems for the study of biotechnologically and medically significant proteases, which will enable the miniaturization of the analytical process for determining the catalytic activity of these enzymes.

Bielectrode Strategy for Determination of CYP2E1 Catalytic Activity: Electrodes with Bactosomes and Voltammetric Determination of 6-Hydroxychlorzoxazone.

We describe a bielectrode system for evaluation of the electrocatalytic activity of cytochrome P450 2E1 (CYP2E1) towards chlorzoxazone. One electrode of the system was employed to immobilize Bactosomes with human CYP2E1, cytochrome P450 reductase (CPR), and cytochrome b5 (cyt b5). The second electrode was used to quantify CYP2E1-produced 6-hydroxychlorzoxazone by its direct electrochemical oxidation, registered using square-wave voltammetry. Using this system, we determined the steady-state kinetic parameters of chlorzoxazone hydroxylation by CYP2E1 of Bactosomes immobilized on the electrode: the maximal reaction rate (Vmax) was 1.64 ± 0.08 min-1, and the Michaelis constant (KM) was 78 ± 9 µM. We studied the electrochemical characteristics of immobilized Bactosomes and have revealed that electron transfer from the electrode occurs both to the flavin prosthetic groups of CPR and the heme iron ions of CYP2E1 and cyt b5. Additionally, it has been demonstrated that CPR has the capacity to activate CYP2E1 electrocatalytic activity towards chlorzoxazone, likely through intermolecular electron transfer from the electrochemically reduced form of CPR to the CYP2E1 heme iron ion.

Electrochemical biosensor for trypsin activity assay based on cleavage of immobilized tyrosine-containing peptide.

In this work, we proposed a biosensor for trypsin proteolytic activity assay using immobilization of model peptides on screen-printed electrodes (SPE) modified with gold nanoparticles (AuNPs) prepared by electrosynthetic method. Sensing of proteolytic activity was based on electrochemical oxidation of tyrosine residues of peptides. We designed peptides containing N-terminal cysteine residue for immobilization on an SPE, modified with gold nanoparticles, trypsin-specific cleavage site and tyrosine residue as a redox label. The peptides were immobilized on SPE by formation of chemical bonds between mercapto groups of the N-terminal cysteine residues and AuNPs. After the incubation with trypsin, time-dependent cleavage of the immobilized peptides was observed by decline in tyrosine electrochemical oxidation signal. The kinetic parameters of trypsin, such as the catalytic constant (kcat), the Michaelis constant (KM) and the catalytic efficiency (kcat/KM), toward the CGGGRYR peptide were determined as 0.33 ± 0.01 min-1, 198 ± 24 nM and 0.0016 min-1 nM-1, respectively. Using the developed biosensor, we demonstrated the possibility of analysis of trypsin specificity toward the peptides with amino acid residues disrupting proteolysis. Further, we designed the peptides with proline or glutamic acid residues after the cleavage site (CGGRPYR and CGGREYR), and trypsin had reduced activity toward both of them according to the existing knowledge of the enzyme specificity. The developed biosensor system allows one to perform a comparative analysis of the protease steady-state kinetic parameters and specificity toward model peptides with different amino acid sequences.

Biotransformation of phenytoin in the electrochemically-driven CYP2C19 system.

The possibility of the detection of atypical kinetic profiles of drug biotransformation using electrochemical systems based on immobilized cytochromes P450 with phenytoin hydroxylation by cytochrome P450 2C19 (CYP2C19) as an example was evaluated for the first time. For this purpose, we developed an electrochemical system, where one of the electrodes was modified by didodecyldimethylammonium bromide (DDAB) and was used as an electron donor for reduction of heme iron ion of the immobilized CYP2C19 and initiation of the catalytic reaction, while the second electrode was not modified and served for an electrochemical quantitation of 4-hydroxyphenytoin, which is a metabolite of antiepileptic drug phenytoin, by its oxidation peak. It was revealed that the dependence of the rate of 4-hydroxyphenytoin formation on phenytoin concentration is described by the equation for two enzymes or two binding sites indicating the existing of high- and low-affinity forms of the enzyme. The atypical kinetics and the kinetic parameters of CYP2C19-mediated phenytoin hydroxylation in the electrochemical system correlate to the same characteristics obtained by other authors in an alternative enzymatic system. Our results demonstrate the possibility of electrochemical systems based on cytochromes P450 to be applied for the detection of atypical kinetic profiles of drug metabolism.

Electrochemical characterization of mutant forms of rubredoxin B from Mycobacterium tuberculosis.

Electron transfer in metalloproteins is a driving force for many biological processes and widely distributed in nature. Rubredoxin B (RubB) from Mycobacterium tuberculosis is a first example among [1Fe-0S] proteins that support catalytic activity of terminal sterol-monooxygenases enabling its application in metabolic engineering. To explore the tolerance of RubB to the specific amino acid changes we evaluated the effect of surface mutations on its electrochemical properties. Based on the RubB fold we also designed the mutant with a putative additional site for protein-protein interactions to further evaluate electron transfer and electrochemical properties. The investigation of redox properties of mutant variants of RubB was done using screen-printed graphite electrodes (SPEs) modified with stable dispersion of multi-walled carbon nanotubes (MWCNTs). The redox potentials (midpoint potentials, E0Ꞌ) of mutants did not significantly differ from the wild type protein and vary in the range of -264 to -231 mV vs. Ag/AgCl electrode. However, all mutations affect electron transfer rate between the protein and electrode. Notably, the modulation of the protein-protein interactions was observed for the insertion mutant suggesting the possibility of tailoring of rubredoxin for the selected redox-partner. Overall, RubB is tolerant to the significant modifications in its structure enabling rational engineering of novel redox proteins.

Electroanalysis of Biomolecules: Rational Selection of Sensor Construction.

Methods of electrochemical analysis of biological objects based on the reaction of electro-oxidation/electro-reduction of molecules are presented. Polymer nanocomposite materials that modify electrodes to increase sensitivity of electrochemical events on the surface of electrodes are described. Examples of applications electrochemical biosensors constructed with nanocomposite material for detection of biological molecules are presented, advantages and drawbacks of different applications are discussed.

A new twist of rubredoxin function in M. tuberculosis.

Electron transfer mediated by metalloproteins drives many biological processes. Rubredoxins are a ubiquitous [1Fe-0S] class of electron carriers that play an important role in bacterial adaptation to changing environmental conditions. In Mycobacterium tuberculosis, oxidative and acidic stresses as well as iron starvation induce rubredoxins expression. However, their functions during M. tuberculosis infection are unknown. In the present work, we show that rubredoxin B (RubB) is able to efficiently shuttle electrons from cognate reductases, FprA and FdR to support catalytic activity of cytochrome P450s, CYP124, CYP125, and CYP142, which are important for bacterial viability and pathogenicity. We solved the crystal structure of RubB and characterized the interaction between RubB and CYPs using site-directed mutagenesis. Mutations that not only neutralize single charge but also change the specific residues on the surface of RubB did not dramatically decrease activity of studied CYPs. Together with isothermal calorimetry (ITC) experiments, the obtained results suggest that interactions are transient and not highly specific. The redox potential of RubB is -264 mV vs. Ag/AgCl and the measured extinction coefficients are 9931 M-1cm-1 and 8371 M-1cm-1 at 380 nm and 490 nm, respectively. Characteristic parameters of RubB along with the discovered function might be useful for biotechnological applications. Our findings suggest that a switch from ferredoxins to rubredoxins might be crucial for M. tuberculosis to support CYPs activity during the infection.

Electrochemical studies of the interaction of rifampicin and nanosome/rifampicin with dsDNA.

The interactions of dsDNA with rifampicin (RF) or with rifampicin after encapsulation in phospholipid micelles (nanosome/rifampicin) (NRF) were studied electrochemically. Screen-printed electrodes (SPEs) modified by stable dispersions of multi-wolled carbon nanotubes (MWCNTs) in aqueous solution of poly(1,2-butadiene)-block-poly(2-(dimethylamino)ethyl methacrylate) (PB290-b-PDMAEMA240) diblock copolymer were used for quantitative electrochemical investigation of direct electrochemical oxidation of guanine at E = 0.591 V (vs. Ag/AgCl) and adenine at E = 0.874 V (vs. Ag/AgCl) of dsDNA and its change in the presence of RF or NRF. Due to RF or NRF interaction with dsDNA, the differential pulse voltammetry (DPV) peak currents of guanine and adenine decreased and the peak potentials shifted to more positive values with increasing drug concentration (RF or NRF). Binding constants (Kb) of complexes RF-dsDNA and NRF-dsDNA were calculated based on adenine and guanine oxidation signals. The Kb values for RF-dsDNA were 1.48 × 104 M-1/8.56 × 104 M-1, while for NRF-dsDNA were 2.51 × 104 M-1/1.78 × 103 M-1 (based on adenine or guanine oxidation signals, respectively). The values of Kb revealed intercalation mode of interaction with dsDNA for RF and mixed type of interaction (intercalation and electrostatic mode) for NRF. The estimated values of ΔG (Gibbs free energy) of the complex formation confirmed that drug-dsDNA interactions are spontaneous and favourable reactions.

Interactions of galeterone and its 3-keto-Δ4 metabolite (D4G) with one of the key enzymes of corticosteroid biosynthesis - steroid 21-monooxygenase (CYP21A2).

We have investigated interactions of galeterone and its pharmacologically active metabolite - 3-keto-Δ4-galeterone (D4G) - with one of the key enzymes of corticosteroid biosynthesis - steroid 21-monooxygenase (CYP21A2). It was shown by absorption spectroscopy that both compounds induce type I spectral changes of CYP21A2. Spectral dissociation constants (KS ) of complexes of CYP21A2 with galeterone or D4G were calculated as 3.1 ± 0.7 µm and 4.6 ± 0.4 µm, respectively. It was predicted by molecular docking that both ligands similarly bind to the active site of CYP21A2. We have revealed using reconstituted monooxygenase system that galeterone is a competitive inhibitor of CYP21A2 with the inhibition constant (Ki ) value of 12 ± 3 µm, while D4G at the concentrations of 10 and 25 µm does not inhibit the enzyme. Summarizing, based on the in vitro analyses we detected inhibition of CYP21A2 by galeterone and lack of the influence of D4G on this enzyme.

Rational Design of Amphiphilic Diblock Copolymer/MWCNT Surface Modifiers and Their Application for Direct Electrochemical Sensing of DNA.

We demonstrate the application of amphiphilic ionic poly(n-butylmethacrylate)-block- poly(2-(dimethylamino)ethyl methacrylate) diblock copolymers (PnBMA40-b-PDMAEMA40, PnBMA40-b-PDMAEMA120, PnBMA70-b-PDMAEMA120) for dispersing multiwalled carbon nanotubes (MWCNTs) in aqueous media, a subsequent efficient surface modification of screen-printed electrodes (SPEs), and the application of the modified SPEs for DNA electrochemistry. Stable and fine aqueous dispersions of MWCNTs were obtained with PnBMAx-b-PDMAEMAy diblock copolymers, regardless of the structure of the copolymer and the amount of MWCNTs in the dispersions. The effect of the diblock copolymer structure was important when the dispersions of MWCNTs were deposited as modifying layers on surfaces of SPEs, resulting in considerable increases of the electroactive surface areas and great acceleration of the electron transfer rate. The SPE/(PnBMAx-b-PDMAEMAy + MWCNT) constructs were further exploited for direct electrochemical oxidation of the guanine (G) and adenine (A) residues in a model salmon sperm double-stranded DNA (dsDNA). Two well-defined irreversible oxidation peaks were observed at about +600 and +900 mV, corresponding to the electrochemical oxidation of G and A residues, respectively. A multi-parametric optimization of dsDNA electrochemistry enables one to get the limits of detection (LOD) as low as 5 µg/mL (0.25 µM) and 1 µg/mL (0.05 µM) for G and A residues, respectively. The achieved sensitivity of DNA assay enables quantification of the A and G residues of dsDNA in the presence of human serum and DNA in isolated human leukocytes.

The interactions of a number of steroid-metabolizing cytochromes P450 with abiraterone D4A metabolite: spectral analysis and molecular docking.

The interactions of pharmacologically active 3-keto-Δ4-metabolite of anticancer drug abiraterone (D4A) with steroid-metabolizing cytochromes P450 (CYP51A1, CYP11A1, CYP19A1) was studied by absorption spectroscopy and molecular docking. Both abiraterone and D4A induce type I spectral changes of CYP51A1, one of the enzymes of cholesterol biosynthesis. We have revealed that D4A did not induce spectral changes of CYP11A1, the key enzyme of pregnenolone biosynthesis, unlike abiraterone (type II ligand of CYP11A1). On the contrary, D4A interacts with the active site of CYP19A1, the key enzyme of estrogen biosynthesis, inducing type II spectral changes, while abiraterone does not. Spectral analysis allowed us to calculate spectral dissociation constant (KS) for each complex of cytochrome P450 with respective ligands. The data were supported by molecular docking. The obtained results broaden understanding of interactions of D4A with some of the key steroid-metabolizing cytochromes P450 and allow one to predict possible disproportions of steroid metabolism.

In vitro interactions of abiraterone, erythromycin, and CYP3A4: implications for drug-drug interactions.

Potential drug-drug interactions of the antitumor drug abiraterone and the macrolide antibiotic erythromycin were studied at the stage of cytochrome P450 3A4 (CYP3A4) biotransformation. Using differential spectroscopy, we have shown that abiraterone is a type II ligand of CYP3A4. The dependence of CYP3A4 spectral changes on the concentration of abiraterone is sigmoidal, which indicates cooperative interactions of CYP3A4 with abiraterone; these interactions were confirmed by molecular docking. The dissociation constant (Kd ) and Hill coefficient (h) values for the CYP3A4-abiraterone complex were calculated as 3.8 ± 0.1 µM and 2.3 ± 0.2, respectively. An electrochemical enzymatic system based on CYP3A4 immobilized on a screen-printed electrode was used to show that abiraterone acts as a competitive inhibitor toward erythromycin N-demethylase activity of CYP3A4 (apparent Ki  = 8.1 ± 1.2 µM), while erythromycin and its products of enzymatic metabolism do not affect abiraterone N-oxidation by CYP3A4. In conclusion, the inhibition properties of abiraterone toward CYP3A4-dependent N-demethylation of erythromycin and the biologically inert behavior of erythromycin toward abiraterone hydroxylation were demonstrated.

Estimation of the inhibiting impact of abiraterone D4A metabolite on human steroid 21-monooxygenase (CYP21A2).

Abiraterone D4A metabolite, the product of 3ß-hydroxysteroid dehydrogenase activity toward abiraterone, may serve as a potential antitumor agent for the treatment of prostate cancer. The main adverse effect of abiraterone is the disruption of corticosteroid biosynthesis, and the more pharmacologically active abiraterone D4A metabolite may have the same issues. We therefore estimated the inhibiting impact of the abiraterone D4A metabolite on one of the key corticosteroidogenic enzymes - human steroid 21-monooxygenase (CYP21A2). Molecular docking of D4A into the active site of CYP21A2 has been predicted to be similar to abiraterone binding with the enzyme. Abiraterone D4A metabolite, similar to abiraterone, induces type II spectral changes of CYP21A2. The spectral dissociation constant for the abiraterone D4A metabolite-CYP21A2 complex was calculated as 3.4 ±â€¯0.5 µM. Abiraterone D4A metabolite demonstrates competitive/mixed type CYP21A2 inhibition with an inhibitory constant of 1.8 ±â€¯0.8 µM, as obtained by Dixon plot. These results make it possible to predict the adverse effects of the new perspective candidate compound for antitumor therapy.

Assessment of electrocatalytic hydroxylase activity of cytochrome P450 3A4 (CYP3A4) by means of derivatization of 6ß-hydroxycortisol by sulfuric acid for fluorimetric assay.

We used rapid one-step derivatization of 6ß-hydroxylated hydrocortisone by sulfuric acid for fluorimetric determination of CYP3A4-dependent hydroxylase reaction in the electrochemical system. We have shown that CYP3A4 substrate - hydrocortisone - and its 6ß-hydroxylated product have different emission wavelengths at an excitation λex = 365 nm after treatment with sulfuric acid:ethanol (3:1) mixture (λem = 525 ±â€¯2 nm and λem = 427 ±â€¯2 nm, respectively). The detection limit for 6ß-hydroxycortisol was estimated to be 0.32 µM (corresponding to 0.095 nmol in 300 µL sample) (S/N = 3). Using the fluorimetric method of 6ß-hydroxycortisol detection following the electrolysis of hydrocortisone with CYP3A4 immobilized on a screen-printed graphite electrode modified by didodecyldimethylammonium bromide we have calculated the steady-state kinetic parameters of CYP3A4 for hydrocortisone: the maximal rate of the reaction (Vmax) as 89 ±â€¯5 pmol of product per min per pmol of electroactive enzyme and the Michaelis constant (KM) as 10 ±â€¯2 µM. In our system, ketoconazole inhibited hydroxylase activity of CYP3A4 towards hydrocortisone with the IC50 value of 70 ±â€¯5 nM. The approach proposed for determination of the CYP3A4 electrocatalytic activity can be used for throughput screening of different modulators of this cytochrome P450 isozyme during drug development.

From electrochemistry to enzyme kinetics of cytochrome P450.

This review is an attempt to describe advancements in the electrochemistry of cytochrome P450 enzymes (EC 1.14.14.1) and to study molecular aspects and catalytic behavior of enzymatic electrocatalysis. Electroanalysis of cytochrome P450 demonstrates how to translate theoretical laws and equations of classical electrochemistry for the calculation of the kinetic parameters of enzymatic reactions and then translation of kinetic parameters to interpretation of drug-drug interactions. The functional significance of cytochrome P450s (CYPs) includes the metabolism of drugs, foreign chemicals, and endogenic compounds. The pharmaceutical industry needs sensitive and cost-effective systems for screening new drugs and investigation of drug-drug interactions. The development of different types of CYP-based biosensors is now in great demand. This review also highlights the characteristics of electrode processes and electrode properties for optimization of the cytochrome P450 electroanalysis. Electrochemical cytochrome P450-biosensors are the most studied. In this review, we analyzed electrode/cytochrome P450 systems in terms of the mechanisms underlying P450-catalyzed reactions. Screening of potential substrates or inhibitors of cytochromes P450 by means of electrodes were described.

Analysis of L-tyrosine based on electrocatalytic oxidative reactions via screen-printed electrodes modified with multi-walled carbon nanotubes and nanosized titanium oxide (TiO2).

Method for electrochemical determination of L-tyrosine with screen-printed electrodes (SPE) modified with multi-walled CNT or CNT/TiO2 as sensing elements was used for the electroanalysis of L-tyrosine (Tyr). It was demonstrated that SPE/CNT and SPE/CNT/TiO2 exhibited high electrocatalytic activity and good analytical performance towards oxidation of L-tyrosine. The linear range of Tyr in human serum was 0.025 ÷ 1 mM with the correlation coefficient R2 = 0.97. Direct electrochemistry (without any mediator) of co-factor-free bovine serum albumin (BSA) and human serum albumin (HSA) was investigated by use of modified electrodes. Protein-ligand interactions based on the electrocatalytic oxidation of L-tyrosine during HSA interaction with hemin were analyzed by the change of peak height and oxidation peak area, corresponding to tyrosine oxidation accessibility.

Interaction of 17α-hydroxylase, 17(20)-lyase (CYP17A1) inhibitors - abiraterone and galeterone - with human sterol 14α-demethylase (CYP51A1).

Abiraterone and galeterone induce type I differential spectral changes in human sterol 14α-demethylase (cytochrome P450 51A1, CYP51A1) with the sigmoidal shape of the binding curve. After approximation of the data by Hill model, the half-saturation concentrations (K0.5) were estimated as 22 ±â€¯1 µM and 16 ±â€¯1 µM and the Hill coefficients as 2.4 ±â€¯0.2 and 1.97 ±â€¯0.23 for abiraterone and galeterone, respectively. We analyzed the catalytic activity of CYP51A1 towards abiraterone and galeterone using an electrochemical system based on recombinant CYP51A1 immobilized on the screen-printed graphite electrode (SPE) modified by didodecyldimethylammonium bromide (DDAB) film. The study revealed the amperometric response of CYP51A1 upon addition of abiraterone, which may indicate the substrate properties of abiraterone towards CYP51A1. Galeterone caused negligible amperometric response of CYP51A1. Mass-spectrometric analysis of the products of CYP51A1-dependent electrocatalytic reaction at a controlled potential towards abiraterone and galeterone revealed products with m/z of 366.3 and 405.2, respectively, indicating monohydroxylation of abiraterone and galeterone. We have observed the sigmoidal character of the dependence of the catalytic current on abiraterone concentration. Analysis of molecular docking data demonstrated the ability of abiraterone and galeterone to bind to the active site of CYP51A1, but abiraterone occupies the position closer to the heme.

Oxazolinyl derivatives of [17(20)E]-21-norpregnene differing in the structure of A and B rings. Facile synthesis and inhibition of CYP17A1 catalytic activity.

Five 4,5-dihydro-1,3-oxazole derivatives of [17(20)E]-21-norpregnene, comprising 3ß-hydroxy-5-ene (1), 3,6-dioxo-4-ene (2), 3-oxo-4-ene (3), 3α,5α-cyclo-6-oxo (4), 3ß-hydroxy-6-oxo (5) fragments were synthesized. Synthesis was conducted with improved procedure, based on reaction of suitably protected [17(20)E]-pregnen-21-oic acids with ethanolamine in presence of triphenyl phosphine, carbon tetrachloride, and triethyl amine. Potency of the compounds 1-5 to inhibit 17α-hydroxylase/17,20-lyase (CYP17A1) activity was studied by highly sensitive electrochemical method, using the enzyme immobilization technique. Compounds 1 and 3 were found to be potent CYP17A1 inhibitors, compounds 2 and 5 were not active, compound 4 strongly and irreversibly suppressed the enzyme activity. Molecular docking of compounds 1-5 in the active site of CYP17A1 showed that positions of all compounds in the enzyme active site were similar.

Scrutiny of electrochemically-driven electrocatalysis of C-19 steroid 1α-hydroxylase (CYP260A1) from Sorangium cellulosum So ce56.

Direct electrochemistry and bioelectrocatalysis of a newly discovered C-19 steroid 1α-hydroxylase (CYP260A1) from the myxobacterium Sorangium cellulosum So ce56 were investigated. CYP260A1 was immobilized on screen-printed graphite electrodes (SPE) modified with gold nanoparticles, stabilized by didodecyldimethylammonium bromide (SPE/DDAB/Au). Cyclic voltammograms in argon-saturated substrate free 0.1 M potassium phosphate buffer, pH 7.4, and in enzyme-substrate complex with androstenedione demonstrated a redox processes with a single redox couple of E(0') of -299 ± 16 mV and -297.5 ± 21 mV (vs. Ag/AgCl), respectively. CYP260A1 exhibited an electrocatalytic activity detected by an increase of the reduction current in the presence of dissolved oxygen and upon addition of the substrate (androstenedione) in the air-saturated buffer. The catalytic current of the enzyme correlated with substrate concentration in the electrochemical system and this dependence can be described by electrochemical Michaelis-Menten model. The products of CYP260A1-depended electrolysis at controlled working electrode potential of androstenedione were analyzed by mass-spectrometry. MS analysis revealed a mono-hydroxylated product of CYP260A1-dependent electrocatalytic reaction towards androstenedione.