Enhancing CO2 Capture via Metal-Ligand Cooperativity: Tuning Ligand Basicity and Zn(II) Lewis Acidity.

A series of thiosemicarbazonato-hydrazinatopyridine zinc(II) complexes were evaluated as direct air CO2 capture agents. The complexes sequester CO2 in a methanol solution as a metal-coordinated methylcarbonate. The reaction is reversible upon sparging of solutions with an inert gas (N2 or Ar). The capture process involves metal-ligand cooperativity with the noncoordinating nitrogen of the hydrazinatopyridine functional group serving as a Brønsted-Lowry base and the zinc acting as a Lewis acid. In this study, the pendent amine of the thiosemicarbazonato group was varied to include 4-phenyl (ZnL5), 4-(trifluoromethyl)phenyl (ZnL6), 4-cyanophenyl (ZnL7), 4-tolyl (ZnL8), and 4-naphthyl (ZnL9). Hyperconjugation between the pendent group and the ligand core resulted in modulation of the metal ion acidity, as quantified by ligand exchange equilibrium constants (K3 = 193-511) and ligand basicity (pKa,MeOH = 11.09-11.94). Variations in electronic structure that decreased ligand basicity were more than offset by increases in Lewis acidity. The equilibrium constant (K1) for CO2 capture varied from 46300 to 73700. Overall, the value of K1 was directly related to the relative Lewis acidity of the complexes (K3). Notably, there was an overall inverse relationship between K1 and the ligand basicity. The results provide insights into ligand design to further improve CO2 capture.

Physical structure of constitutional isomers influences antiproliferation activity of thiosemicarbazone-alkylthiocarbamate copper complexes.

A series of hybrid thiosemicarbazone-alkylthiocarbamate copper complexes with similar electronic environments but distinct physical structures have been prepared, characterized, and evaluated for antiproliferation activity. The complexes include the constitutional isomers (1-phenylpropane-1-imine-(O-ethylthiocarbamato)-2-one-(N-methylthiosemicarbazonato))copper(II) (CuL1) and (1-phenylpropane-1-one-(N-methylthiosemicarbazonato)-2-imine-(O-ethylthiocarbamato))copper(II) (CuL2) along with (1-propane-1-imine-(O-ethylthiocarbamato)-2-one-(N-methylthiosemicarbazonato))copper(II) (CuL3). Complexes CuL1 and CuL2 differ in the positions of the pendent thiosemicarbazone (TSC) and alkylthiocarbamate (ATC) moieties on the 1-phenylpropane backbone. Complex CuL3 employs a propane backbone with the TSC in the 2-position as in CuL1. The isomer pair CuL1 and CuL2 have equivalent electronic environments with indistinguishable CuII/I potentials (E1/2 = -0.86 V vs. ferrocenium/ferrocene) and electron paramagnetic resonance (EPR) spectra (g∥ = 2.26, g⊥ = 2.08). The electronic structure of CuL3 has a similar E1/2 of -0.84 V and identical EPR parameters to CuL1, 2. Single crystal X-ray diffraction studies confirm a consistent donor environment with no substantial variation in the CuN or CuS bond distances and angles between the complexes. The antiproliferation activities of the CuL1-3 were evaluated against the lung adenocarcinoma cell line (A549) and nonmalignant lung fibroblast cell line (IMR-90) using the MTT assay. CuL1 had the highest A549 activity (A549EC50 = 0.065 µM) and selectivity (IMR-90EC50/A549EC50 = 20). The constitutional isomer CuL2 displayed decreased A549 activity (0.18 µM) and selectivity (10.6). The complex CuL3 displayed activity (0.009 µM) similar to CuL1 but with a lack of selectivity (1.0). Cellular copper loading determined by ICP-MS was consistent with the activity and selectivity trends. The complexes CuL1-3 did not induce reactive oxygen species (ROS) generation.

Metal-Ligand Cooperativity Promotes Reversible Capture of Dilute CO2 as a Zn(II)-Methylcarbonate.

In this study, a series of thiosemicarbazonato-hydrazinatopyridine metal complexes were evaluated as CO2 capture agents. The complexes incorporate a non-coordinating, basic hydrazinatopyridine nitrogen in close proximity to a Lewis acidic metal ion allowing for metal-ligand cooperativity. The coordination of various metal ions with (diacetyl-2-(4-methyl-thiosemicarbazone)-3-(2-hydrazinopyridine) (H2L1) yielded ML1 (M = Ni(II), Pd(II)), ML1(CH3OH) (M = Cu(II), Zn(II)), and [ML1(PPh3)2]BF4 (M = Co(III)) complexes. The ML1(CH3OH) complexes reversibly capture CO2 with equilibrium constants of 88 ± 9 and 6900 ± 180 for Cu(II) and Zn(II), respectively. Ligand effects were evaluated with Zn(II) through variation of the 4-methyl-thiosemicarbazone with 4-ethyl (H2L2), 4-phenethyl (H2L3), and 4-benzyl (H2L4) derivatives. The equilibrium constant for CO2 capture increased to 11,700 ± 300, 15,000 ± 400, and 35,000 ± 200 for ZnL2(MeOH), ZnL3(MeOH), and ZnL4(MeOH), respectively. Quantification of ligand basicity and metal ion Lewis acidity shows that changes in CO2 capture affinity are largely associated with ligand basicity upon substitution of Cu(II) with Zn(II), while variation of the thiosemicarbazone ligand enhances CO2 affinity by tuning the metal ion Lewis acidity. Overall, the Zn(II) complexes effectively capture CO2 from dilute sources with up to 90%, 86%, and 65% CO2 capture efficiency from 400, 1000, and 2500 ppm CO2 streams.

Ligand and Linkage Isomers of Bis(ethylthiocarbamato) Copper Complexes with Cyclic C6H8 Backbone Substituents: Synthesis, Characterization, and Antiproliferation Activity.

A series of isomeric bis(alkylthiocarbamate) copper complexes have been synthesized, characterized, and evaluated for antiproliferation activity. The complexes were derived from ligand isomers with 3-methylpentyl (H2L2) and cyclohexyl (H2L3) backbone substituents, which each yield a pair of linkage isomers. The thermodynamic products CuL2a/3a have two imino N and two S donors resulting in three five-member chelate rings (555 isomers). The kinetic isomers CuL2b/3b have one imino and one hydrazino N donor and two S donors resulting in four-, six-, and five-member rings (465 isomers). The 555 isomers have more accessible CuII/I potentials (E1/2 = -811/-768 mV vs. ferrocenium/ferrocene) and lower energy charge transfer bands than their 465 counterparts (E1/2 = -923/-854 mV). Antiproliferation activities were evaluated against the lung adenocarcinoma cell line (A549) and nonmalignant lung fibroblast cell line (IMR-90) using the MTT assay. CuL2a was potent (A549EC50 = 0.080 µM) and selective (IMR-90EC50/A549EC50 = 25) for A549. Its linkage isomer CuL2b had equivalent A549 activity, but lower selectivity (IMR-90EC50/A549EC50 = 12.5). The isomers CuL3a and CuL3b were less potent with A549EC50 values of 1.9 and 0.19 µM and less selective with IMR-90EC50/A549EC50 ratios of 2.3 and 2.65, respectively. There was no correlation between reduction potential and A549 antiproliferation activity/selectivity.

Investigations of Bis(alkylthiocarbamato)copper Linkage Isomers.

Linkage isomers are coordination compounds with the same composition but different donor atoms, resulting in distinct physical and electronic structures. A pair of linkage isomers, CuL555 and CuL465, derived from phenylglyoxal bis(ethylthiocarbamate) were synthesized, isolated, and characterized by structural, electrochemical, and spectroscopic methods. The isomers are stable in solution under ambient conditions, but CuL465 converts to CuL555 in acid, consistent with quantum-chemical calculations. The complexes were screened against a lung adenocarcinoma cell line (A549) and a nonmalignant lung fibroblast cell line (IMR-90) to evaluate the antiproliferation activity. CuL555 and CuL465 possessed EC50 values of 0.113 ± 0.030 and 0.115 ± 0.038 µM for A549 and 1.87 ± 0.29 and 0.77 ± 0.22 µM for IMR-90, respectively.

Exploiting Metal-Ligand Cooperativity to Sequester, Activate, and Reduce Atmospheric Carbon Dioxide with a Neutral Zinc Complex.

As atmospheric levels of carbon dioxide (CO2) continue to increase, there is an immediate need to balance the carbon cycle. Current approaches require multiple processes to fix CO2 from the atmosphere or flue gas and then reduce it to value-added products. The zinc(II) catalyst Zn(DMTH) (DMTH = diacetyl-2-(4-methyl-3-thiosemicarbazonate)-3-(2-pyridinehydrazonato)) reduces CO2 from air to formate with a faradaic efficiency of 15.1% based on total charge. The catalyst utilizes metal-ligand cooperativity and redox-active ligands to fix, activate, and reduce CO2. This approach provides a new strategy that incorporates sustainable earth-abundant metals that are oxygen and water tolerant.

Synthesis, Characterization, and Biological Activity of Hybrid Thiosemicarbazone-Alkylthiocarbamate Metal Complexes.

A series of hybrid ligands (H2L1-H2L3) derived from 4-methyl-3-thiosemicarbazide and hydrazinecarbothioic acid O-alkyl esters were synthesized and characterized by NMR. The ligands were chelated with copper (4-6), nickel (7-9), and zinc (10-12) and characterized by spectroscopy, electrochemistry, and single crystal X-ray crystallography. The chelated metals displayed substantial anodic shifts in the CuII/I reduction potential of ∼160 mV relative to their bis(thiosemicarbazone) analogues. The metal chelates 4-12 were evaluated for potential anticancer activity by MTT assays, and selected results were confirmed by clonogenic and trypan blue assays. The copper derivatives 4 and 6 were found to have potent and cancer-selective antiproliferative effects, with GI50 values less than 100 nM in A549 lung adenocarcinoma cells compared with at least 20-fold less activity in IMR90 nonmalignant lung fibroblasts. In comparison, the nickel complexes were much less active and had little cancer-selectivity. Varying by ligand, the zinc complexes were less potent or had comparable activity compared to that of the corresponding copper complex. UV-visible spectroscopy indicated that zinc complex 10 was transmetalated in the presence of equimolar copper, whereas nickel complex 7 was not. Copper complexes 4 and 6 were also assessed in the NCI60 screen and were found to have cytotoxic activity against most solid tumor cell lines. In MTT assays, 4 and 6 were substantially more active against A549 cancer cells than Cu(ATSM) and were more cancer-selective (for A549 compared to IMR-90) than Cu(GTSM). Our results suggest that hybrid thiosemicarbazone-alkylthiocarbamate copper complexes have potential for development as new anticancer agents.

Effect of Stacking Interactions on the Translation of Structurally Related Bis(thiosemicarbazonato)nickel(II) HER Catalysts to Modified Electrode Surfaces.

A series of crystalline nickel(II) complexes (1-3) based on inexpensive bis(thiosemicarbazone) ligands diacetylbis(4-methyl-3-thiosemicarbazone) (H2ATSM), diacetylbis(4,4-dimethyl-3-thiosemicarbazone) (H2ATSDM), and diacetylbis[4-(2,2,2-trifluoroethyl)-3-thiosemicarbazone] (H2ATSM-F6) were synthesized and characterized by single-crystal X-ray diffraction and NMR, UV-visible, and Fourier transform infrared spectroscopies. Modified electrodes GC-1-GC-3 were prepared with films of 1-3 deposited on glassy carbon and evaluated as potential hydrogen evolution reaction (HER) catalysts. HER studies in 0.5 M aqueous H2SO4 (10 mA cm-2) revealed dramatic shifts in the overpotential from 0.740 to 0.450 V after extended cycling for 1 and 2. The charge-transfer resistances for GC-1-GC-3 were determined to be 270, 160, and 630 Ω, respectively. Characterization of the modified surfaces for GC-1 and GC-2 by scanning electron microscopy and Raman spectroscopy revealed similar crystalline coatings before HER that changed to surface-modified crystallites after conditioning. The surface of GC-3 had an initial glasslike appearance before HER that delaminated after HER. The differences in the surface morphology and the effect of conditioning are correlated with crystal-packing effects. Complexes 1 and 2 pack as columns of interacting complexes in the crystallographic a direction with short interplanar spacings between 3.37 and 3.54 Å. Complex 3 packs as columns of isolated molecules in the crystallographic b direction with long-range interplanar spacings of 9.40 Å.

Utilizing Charge Effects and Minimizing Intramolecular Proton Rearrangement to Improve the Overpotential of a Thiosemicarbazonato Zinc HER Catalyst.

The zinc(II) complex of diacetyl-2-(4-methyl-3-thiosemicarbazone)-3-(2-hydrazonepyridine), ZnL1 (1), was prepared and evaluated as a precatalyst for the hydrogen evolution reaction (HER) under homogeneous conditions in acetonitrile. Complex 1 is protonated on the noncoordinating nitrogen of the hydrazonepyridine moiety to yield the active catalyst Zn(HL1)OAc (2) upon addition of acetic acid. Addition of methyl iodide to 1 yields the corresponding methylated derivative ZnL2I (3). In solution, partial dissociation of the coordinated iodide yields the cationic derivative 3'. Complexes 1-3 were characterized by 1H NMR, FT-IR, and UV-visible spectroscopies. The solid-state structures of 2 and 3 were determined by single crystal X-ray diffraction. HER studies conducted in acetonitrile with acetic acid as the proton source yield a turnover frequency (TOF) of 7700 s-1 for solutions of 1 at an overpotential of 1.27 V and a TOF of 6700 s-1 for solutions of 3 at an overpotential of 0.56 V. For both complexes, the required potential for catalysis, Ecat/2, is larger than the thermodynamic reduction potential, E1/2, indicative of a kinetic barrier attributed to intramolecular proton rearrangement. The effect is larger for solutions of 1 (+440 mV) than for solutions of 3 (+160 mV). Controlled potential coulometry studies were used to determine faradaic efficiencies of 71 and 89% for solutions of 1 and 3, respectively. For both catalysts, extensive cycling of potential under catalytic conditions results in the deposition of a film on the glassy carbon electrode surface that is active as an HER catalyst. Analysis of the film of 3 by X-ray photoelectron spectroscopy indicates the complex remains intact upon deposition. A proposed ligand-centered HER mechanism with 1 as a precatalyst to 2 is supported computationally using density functional theory (DFT). All catalytic intermediates in the mechanism were structurally and energetically characterized with the DFT/B3LYP/6-311g(d,p) in solution phase using a polarizable continuum model (PCM). The thermodynamic feasibility of the mechanism is supported by calculation of equilibrium constants or reduction potentials for each proposed step.

A 5 + 1 Protic Acid Assisted Aza-Pummerer Approach for Synthesis of 4-Chloropiperidines from Homoallylic Amines.

We report that HCl·DMPU induces the formation of (thiomethyl)methyl carbenium ion from DMSO under mild conditions. Homoallylic amines react with this electrophile to generate 4-chloropiperidines in good yields. The method applies to both aromatic and aliphatic amines. The use of HCl·DMPU as both non-nucleophilic base and chloride source constitutes an environmentally benign alternative for piperidine formation. The reaction has a broad substrate scope, and the conditions offer good chemical yields with high functional group tolerance and scalability.

Metal-Assisted Ligand-Centered Electrocatalytic Hydrogen Evolution upon Reduction of a Bis(thiosemicarbazonato)Cu(II) Complex.

In this study, we report the electrocatalytic behavior of the neutral, monomeric Cu(II) complex of diacetyl-bis(N-4-methyl-3-thiosemicarbazonato), CuL1, for metal-assisted ligand-centered hydrogen evolution in acetonitrile and dimethylformamide. CuL1 displays a maximum turnover frequency (TOF) of 10 000 s-1 in acetonitrile and 5100 s-1 in dimethylformamide at an overpotential of 0.80 and 0.76 V, respectively. The rate law is first-order in catalyst and second-order in proton concentration. Gas analysis from controlled potential electrolysis confirms CuL1 as an electrocatalyst to produce H2 with a minimum Faradaic efficiency of 81% and turnover numbers as high as 73 while showing no sign of degradation over 23 h. The H2 evolution reaction (HER) was probed using deuterated acid, demonstrating a kinetic isotope effect of 7.54. A proton inventory study suggests one proton is involved in the rate-determining step. Catalytic intermediates were identified using 1H NMR, X-ray photoelectron, and UV-visible spectroscopies. All catalytic intermediates in the proposed mechanism were successfully optimized using density functional theory calculations with the B3LYP functional and the 6-311g(d,p) basis set and support the proposed mechanism.

Copper catalysed aerobic oxidation of benzylic alcohols in an imidazole containing N4 ligand framework.

The catalytic aerobic oxidation of benzylic alcohols to corresponding aldehydes has been investigated employing a tetradentate copper(ii) complex that incorporates N-methyl imidazole (NMI) as an integral part of an N4-ligand framework. The complex [L3-Cu]2+ [(L3 = 1-methyl-4,5-dihydro-1H-imidazol-2-yl)methyl(2-ethyl)amine] has been synthesized, characterized by spectroscopic and structural techniques, and its catalytic activity towards the aerobic oxidation of benzylic alcohols studied under ambient conditions. Catalytic turnover required addition of the nitroxyl radical initiator TEMPO. No oxidation was observed with hydroxyl radical initiators H2O2 or tetrabutylammonium hydroperoxide. Additional NMI enhanced turnover with yields up to 99% within 4 hours. The relative quantities of substrate, catalyst, TEMPO, and NMI were systematically varied in a series of experiments to determine optimal conditions. The effect of oxygen at various flow rates as an alternate to ambient aerobic conditions was also investigated.

Achieving regio- and stereo-control in the fluorination of aziridines under acidic conditions.

We developed an efficient fluorination protocol that converts easily accessible aziridines into ß-fluoroamines, which are important motifs in biologically active molecules. In contrast with traditional fluorination approaches, DMPU-HF has shown both higher reactivity and regioselectivity and good functional group tolerance; thus, a wide scope of ß-fluoroamines can now be accessed conveniently. The stereochemical behavior of the ring opening depends on the substitution pattern of the aziridine substrate.

Reversible methanol addition to copper Schiff base complexes: a kinetic, structural and spectroscopic study of reactions at azomethine C[double bond, length as m-dash]N bonds.

The reversible methanolysis of an azomethine C[double bond, length as m-dash]N in a series of copper(ii) Schiff base complexes has been investigated through combined spectroscopic, structural, and kinetic studies. Pentadentate copper(ii) complexes [L1-Cu(X)]Y (L1 = 1,2-bis[(1-methyl-2-imidazolyl)methyleneamino]ethane; X = Y = ClO4- (1); X = Y = TfO- (2); X = Y = BF4- (3); X = H2O, Y = (ClO4-)2 (4) spontaneously add methanol in a ligand centered reaction to yield stable, isolable hemiaminal ether product complexes 5-8. In methanol free solution, 5-8 spontaneously release alcohol to regenerate 1-4. The methanol addition reaction is first-order in methanol and first-order in complex with second-order rate constants varying from 1.1 × 10-4 to 187 × 10-4 M-1 s-1 dependent on the donor ability of the axial ligand. Rate constants for methanol elimination vary from 0.67 to 3.7 × 10-4 s-1 with dependence on the counterion and water content of the solvent. Equilibrium constants for methanolysis range from 1.5 to 51 M-1. Structural comparisons of the Schiff base complexes 1-4 and the hemiaminal ether complexes 5-8 suggest methanol addition is favored by the release of ligand strain associated with three planar five-membered chelates in 1-4.

Proposed Ligand-Centered Electrocatalytic Hydrogen Evolution and Hydrogen Oxidation at a Noninnocent Mononuclear Metal-Thiolate.

The noninnocent coordinatively saturated mononuclear metal-thiolate complex ReL3 (L = diphenylphosphinobenzenethiolate) serves as an electrocatalyst for hydrogen evolution or hydrogen oxidation dependent on the presence of acid or base and the applied potential. ReL3 reduces acids to H2 in dichloromethane with an overpotential of 380 mV and a turnover frequency of 32 ± 3 s(-1). The rate law displays a second-order dependence on acid concentration and a first-order dependence on catalyst concentration with an overall third-order rate constant (k) of 184 ± 2 M(-2) s(-1). Reactions with deuterated acid display a kinetic isotope effect of 9 ± 1. In the presence of base, ReL3 oxidizes H2 with a turnover frequency of 4 ± 1 s(-1). The X-ray crystal structure of the monoprotonated species [Re(LH)L2](+), an intermediate in both catalytic H2 evolution and oxidation, has been determined. A ligand-centered mechanism, which does not require metal hydride intermediates, is suggested based on similarities to the redox-regulated, ligand-centered binding of ethylene to ReL3.

A highly efficient and broadly applicable cationic gold catalyst.

Gold catalysts capable of promoting reactions at low-level loadings under mild conditions are the exception rather than the norm. We examined reactions where the regeneration of cationic gold catalyst (e.g., protodeauration) was the turnover limiting stage. By manipulating electron density on the substituents around phosphorus and introducing steric handles we designed a phosphine ligand that contains two electron-rich ortho-biphenyl groups and a cyclohexyl substituent. This ligand formed a gold complex that catalyzed common types of gold-catalyzed reactions including intra- and intermolecular XH (X=C, N, O) additions to alkynes and cycloisomerizations, with high turnover numbers at room temperature or slightly elevated temperatures (≤50 °C). Our new ligand can be prepared in one step from commercially available starting materials.

2-[(Di-methyl-phenyl-phosphanyl-idene)aza-nium-yl]-5-methyl-benzene-sulfonate benzene monosolvate.

The title compound, C15H18NO3PS·C6H6, is a rare example of a crystallographically characterized exocyclic phosphiniminium-arene-sulfonate zwitterion, which crystallises as its benzene solvate. The crystal structure shows that the N atom is protonated and that the iminium H atom forms both intra- and inter-molecular hydrogen bonds to the single-bonded sulfonate O atom in an R 2 (2)(4) graph-set motif. The dihedral angle between the aromatic rings in the main molecule is 89.49 (8)°.

Gold-catalyzed addition of N-hydroxy heterocycles to alkynes and subsequent 3,3-sigmatropic rearrangement.

Gold-catalyzed intermolecular addition of hydroxybenzotriazole derivatives to alkynes at room temperature, gives vinyl ethers 3 in high yields and with excellent regioselectivity. Unlike many other vinyl ethers, 3 can easily be purified by regular silica-gel chromatography. On heating, 3,3-sigmatropic rearrangement of 3 gives access to highly functionalized benzotriazoles. This two-step sequence represents an efficient oxygen transfer protocol which incorporates a nucleophilic oxygen atom into an alkyne group. Reaction of 3 with an electrophilic fluorinating reagent (Selectfluor) gives a fluorinated ketone regioselectively and in high yield.

Gold-catalyzed annulations of 2-alkynyl benzaldehydes with vinyl ethers: synthesis of dihydronaphthalene, isochromene, and bicyclo[2.2.2]octane derivatives.

With the suitable selection of a gold catalyst as well as the appropriate control of the reaction conditions, various new gold-catalyzed cyclizations of 2-alkynyl benzaldehyde with acyclic or cyclic vinyl ethers have been developed. Acetal-tethered dihydronaphthalene and isochromenes were obtained from the reactions of 2-alkynyl benzaldehydes with acyclic vinyl ethers under mild conditions. And, more interestingly, the gold-catalyzed reactions of 2-alkynyl benzaldehyde with a cyclic vinyl ether afforded the bicyclo[2.2.2]octane derivative involving two molecules of cyclic vinyl ethers. These products contain interesting substructures that have been found in many biologically active molecules and natural products. In addition, a gold-catalyzed homo-dimerization of 2-phenylethynyl benzaldehyde 1a was observed when the reaction was carried out in the absence of vinyl ether, affording a set of separable diastereomeric products. Plausible mechanisms for these transformations are discussed; a gold-containing benzopyrylium was regarded as the crucial intermediate by which a number of these new transformations took place.

Selective and reversible base-induced elimination of a ruthenium dithioether yields a vinyl metallosulfonium complex.

Chemical oxidation of tris(2-diphenylphosphinebenzenethiolato)ruthenate(II) [Ru-1](-) with ferrocenium hexafluorophosphate in the presence of ethylene yields [(2-diphenylphosphinebenzenethiolato)(ethane-1,2-diylbis(thio-2,1-phenylene)diphenylphosphine)ruthenium(II)] hexafluorophosphate, [Ru-1·C(2)H(4)]PF(6), from addition of the alkene across cis sulfur sites. The [Ru-1·C(2)H(4)](+) complex displays a single redox couple at +794 mV versus ferrocenium/ferrocene. (1)H NMR of [Ru-1·C(2)H(4)](+) displays ethylene resonances at δ = 1.29 (td, 1H), 1.59 (td, 1H), 2.78 (dd, 1H), and 3.03 (dd, 1H). In the presence of base [Ru-1·C(2)H(4)](+) is selectively deprotonated at the pseudoequatorial proton on the carbon α to the sulfur trans to phosphorus, yielding the vinyl metallosulfonium derivative [Ru-1·C(2)H(3)]. (1)H and (31)P NMR spectra of [Ru-1·C(2)H(3)] are temperature dependent, associated with inversion of the sulfur lone pair at the vinyl metallosulfonium. The activation energy for the fluxional process calculated using density functional theory (B3LYP/LANL2DZ+6-31g) of 14.36 kcal/mol is consistent with the experimentally determined value of 13.08 kcal/mol. The complex [Ru-1·C(2)H(3)] crystallizes as yellow blocks in the triclinic space group P-1 with unit cell dimensions of a = 11.2718(5) Å, b =12.0524(3) Å, c = 23.6075(10) Å, α = 101.715(3)°, ß = 98.154(4)°, and γ = 105.209(3)°. Addition of hydrochloric acid to [Ru-1·C(2)H(3)] regenerates [Ru-1·C(2)H(4)](+). Addition of DCl confirms the selectivity of this reverse reaction.