ABSTRACT
There has been much interest in integrating various inorganic nanoparticles (nanoscale colloids) in biology and medicine. However, buildup of a protein corona around the nanoparticles in biological media, driven by nonspecific interactions, remains a major hurdle for the translation of nanomedicine into clinical applications. In this study, we investigate the interactions between gold nanoparticles and serum proteins using a series of dihydrolipoic acid (DHLA)-based ligands. We employed gel electrophoresis combined with UV-vis absorption and dynamic light scattering to correlate protein adsorption with the nature and size of the ligand used. For instance, we found that AuNPs capped with DHLA alone promote nonspecific protein adsorption. In comparison, capping AuNPs with polyethylene glycol- or zwitterion-appended DHLA essentially prevents corona formation, regardless of ligand charge and size. Our results highlight the crucial role of surface chemistry and core material in protein corona formation and offer valuable information for the design of colloidal nanomaterials for biological applications.
Subject(s)
Metal Nanoparticles , Nanoparticles , Protein Corona , Gold , Ligands , ProteinsABSTRACT
There has been much interest in evaluating the strength of the coordination interactions between N-heterocyclic carbene (NHC) molecules and transition metal ions, nanocolloids and surfaces. We implement a top-down core digestion test of Au nanoparticles (AuNPs) triggered by incubation with a large molar excess of poly(ethylene glycol)-appended NHC molecules, where kinetic dislodging of surface atoms and formation of NHC-Au complexes progressively take place. We characterize the structure and chemical nature of the generated PEG-NHC-Au complexes using 1D and 2D 1H-13C NMR spectroscopy, supplemented with matrix assisted laser desorption/ionization mass spectrometry, and transmission electron microscopy. We further apply the same test using thiol-modified molecules and find that though etching can be measured the kinetics are substantially slower. We discuss our findings within the classic digestion of transition metal ores and colloids induced by interactions with sodium cyanide, which provides an insight into the strength of coordination between the strong σ-donating (soft Lewis base) NHC and Au surfaces (having a soft Lewis acid character), as compared to gold-to-gold covalent binding.
ABSTRACT
To stabilize and transport them through complex systems, nanoparticles are often encapsulated in polymeric nanocarriers, which are tailored to specific environments. For example, a hydrophilic polymer capsule maintains the circulation and stability of nanoparticles in aqueous environments. A more highly designed nanocarrier might have a hydrophobic core and a hydrophilic shell to allow the transport of hydrophobic nanoparticles and pharmaceuticals through physiological media. Polydimethylsiloxane, PDMS, is a hydrophobic material in a liquid-like state at room temperature. The preparation of stable, aqueous dispersions of PDMS droplets in water is problematic due to the intense mismatch in surface energies between PDMS and water. The present work describes the encapsulation of hydrophobic metal and metal oxide nanoparticles within PDMS nanodroplets using flash nanoprecipitation. The PDMS is terminated by amino groups, and the nanodroplet is capped with a layer of poly(styrenesulfonate), forming a glassy outer shell. The hydrophobic nanoparticles nucleate PDMS droplet formation, decreasing the droplet size. The resulting nanocomposite nanodroplets are stable in aqueous salt solutions without the use of surfactants. The hierarchical structuring, elucidated with small-angle X-ray scattering, offers a new platform for the isolation and transport of hydrophobic molecules and nanoparticles through aqueous systems.
ABSTRACT
Better insights into the fate of membraneless organelles could strengthen the understanding of the transition from prebiotic components to multicellular organisms. Compartmentalized enzyme reactions in a synthetic coacervate have been investigated, yet there remains a gap in understanding the enzyme interactions with coacervate as a substrate hub. Here, we study how the molecularly crowded nature of the coacervate affects the interactions of the embedded substrate with a protease. We design oligopeptide-based coacervates that comprise an anionic Asp-peptide (D10) and a cationic Arg-peptide (R5R5) with a proteolytic cleavage site. The coacervates dissolve in the presence of the main protease (Mpro) implicated in the coronavirus lifecycle. We capitalize on the condensed structure, introduce a self-quenching mechanism, and model the enzyme kinetics by using Cy5.5-labeled peptides. The determined specificity constant (kcat/KM) is 5817 M-1 s-1 and is similar to that of the free substrate. We further show that the enzyme kinetics depend on the type and quantity of dye incorporated into the coacervates. Our work presents a simple design for enzyme-responsive coacervates and provides insights into the interactions between the enzyme and coacervates as a whole.
Subject(s)
Peptides , Proteins , Peptides/chemistry , Oligopeptides , Peptide HydrolasesABSTRACT
Surface ligands play a critical role in controlling and defining the properties of colloidal nanocrystals. These aspects have been exploited to design nanoparticle aggregation-based colorimetric sensors. Here, we coated 13-nm gold nanoparticles (AuNPs) with a large library of ligands (e.g., from labile monodentate monomers to multicoordinating macromolecules) and evaluated their aggregation propensity in the presence of three peptides containing charged, thiolate, or aromatic amino acids. Our results show that AuNPs coated with the polyphenols and sulfonated phosphine ligands were good choices for electrostatic-based aggregation. AuNPs capped with citrate and labile-binding polymers worked well for dithiol-bridging and π-π stacking-induced aggregation. In the example of electrostatic-based assays, we stress that good sensing performance requires aggregating peptides of low charge valence paired with charged NPs with weak stability and vice versa. We then present a modular peptide containing versatile aggregating residues to agglomerate a variety of ligated AuNPs for colorimetric detection of the coronavirus main protease. Enzymatic cleavage liberates the peptide segment, which in turn triggers NP agglomeration and thus rapid color changes in <10 min. The protease detection limit is 2.5 nM.
Subject(s)
Colorimetry , Metal Nanoparticles , Colorimetry/methods , Gold/chemistry , Metal Nanoparticles/chemistry , Polymers , LigandsABSTRACT
Interactions of plasmonic nanocolloids such as gold nanoparticles and nanorods with proximal dye emitters result in efficient quenching of the dye photoluminescence (PL). This has become a popular strategy for developing analytical biosensors relying on this quenching process for signal transduction. Here, we report on the use of stable PEGylated gold nanoparticles, covalently coupled to dye-labeled peptides, as sensitive optically addressable sensors for determining the catalytic efficiency of the human matrix metalloproteinase-14 (MMP-14), a cancer biomarker. We exploit real-time dye PL recovery triggered by MMP-14 hydrolysis of the AuNP-peptide-dye to extract quantitative analysis of the proteolysis kinetics. Sub-nanomolar limit of detections for MMP-14 has been achieved using our hybrid bioconjugates. In addition, we have used theoretical considerations within a diffusion-collision framework to derive enzyme substrate hydrolysis and inhibition kinetics equations, which allowed us to describe the complexity and irregularity of enzymatic proteolysis of nanosurface-immobilized peptide substrates. Our findings offer a great strategy for the development of highly sensitive and stable biosensors for cancer detection and imaging.
Subject(s)
Matrix Metalloproteinase 14 , Metal Nanoparticles , Humans , Gold , Peptides , HydrolysisABSTRACT
We detail the assembly and characterization of quantum dot (QD)-dye conjugates constructed using a peptide bridge specifically designed to recognize and interact with a breast cancer biomarkerâmatrix metalloproteinase-14 (MMP-14). The assembled QD conjugates are then used as optically addressable probes, relying on Förster resonance energy transfer (FRET) interactions as a transduction mechanism to detect the activity of MMP-14 in solution phase. The QDs were first coated with dithiolane poly(ethylene glycol) (PEG) bearing a carboxyl group that allows coupling via amide bond formation with different dye-labeled peptides. The analytical capability of the conjugates is enabled by correlating changes in the FRET efficiency with the conjugate valence and/or QD-to-dye separation distance, triggered and modulated by enzymatic proteolysis of surface-tethered peptides. The FRET probe exhibits great sensitivity to enzyme digestion with sub-nanomolar limit of detection. We further analyze the proteolysis data within the framework of the Michaelis-Menten model, which considers the fact that surface-attached peptides have a slower diffusion coefficient than free peptides. This results in reduced collision frequency and lower catalytic efficiency, kcat/KM. Our results suggest that our conjugate design is promising, effective, and potentially useful for in vivo analysis.
Subject(s)
Quantum Dots , Quantum Dots/chemistry , Proteolysis , Matrix Metalloproteinase 14 , Peptides/chemistry , Fluorescence Resonance Energy Transfer/methodsABSTRACT
Organic-inorganic hybrid perovskites have shown tremendous potential for optoelectronic applications. Ion migration within the crystal and across heterointerfaces, however, imposed severe problems with material degradation and performance loss in devices. Encapsulating hybrid perovskite with a thin physical barrier can be essential for suppressing the undesirable interfacial reactions without inhibiting the desirable transport of charge carriers. Here, we demonstrated that nanoscale, pinhole-free Al2O3 layer can be coated directly on the perovskite CH3NH3PbI3 using atomic layer deposition (ALD). The success can be attributed to a multitude of strategies including surface molecular modification and hybrid ALD processing combining the thermal and plasma-enhanced modes. The Al2O3 films provided remarkable protection to the underlying perovskite films, surviving by hours in solvents without noticeable decays in either structural or optical properties. The results advanced the understanding of applying ALD directly on hybrid perovskite and provided new opportunities to implement stable and high-performance devices based on the perovskites.
ABSTRACT
Magnetic resonance imaging, MRI, relying on 19F nuclei has attracted much attention, because the isotopes exhibit a high gyromagnetic ratio (comparable to that of protons) and have 100% natural abundance. Furthermore, due to the very low traces of intrinsic fluorine in biological tissues, fluorine labeling allows easy visualization in vivo using 19F-based MRI. However, one of the drawbacks of the available fluorine tracers is their very limited solubility in water. Here, we detail the design and preparation of a set of water-compatible fluorine-rich polymers as contrast agents that can enhance the effectiveness of 19F-based MRI. The agents are synthesized using the nucleophilic addition reaction between poly(isobutylene-alt-maleic anhydride) copolymer and a mixture of amine-appended fluorine groups and polyethylene glycol (PEG) blocks. This allows control over the polymer architecture and stoichiometry, resulting in good affinity to water solutions. We further investigate the effects of introducing additional segmental mobility to the fluorine moieties in the polymer, by inserting a PEG linker between the moieties and the polymer backbone. We find that controlling the polymer stoichiometry and introducing additional segmental mobility enhance the NMR signals and narrow the peak profile. In particular, we assess the impact of the PEG linker on T2* and T1 relaxation times, using a series of gradient-recalled echo images with varying echo times, TE, or recovery time, TR, respectively. We find that for equivalent concentrations, the PEG linker greatly increases T2*, while maintaining high T1 values, as compared to polymers without this linker. Phantom images collected from these compounds show bright signals over a background with high intensities.
Subject(s)
Contrast Media , Fluorine , Contrast Media/chemistry , Fluorides , Fluorine/chemistry , Magnetic Resonance Imaging , Polyethylene Glycols , Polymers/chemistry , WaterABSTRACT
Colloidal lead halide perovskite quantum dots (PQDs) are relatively new semiconductor nanocrystals with great potential for use in optoelectronic applications. They also present a set of new scientifically challenging fundamental problems to investigate and understand. One of them is to address the rather poor colloidal and structural stability of these materials under solution phase processing and/or transfer between solvents. In this contribution, we detail the synthesis of a new family of multi-coordinating, bromide-based polysalt ligands and test their ability to stabilize CsPbBr3 nanocrystals in polar solutions. The ligands present multiple salt groups involving quaternary cations, namely ammonium and imidazolium as anchors for coordination onto PQD surfaces, along with several alkyl chains with varying chain length to promote solubilization in various conditions. The ligands provide a few key benefits including the ability to repair damaged surface sites, allow rapid ligand exchange and phase transfer, and preserve the crystalline structure and morphology of the nanocrystals. The polysalt-coated PQDs exhibit near unity PLQY and significantly enhanced colloidal stability in ethanol and methanol.
ABSTRACT
We have tested the ability of N-heterocyclic carbene (NHC)-modified ligands to coordinate and stabilize luminescent CdSe-ZnS core-shell quantum dot (QD) dispersions in hydrophilic media. In particular, we probed the effects of ligand structure and coordination number on the coating affinity to the nanocrystals. We find that such NHC-based ligands rapidly coordinate onto the QDs (requiring â¼5-10 min of reaction time), which reflects the soft Lewis base nature of the NHC groups, with its two electrons sharing capacity. Removal of the hydrophobic cap and promotion of carbene-driven coordination on the nanocrystals have been verified by 1H NMR spectroscopy, while 13C NMR was used to identify the formation of carbene-Zn complexes. The newly coated QD dispersions exhibit great long-term colloidal stability over a wide range of conditions. Additionally, we find that coordination onto the QD surfaces affects the optical and spectroscopic properties of the nanocrystals. These include a size-dependent red-shift of the absorption and fluorescence spectra and a pronounced increase in the measured fluorescence intensity when the samples are stored under white light exposure compared to those stored in the dark.
Subject(s)
Heterocyclic Compounds/chemistry , Methane/analogs & derivatives , Polymers/chemistry , Quantum Dots/chemistry , Carbon-13 Magnetic Resonance Spectroscopy , Ligands , Luminescence , Methane/chemistry , Microscopy, Electron, Transmission , Proton Magnetic Resonance SpectroscopyABSTRACT
The olfactory system is a driver of feeding behavior, whereby olfactory acuity is modulated by the metabolic state of the individual. The excitability of the major output neurons of the olfactory bulb (OB) can be modulated through targeting a voltage-dependent potassium channel, Kv1.3, which responds to changes in metabolic factors such as insulin, glucose, and glucagon-like peptide-1. Because gene-targeted deletion or inhibition of Kv1.3 in the periphery has been found to increase energy metabolism and decrease body weight, we hypothesized that inhibition of Kv1.3 selectively in the OB could enhance excitability of the output neurons to evoke changes in energy homeostasis. We thereby employed metal-histidine coordination to self-assemble the Kv1.3 inhibitor margatoxin (MgTx) to fluorescent quantum dots (QDMgTx) as a means to label cells in vivo and test changes in neuronal excitability and metabolism when delivered to the OB. Using patch-clamp electrophysiology to measure Kv1.3 properties in heterologously expressed cells and native mitral cells in OB slices, we found that QDMgTx had a fast rate of inhibition, but with a reduced IC50, and increased action potential firing frequency. QDMgTx was capable of labeling cloned Kv1.3 channels but was not visible when delivered to native Kv1.3 in the OB. Diet-induced obese mice were observed to reduce body weight and clear glucose more quickly following osmotic mini-pump delivery of QDMgTx/MgTx to the OB, and following MgTx delivery, they increased the use of fats as fuels (reduced respiratory exchange ratio). These results suggest that enhanced excitability of bulbar output neurons can drive metabolic responses.
Subject(s)
Energy Metabolism/physiology , Kv1.3 Potassium Channel/antagonists & inhibitors , Kv1.3 Potassium Channel/metabolism , Obesity/metabolism , Olfactory Bulb/metabolism , Quantum Dots/metabolism , Animals , Diet, High-Fat/adverse effects , Dose-Response Relationship, Drug , Energy Metabolism/drug effects , Female , Kv1.3 Potassium Channel/analysis , Male , Mice , Mice, Inbred C57BL , Mice, Obese , Obesity/drug therapy , Obesity/etiology , Olfactory Bulb/chemistry , Olfactory Bulb/drug effects , Quantum Dots/analysis , Scorpion Venoms/pharmacology , Scorpion Venoms/therapeutic useABSTRACT
The successful growth of colloidal lead halide perovskite quantum dots (PQDs) has generated tremendous interest in the community, due to the unique properties and the promise PQDs offer for use in applications involving light-emitting devices and solar cell technology. However, tangible progress in probing their fundamental properties and/or their integration into optoelectronic devices has been hampered by issues of colloidal and photophysical instability. Here, we introduce a promising surface coating strategy relying on a polyzwitterion polymer, where high-affinity binding onto the QDs is driven by multicoordinating electrostatic interactions with the ion-rich surfaces of CsPbBr3 PQDs. The polymer ligands were synthesized by installing a stoichiometric mixture of amine-modified sulfobetaine anchors and solubilizing motifs on poly(isobutylene-alt-maleic anhydride), PIMA, via nucleophilic addition reaction. We find that this coating approach imparts enhanced colloidal and photophysical stability to the nanocrystals over a broad range of solvent conditions and in powder form. This approach also allows easy phase transfer of the PQDs from nonpolar media to an array of solutions with varying polarities and properties. Additionally, the stabilization strategy preserves the photophysical and structural characteristics of the nanocrystals over a period extending to 1.5 years under certain conditions.
ABSTRACT
Hydrodynamic size is a characteristic dimension that reflects the Brownian diffusion of objects, such as proteins, macromolecules, and various colloids when dissolved/dispersed in fluid phases. This property is crucial when investigating the utility of colloidal nanocrystals and polymeric materials in biology. Dynamic light scattering (DLS) has been widely used to measure the diffusion coefficient and hydrodynamic size of such systems. Comparatively, diffusion-ordered NMR spectroscopy (DOSY-NMR) is a relatively new analytical method that has provided researchers with an alternative experimental approach to access such information. Here, we apply DLS and DOSY-NMR simultaneously to characterize the diffusion coefficient and hydrodynamic size of several sets of nanocolloids, including dispersions of gold nanoparticles and luminescent quantum dots that are surface-capped with either hydrophobic or hydrophilic coatings, as well as a monomer and a low-molecular-weight polymer. We compare, side by side, the findings acquired from each measurement, which has allowed us to identify the benefits and constraints of each technique. Our results show that the two approaches provide comparable data when larger size nanocolloids are probed. However, we find that DOSY is substantially more effective in characterizing nanocolloids that are fluorescent and/or have very small dimensions, as well as molecular-scale organic ligands, where DLS reaches its limit. Additionally, we find that, compared to DLS, DOSY tends to require higher solute concentrations and longer collection time to generate data with high signal-to-noise ratios.
ABSTRACT
In the past three decades, interest in using nanoparticles as diagnostic tools to interrogate various biosystems has witnessed remarkable growth. For instance, it has been shown that nanoparticle probes enable the study of cellular processes at the single molecule level. These advances provide new opportunities for understanding fundamental problems in biology, innovation in medicine, and the treatment of diseases. A multitude of nanoparticles have been designed to facilitate in vitro or in vivo sensing, imaging, and diagnostics. Some of those nanoparticle platforms are currently in clinical trials or have been approved by the U.S. Food and Drug Administration. Nonetheless, using nanoparticles in biology is still facing several obstacles, such as poor colloidal stability under physiological conditions, nonspecific interactions with serum proteins, and low targeting efficiency in biological fluids, in addition to issues of uncontrolled biodistribution and cytotoxicity. All these problems are primarily controlled by the surface stabilizing coating used.In this Account, we summarize recent progress made in our laboratory focused on the development of multifunctional polymers as coordinating ligands, to tailor the surface properties of nanoparticles and facilitate their application in biology. We first detail the advantageous features of the coating strategy, followed by a discussion of the key parameters in the ligand design. We then describe the synthesis and use of a series of multicoordinating polymers as ligands optimized for coating quantum dots (QDs), gold nanoparticles (AuNPs), and magnetic nanoparticles (MNPs), with a focus on (i) how to improve the colloidal stability and antifouling performance of materials in biological conditions; (ii) how to design highly compact coating, without compromising colloidal stability; and (iii) how to tailor the surface functionalities to achieve conjugation to target biomolecules. We also highlight the ability of a phase transfer strategy, mediated by UV irradiation, to promote rapid ligand exchange while preserving the integrity of key functional groups. We then summarize the bioconjugation approaches applied to polymer-coated nanoparticles, with emphasis on the ability of metal-histidine self-assembly and click chemistry, to control the final nanoparticle bioconjugates. Finally, we demonstrate the use of polymer-coated nanoparticles for sensor design based on redox-active interactions and peptide-mediated intracellular delivery. We anticipate that the coating design presented in this Account would advance the integration of nanoparticles into biology and medicine.
Subject(s)
Engineering , Nanostructures/chemistry , Nanotechnology/methods , Polymers/chemistry , Animals , Biocompatible Materials/chemistry , HumansABSTRACT
We detail the preparation of highly fluorescent quantum dots (QDs), surface-engineered with multifunctional polymer ligands that are compact and readily compatible with strain-promoted click conjugation, and the use of these nanocrystals in immunofluorescence and in vivo imaging. The ligand design combines the benefits of mixed coordination (i.e., thiol and imidazole) with zwitterion motifs, yielding sterically-stabilized QDs that present a controllable number of azide groups, for easy conjugation to biomolecules via the selective click chemistry. The polymer coating was characterized using NMR spectroscopy to extract estimates of the diffusion coefficient, hydrodynamic size, and ligand density. The azide-functionalized QDs were conjugated to anti-tropomyosin receptor kinase B antibody (α-TrkB) or to the brain-derived neurotrophic factor (BDNF). These conjugates were highly effective for labeling the tropomyosin receptor kinase B (TrkB) in pyramidal neurons within cortical tissue and for monitoring the BDNF induced activation of TrkB signaling in live neuronal cells. Finally, the polymer-coated QDs were applied for in vivo imaging of Drosophila melanogaster embryos, where the QDs remained highly fluorescent and colloidally stable, with no measurable cytotoxicity. These materials would be of great use in various imaging applications, where a small size, ease of conjugation, and great colloidal stability for in vivo studies are needed.
Subject(s)
Fluorescent Antibody Technique , Fluorescent Dyes/chemistry , Optical Imaging/methods , Polymers/chemistry , Quantum Dots/chemistry , Animals , Azides/chemistry , Cell Line , Click Chemistry , Drosophila melanogaster/embryology , Imidazoles/chemistry , Ligands , Neurons/cytology , Particle Size , Signal Transduction , Sulfhydryl Compounds/chemistryABSTRACT
Coating inorganic nanocrystals [e.g., quantum dots (QDs) and gold nanoparticles] with polymer ligands presenting multiple lipoic acid anchoring groups provides nanocolloids with remarkable long-term colloidal and photophysical stability. Here, we show that the natural swelling of macromolecules leaves a fraction of the lipoic acid groups in the surface coating free, which are targeted for activation and conjugation to target molecules, using the reliable sulfhydryl-to-maleimide reaction. This implies that simple and efficient functionalization of the nanocrystals can be achieved without introducing additional reactive groups in the coating. We apply a photomediated ligand exchange strategy to luminescent QDs and AuNPs and react the resulting nanocrystals with maleimide Cy3 dye. We then use optical absorption and resonance energy transfer measurements applied to QD-Cy3 and AuNP-Cy3 conjugates to extract estimates for the fraction of accessible lipoic acid groups per QD or AuNP. In addition, we demonstrate the potential utility of this approach by constructing a ratiometric pH sensor made of QD-SNARF conjugates. Our ligand design combined with the photoligation strategy yield colloidally stable dispersions of QDs and AuNPs that present accessible reactive thiols, without introducing new functionalities or requiring disulfide reducing reagents, making them useful for potential use in applications such as biological sensing and imaging.
ABSTRACT
We report a simple strategy to grow highly fluorescing, near-infrared-emitting nanoclusters (NCs) made of bimetallic Au/Ag cores, surface capped with a mixture of triphenylphosphine and various monothiol ligands. The ligands include short chain aliphatic monothiols, which yields hydrophobic NCs, and poly(ethylene glycol)- or zwitterion-appended monothiols, which yield NCs that are readily dispersible in buffer media. The reaction uses well-defined triphenylphosphine-protected Au11 clusters (as precursors) that are reacted with Ag(i)-thiolate complexes. The prepared materials are small (diameter <2 nm, as characterized by TEM) with emission peak at 730-760 nm and long lifetime (â¼8-12 µs). The quantum yield measured for these materials in both hydrophobic and hydrophilic dispersions is â¼40%. High-magnification dark field STEM and X-ray photoelectron spectroscopy measurements show the presence of both metal atoms in the core, with measured binding energies that agree with reported values for nanocluster materials. The NIR emission combined with high quantum yield, small size, colloidal stability in buffer media and ease of surface functionalization afforded by the coating, make these materials suitable for investigating fundamental questions and potentially useful for biological sensing and imaging applications.
ABSTRACT
Nonspecific interactions in biological media can lead to the formation of a protein corona around nanocolloids, which tends to alter their behavior and limit their effectiveness when used as probes for imaging or sensing applications. Yet, understanding the corona buildup has been challenging. We hereby investigate these interactions using luminescent quantum dots (QDs) as a model nanocolloid system, where we carefully vary the nature of the hydrophilic block in the surface coating, while maintaining the same dihydrolipoic acid (DHLA) bidentate coordinating motif. We first use agarose gel electrophoresis to track changes in the mobility shift upon exposure of the QDs to protein-rich media. We find that QDs capped with DHLA (which presents a hydrophobic alkyl chain terminated with a carboxyl group) promote corona formation, in a concentration-dependent manner. However, when a polyethylene glycol block or a zwitterion group is appended onto DHLA, it yields a coating that prevents corona buildup. Our results clearly confirm that nonspecific interactions with protein-rich media are strongly dependent on the nature of the hydrophilic motif used. Additional gel experiments using SDS-PAGE have allowed further characterization of the corona protein, and showed that mainly a soft corona forms around the DHLA-capped QDs. These findings will be highly informative when designing nanocolloids that can find potential use in biological applications.
Subject(s)
Protein Corona/chemistry , Quantum Dots/chemistry , Hydrophobic and Hydrophilic Interactions , Serum Albumin, Bovine/chemistry , Surface Properties , Thioctic Acid/analogs & derivatives , Thioctic Acid/chemistryABSTRACT
Assemblies of metal nanostructures and fluorescent molecules represent a promising platform for the development of biosensing and near-field imaging applications. Typically, the interaction of molecular fluorophores with surface plasmons in metals results in either quenching or enhancement of the dye excitation energy. Here, we demonstrate that fluorescent molecules can also engage in a reversible energy transfer (ET) with proximal metal surfaces, during which quenching of the dye emission via the energy transfer to localized surface plasmons can trigger delayed ET from metal back to the fluorescent molecule. The resulting two-step process leads to the sustained delayed photoluminescence (PL) in metal-conjugated fluorophores, as was demonstrated here through the observation of increased PL lifetime in assemblies of Au nanoparticles and organic dyes (Alexa 488, Cy3.5, and Cy5). The observed enhancement of the PL lifetime in metal-conjugated fluorophores was corroborated by theoretical calculations based on the reverse ET model, suggesting that these processes could be ubiquitous in many other dye-metal assemblies.