ABSTRACT
The uterine tube extracellular matrix is a key component that regulates tubal tissue physiology, and it has a region-specific structural distribution, which is directly associated to its functions. Considering this, the application of biological matrices in culture systems is an interesting strategy to develop biomimetic tubal microenvironments and enhance their complexity. However, there are no established protocols to produce tubal biological matrices that consider the organ morphophysiology for such applications. Therefore, this study aimed to establish region-specific protocols to obtain decellularized scaffolds derived from porcine infundibulum, ampulla, and isthmus to provide suitable sources of biomaterials for tissue-engineering approaches. Porcine uterine tubes were decellularized in solutions of 0.1% SDS and 0.5% Triton X-100. The decellularization efficiency was evaluated by DAPI staining and DNA quantification. We analyzed the ECM composition and structure by optical and scanning electronic microscopy, FTIR, and Raman spectroscopy. DNA and DAPI assays validated the decellularization, presenting a significative reduction in cellular content. Structural and spectroscopy analyses revealed that the produced scaffolds remained well structured and with the ECM composition preserved. YS and HEK293 cells were used to attest cytocompatibility, allowing high cell viability rates and successful interaction with the scaffolds. These results suggest that such matrices are applicable for future biotechnological approaches in the reproductive field.
ABSTRACT
OBJECTIVES: to evaluate the quality and stability of adhesive interfaces established by self-etching adhesives on caries-affected primary dentin (CAD) treated with glutaraldehyde (GA) or silver diamine fluoride (SDF). METHODS: 42 primary molars were exposed to a microbiological caries-inducing protocol and divided into 6 groups according to the adhesive system (Clearfil SE - CL or FL Bond II - FL) and pretreatment (water, GA or SDF) applied on CAD. One tooth from each group was analyzed for surface modification using infrared spectroscopy. Crowns were restored with resin composite (n = 36) and cut into beams and slices. The beams were subjected to microtensile testing, Raman spectroscopy and SEM after 24 h and 6 months of storage. The slices were analyzed using Micro-Raman spectroscopy to determine the diffusion zone thickness (DZ) in each period. Data were analyzed by ANOVA and Tukey or Kruskal-Wallis and Dunn tests (α = 0.05%). RESULTS: SDF reduced the immediate bond strength for both adhesives. The control groups showed a decrease in BS after 6 months in artificial saliva. GA increased immediate DZ for FL, while SDF had the opposite effect on CL. GA decreased the DZ for FL at 6 months. There was a predominance of adhesive failures with areas of cohesive dentin fractures within control groups. SIGNIFICANCE: Modifications caused by dentin surface treatments may directly affect the performance of adhesive systems and the quality and stability of adhesive restorations.
Subject(s)
Adhesives , Dental Bonding , Adhesives/pharmacology , Glutaral , Dental Caries Susceptibility , Dentin , Tensile Strength , Composite Resins/chemistry , Dentin-Bonding Agents/pharmacology , Dentin-Bonding Agents/chemistry , Resin Cements/chemistry , Materials TestingABSTRACT
In immunocompetent individuals, Fusarium spp. stands out as the causative agent of onychomycosis, among the non-dermatophyte molds. Despite evidence indicating that Fusarium oxysporum organizes itself in the form of a biofilm causing onychomycosis, there is little literature on the etiopathogenesis of the biofilm on the nail, specifically the signaling molecules present, known as quorum sensing (QS). Thus, this study detected the presence of a molecule related to QS from the ex vivo biofilm of F. oxysporum on human nail and investigated its effect on preformed biofilm in vitro. The detection and physicochemical characterization of a QS molecule, from the extracellular matrix (ECM), was carried out by Fourier transform infrared (FTIR) spectroscopy with an attenuated total reflectance (ATR) accessory and by headspace gas chromatography coupled to mass spectrometry (GC-MS) analyses. Determination of viable cells, cell activity, total biomass, ECM components and scanning electron microscopy (SEM) were performed to evaluate the influence of the QS molecule on the in vitro biofilm of F. oxysporum. The beginning, in the ex vivo biofilm of F. oxysporum on human nails, the volatile organic compound 2-ethyl-1-hexanol (2EH) was detected as a component of QS. Thereafter in vitro analyses, synthetic 2EH was able to modulate the biofilm by stimulating its filament, increasing total biomass and ECM production in terms of total carbohydrates, but with a reduction in total proteins and nucleic acids. We thus evidence, for the first time, the presence of 2EH in the biofilm of F. oxysporum, developed on the human nail, and the in vitro action of this compound as a QS molecule.
ABSTRACT
The application of decellularized scaffolds for artificial tissue reconstruction has been an approach with great therapeutic potential in regenerative medicine. Recently, biomimetic ovarian tissue reconstruction was proposed to reestablish ovarian endocrine functions. Despite many decellularization methods proposed, there is no established protocol for whole ovaries by detergent perfusion that is able to preserve tissue macro and microstructure with higher efficiency. This generated biomaterial may have the potential to be applied for other purposes beyond reproduction and be translated to other areas in the tissue engineering field. Therefore, this study aimed to establish and standardize a protocol for porcine ovaries' decellularization based on detergent perfusion and ultrasonication to obtain functional whole-ovary scaffolds. For that, porcine ovaries (n = 5) were perfused with detergents (0.5% SDS and 1% Triton X-100) and submitted to an ultrasonication bath to produce acellular scaffolds. The decellularization efficiency was evaluated by DAPI staining and total genomic DNA quantification. ECM morphological evaluation was performed by histological, immunohistochemistry, and ultrastructural analyses. ECM physico-chemical composition was evaluated using FTIR and Raman spectroscopy. A cytocompatibility and cell adhesion assay using murine fibroblasts was performed. Results showed that the proposed method was able to remove cellular components efficiently. There was no significant ECM component loss in relation to native tissue, and the scaffolds were cytocompatible and allowed cell attachment. In conclusion, the proposed decellularization protocol produced whole-ovaries scaffolds with preserved ECM composition and great potential for application in tissue engineering.
Subject(s)
Ovary , Tissue Scaffolds , Female , Swine , Mice , Animals , Tissue Scaffolds/chemistry , Detergents/pharmacology , Extracellular Matrix/metabolism , PerfusionABSTRACT
We report the recent progress on diode-pumped high-power continuous-wave Pr:LiYF4 (YLF) green laser and deep ultraviolet (DUV) laser generation via intracavity frequency doubling. Using two InGaN blue diode lasers as pump source to form a double-end pumping geometry, in this work, we have demonstrated a green laser at 522â nm with a maximum output power of 3.42 W, which is believed to be the highest power ever achieved in all-solid-state Pr3+ lasers in this specific spectral region. Moreover, by intracavity frequency doubling of the achieved green laser, we have further obtained a DUV laser at about 261â nm with a maximum output power of 1.42 W, which is far higher than previous results. The watt-level 261-nm laser paves the way towards the realization of simple and compact DUV source for a variety of applications.
ABSTRACT
Erythrosine displays potential photodynamic activity against microorganisms and unhealthy cells. However, erythrosine has high hydrophilicity, negatively impacting on permeation through biological membranes. Combining biological macromolecules and thermoresponsive polymers may overcome these erythrosine-related issues, enhancing retention of topically applied drugs. The aim of this work was to investigate the performance of adhesive and thermoresponsive micellar polymeric systems, containing erythrosine in neutral (ERI) or disodium salt (ERIs) states. Optimized combinations of poloxamer 407 (polox407) and sodium carboxymethylcellulose (NaCMC) or hydroxypropyl methylcellulose (HPMC) were used as platforms for ERI/ERIs delivery. The rheological and mechanical properties of the systems was explored. Most of the formulations were plastic, thixotropic and viscoelastic at 37 °C, with suitable gelation temperature for in situ gelation. Mechanical parameters were reduced in the presence of the photosensitizer, improving the softness index. Bioadhesion was efficient for all hydrogels, with improved parameters for mucosa in contrast to skin. Formulations composed of 17.5 % polox407 and 3 % HPMC or 1 % NaCMC with 1 % (w/w) ERI/ERIs could release the photosensitizer, reaching different layers of the skin/mucosa, ensuring enough production of cytotoxic species for photodynamic therapy. Functional micelles could boost the photodynamic activity of ERI and ERIs, improving their delivery and contact time with the cells.
Subject(s)
Adhesives , Cellulose , Erythrosine/pharmacology , Photosensitizing Agents/pharmacology , Poloxamer , Polymers , Hypromellose DerivativesABSTRACT
The aim of this study was to evaluate the influence of various opacities and thicknesses of lithium disilicate on the degree of conversion (DC) of two resin cements and on their bond strength (BS) to the ceramic. Two hundred and forty ceramic samples of lithium disilicate with high translucency (HT), low translucency (LT), and medium opacity (MO) were obtained from IPS e. max CAD in five different thicknesses. Light-cured and dual-cured resin cements were used for DC (n = 9) and BS (n = 8). Cement samples were light-cured under ceramic samples and analyzed using a Raman confocal spectrometer to determine the DC. For BS, resin cement cylinders were fabricated using ceramic samples which were thsen subjected to a microshear bond strength test. The mean values were provided for statistical analysis. The increase in thickness resulted in a decrease in DC for both cements under all experimental conditions, but only affected the BS of the light-cured cement for the MO ceramic. Comparing the opacities, the most translucent ceramics with particular thicknesses exhibited higher DC values than the less translucent ceramics. The LT and MO ceramics with certain thicknesses exhibited the highest BS values than the HT. The dual-cured cement generally showed highest values in both analyses than the light-cured cement. A thicker and more opaque ceramic material can reduce the DC of the cement. The BS decreases with the increasing thickness of the more-opaque ceramics.
Subject(s)
Dental Porcelain , Resin Cements , Resin Cements/chemistry , Materials Testing , Ceramics/chemistry , Surface PropertiesABSTRACT
The environment can modify the physiology and body protective function of the skin. Propolis (PRP) and curcumin (CUR) possess important antioxidant and antimicrobial properties, and they can be administered in a combined way and using photodynamic therapy (PDT). Emulgels can control drug release due to the physicochemical properties of the gel and the emulsion. They constitute a good strategy for achieving an improved platform for the combined delivery of PRP and CUR. There are no other studies of emulgels composed of PRP and CUR and their performance as antimicrobial and skin healing using or not PDT. This study aimed to investigate the effect of Carbopol 934 P (C934P), 974 P (C974P) or polycarbophil (PC) on physicochemical stability, antioxidant activity, drug release profile, antimicrobial activity, and ex vivo skin permeation and retention of emulgels containing PRP and CUR. Formulations containing C974P or PC displayed improved stability and antioxidant activity. They displayed activity against Staphylococcus aureus and modified (extended) drug release, governed mainly by non-Fickian anomalous transport. C974P and PC resulted in improved emulgels for combined CUR and PRP delivery, allowing the drugs to cross the stratum corneum, and permeate the epidermis, reaching the dermis. The selected emulgels are candidates for further studies to prove their action and benefits to skin health.
Subject(s)
Anti-Infective Agents , Curcumin , Propolis , Antioxidants/pharmacology , Anti-Infective Agents/pharmacology , Gels/chemistryABSTRACT
BACKGROUND: Onychomycosis (OM) is a common nail plate disorder caused by dermatophyte molds, yeasts, and non-dermatophyte molds, which use keratin in the nail plate as an energy source. OM is characterized by dyschromia, increased nail thickness, subungual hyperkeratosis, and onychodystrophy, and is typically treated with conventional antifungals despite frequent reports of toxicity, fungal resistance, and OM recurrence. Photodynamic therapy (PDT) with hypericin (Hyp) as a photosensitizer (PS) stands out as a promising therapeutic modality. When excited by a specific wavelength of light and in the presence of oxygen, to lead to photochemical and photobiological reactions on the selected targets. METHODS: OM diagnosis was made in three suspected cases, and the causative agents were identified by classical and molecular methods, and confirmed by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). Susceptibility of planktonic cells of the clinical isolates to conventional antifungals and PDT-Hyp was evaluated, and photoacoustic spectroscopy (PAS) of Hyp permeation in nail fragments ex vivo was analyzed. Furthermore, the patients opted to undergo PDT-Hyp treatment and were subsequently followed up. The protocol was approved by the human ethics committee (CAAE, number 14107419.4.0000.0104). RESULTS: The etiological agents of OM in patients ID 01 and ID 02 belonged to the Fusarium solani species complex, being identified as Fusarium keratoplasticum (CMRP 5514) and Fusarium solani (CMRP 5515), respectively. For patient ID 03, the OM agent was identified as Trichophyton rubrum (CMRP 5516). PDT-Hyp demonstrated a fungicidal effect in vitro, with reductions of p3 log10 (p < 0.0051 and p < 0.0001), and the PAS analyses indicated that Hyp could completely permeate through both healthy and OM-affected nails. After four sessions of PDT-Hyp, mycological cure was observed in all three cases, and after seven months, clinical cure was confirmed. CONCLUSION: PDT-Hyp showed satisfactory results in terms of efficacy and safety, and thus can be considered a promising therapy for the clinical treatment of OM.
Subject(s)
Nail Diseases , Onychomycosis , Photochemotherapy , Humans , Onychomycosis/drug therapy , Onychomycosis/microbiology , Antifungal Agents/pharmacology , Antifungal Agents/therapeutic use , Photosensitizing Agents/therapeutic use , Photochemotherapy/methods , Nail Diseases/drug therapyABSTRACT
PURPOSE: The present study aimed to assess fatigue resistance and color modifications of endodontically treated incisors (ETIs) submitted to internal bleaching and restored using three different techniques. MATERIALS AND METHODS: Forty-five maxillary central incisors received endodontic treatment and were internally bleached. After the completion of bleaching, the ETIs were divided into three groups (n = 15) according to the different restoration procedures: 1) glass-ionomer cement base covered with composite resin (GI); 2) short fiber-reinforced composite resin base with composite resin (SF); 3) composite resin restoration over a fiberglass post (FP). Specimens were subjected to accelerated fatigue testing: frequency of 5 Hz, beginning with a load of 100 N for 5000 cycles and a 25-N load increase applied every 1700 cycles until a load of 1200 N was reached. Samples were loaded until fracture. The Kaplan-Meier survival analysis with the log-rank post hoc test were performed (α = 0.05). Tooth color was measured 4 weeks after the bleaching treatment and again after the final restoration procedure using a spectrophotometer and the Commission Internationale de l'Eclairage (CIE) L*a*b* system. L* values of the specimens were analyzed using the Shapiro-Wilk and paired sample t tests (α = 0.05). RESULTS: All groups showed similar survival mean cycles until failure (P = 0.332) and presented a major number of nonrestorable failures. The GI group presented the lowest number of nonrepairable fractures (GI = 68%, SF = 79%, FP = 86%) and showed the most stable L* value (P = 0.987). CONCLUSIONS: The fatigue survival of internally bleached ETIs was not affected by the restorative technique utilized. Retaining the glass-ionomer base and covering the surface with composite resin should provide optimal color stability.
Subject(s)
Post and Core Technique , Tooth Fractures , Tooth, Nonvital , Humans , Incisor , Composite Resins , Glass Ionomer Cements , Hypochlorous Acid , Tooth, Nonvital/therapy , Dental Stress Analysis , Dental Restoration FailureABSTRACT
Copaiba oil-resin (COR) extracted from Copaifera reticulata Ducke has been used as a natural chemotherapeutic agent for a wide range of therapeutic applications. This study presents an emulgel design with a high concentration of COR, designed to prevent and treat mastitis. The COR was stabilized in a gel matrix constituted by carbopol C934P and Pluronic® F127 (ECO formulation) ratios. The permeation study of ECO was accessed by Fourier transform infrared photoacoustic spectroscopy (FTIR-PAS). The results reveal a high capacity of ECO to permeate deep skin layers. Dairy cows with a history of mastitis were used as in vivo models and exposed to ECO treatment. Monitoring of the teat's inflammatory response showed that ECO effectively prevents mastitis. Furthermore, the ECO formulation was able to form a thin film gel on the application side, preventing fly proliferation and significantly reducing the pathogen load. This study reveals a drug that can used as an alternative application for mastitis in human or veterinary clinics.
ABSTRACT
Colocasia esculenta (L.) Schott is a tuberous plant, also known as taro, employed as food worldwide for its renowned nutritional properties but also traditionally used in several countries for medical purposes. In this study, methanolic extracts were prepared from the corms and leaves of Colocasia, subsequently fractionated via molecular exclusion chromatography (RP-HPLC) and their anti-tumor activity assessed in an in vitro model of gastric adenocarcinoma (AGS cells). Vorm extract and isolated fractions II and III affected AGS cell vitality in a dose-dependent manner through the modulation of key proteins involved in cell proliferation, apoptosis, and cell cycle processes, such as caspase 3, cyclin A, cdk2, IkBα, and ERK. To identify bioactive molecules responsible for anti-tumoral activity fractions II and III were further purified via RP-HPLC and characterized via nuclear magnetic resonance (NMR) and electrospray mass spectrometry (ESI-MS) techniques. The procedure enabled the identification of ten compounds including lignans and neolignans, some isolated for the first time in taro, uncommon megastigmane derivatives, and a gallic acid derivative. However, none of the isolated constituents showed efficacy equivalent to that of the fractions and total extract. This suggests that the whole Colocasia phytocomplex has intriguing anti-tumor activity against gastric cancer.
Subject(s)
Adenocarcinoma , Colocasia , Stomach Neoplasms , Stomach Neoplasms/drug therapy , Adenocarcinoma/drug therapy , Apoptosis , Plant Extracts/pharmacologyABSTRACT
Recently, the number of new cases of cutaneous leishmaniasis has been of concern among health agencies. Research that offers new therapeutic alternatives is advantageous, especially those that develop innovative drugs. Therefore, this paper presents the incorporation of Copaifera reticulata Ducke and chlorophyll extract into Pluronic®® F127 and Carbopol gels, under optimized polymer quantities. The chlorophyll extract (rich in photosensitizing compounds) was obtained by continuous-flow pressurized liquid extraction (PLE), a clean, environmentally friendly method. The system aims to act as as a leishmanicidal, cicatrizant, and antibiotic agent, with reinforcement of the photodynamic therapy (PDT) action. Rheological and mechanical analyses, permeation studies and bioadhesiveness analyses on human skin, and PDT-mediated activation of Staphylococcus aureus were performed. The emulgels showed gelation between 13° and 15 °C, besides pseudoplastic and viscoelastic properties. Furthermore, the systems showed transdermal potential, by releasing chlorophylls and C. reticulata Ducke into the deep layers of human skin, with good bioadhesive performance. The application of PDT reduced three logarithmic colony-forming units of S. aureus bacteria. The results support the potential of the natural drug for future clinical trials in treating wounds and cutaneous leishmania.
ABSTRACT
Fungal biofilms have been involved in the pathogenesis of onychomycosis, but the aspects contributing to this association need to be enlightened. This study aimed to investigate the ability of three different fungi to form biofilm on the nail. All evaluated fungi were able to grow on the nails, using them as the only nutritional source and formed a structure strongly suggestive of biofilms. However, their architecture and morphology were highly contrasting: Candida albicans showed dense growth, exhibited a well-structured community and a large amount of extracellular matrix (ECM), and FTIR-ATR spectroscopy reinforced these findings revealing components suggestive of the biofilm. For Fusarium oxysporum, these events were also observed, but in lower intensity. Furthermore, while Trichophyton rubrum presented a well-organized architecture, the ECM was not visualized. We hypothesize that these findings are related to the symptomatology of onychomycosis. When it is caused by a non-dermatophyte, it usually is accompanied with paronychia, pain, oedema, inflammation and few signals of keratolysis, while dermatophytes are more associated with intense onycholysis and absence of the inflammatory signals. Biofilm seems to be crucial for non-dermatophytes to cause onychomycosis, but not for T. rubrum.
Subject(s)
Onychomycosis , Onychomycosis/microbiology , Onychomycosis/pathology , Nails , Biofilms , TrichophytonABSTRACT
Thermosensitive bioadhesive formulations can display increased retention time, skin permeation, and improve the topical therapy of many drugs. Acne is an inflammatory process triggered by several factors like the proliferation of the bacteria Propionibacterium acnes. Aiming for a new alternative treatment with a natural source, propolis displays great potential due to its antibiotic, anti-inflammatory, and healing properties. This study describes the development of bioadhesive thermoresponsive platform with cellulose derivatives and poloxamer 407 for propolis skin delivery. Propolis ethanolic extract (PES) was added to the formulations with sodium carboxymethylcellulose (CMC) or hydroxypropyl methylcellulose (HPMC) and poloxamer 407 (Polox). The formulations were characterized as rheology, bioadhesion, and mechanical analysis. The selected formulations were investigated as in vitro propolis release, cytotoxicity, ex vivo skin permeation by Fourier Transform Infrared Photoacoustic Spectroscopy, and the activity against P. acnes. Formulations showed suitable sol-gel transition temperature, shear-thinning behavior, and texture profile. CMC presence decreased the cohesiveness and adhesiveness of formulations. Polox/HPMC/PES system displayed less cytotoxicity, modified propolis release governed by anomalous transport, skin permeation, and activity against P. acnes. These results indicate important advantages in the topical treatment of acne and suggest a potential formulation for clinical evaluation.
Subject(s)
Acne Vulgaris , Propolis , Acne Vulgaris/drug therapy , Cellulose , Gels/chemistry , Humans , Hypromellose Derivatives , Poloxamer/chemistryABSTRACT
The search for gold-standard materials for bone regeneration is still a challenge in reconstruction surgery. The ratio between hydroxyapatite (HAp) and ß-tricalcium phosphate (ß-TCP) in biphasic calcium phosphate ceramics (BCPs) is one of the most important factors in osteoinduction promotion and controlled biodegradability, configurating what is currently considered as a possible gold standard material for bone substitution in reconstructive surgery. Exploring the natural genesis of the HAp and ß-TCP phases in fishbones during their postnatal growth, this study developed a biphasic bioceramic obtained from the calcination of Nile tilapia (Oreochromis niloticus) bones as a function of their ages. The natural genesis dynamics of the structural evolution of the ß-TCP and HAp phases were characterized by physicochemical methods, taking into account of the age of the fish and the material processing conditions. Thermal analysis (TGA / DTA) showed complete removal of the organic matter and transitions associated with the transformation of carbonated hydroxyapatite (CDHA) to HAp and ß-TCP phases. After calcination at 900 °C, the material was characterized by: X-ray diffraction (XRD) and refinement by the Rietveld method; Fourier Transform Infrared Spectroscopy with Attenuated Total Reflection (FTIR-ATR); Raman spectroscopy; Scanning Electron Microscopy (SEM) and Flame Atomic Absorption Spectroscopy (FAAS). The analysis allowed identification and quantitative estimate of the variations of the HAp and ß-TCP phases in the formation of the BCPs. The results showed that the decrease in ß-TCP against the increase in the HAp phases is symmetrical to the dynamics of the natural genesis of these phases, surprisingly maintaining the balanced phase proportion even when bones of young fishes were used. The microstructure analysis confirms the observed transformation. In addition, in vivo tests demonstrated the osteoinductive potential of BCP scaffolds implanted in an ectopic site, and their remarkable regenerative functionality, as bone graft, was demonstrated in alveolar bone after tooth extraction. MTT cytotoxicity assay for BCP samples for MC3T3-E1 pre-osteoblasts and L929 fibroblasts cells showed viability equal or higher than 100%. A logistic empirical model is presented to explain the three stages of HAp natural formation with fish age and it is also compared to the fish size evolution.
Subject(s)
Calcium Phosphates , Durapatite , Animals , Bone Regeneration , Calcium Phosphates/chemistry , Calcium Phosphates/pharmacology , Ceramics , Durapatite/chemistry , Hydroxyapatites/chemistryABSTRACT
Species of the Candida genus represent the third most common cause of onychomycosis, the most frequent and difficult to treat nail infection. Onychomycosis has been attributed to fungi organized in biofilm and some natural products have proved promising for its treatment. This study aimed to evaluate the antibiofilm activity of propolis extract (PE) and its by-product (WPE) on 7-day preformed biofilms produced by Candida albicans in polystyrene microplates, as well as in an ex vivo model on human nail fragments. The cytotoxicity and permeation capacity were also assessed. Firstly, multiple parameters were evaluated over 7 days to elucidate the dynamics of biofilm formation by C. albicans. The cell viability and total biomass did not vary much from the beginning; however, days 3 and 4 were crucial in terms of metabolic activity, which was significantly increased, and the levels of extracellular matrix components, wherein proteins and nucleic acids experienced an increase, but polysaccharide levels dropped. Architecturally, one-day biofilm showed a monolayer of organized cells (blastoconidia, hyphae, and pseudohyphae), while in the seven-day biofilm there was a three-dimensional well-structured and complex biofilm. This yeast was also able to form a biofilm on both surfaces of the nail, without an additional nutritional source. Both extracts showed excellent antibiofilm activity against the 7-day preformed biofilm and were not toxic to Vero cells at concentrations compatible with the antifungal and antibiofilm activities. Both extracts permeated the experimentally infected nail, with WPE being more efficient. The results of this study, taken together, reinforce the potential of these natural products, containing propolis, as a safe option for the topical treatment of onychomycosis.
ABSTRACT
BACKGROUND: Fusarium spp. has been considered as an onychomycosis agent, but little is known about the etiopathogenesis of fusarial onychomycosis; thus, the objective of this study was to characterize the fungal-nail interaction and the consequences of the nail infection process by Fusarium oxysporum using the human nail, in an ex vivo model. METHODS: The kinetic of biofilm production and infection by F. oxysporum using the nail as the only nutritional source were evaluated by scanning electron microscopy, number of culturable cells, metabolic activity, characterization of extracellular matrix, spectroscopy and histopathology analyses. RESULTS: After evaluating the biofilm kinetic over 7 days using different parameters and techniques, it was possible to characterize the Fusarium-nail interaction. CONCLUSIONS: This study is a part of a big project aiming to clarify the fusarial pathogenesis and contributes to proving F. oxysporum is able to adapt, grow, develop, and form a biofilm on healthy human nails, which are crucial steps for the invasion process.
Subject(s)
Fusarium , Onychomycosis , Biofilms , Humans , NailsABSTRACT
OBJECTIVES: This study aims to evaluate the opalescence (OP) and color stability of composite resins over a period of 180 days and to compare composite resins' OP with enamel's OP. MATERIALS AND METHODS: Twenty human enamel specimens (5.0 × 0.3 mm) and 9 specimens (10.0 × 1.0 mm) of 10 colors of 4 different composite resins (3 M ESPE, FGM, Ivoclar-Vivadent, Miscerium) and one brand of adhesive (3 M ESPE) were made. The results were obtained by measuring the reflectance and transmittance spectra in the visible region. After baseline measurement, composites and adhesive were analyzed after 2, 7, 30, 60, 120, and 180 days. The Lab color coordinates were used in the calculations of the OP parameter and color differences in the CIELab and CIEDE2000 methods. The data were analyzed statistically. RESULTS: The materials tested showed variation and an increase in OP over time. The OP found for enamel was 18.06 ± 2.99, and some resins showed higher results. There was a strong correlation between the coordinate b*T and the OP over time. Enamel Plus was the only one material that presented no color changes during all periods in both color analyses. Filtek Z350 XT, AT, and BT did not show differences in any time when analyzed by CIELAB. CONCLUSIONS: The OP of most composite resins changed during the period of 180 days and was different from the OP of tooth enamel. In general, composites demonstrated small color changes over the period tested, being this characteristic material dependent. CLINICAL RELEVANCE: Natural teeth present different optical properties. Composite resins restorations should present properties similar to natural teeth and it is important that characteristics like color and opalescence remain stable over time.
Subject(s)
Composite Resins , Iridescence , Color , Dental Enamel , Humans , Longitudinal Studies , Materials TestingABSTRACT
Abstract The therapeutic drugs to treat Herpes simplex virus (HSV) infections have toxic side effects and there has been an emergence of drug-resistant strains. Therefore, the search for new treatments for HSV infections is mounting. In the present study, semi-solid formulations containing a crude hydroethanolic extract (CHE) from Schinus terebinthifolia were developed. Skin irritation, cutaneous permeation, and in vivo therapeutic efficacy of the formulations were investigated. Treatment with the ointment formulations did not result in any signs of skin irritation while the emulsions increased the thickness of the epidermis in Swiss mice. The cutaneous permeation test indicated that the CHE incorporated in the formulations permeated through the skin layers and was present in the epidermis and dermis even 3 h after topical application. In vivo antiviral activity in BALB/c mice treated with the CHE ointments was better than those treated with the CHE emulsions and did not significantly differ from an acyclovir-treated group. Taken together, this suggests that the incorporation of CHE in the ointment may be a potential candidate for the alternative topical treatment of herpetic lesions.