Nanotechnology-Based Dressings for Wound Management.

Wound healing is known to be a complicated and intricate process and commonly classified as chronic or acute. Patients with chronic wounds are of public health concern, and require more attention onto skin lesions, including atopic dermatitis. Despite being a natural process, healing can be impaired by existing chronic de diseases such as diabetes, for example. Recently, wound dressings based in nanotechnology systems have emerged as a viable option to improve the healing process. Current advances in nanotechnology-based systems to release growth factors and bioactive agents represent a great opportunity to develop new therapies for wound treatments. It is essential that healthcare professionals understand the key processes involved in the healing cascade, to maximize care with these patients and minimize the undesirable outcomes of non-healing wounds. Therefore, this review aims to summarize the healing process phases and provide a general overview of dressings based in nanotechnology using biomaterials for the release of active agents in wound site.

Curcumin encapsulation in nanostructures for cancer therapy: A 10-year overview.

Curcumin (CUR) is a phenolic compound present in some herbs, including Curcuma longa Linn. (turmeric rhizome), with a high bioactive capacity and characteristic yellow color. It is mainly used as a spice, although it has been found that CUR has interesting pharmaceutical properties, acting as a natural antioxidant, anti-inflammatory, antimicrobial, and antitumoral agent. Nonetheless, CUR is a hydrophobic compound with low water solubility, poor chemical stability, and fast metabolism, limiting its use as a pharmacological compound. Smart drug delivery systems (DDS) have been used to overcome its low bioavailability and improve its stability. The current work overviews the literature from the past 10 years on the encapsulation of CUR in nanostructured systems, such as micelles, liposomes, niosomes, nanoemulsions, hydrogels, and nanocomplexes, emphasizing its use and ability in cancer therapy. The studies highlighted in this review have shown that these nanoformulations achieved higher solubility, improved tumor cytotoxicity, prolonged CUR release, and reduced side effects, among other interesting advantages.

Polymeric micelles using cholinium-based ionic liquids for the encapsulation and release of hydrophobic drug molecules.

We generated stable amphiphilic copolymer-based polymeric micelles (PMs) with temperature-responsive properties utilizing Pluronic® L35 and a variety of ionic liquids (ILs) to generate different aqueous two-phase micellar systems (ATPMSs). The partitioning of the hydrophobic model compound curcumin (CCM) into the PM-rich phase and the drug delivery capabilities of the PMs were investigated. ATPMSs formed using more hydrophobic ILs (i.e., [Ch][Hex] ≈ [Ch][But] > [Ch][Pro] > [Ch][Ac] ≈ [Ch]Cl) were the most effective in partitioning (KCCM) and recovering (RECRich) CCM into the PM-rich phase (15.2 < KCCM < 22.0 and 90% < RECRich < 95%, respectively). Moreover, using 1.2 M [Ch][But] and 0.2 M [Ch][Hex] ILs yielded higher encapsulation efficiency (EE) (94.1 and 96.0%, respectively) and drug loading (DL) capacity (14.8 and 16.2%, respectively), together with an increase in the average hydrodynamic diameter of the PMs (DH) (42.5 and 45.6 nm, respectively). The CCM-PM formulations were stable at 4.0, 25.0, and 37.0 °C and the release of CCM was faster with the less hydrophobic ILs (i.e., [Ch]Cl and [Ch][Ac]). Furthermore, due to the lower critical solution temperature properties of Pluronic® L35, the PMs exhibit temperature responsiveness at 37.0 °C. In vitro cytotoxicity assays were also performed to determine the potency of CCM-PM formulations, and a 1.8-fold decrease in IC50 values was observed between the CCM-PMs/[Ch][Hex] and CCM-PMs/[Ch]Cl formulations for PC3 cells. The lower IC50 value for the [Ch][Hex] version corresponded to a greater potency compared to the [Ch]Cl version, since a lower concentration of CCM was required to achieve the same therapeutic effect. The ATPMSs investigated in this study serve as a novel platform for Pluronic® L35/PBS buffer (pH 7.4) + IL-based ATPMS development. The unique properties reported here may be useful in applications such as controlled-release drug delivery systems (DDS), encapsulation, and bioseparations.

Can acetylcysteine ameliorate cisplatin-induced toxicities and oxidative stress without decreasing antitumor efficacy? A randomized, double-blind, placebo-controlled trial involving patients with head and neck cancer.

The protective antioxidant activity of acetylcysteine (NAC) against toxicity due to cisplatin has been reported in experimental models; however, its efficacy in patients has not been elucidated. The aim of this study was to investigate the possible protective effect of NAC on cisplatin-induced toxicity and the effect of NAC on clinical response and oxidative stress in patients treated for head and neck cancer. This was a randomized, double-blind, placebo-controlled trial conducted in patients receiving high-dose cisplatin chemotherapy concomitant to radiotherapy. Patients were randomly assigned to groups and received: (a) 600 mg NAC syrup, orally once daily at night for 7 consecutive days or (b) placebo, administered similarly to NAC. Nephro-, oto-, hepato-, myelo-, and gastrointestinal toxicities, clinical responses, and plasma and cellular markers of oxidative stress were evaluated. Fifty-seven patients were included (n = 28, NAC arm; and n = 29, placebo arm). A high prevalence of most types of toxicities was observed after cisplatin chemotherapy; however, the parameters were similar between the two groups. There was a predominance of partial response to treatment. In the cellular and plasmatic oxidative stress analyses, minor differences were observed. Overall, there was no statistically significant difference between the groups for all outcomes. These findings show that low-dose oral NAC does not protect patients with head and neck cancer from cisplatin-induced toxicities and oxidative stress. The antitumor efficacy of cisplatin was apparently not impaired by NAC.

Pharmacist interventions in high-risk obstetric inpatient unit: a medication safety issue.

OBJECTIVES: The aim of this study was to report number, type and severity of prescribing errors and pharmacist interventions in high-risk pregnant and postpartum women. DESIGN: A prospective cross-sectional, observational study. SETTING: A high-risk obstetric inpatient unit of a Women's Hospital in Brazil. PARTICIPANTS: About 1826 electronic prescriptions for 549 women in the high-risk obstetrics inpatient unit were included. INTERVENTIONS: When the pharmacist detected potential prescribing errors, interventions were suggested. MAIN OUTCOME MEASURES: Prescriptions were evaluated by clinical pharmacist to identify the type, frequency and severity of prescribing errors and rate of clinical pharmacist intervention acceptance in a high-risk obstetric inpatient. RESULTS: A total of 1826 prescriptions were reviewed with 128 errors (7.0%). The most frequent errors were drug interaction (43.8%), incorrect frequency (21.5%) and improper dose (13.1%). One-hundred and sixty-eight interventions were made by pharmacists, 98.8% of which were accepted by prescribers. Higher maternal age (OR 1.0 (95%CI 1.0-1.1)), higher number of prescribed medications (OR 1.2 (95%CI 1.1-1.3)), obstetric conditions (OR 2.2 (95%CI 1.4-3.3)) and non-breastfeeding postpartum women (OR 3.9 (95% CI 2.5-6.1)) were the independent factors associated with prescribing errors identified through multivariate analysis. CONCLUSIONS: The most common prescription errors related to drug interactions, incorrect frequency and higher number of prescribed medications. The rate of pharmacist acceptance intervention was high.

Poly(N-Isopropylacrylamide)-co-Acrylamide Hydrogels for the Controlled Release of Bromelain from Agroindustrial Residues of Ananas comosus.

This works reports the purification of bromelain extracted from Ananas comosus industrial residues by ethanol purification, its partial characterization from the crude extract as well as the ethanol purified enzyme, and its application onto poly(N-isopropylacrylamide)-co-acrylamide hydrogels. Bromelain was recovered within the 30-70 % ethanol fraction, which achieved a purification factor of 3.12-fold, and yielded more than 90 % of its initial activity. The resulting purified bromelain contained more than 360 U · mg(-1), with a maximum working temperature of 60 °C and pH of 8.0. Poly(N-isopropylacrylamide)-co-acrylamide hydrogels presented a swelling rate of 125 %, which was capable of loading 56 % of bromelain from the solution, and was able to release up to 91 % of the retained bromelain. Ethanol precipitation is suitable for bromelain recovery and application onto poly(N-isopropylacrylamide)-co-acrylamide hydrogels based on its processing time and the applied ethanol prices.

Evaluation of the cytotoxicity and phototoxicity of Caryocar brasiliense supercritical carbon dioxide extract.

BACKGROUND: Caryocar brasiliense Camb (Pequi) is a typical Brazilian Cerrado fruit tree. Its fruit is used as a vitamin source for culinary purposes and as a source of oil for the manufacture of cosmetics. C. brasiliense supercritical CO2 extracts exhibit antimicrobial activity against the bacteria Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus and also possess antioxidant activity. This study was designed to evaluate the in vitro cytotoxicity and phototoxicity of the supercritical CO2 extract obtained from the leaves of this species. METHODS: In vitro cytotoxicity and phototoxicity of C. brasiliense supercritical CO2 extracts were assessed using a tetrazolium-based colorimetric assay (XTT) and Neutral Red methods. RESULTS: We found that the C. brasiliense (Pequi) extract obtained by supercritical CO2 extraction did not present cytotoxic and phototoxic hazards. CONCLUSIONS: This finding suggests that the extract may be useful for the development of cosmetic and/or pharmaceutical products.

Caryocar brasiliense supercritical CO2 extract possesses antimicrobial and antioxidant properties useful for personal care products.

BACKGROUND: The cosmetic and pharmaceutical industries have an increasing interest in replacing synthetic antimicrobials in dermatological products due to increased microbial resistance to conventional antimicrobial agents. Pequi (Caryocar brasiliense) is a native fruit tree of the Brazilian Cerrado, specifically used in cosmetics, in the food industry, and for medicinal purposes. Leishmanicidal and antifungal activities have been reported previously. This study was designed to evaluate the antimicrobial and antioxidant activities of a C. brasiliense extract obtained by supercritical CO2 extraction. METHODS: The minimum inhibitory concentrations (MICs) against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus were determined by the classical microdilution method. Antiseptic activity against these organisms was evaluated by the plate diffusion method. The antioxidant potential of the extract was evaluated using a method based on the oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS). The extract's chemical profile was analyzed for the presence of alkaloids, saponins, anthraquinones, steroids, tannins, flavonoids, and phenolic compounds according to standard colorimetric methods. RESULTS: The C. brasiliense supercritical CO2 extract exhibits antimicrobial activity against all bacteria tested. It also possesses antioxidant activity, when compared to a vitamin E standard. CONCLUSIONS: The C. brasiliense supercritical CO2 extract may be useful for the development of personal care products, primarily for antiseptic skin products that inactivate, reduce, prevent, or arrest the growth of microorganisms with the inherent intent to mitigate or prevent disease as well as products that minimize damage caused by free radicals.

Citrate and phosphate influence on green fluorescent protein thermal stability.

Protein structure and function can be regulated by no specific interactions, such as ionic interactions in the presence of salts. Green fluorescent protein (GFP) shows remarkable structural stability and high fluorescence; its stability can be directly related to its fluorescence output, among other characteristics. GFP is stable under increasing temperatures, and its thermal denaturation is highly reproducible. The aim of this study was to evaluate the thermal stability of GFP in the presence of different salts at several concentrations and exposed to constant temperatures, in a range of 70-95°C. Thermal stability was expressed in decimal reduction time. It was observed that the D-values obtained were higher in the presence of citrate and phosphate, when compared with that obtained in their absence, indicating that these salts stabilized the protein against thermal denaturation.

LPS removal from an E. coli fermentation broth using aqueous two-phase micellar system.

In biotechnology, endotoxin (LPS) removal from recombinant proteins is a critical and challenging step in the preparation of injectable therapeutics, as endotoxin is a natural component of bacterial expression systems widely used to manufacture therapeutic proteins. The viability of large-scale industrial production of recombinant biomolecules of pharmaceutical interest significantly depends on the separation and purification techniques used. The aim of this work was to evaluate the use of aqueous two-phase micellar system (ATPMS) for endotoxin removal from preparations containing recombinant proteins of pharmaceutical interest, such as green fluorescent protein (GFPuv). Partition assays were carried out initially using pure LPS, and afterwards in the presence of E. coli cell lysate. The ATPMS technology proved to be effective in GFPuv recovery, preferentially into the micelle-poor phase (K(GFPuv) < 1.00), and LPS removal into the micelle-rich phase (%REM(LPS) > 98.00%). Therefore, this system can be exploited as the first step for purification in biotechnology processes for removal of higher LPS concentrations.

Effect of polyethylene glycol on the thermal stability of green fluorescent protein.

Green fluorescent protein (GFP) shows remarkable structural stability and high fluorescence; its stability can be directly related to its fluorescence output, among other characteristics. GFP is stable under increasing temperatures, and its thermal denaturation is highly reproducible. Some polymers, such as polyethylene glycol, are often used as modifiers of characteristics of biological macromolecules, to improve the biochemical activity and stability of proteins or drug bioavailability. The aim of this study was to evaluate the thermal stability of GFP in the presence of different PEG molar weights at several concentrations and exposed to constant temperatures, in a range of 70-95 degrees C. Thermal stability was expressed in decimal reduction time. It was observed that the D-values obtained were almost constant for temperatures of 85, 90, and 95 degrees C, despite the PEG concentration or molar weight studied. Even though PEG can stabilize proteins, only at 75 degrees C, PEG 600 and 4,000 g/mol stabilized GFP.

Methods of endotoxin removal from biological preparations: a review.

PURPOSE: Endotoxins, also called lipopolysaccharides (LPS), are major contaminants found in commercially available proteins or biologically active substances, which often complicate study of the biological effects of the main ingredient. The presence of small amounts of endotoxin in recombinant protein preparations can cause side effects in host organism such as endotoxin shock, tissue injury, and even death. Due to these reactions, it is essential to remove endotoxins from drugs, injectables, and other biological and pharmaceutical products. An overview of this subject is provided by this article. METHODS: An extensive review of literature with regard to methods for removal of endotoxin from biotechnological preparations was carried out. RESULTS: A short history of endotoxin is presented first. This is followed by a review of chemical and physical properties of endotoxin and its pathophysiological effects when the body is exposed to LPS excessively or systemically. The techniques of endotoxin determination and interaction of endotoxin with proteins is also presented, taking into consideration the established techniques as well as the state of the art technology in this field. A review of techniques of endotoxin removal from biotechnological preparations is described, emphasizing how endotoxin removal can be carried out in an economical way based on a number of processes discussed in the literature (e.g., adsorption, two-phase partitioning, ultrafiltration and chromatography). Different methods are mentioned with relatively high protein recoveries; however, special attention is given to two-phase aqueous micellar systems, which are valuable tools for endotoxin removal from pharmaceutical proteins on a small scale because they provide a mild environment for biological materials. CONCLUSIONS: Efficient and cost-effective removal of endotoxins from pharmaceutical and biotechnology preparations is challenging. Despite development of novel methods, such as the two-phase aqueous micellar systems, in recent years, more research is needed in this field.

Stability of green fluorescent protein (GFP) in chlorine solutions of varying pH.

Green fluorescent protein (GFP) is an excellent biosensor as a result of its ability to be easily monitored in a wide variety of applications. Enzymes and proteins have been used as biological indicators to evaluate the immediate efficacy of industrial procedures, such as blanching, pasteurization, and disinfection treatments, as well as to monitor the satisfactory preservation of a product subjected to disinfection or sterilization. The purpose of this work was to study GFP stability in chlorinated water for injection (WFI) and chlorinated buffered solutions at various pH ranges, with and without agitation, to evaluate the exposure time required for chlorine to decrease 90% of its fluorescence intensity (decimal reduction time, D-value, min, 25 degrees C). Fluorescence intensity (Ex/Emmax = 394/509 nm) was measured immediately after the addition of GFP (8.0-9.0 microg/mL) into buffered or unbuffered chlorine solutions with or without constant stirring. With solutions constantly stirred, GFP fluorescence decreased abruptly on contact with chlorine in concentrations greater than 150 ppm, with D-values between 1.3 min (147 ppm chlorine) and 1.7 min (183 ppm chlorine). In phosphate buffered chlorine solutions (pH = 7.15 +/- 0.08), GFP retained its structure between 52 and 94 ppm, but protein stability decreased 10-fold when exposed to 110 ppm chlorine. The recovery of GFP fluorescence intensity due to renaturation was observed between 30 and 100 ppm chlorine in WFI (final pH = 11.01 +/- 0.23) without stirring. Stirring enhanced the contact between GFP and chlorine throughout the assay and provided a more accurate D-value evaluation. GFP performed as a suitable fluorescent marker for monitoring disinfection effectiveness.

Chemical resistance of the gram-negative bacteria to different sanitizers in a water purification system.

BACKGROUND: Purified water for pharmaceutical purposes must be free of microbial contamination and pyrogens. Even with the additional sanitary and disinfecting treatments applied to the system (sequential operational stages), Pseudomonas aeruginosa, Pseudomonas fluorescens, Pseudomonas alcaligenes, Pseudomonas picketti, Flavobacterium aureum, Acinetobacter lowffi and Pseudomonas diminuta were isolated and identified from a thirteen-stage purification system. To evaluate the efficacy of the chemical agents used in the disinfecting process along with those used to adjust chemical characteristics of the system, over the identified bacteria, the kinetic parameter of killing time (D-value) necessary to inactivate 90% of the initial bioburden (decimal reduction time) was experimentally determined. METHODS: Pseudomonas aeruginosa, Pseudomonas fluorescens, Pseudomonas alcaligenes, Pseudomonas picketti, Flavobacterium aureum, Acinetobacter lowffi and Pseudomonas diminuta were called in house (wild) bacteria. Pseudomonas diminuta ATCC 11568, Pseudomonas alcaligenes INCQS , Pseudomonas aeruginosa ATCC 15442, Pseudomonas fluorescens ATCC 3178, Pseudomonas picketti ATCC 5031, Bacillus subtilis ATCC 937 and Escherichia coli ATCC 25922 were used as 'standard' bacteria to evaluate resistance at 25 degrees C against either 0.5% citric acid, 0.5% hydrochloric acid, 70% ethanol, 0.5% sodium bisulfite, 0.4% sodium hydroxide, 0.5% sodium hypochlorite, or a mixture of 2.2% hydrogen peroxide (H2O2) and 0.45% peracetic acid. RESULTS: The efficacy of the sanitizers varied with concentration and contact time to reduce decimal logarithmic (log10) population (n cycles). To kill 90% of the initial population (or one log10 cycle), the necessary time (D-value) was for P. aeruginosa into: (i) 0.5% citric acid, D = 3.8 min; (ii) 0.5% hydrochloric acid, D = 6.9 min; (iii) 70% ethanol, D = 9.7 min; (iv) 0.5% sodium bisulfite, D = 5.3 min; (v) 0.4% sodium hydroxide, D = 14.2 min; (vi) 0.5% sodium hypochlorite, D = 7.9 min; (vii) mixture of hydrogen peroxide (2.2%) plus peracetic acid (0.45%), D = 5.5 min. CONCLUSION: The contact time of 180 min of the system with the mixture of H2O2+ peracetic acid, a total theoretical reduction of 6 log10 cycles was attained in the water purified storage tank and distribution loop. The contact time between the water purification system (WPS) and the sanitary agents should be reviewed to reach sufficient bioburden reduction (over 6 log10).

Affinity-tagged green fluorescent protein (GFP) extraction from a clarified E. coli cell lysate using a two-phase aqueous micellar system.

Green fluorescent protein (GFP) has been proposed as an ideal choice for a protein-based biological indicator for use in the validation of decontamination or disinfection treatments. In this article, we present a potentially scalable and cost-effective way to purify recombinant GFP, produced by fermentation in Escherichia coli, by affinity-enhanced extraction in a two-phase aqueous micellar system. Affinity-enhanced partitioning, which improves the specificity and yield of the target protein by specific bioaffinity interactions, has been demonstrated. A novel affinity tag, family 9 carbohydrate-binding module (CBM9) is fused to GFP, and the resulting fusion protein is affinity-extracted in a decyl beta-D-glucopyranoside (C10G1) two-phase aqueous micellar system. In this system, C10G1 acts as phase forming and as affinity surfactant. We will further demonstrate the implementation of this concept to attain partial recovery of affinity-tagged GFP from a clarified E. coli cell lysate, including the simultaneous removal of other contaminating proteins. The cell lysate was partitioned at three levels of dilution (5x, 10x, and 40x). Irrespective of the dilution level, CBM9-GFP was found to partition preferentially to the micelle-rich phase, with the same partition coefficient value as that found in the absence of the cell lysate. The host cell proteins from the cell lysate were found to partition preferentially to the micelle-poor phase, where they experience less excluded-volume interactions. The demonstration of proof-of-principle of the direct affinity-enhanced extraction of CBM9-GFP from the cell lysate represents an important first step towards developing a cost-effective separation method for GFP, and more generally, for other proteins of interest.