ABSTRACT
BACKGROUND: Children from low-socioeconomic backgrounds exhibit more behavioural difficulties than those from more affluent families. Influential theoretical models specify family stress and child characteristics as mediating this effect. These accounts, however, have often been based on cross-sectional data or longitudinal analyses that do not capture all potential pathways, and therefore may not provide good policy guidance. METHODS: In a UK representative sample of 2399 children aged 5-15, we tested mediation of the effect of household income on parent and teacher reports of conduct problems (CP) via unhealthy family functioning, poor parental mental health, stressful life events, child physical health and reading ability. We applied cross-lagged longitudinal mediation models which allowed for testing of reciprocal effects whereby the hypothesised mediators were modelled as outcomes as well as predictors of CP. RESULTS: We found the predicted significant longitudinal effect of income on CP, but no evidence that it was mediated by the child and family factors included in the study. Instead, we found significant indirect paths from income to parental mental health, child physical health and stressful life events that were transmitted via child CP. CONCLUSION: The results confirm that income is associated with change in CP but do not support models that suggest this effect is transmitted via unhealthy family functioning, parental mental health, child physical health, stressful life events or reading difficulties. Instead, the results highlight that child CP may be a mediator of social inequalities in family psychosocial functioning.
Subject(s)
Income , Mental Health , Child , Humans , Adolescent , Cross-Sectional Studies , Socioeconomic Factors , Surveys and Questionnaires , Parents/psychologyABSTRACT
BACKGROUND: Patients with advanced biliary tract cancer who progress on first-line therapy have limited treatment options. The TreeTopp study assessed varlitinib, a reversible small molecule pan-human epidermal growth factor receptor inhibitor, plus capecitabine in previously treated advanced biliary tract cancer. PATIENTS AND METHODS: This global, double-blind, randomized, placebo-controlled phase II study enrolled patients with confirmed unresectable or metastatic biliary tract cancer and disease progression after one prior line of gemcitabine-containing chemotherapy. Patients received oral varlitinib 300 mg or placebo twice daily (b.i.d.) for 21 days, plus oral capecitabine 1000 mg/m2 b.i.d. on days 1-14, in 21-day treatment cycles. Co-primary endpoints were objective response rate and progression-free survival (PFS) according to RECIST v1.1 by Independent Central Review. RESULTS: In total, 127 patients received varlitinib plus capecitabine (n = 64) or placebo plus capecitabine (n = 63). The objective response rate was 9.4% with varlitinib plus capecitabine versus 4.8% with capecitabine alone (odds ratio 2.28; P = 0.42). Median PFS was 2.83 versus 2.79 months [hazard ratio (HR), 0.90; 95% confidence interval (CI), 0.60-1.37; P = 0.63] and overall survival was 7.8 versus 7.5 months (HR, 1.11; 95% CI, 0.69-1.79; P = 0.66), respectively. In a subgroup analysis, the addition of varlitinib appeared to provide a PFS benefit in female patients (median, 4.1 versus 2.8 months; HR, 0.59; 95% CI, 0.28-1.23) and those with gallbladder cancer (median, 2.9 versus 1.6 months; HR, 0.55; 95% CI, 0.26-1.19). Grade ≥3 treatment-emergent adverse events were reported in 65.6% of patients receiving varlitinib plus capecitabine versus 58.7% of those receiving capecitabine alone. CONCLUSIONS: In patients with advanced biliary tract cancer, second-line treatment with varlitinib plus capecitabine was well tolerated but did not improve efficacy versus capecitabine alone. A PFS benefit was suggested in female patients and those with gallbladder cancer.
Subject(s)
Antineoplastic Combined Chemotherapy Protocols , Biliary Tract Neoplasms , Antineoplastic Combined Chemotherapy Protocols/adverse effects , Biliary Tract Neoplasms/drug therapy , Biliary Tract Neoplasms/pathology , Capecitabine/pharmacology , Capecitabine/therapeutic use , Double-Blind Method , Female , Humans , Progression-Free SurvivalABSTRACT
Current climate projections for the Great Plains of North America indicate markedly increased air temperatures by the end of the current century. Because the Great Plains contains >80,000 intermittent wetlands that serve as irreplaceable wildlife habitat, this projected warming may have profound effects throughout a continental-scale trophic network. However, little research has been done to determine how projected warming may affect the growth, development, or survival of even common species in this region. We conducted laboratory warming experiments, using an abundant amphibious predatory insect, Enallagma civile (Hagen, 1861), as a model organism, to determine whether projected warming may affect development or survival. Eggs were collected and reared under four water temperature regimes representing current (26°C) and projected future conditions (32, 38, and 41°C). Nymph body size after each molt, development rate, and deaths were recorded. Elevated water temperatures were found to significantly affect the survivorship of E. civile eggs and nymphs as well as adult body size at emergence: an increase in temperature incurred a decrease in survival and size. Nymphs in the two hotter treatments were smaller and had low survivorship whereas individuals in the cooler temperatures generally survived to adulthood and were larger. Nymphs reared at 32°C experienced accelerated ontogenetic development compared with the other temperatures, going from egg to adult in 26 d. Projected elevated temperatures may, thus, be both advantageous and detrimental, causing concern for aquatic invertebrates in this region in the future.
Subject(s)
Climate Change , Odonata , Animals , North America , Ovum , Temperature , WaterABSTRACT
BACKGROUND/OBJECTIVES: An increased risk of mortality and cardiovascular disease (CVD) is observed in people with chronic kidney disease (CKD) even in early stages. Dietary sodium intake has been associated with important CVD and CKD progression risk factors such as hypertension and proteinuria in this population. We aimed to investigate the relationship between sodium intake and CVD or CKD progression risk factors in a large cohort of patients with CKD stage 3 recruited from primary care. SUBJECTS/METHODS: A total of 1733 patients with previous estimated glomerular filtration rate (eGFR) of 30-59 ml/min/1.73m(2), with a mean age 72.9±9.0 years, were recruited from 32 general practices in primary care in England. Medical history was obtained and participants underwent clinical assessment, urine and serum biochemistry testing. Sodium intake was estimated from three early-morning urine specimens using an equation validated for this study population. RESULTS: Sixty percent of participants who had estimated sodium intake above recommendation (>100 mmol/day or 6 g salt/day) also had higher diastolic blood pressure, mean arterial pressure (MAP), urinary albumin-to-creatinine ratio, high-sensitive C-reactive protein and uric acid and used a greater number of anti-hypertensive drugs. In multivariable regression analysis, excessive sodium intake was an independent predictor of MAP (B=1.57, 95% confidence interval (CI) 0.41-2.72; P=0.008) and albuminuria (B=1.35, 95% CI 1.02-1.79; P=0.03). CONCLUSIONS: High sodium intake was associated with CVD and CKD progression risk factors in patients with predominantly early stages of CKD followed up in primary care. This suggests that dietary sodium intake could afffect CVD risk even in early or mild CKD. Intervention studies are warranted to investigate the potential benefit of dietary advice to reduce sodium intake in this population.
Subject(s)
Cardiovascular Diseases/etiology , Kidney Failure, Chronic/etiology , Sodium, Dietary/poisoning , Aged , Aged, 80 and over , Antihypertensive Agents/therapeutic use , Cardiovascular Diseases/epidemiology , Cohort Studies , Cross-Sectional Studies , Disease Progression , England/epidemiology , Female , Humans , Hypertension/drug therapy , Hypertension/epidemiology , Hypertension/etiology , Incidence , Inflammation Mediators/blood , Kidney Failure, Chronic/blood , Kidney Failure, Chronic/physiopathology , Kidney Failure, Chronic/urine , Male , Primary Health Care , Prospective Studies , Proteinuria/epidemiology , Proteinuria/etiology , Risk Factors , Severity of Illness Index , Sodium/urineABSTRACT
Over the past decade, the increasing availability of the World Wide Web has held out the possibility that the efficiency of scientific measurements could be enhanced in cases where experiments were being conducted at distant facilities. Examples of early successes have included X-ray diffraction (XRD) experimental measurements of protein crystal structures at synchrotrons and access to scanning electron microscopy (SEM) and NMR facilities by users from institutions that do not possess such advanced capabilities. Experimental control, visual contact, and receipt of results has used some form of X forwarding and/or VNC (virtual network computing) software that transfers the screen image of a server at the experimental site to that of the users' home site. A more recent development is a web services platform called Science Studio that provides teams of scientists with secure links to experiments at one or more advanced research facilities. The software provides a widely distributed team with a set of controls and screens to operate, observe, and record essential parts of the experiment. As well, Science Studio provides high speed network access to computing resources to process the large data sets that are often involved in complex experiments. The simple web browser and the rapid transfer of experimental data to a processing site allow efficient use of the facility and assist decision making during the acquisition of the experimental results. The software provides users with a comprehensive overview and record of all parts of the experimental process. A prototype network is described involving X-ray beamlines at two different synchrotrons and an SEM facility. An online parallel processing facility has been developed that analyzes the data in near-real time using stream processing. Science Studio and can be expanded to include many other analytical applications, providing teams of users with rapid access to processed results along with the means for detailed discussion of their significance.
ABSTRACT
Numerical and computational modelling of flow and pollutant dynamics in urban drainage systems is becoming more and more integral to planning and design. The main aim of integrated flow and pollutant models is to quantify the efficiency of different measures at reducing the amount of pollutants discharged into receiving water bodies and minimise the consequent negative water quality impact. The open source toolbox CITY DRAIN developed in the Matlab/Simulink environment, which was designed for integrated modelling of urban drainage systems, is used in this work. The goal in this study was to implement and test computational routines for representing sediment and pollutant loads in order to evaluate catchment surface pollution. Tested models estimate the accumulation, erosion and transport of pollutants--aggregately--on urban surfaces and in sewers. The toolbox now includes mathematical formulations for accumulation of pollutants during dry weather period and their wash-off during rainfall events. The experimental data acquired in a previous research project carried out by the Environmental Engineering Research Centre (CIIA) at the Universidad de los Andes in Bogotá (Colombia) was used for the calibration of the models. Different numerical approaches were tested for their ability to calibrate to the sediment transport conditions. Initial results indicate, when there is more than one peak during the rainfall event duration, wash-off processes probably can be better represented using a model based on the flow instead of the rainfall intensity. Additionally, it was observed that using more detailed models (compared with an instantaneous approach) for representing pollutant accumulation do not necessarily lead to better results.
Subject(s)
Computer Simulation , Geologic Sediments , Models, Theoretical , Water Movements , Water Pollutants, Chemical , Cities , Colombia , Rivers , Sanitary Engineering , Time Factors , Uncertainty , Water Pollutants , Water Pollution/prevention & controlABSTRACT
Liquid 1-decanethiol was confined on an atomic force microscope (AFM) tip apex and the effect was investigated by measuring amplitude-distance curves in dynamic force mode. Within the working distance in the dynamic force mode AFM, the thiol showed strong interactions bridging between a gold-coated probe tip and a gold-coated Si substrate, resulting in unstable amplitude and noisy AFM images. We show that under such a situation, the amplitude change is dominated by the extra forces induced by the active material loaded on the tip apex, overwhelming the amplitude change caused by the geometry of the sample surface, thus resulting in noise in the image the tip collects. We also show that such a contaminant may be removed from the apex by pushing the tip into a material soft enough to avoid damage to the tip.
ABSTRACT
In this paper, time-of-flight secondary ion mass spectrometry (ToF-SIMS) under static conditions was used to investigate self-assembled monolayers (SAMs) of octadecylphosphonic acid (OPA) formed on freshly cleaved muscovite mica substrates. The coverage of OPA on mica ranged from 20 to 100%, with a film thickness of 1.7+/-0.2 nm, which was determined by atomic force microscopy (AFM) imaging. The relative intensity of the specific secondary ion species associated with the OPA and with the exposed mica substrate exhibited good correlation with surface coverage. An excellent correlation was also observed (R2=0.98) between the relative SIMS [OPA-H]- intensity and the surface carbon concentration (OPA C 1s, in atomic %) from XPS at the prescribed surface coverage. The observation of positive and negative OPA molecular attachment of secondary ions involving the substrate species is discussed in terms of the chemical affinity of the OPA phosphonate headgroup for the cleaved mica surface as well as the sampling depth. In addition, the OPA molecular attachment species formed with the potassium ions on the cleaved mica substrate dominated the positive secondary ion mass spectrum in the high-mass range. A temperature-dependent, ToF-SIMS study employing in situ heating of a 100% coverage OPA monolayer revealed that the molecules begin to diffuse above approximately 80 degrees C, resulting in a decrease in the relative secondary ion yield of the OPA-specific secondary ions. This observation is hypothesized to be due to a decrease in the effective coverage of the substrate by the OPA molecules, which in turn could be due to the formation of multilayers upon heating in an effort to minimize the energy of the system. The interesting behavior of the novel OPA dimer species as a function of temperature is also reported. It was observed that the relative intensity of OPA and the mica-specific secondary ion peak intensities to that of Si (mica substrate) provides an effective means to estimate the change in coverage at elevated temperatures.
ABSTRACT
We describe a simple experimental approach for delivering self-assembled monolayers (SAMs) of octadecylphosphonic acid (OPA) on many oxide surfaces using a nonpolar medium with a dielectric constant around 4 (e.g., trichloroethylene). This approach readily results in the formation of full-coverage OPA SAMs on a wide variety of oxide surfaces including cleaved mica, Si wafer, quartz, and aluminum. Especially, the availability of delivering full-coverage OPA SAM on a Si wafer is unique, as no OPA SAMs at all could be formed on a Si wafer when using a polar OPA solution. The reason a nonpolar solvent is superior lies in the very fact that the hydrophilic OPA headgroup tends to escape from the nonpolar solution and is thus enriched at the medium-air interface. It is these OPA headgroups seeking a hydrophilic surface that make possible the well-controlled OPA monolayer on an oxide surface.
ABSTRACT
As determined by scratch tests, self-assembled monolayers (SAMs) of octadecylphosphonic acid (OPA) on a muscovite mica substrate were found to be mechanically robust and to serve as a lubricant to protect the underlying mica substrate. For comparison purposes, three polymer films were subjected to scratch tests under the same conditions. The scratch tests were conducted using a diamond-tipped stylus, and the resultant scratches were examined using atomic force microscopy. The excellent mechanical strength of OPA SAMs is supported by analysis with time-of-flight secondary ion mass spectrometry, which suggests that the headgroup of the OPA is strongly bonded to the substrate atoms. The molecular lubrication provided by OPA SAMs suggests that the interaction between the headgroup and the substrate is sufficiently strong to endure significant shear force and that the hydrocarbon chains are able to dissipate shear energy.
ABSTRACT
The larger black flour beetle, Cynaeus angustus (LeConte) (Coleoptera: Tenebrionidae), is an agricultural and home nuisance pest in North America. In the Southern High Plains of Texas, the larger black flour beetle is associated with cotton gin trash, by-products of cotton ginning that are field stored in large piles for economic reasons. Larger black flour beetle overwinter in gin trash piles but may disperse by the millions in summer and autumn, entering houses as far as 2 km away where they cause distress to homeowners. Because > 1.2 billion kg of gin trash is produced annually in Texas alone, the potential consequences of the larger black flour beetle are enormous. We conducted a field experiment that evaluated the efficacy of diatomaceous earth (DE) on the abundance of the larger black flour beetle in gin trash. There were no significant differences in numbers of larger black flour beetle among treatments and controls (mean number of adults summed over time: controls = 115.41, layered treatment = 87.60, top and bottom treatment = 96.50, bottom treatment = 115.16). There were sufficient numbers of beetles in treated piles to still pose a potential home nuisance problem, likely because the moisture content of field-stored gin trash is too high for DE to work effectively. Therefore, treating cotton gin trash with diatomaceous earth will probably be unable to prevent home infestations of larger black flour beetle. Location within a gin trash pile and season influenced pest numbers, which has implications for long-term field storage of cotton gin trash.
Subject(s)
Diatomaceous Earth , Gossypium , Insect Control/methods , Tenebrio , Animals , Industrial Waste , SeasonsSubject(s)
Face/surgery , Facial Bones/surgery , Plastic Surgery Procedures/methods , Adult , Female , Humans , Male , Prostheses and ImplantsABSTRACT
Principal component analysis (PCA) is a statistical method used to find combinations of variables or factors that describe the most important trends in the data. PCA has been combined with time-of-flight secondary ion mass spectrometry (TOF-SIMS) data to extract new information and find relations between species contained in complex systems. Monolayers of dipalmitoylphosphatidylcholine alone and mixed with palmitoyloleoylphosphatidylglycerol prepared using the Langmuir-Blodgett technique are discussed. PCA software provides image scores and corresponding loadings for each significant principal component. Image plots of the scores show the spatial distribution and intensity of the species defined by the loading plots (mass spectral features). The intensity and resolution of the image scores can result in substantial improvement over that of the regular TOF-SIMS images especially when static conditions are used for small analysis areas. Also, some of the effects of topography and matrix in the images can be removed, allowing for a better presentation of chemical variations.
Subject(s)
Physicians/history , Sculpture/history , Europe , History, 18th Century , History, 19th Century , History, 20th Century , Humans , New Zealand , United StatesSubject(s)
Family Practice/history , History, 17th Century , History, 18th Century , Jamaica , London , SculptureABSTRACT
Wilson disease (WD) is caused by mutations in the ATP7B gene. The diagnosis is based on clinical and biochemical criteria but these are increasingly recognized to have low sensitivity. Genetic diagnosis is considered impractical due to the large coding region of the ATP7B gene and extreme diversity of mutations. We assessed the feasibility and utility of genetic diagnosis in WD. The coding region of the ATP7B gene was scanned by single-stranded conformation polymorphism (SSCP) analysis in 6 cases in whom the diagnosis of WD was uncertain. In addition, we attempted molecular diagnosis in 26 WD patients of similar ethnicity but variable disease manifestations. In 6 individuals in whom the biochemical/clinical diagnosis was uncertain, DNA analyses were useful for assigning their status with respect to WD. Molecular diagnosis identified presymptomatic individuals in families affected by WD and assigned heterozygote carrier or wild-type status to individuals previously diagnosed as affected. In 26 WD patients, 92% of disease alleles were identified. The most common mutations were H1069Q, L936X, and 2532delA representing 48, 10, and 8% of disease alleles, respectively. Three novel mutations were identified: Q898R, 3061(-1)g --> a, and 3972insC. Genetic diagnosis is feasible for WD. Greater application of molecular diagnosis should enable an appreciation of the full spectrum of WD phenotype that is not possible with currently available diagnostic criteria.
Subject(s)
Adenosine Triphosphatases/genetics , Carrier Proteins/genetics , Cation Transport Proteins , Hepatolenticular Degeneration , Hepatolenticular Degeneration/diagnosis , Adolescent , Adult , Child , Child, Preschool , Copper-Transporting ATPases , Ethnicity/genetics , Female , Hepatolenticular Degeneration/genetics , Heterozygote , Humans , Male , Mutation , Polymorphism, Single-Stranded Conformational , Sequence Analysis, DNASubject(s)
Military Medicine/history , History, 18th Century , History, 19th Century , Russia , ScotlandABSTRACT
Fifty-one consecutive patients with chronic liver disease (CLD) underwent investigations of their iron status (full blood count, serum iron [Fe], total iron binding capacity [TIBC], transferrin saturation [TS], serum ferritin and serum soluble transferrin receptor [sTfR] level). Twenty-six patients were anaemic; 12 patients had iron deficiency, and 10 had iron deficiency anaemia (IDA). The median (range) sTfR in the IDA patients was 16.6 (11.2-24.8) mg/l. compared with 6.6 mg/l (11.2-24.8) in the 16 patients with anaemia due to other causes (P = 0.01). The sensitivity of sTfR for diagnosing iron deficiency in CLD was 91.6% (100% if only anaemic patients are included) and the specificity was 84.6%. Patients with haemolysis and recent blood loss may have falsely elevated sTfR levels. The results suggest that the sTfR is as useful as serum ferritin in identifying a potentially treatable cause of anaemia in CLD.