ABSTRACT
The mining and metallurgical industry represents one of the leading causes of environmental pollution. In this context, the optimization of mineral waste management and the efficient extraction of metals of interest becomes an imperative priority for a sustainable future. Microorganisms such as Acidithiobacillus thiooxidans have represented a sustainable and economical alternative in recent years due to their capacity for environmental remediation in bioleaching processes because of their sulfur-oxidizing capacity and sulfuric acid generation. However, its use has been limited due to the reluctance of mine operators because of the constant reproduction of the bacterial culture in suitable media and the care that this entails. In this work, the central objective was to evaluate the functional characteristics of A. thiooxidans, microencapsulated and stored at room temperature for three years in vacuum bags, using a spray drying process with gum arabic as a wall vector. Growth kinetics showed a survival of 80 ± 0.52% after this long period of storage. Also, a qualitative fluorescence technique with a 5-cyano-2-3 ditolyl tetrazolium (CTC) marker was used to determine the respiratory activity of the microorganisms as soon as it was resuspended. On the other hand, the consumption of resuspended sulfur was evaluated to corroborate the correct metabolic functioning of the bacteria, with results of up to 50% sulfur reduction in 16 days and sulfate generation of 513.85 ± 0.4387 ppm and 524.15 ± 0.567 ppm for microencapsulated and non-microencapsulated cultures, respectively. These results demonstrate the success after three years of the microencapsulation process and give guidelines for its possible application in the mining-metallurgical industry.
Subject(s)
Acidithiobacillus thiooxidans , Gum Arabic , Mining , Acidithiobacillus thiooxidans/metabolism , Acidithiobacillus thiooxidans/growth & development , Gum Arabic/chemistry , Spray Drying , Biotechnology/methods , Sulfur/metabolismABSTRACT
OBJECTIVES: This study compared, retrospectively, the incidence of clinical errors and effects on treatment outcomes, when students were exposed to two different instrumentation techniques: a hybrid rotary technique (HYB), consisting of both hand instrumentation with hand stainless steel and Ni-Ti files plus the use of a rotary system (Vortex Blue, Dentsply Sirona), versus a full reciprocation instrumentation technique (WaveOne Gold [WOG], Dentsply Sirona). METHODS: A total of 368 endodontic cases (n = 184) in anterior and premolar teeth, completed by dental students at the University of Michigan School of Dentistry from 2013 to 2022, were used for the study. The groups were evaluated by two calibrated clinicians, observing the incidence of clinical errors: file separations, over-instrumentation, ledges and transportations. Treatment outcomes were also observed. Data were analyzed statistically by Fisher's exact test and Mann-Whitney U test (p < 0.05). RESULTS: No significant difference in file separations, ledges, and transportation was observed between the two groups. However, the WOG Group experienced significantly more over-instrumentation than HYB group, although this did not significantly affect tooth survival or periapical index (PAI). Cases with PAI scores of 5 were found to have significantly less tooth survival compared to the other PAI scores. CONCLUSIONS: It can be concluded that both techniques in our study are well suited to advancing the endodontic dental education of students and novice operators, anticipating relatively successful outcomes of tooth survival, as long as the cases selected are less severe in progression preoperatively.
Subject(s)
Root Canal Therapy , Humans , Retrospective Studies , Root Canal Therapy/instrumentation , Clinical Competence , Treatment Outcome , Students, Dental , Education, Dental/methods , Root Canal Preparation/instrumentation , Endodontics/education , Stainless SteelABSTRACT
A healing material must have desirable characteristics such as maintaining a physiological environment, protective barrier-forming abilities, exudate absorption, easy handling, and non-toxicity. Laponite is a synthetic clay with properties such as swelling, physical crosslinking, rheological stability, and drug entrapment, making it an interesting alternative for developing new dressings. This study evaluated its performance in lecithin/gelatin composites (LGL) as well as with the addition of maltodextrin/sodium ascorbate mixture (LGL MAS). These materials were applied as nanoparticles, dispersed, and prepared by using the gelatin desolvation method-eventually being turned into films via the solvent-casting method. Both types of composites were also studied as dispersions and films. Dynamic Light Scattering (DLS) and rheological techniques were used to characterize the dispersions, while the films' mechanical properties and drug release were determined. Laponite in an amount of 8.8 mg developed the optimal composites, reducing the particulate size and avoiding the agglomeration by its physical crosslinker and amphoteric properties. On the films, it enhanced the swelling and provided stability below 50 °C. Moreover, the study of drug release in maltodextrin and sodium ascorbate from LGL MAS was fitted to first-order and Korsmeyer-Peppas models, respectively. The aforementioned systems represent an interesting, innovative, and promising alternative in the field of healing materials.
ABSTRACT
The health benefits provided by plant matrices is due to the presence of certain compounds that, in studies carried out in vitro and in vivo, have shown to have biological activity in certain conditions, not only as a natural treatment against various conditions, but also for the quality of preventing chronic diseases, these compounds, already identified and studied, they can increase their biological function by undergoing structural chemical modifications or by being incorporated into polymer matrices that allow, in the first instance, to protect said compound and increase its bioaccessibility, as well as to preserve or increase the biological effects. Although the stabilization of compounds is an important aspect, it is also the study of the kinetic parameters of the system that contains them, since, due to these studies, the potential application to these systems can be designated. In this review we will address some of the work focused on obtaining compounds with biological activity from plant sources, the functionalization of extracts through double emulsions and nanoemulsions, as well as their toxicity and finally the pharmacokinetic aspects of entrapment systems.
Subject(s)
Plant Extracts , Plant Extracts/pharmacology , Emulsions/chemistry , Biological AvailabilityABSTRACT
This study aimed to detect intracellular trehalose in boar sperm that were cryopreserved with liposomes and conduct an analysis of its effects on some characteristics of thawed sperm, including rheological properties. First, soybean lecithin cholesterol-based liposomes were produced and characterized in the presence of 300 mM trehalose. Next, semen samples were frozen in two freezing media: a control medium with 300 mM trehalose and an experimental medium supplemented with 300 mM trehalose and 10% liposomes, both of which were thawed and then studied to ascertain their integrity, motility, rheological response, and trehalose quantities by testing two methods of spermatic lysis via high-performance liquid chromatography with an evaporative light-scattering detector (HPLC-ELSD). The results found spherical liposomes measuring 357 nm that were relatively stable in an aqueous medium and had an entrapment efficiency of 73%. An analysis of the cryopreserved ejaculates showed that their viability and motility did not significantly differ between groups (P > 0.05). The viscous response of the samples was influenced by the extracellular medium rather than by the freezing-thawing process, which resulted in a loss of interaction between the cells and cryoprotectants. Finally, intracellular trehalose levels were determined using HPLC-ELSD, with no differences observed (P > 0.05) when comparing both sperm lysis methods. The use of liposomes with trehalose appears to be a promising option for boar semen cryopreservation, with a marked effect on rheological properties. The proposed HPLC-ELSD method was effective for measuring trehalose in cryopreserved cell samples.
Subject(s)
Semen Preservation , Semen , Male , Swine , Animals , Semen/physiology , Trehalose , Semen Preservation/veterinary , Semen Preservation/methods , Liposomes , Sperm Motility/physiology , Disaccharides , Cryopreservation/veterinary , Cryopreservation/methods , Cryoprotective Agents/pharmacology , Spermatozoa/physiologyABSTRACT
Mangiferin is an important xanthone compound presenting various biological activities. The objective of this study was to develop, characterize physicochemical properties, and evaluate the anti-topoisomerase activity of poly(lactic-co-glycolic acid) (PLGA) nanoparticles containing mangiferin. The nanoparticles were developed by the emulsion solvent evaporation method and the optimal formulation was obtained with a response surface methodology (RSM); this formulation showed a mean size of 176.7 ± 1.021 nm with a 0.153 polydispersibility index (PDI) value, and mangiferin encapsulation efficiency was about 55%. The optimal conditions (6000 rpm, 10 min, and 300 µg of mangiferin) obtained 77% and the highest entrapment efficiency (97%). The in vitro release profile demonstrated a gradual release of mangiferin from 15 to 180 min in acidic conditions (pH 1.5). The fingerprint showed a modification in the maximum absorption wavelength of both the polymer and the mangiferin. Results of anti-toposiomerase assay showed that the optimal formulation (MG4, 25 µg/mL) had antiproliferative activity. High concentrations (2500 µg/mL) of MG4 showed non-in vitro cytotoxic effect on BEAS 2B and HEPG2. Finally, this study showed an encapsulation process with in vitro gastric digestion resistance (1.5 h) and without interfering with the metabolism of healthy cells and their biological activity.
ABSTRACT
The study of pharmacological interactions between herbal remedies and conventional drugs is important because consuming traditional herbal remedies as supplements or alternative medicine is fairly common and their concomitant administration with prescribed drugs could either have a favorable or unfavorable effect. Therefore, this work aims to determine the pharmacological interactions of a turmeric acetone extract (TAE) and its main metabolite (curcumin) with common anti-ulcer drugs (ranitidine and bismuth subsalicylate), using an ethanol-induced ulcer model in Wistar rats. The analysis of the interactions was carried out via the Combination Index-Isobologram Equation method. The combination index (CI) calculated at 0.5 of the affected fraction (fa) indicated that the TAE or curcumin in combination with ranitidine had a subadditive interaction. The results suggest that this antagonistic mechanism is associated to the mucoadhesion of curcumin and the TAE, determined by rheological measurements. Contrastingly, both the TAE and curcumin combined with bismuth subsalicylate had an additive relationship, which means that there is no pharmacological interaction. This agrees with the normalized isobolograms obtained for each combination. The results of this study suggest that mucoadhesion of curcumin and the TAE could interfere in the effectiveness of ranitidine, and even other drugs.
Subject(s)
Anti-Ulcer Agents/therapeutic use , Bismuth/therapeutic use , Curcumin/pharmacology , Ethanol/adverse effects , Organometallic Compounds/therapeutic use , Plant Extracts/pharmacology , Ranitidine/therapeutic use , Salicylates/therapeutic use , Stomach Ulcer/prevention & control , Animals , Anti-Ulcer Agents/antagonists & inhibitors , Curcuma , Disease Models, Animal , Drug Interactions , Gastric Mucosa/drug effects , Herb-Drug Interactions , Male , Organometallic Compounds/antagonists & inhibitors , Ranitidine/antagonists & inhibitors , Rats , Rats, Wistar , Salicylates/antagonists & inhibitors , Stomach Ulcer/chemically inducedABSTRACT
In this study, we characterize fructan extracts from five wild agave varieties at three ages to identify their potential use in the food industry. Physicochemical parameters (solids soluble total and pH), sugar content and fructan distribution profiles by high-performance anion-exchange chromatography (HPAEC) were evaluated. We found that the ages and variety influenced the carbohydrate content and also fructan dispersion. Two- to four-year-old plants exhibited the highest concentrations of free sugars and fructans, with a low apparent degree of polymerization (DPa) of ≤9 monomers, which highlights their potential use as prebiotics. Conversely, 10- to 12-year-old plants presented a low concentration of free sugars and fructans with a maximum DPa of 70 monomers, which can be used to obtain fractions with high, intermediate and low DPa. These fractions have a potential use in the food industry as prebiotic, soluble fibers, stabilizers and sweeteners, among others. The agave varieties Agave spp., Agave salmiana, and Agave atrovirens showed mainly fructooligosaccharides (FOSs). Due to the presence of these low molecular carbohydrates, prebiotics, fermented products and/or syrups could be obtained. A. salmiana spp. crassipina and Agave tequilana variety cenizo presented DPa ≤50 and DPa ≤70, respectively, which could be useful in the production of fructan fractions of different DPa. These fractions might be used as functional ingredients in the manufacture of a wide range of food products.
ABSTRACT
In this work, we prepared a novel composite based on hybrid gelatin carriers and montmorillonite clay (MMT) to analyze its viability as controlled drug delivery system. The objective of this research involves the characterization of composites formed by structured lipid-gelatin micro-particles (MP) and MMT clay. This analysis included the evaluation of the composite according to its rheological properties, morphology (SEM), particle size, XRD, FT-IR, and in vitro drug release. The effect of pH in the properties of the composite is evaluated. A novel raspberry-like or armor MP/MMT clay composite is reported, in which the pH has an important effect on the final structure of the composite for ad-hoc drug delivery systems. For pH values below the isoelectric point, we obtained defined morphologies with entrapment efficiencies up to 67%. The pH level controls the MP/MMT composite release mechanism, restringing drug release in the stomach-like environment. Intended for oral administration, these results evidence that the MP/MMT composite represents an attractive alternative for intestinal-colonic controlled drug delivery systems.
Subject(s)
Atorvastatin/chemistry , Bentonite/chemistry , Delayed-Action Preparations/chemistry , Nanocomposites/chemistry , Atorvastatin/administration & dosage , Atorvastatin/pharmacokinetics , Delayed-Action Preparations/administration & dosage , Delayed-Action Preparations/pharmacokinetics , Drug Carriers/chemistry , Drug Delivery Systems/methods , Hydrogen-Ion Concentration , Microscopy, Electron, Scanning , Nanocomposites/ultrastructure , Particle Size , Spectroscopy, Fourier Transform Infrared , X-Ray DiffractionABSTRACT
Nanoemulsions are feasible delivery systems of lipophilic compounds, showing potential as edible coatings with enhanced functional properties. The aim of this work was to study the effect of emulsifier type (stearic acid (SA), Tween 80 (T80) or Tween 80/Span 60 (T80/S60)) and emulsification process (homogenization, ultrasound or microfluidization) on nanoemulsion formation based on oxidized corn starch, beeswax (BW) and natural antimicrobials (lauric arginate and natamycin). The response variables were physicochemical properties, rheological behavior, wettability and antimicrobial activity of BW-starch nanoemulsions (BW-SN). The BW-SN emulsified using T80 and microfluidized showed the lowest droplet size (77.6 ± 6.2 nm), a polydispersion index of 0.4 ± 0.0 and whiteness index (WI) of 31.8 ± 0.8. This BW-SN exhibited a more negative ζ-potential: -36 ± 4 mV, and Newtonian flow behavior, indicating great stability. BW-SN antimicrobial activity was not affected by microfluidization nor the presence of T80, showing inhibition of the deteriorative fungi R. stolonifer, C. gloeosporioides and B. cinerea, and the pathogenic bacterium S. Saintpaul. In addition, regardless of emulsifier type and emulsification process, BW-SN applied on the tomato surface exhibited low contact angles (38.5° to 48.6°), resulting in efficient wettability (-7.0 mN/m to -8.9 mN/m). These nanoemulsions may be useful to produce edible coatings to preserve fresh-produce quality and safety.
Subject(s)
Anti-Infective Agents/therapeutic use , Drug Delivery Systems , Nanocomposites/chemistry , Waxes/chemistry , Anti-Infective Agents/chemistry , Emulsions/chemistry , Emulsions/therapeutic use , Hexoses/chemistry , Hexoses/therapeutic use , Humans , Nanocomposites/therapeutic use , Polysorbates/chemistry , Polysorbates/therapeutic use , Starch/chemistry , Starch/therapeutic use , Stearic Acids/chemistry , Stearic Acids/therapeutic useABSTRACT
Traumatic spinal cord injury (TSCI) is a health problem for which there is currently no treatment or definitive therapy. Medicine has explored therapeutic options for patients with TSCI with the aim to improve their quality of life. One alternative has been the development of biomaterials that offer neuroprotection or neuroregeneration of damaged nerve tissue. The microinjection of iodine-doped polypyrrole particles synthesised by plasma (PPPy/I) has shown neuroprotective effects that favour motor function recovery in experimental animals with TSCI. However, their ability to migrate into the tissue has led to the need to test a suspension vehicle that enables the concentration of particles at the site of injury. To achieve this, two biomaterials of PPPy/I (P1 and P2) were studied. The superficial physicochemical characterisation of the polymers was performed by infrared spectroscopy, X-ray photoelectron spectroscopy and contact angle. The rheological performance under oscillatory shear rate of suspensions containing both polymers alone and in combination with bovine serum albumin was also studied. In vivo tests were performed on animals with and without TSCI that were microinjected with particles of P1 or P2 in suspension using a solution of rat serum albumin. Exposure to the protein solutions generates a protein multilayer on the surface of the biomaterials that can drastically change the behaviour of both P1 and P2, which led to severe repercussions in the in vivo assays. The results showed that surface chemistry plays an important role in the performance and that it is possible to treat TSCI with these materials. The interaction of the surface of materials PPPy/I.1 (P1) and PPPy/I.2 (P2) with bovine serum albumin (BSA) resulted in a series of changes in the surface chemistry of both biomaterials. The contact angle study (Fig. A) showed the presence of a critical BSA concentration ([BSA]c), in which a monolayer was formed on both polymers and then a stable protein multilayer, as evidenced by the establishment of a plateau in the determination of the contact angle. In vivo tests showed that this interaction may be beneficial in the treatment of traumatic spinal cord injury (TSCI), depending on the surface characteristics with or without rat serum albumin (RSA). The TSCI + P1 and TSCI + P2 + RSA groups obtained significant differences in functional recovery compared with the control group according to the Basso, Beattie and Bresnahan scale (BBB).
Subject(s)
Albumins/administration & dosage , Polymers/chemistry , Pyrroles/chemistry , Spinal Cord Injuries/drug therapy , Adsorption , Animals , Cattle , Chemistry, Physical , Female , Humans , Hydrogen-Ion Concentration , Iodine/chemistry , Oscillometry , Quality of Life , Rats , Rats, Long-Evans , Rheology , Serum Albumin/chemistry , Serum Albumin, Bovine/chemistry , Spectroscopy, Fourier Transform Infrared , Surface Properties , TemperatureABSTRACT
The rheological properties of pooled tracheobronchial secretions (TBS) of chicken, including mucus, have not been characterized. Yet mucolytic drugs are frequently used in poultry medicine. To define such properties, TBS from healthy untreated and from chickens treated with various mucolytic drugs was studied. Three hundred, three-week-old Rhode Island Red chickens were divided into five groups, with three repetitions each (n = 20) as follows: ambroxol (GAmb), ethylene diamine dihydro-iodide (GEddi), carbocysteine (GCs), bromhexine (GBr), and an untreated control group (CG). Under anesthesia, samples of TBS were taken by gently flushing saline solution through the tracheobronchial tree, and rheological evaluations were made to determine viscosity, yield stress, and viscoelasticity by means of a rheometer using controlled efforts with a geometry system of concentric cylinders. It was found that TBS in the CG and in all treatments showed a non-Newtonian behavior (n < 1). TBS from all treatments possess yield stress (necessary force applied for a fluid to flow) and a pseudo-solid type behavior (viscoelastic test) as far as elasticity is concerned. TBS from treated animals revealed that yield stress was higher for the GBr and lowest for GAmb. Statistically significant differences in viscosity were observed among all treatments, including CG (P < 0.05). Considering yield stress, little effort would be required for respiratory cilia to displace TBS in ambroxol medicated chickens, followed by carbocysteine. Contrary to expectation, cilia from healthy chickens medicated with bromhexine or ethylene diamine dihydro-iodide, would require greater force to displace mucus as compared to untreated healthy birds.
Subject(s)
Expectorants/pharmacology , Mucus/drug effects , Animals , Bronchi/metabolism , Chickens , Rheology , Trachea/metabolism , ViscosityABSTRACT
The influence of closantel on the rheological and physicochemical properties (particle size and by UV-Vis absorption spectroscopy) of PVA aqueous solutions is studied here. About 1% PVA aqueous solutions were prepared by varying the closantel content. The increase of closantel content led to a reduction in the particle size of final solutions. All the solutions were buffered at pH 7.4 and exhibited shear-thinning behavior. Furthermore, in oscillatory flow, a "solid-like" type behavior was observed for the sample containing 30 µg/mL closantel. Indicating a strong interaction between the dispersed and continuous phases and evidencing an interconnected network between the nanoparticle and PVA, this sample also showed the highest shear viscosity and higher shear thinning slope, indicating a more intrincate structure disrupted by shear. In conclusion, PVA interacts with closantel in aqueous solution and the critical concentration for closantel encapsulation by PVA was about 30 µg/mL; above this concentration, the average particle size decreased notoriously which was associated to closantel interacting with the surface of the PVA aggregates and thus avoiding to some extent direct polymer-polymer interaction.
Subject(s)
Nanoparticles/chemistry , Polyvinyl Alcohol/chemistry , Salicylanilides/chemistry , Molecular Conformation , Nanoparticles/metabolism , Particle Size , Pharmaceutical Solutions/chemistry , Pharmaceutical Solutions/metabolism , Polyvinyl Alcohol/metabolism , Rheology/methods , Salicylanilides/metabolismABSTRACT
Continuous flow and linear viscoelasticity rheology of chocolate coating is studied in this work using fat substitute gums (xanthan, GX). An alternative conching process, using a Rotor-Estator (RE) type impeller, is proposed. The objective is to obtain a chocolate coating material with improved flow properties. Characterization of the final material through particle size distribution (PSD), differential scanning calorimetry (DSC) and proximal analysis is reported. Particle size distribution of the final material showed less polydispersity and therefore, greater homogeneity; fusion points were also generated at around 20 °C assuming crystal type I (ß'2) and II (α). Moreover, the final material exhibited crossover points (higher structure material), whereas the commercial brand chocolate used for comparison did not. The best conditions to produce the coating were maturing of 36 h and 35 °C, showing crossover points around 76 Pa and a 0.505 solids particle dispersion (average particle diameter of 0.364 µm), and a fusion point at 20.04 °C with a ΔHf of 1.40 (J/g). The results indicate that xanthan gum is a good substitute for cocoa butter and provides stability to the final product.
ABSTRACT
Fermentation with filamentous fungi in a bioreactor is a complex dynamic process that is affected by flow conditions and the evolution of the rheological properties of the medium. These properties are mainly affected by the biomass concentration and the morphology of the fungus. In this work, the rheological properties of a fermentation with the fungus Beauveria bassiana under different hydrodynamic conditions were studied and the rheological behavior of this broth was simulated through a mixture of carboxymethyl cellulose sodium and cellulose fibers (CMCNa-SF). The bioreactor was a 10 L CSTR tank operated at different stir velocities. Rheological results were similar at 100 and 300 rpm for both systems. However, there was a significant increase in the viscosity accompanied by a change in the consistence index, calculated according to the power law model, for both systems at 800 rpm. The systems exhibited shear-thinning behavior at all stir velocities, which was determined with the power law model. The mixing time was observed to increase as the cellulose content in the system increased and, consequently, the efficiency of mixing diminished. These results are thought to be due to the rheological and morphological similarities of the two fungal systems. These results will help in the optimization of scale-up production of these fungi.
Subject(s)
Beauveria/metabolism , Bioreactors/microbiology , Industrial Microbiology/methods , Beauveria/chemistry , Beauveria/growth & development , Carboxymethylcellulose Sodium/metabolism , Cellulose/metabolism , Culture Media/chemistry , Culture Media/metabolism , Fermentation , Hydrodynamics , Industrial Microbiology/instrumentation , Kinetics , Rheology , ViscosityABSTRACT
BACKGROUND: The process of convective drying was evaluated in terms of the bioactive compounds contained in nopal samples before and after dehydration. Total polyphenol, flavonoid, flavonol, carotene and ascorbic acid contents were determined in undehydrated and dehydrated samples. Two drying temperatures (45 and 65 °C) and two air flow rates (3 and 5 m s(-1) ) were evaluated. The rheology of samples under the best drying conditions was also studied, since it provides important information regarding processing (mixing, flow processing) as well as the sensory attributes (texture) of rehydrated samples. RESULTS: Non-Newtonian shear-thinning behaviour was observed for samples dried at 45 °C, while samples dried at 65 °C showed shear-thickening behaviour, possibly caused by thermal chain scission of high-molecular-weight components. CONCLUSION: The best conditions for bioactive compound preservation were a drying temperature of 45 °C and an air flow rate of 3 m s(-1) , resulting in 40.97 g phenols, 23.41 g flavonoids, 0.543 g ß-carotene and 0.2815 g ascorbic acid kg(-1) sample as shown in table 3.
Subject(s)
Antioxidants/analysis , Food Handling/methods , Opuntia/chemistry , Plant Components, Aerial/chemistry , Plant Extracts/chemistry , Ascorbic Acid/analysis , Chemical Phenomena , Flavonoids/analysis , Functional Food/analysis , Hot Temperature , Mexico , Phenols/analysis , Polyphenols , Rheology , Viscosity , Water/analysis , beta Carotene/analysisABSTRACT
The oily (hexane) and aqueous extracts from apple seeds (Malus domestica Borkh Rosaceae-) cultivars Winter Banana (WB), Winter Permain (WP) and Blanca de Asturias (BA) have shown significant differences in phenolic content and antioxidant activity. BA seed oily extracts and WB seed aqueous extracts have presented the best scavenging capacity of DPPH radical and inhibition of hydroxyl radicals. In the biological assay apple seed extracts showed protection against low density lipoproteins (LDL) oxidation, which might fight the risk of atherosclerosis. The BA oily seed extract may have potential use as nutraceutical ingredient.
La fracción oleosa (obtenida con hexano) y extractos acuosos de harina de semilla de manzana (Malus domestica BorkhRosaceae-) variedades Winter Banana (WB), Winter Permain (WP) y Blanca de Asturias (BA) mostraron diferencias significativas en el contenido de polifenoles independientemente de la variedad. Las diferentes fracciones mostraron capacidad de atrapamiento del radical DPPH y de inhibición del radical hidroxilo, siendo la fracción oleosa de las semillas de BA la mejor en los dos análisis; en el caso de los extractos acuosos, las semillas de WB presentaron la mejor respuesta. En la evaluación biológica los diferentes extractos mostraron un efecto protector contra la oxidación de las lipoproteínas de baja densidad (LDL) lo cual puede disminuir el riesgo de ateroesclerosis. La fracción oleosa de semillas de BA mostró mayor potencial como ingrediente nutracéutico.
Subject(s)
Antioxidants , Phenolic Compounds/analysis , Phenols/analysis , Malus/chemistry , Plant Extracts , Seeds/chemistryABSTRACT
Quercus resinosa leaves are used in northern Mexico as a refreshing beverage rich in polyphenolic compounds. These leaves show astringency and hence need taste masking for incorporating in a food product. They also interact with many other food components and are not very stable to food processing environments, thus it is important to protect them and a common way is by encapsulation. In the present study the use of encapsulation by spray-drying of Quercus resinosa leaves infusions was evaluated. Q. resinosa leaves were collected, air dried, and milled prior to infusion preparation. Lactose-sodium caseinate blends at 3 different proportions (11 : 4%, 9 : 6%, and 7 : 8%) were dispersed with a constant amount of lyophilized infusion (0.075%) and processed under high-pressure homogenization (0, 100, 200, 300 MPa). Total phenolic content, DPPH kinetic analysis, deoxy-D-ribose oxidation inhibition, rheological evaluation, and particle size analysis were performed to evaluate the obtained capsules. High antioxidant activity was shown by capsules despite their very low concentration when inhibiting deoxy-D-ribose oxidation. Chain breaking rate was related to polyphenolic concentration in capsules. Using lactose-caseinate blends produces capsules of submicron to nanometer size that retain the good antioxidant capacities of original infusions.
Subject(s)
Antioxidants/analysis , Desiccation/methods , Food Handling/methods , Food Preservation/methods , Plant Leaves/chemistry , Quercus/chemistry , Aerosols , Analysis of Variance , Caseins/administration & dosage , Chemical Phenomena , Chemistry, Physical/methods , Hot Temperature , Lactose/administration & dosage , Particle Size , Phenols/analysis , Pressure , RheologyABSTRACT
The interest in nopal has encouraged the use of dehydration; there are few studies about the effect of process parameters on the nopal polyphenol content and antioxidant activity. The objective of the present work was to evaluate the effect of air-drying flow rates on the amount and antioxidant capacity of extracts of Opuntia ficus indica cladodes. Nopal was dried at 45 degrees C and air flow rates of 3 and 5 m/sec. Samples were analyzed for moisture, total polyphenol, flavonoid, and flavonol contents, chain-breaking activity, inhibition of low-density lipoprotein and deoxyribose oxidation. Nopal drying at an air flow rate of 3 m/sec showed higher values of phenols, flavonoids and flavonols. The best value of low-density lipoprotein inhibition and deoxyribose was found at 1,000 microg/ml. The air flow rate affected the amount of polyphenols and the OH( . ) radical scavenging, but did not modify the chain-breaking activity and the low-density lipoprotein inhibition activity.
Subject(s)
Antioxidants/pharmacology , Deoxyribose/metabolism , Desiccation/methods , Lipoproteins, LDL/metabolism , Opuntia/chemistry , Plant Extracts/pharmacology , Polyphenols/pharmacology , Air , Food Handling/methods , Hydroxyl Radical/metabolism , Lipoproteins, LDL/pharmacology , Plant Stems/chemistryABSTRACT
This article reports the submerged culture of the entomopathogenic nematode Steinernema carpocapsae and its symbiotic bacterium, Xenorhabdus nematophila, within an internal-loop airlift bioreactor. Two configurations of the inner cylinder were tested: a standard draft tube (SDT) and a static mixer (SM), as well as two production media: MP1 (500 mL/L whey, among other ingredients) and MP2 (82 mL/L agave-juice from Agave spp., among other ingredients). Three fermentations were carried out: F1 --> SDT-MP1, F2 --> SM-MP1 and F3 --> SM-MP2. The operating conditions were expressed on the basis of dimensionless Reynolds number (Re) and volumetric oxygen transfer coefficient (k(L)a), both of them determined on riser and downcomer sections within the bioreactor. The experiments began with fewer than 1,000 infective juvenile nematode stages (IJ) per mL and at t = 20 d, they achieved (nematodes/mL-%IJ) 222,000-87%, 62,200-23% and 114,600-80%, within F1, F2 and F3 experiments, respectively. Nonetheless, the achieved maximum nematode biomass concentrations (g/L) were F1 --> 408, F2 --> 557 and F3 --> 613, and occurred at t = 16, 10 and 12 d, respectively. The fermentation operating conditions involved 0.042 (-) < Re < 647 (-) and 2.8 x 10(-4) s(-1) < k(L)a < 0.0447 s(-1), as functions of 0.004 m/s < superficial gas velocity (within the riser) < 0.079 m/s, 0.001 m/s < mean downcomer velocity < 0.014 m/s, and culture broth rheological properties which evolved from nearly the Newtonian behaviour to the pseudoplastic one. The maximum IJ concentration was achieved within F1 experiment (193,406 IJ/mL). Also, fermentation conditions involving higher riser-Re and lower downcomer-Re as well as higher nutriment concentrations in culture medium, promote higher nematode biomass concentrations but lower %IJ, maybe as a result of better conditions for the nematode population development.