High-Capacity, Cooperative CO2 Capture in a Diamine-Appended Metal-Organic Framework through a Combined Chemisorptive and Physisorptive Mechanism.

Diamine-appended Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) metal-organic frameworks are promising candidates for carbon capture that exhibit exceptional selectivities and high capacities for CO2. To date, CO2 uptake in these materials has been shown to occur predominantly via a chemisorption mechanism involving CO2 insertion at the amine-appended metal sites, a mechanism that limits the capacity of the material to ∼1 equiv of CO2 per diamine. Herein, we report a new framework, pip2-Mg2(dobpdc) (pip2 = 1-(2-aminoethyl)piperidine), that exhibits two-step CO2 uptake and achieves an unusually high CO2 capacity approaching 1.5 CO2 per diamine at saturation. Analysis of variable-pressure CO2 uptake in the material using solid-state nuclear magnetic resonance (NMR) spectroscopy and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) reveals that pip2-Mg2(dobpdc) captures CO2 via an unprecedented mechanism involving the initial insertion of CO2 to form ammonium carbamate chains at half of the sites in the material, followed by tandem cooperative chemisorption and physisorption. Powder X-ray diffraction analysis, supported by van der Waals-corrected density functional theory, reveals that physisorbed CO2 occupies a pocket formed by adjacent ammonium carbamate chains and the linker. Based on breakthrough and extended cycling experiments, pip2-Mg2(dobpdc) exhibits exceptional performance for CO2 capture under conditions relevant to the separation of CO2 from landfill gas. More broadly, these results highlight new opportunities for the fundamental design of diamine-Mg2(dobpdc) materials with even higher capacities than those predicted based on CO2 chemisorption alone.

Selective Adsorption of Oxygen from Humid Air in a Metal-Organic Framework with Trigonal Pyramidal Copper(I) Sites.

High or enriched-purity O2 is used in numerous industries and is predominantly produced from the cryogenic distillation of air, an extremely capital- and energy-intensive process. There is significant interest in the development of new approaches for O2-selective air separations, including the use of metal-organic frameworks featuring coordinatively unsaturated metal sites that can selectively bind O2 over N2 via electron transfer. However, most of these materials exhibit appreciable and/or reversible O2 uptake only at low temperatures, and their open metal sites are also potential strong binding sites for the water present in air. Here, we study the framework CuI-MFU-4l (CuxZn5-xCl4-x(btdd)3; H2btdd = bis(1H-1,2,3-triazolo[4,5-b],[4',5'-i])dibenzo[1,4]dioxin), which binds O2 reversibly at ambient temperature. We develop an optimized synthesis for the material to access a high density of trigonal pyramidal CuI sites, and we show that this material reversibly captures O2 from air at 25 °C, even in the presence of water. When exposed to air up to 100% relative humidity, CuI-MFU-4l retains a constant O2 capacity over the course of repeated cycling under dynamic breakthrough conditions. While this material simultaneously adsorbs N2, differences in O2 and N2 desorption kinetics allow for the isolation of high-purity O2 (>99%) under relatively mild regeneration conditions. Spectroscopic, magnetic, and computational analyses reveal that O2 binds to the copper(I) sites to form copper(II)-superoxide moieties that exhibit temperature-dependent side-on and end-on binding modes. Overall, these results suggest that CuI-MFU-4l is a promising material for the separation of O2 from ambient air, even without dehumidification.

Reactive high-spin iron(IV)-oxo sites through dioxygen activation in a metal-organic framework.

In nature, nonheme iron enzymes use dioxygen to generate high-spin iron(IV)=O species for a variety of oxygenation reactions. Although synthetic chemists have long sought to mimic this reactivity, the enzyme-like activation of O2 to form high-spin iron(IV) = O species remains an unrealized goal. Here, we report a metal-organic framework featuring iron(II) sites with a local structure similar to that in α-ketoglutarate-dependent dioxygenases. The framework reacts with O2 at low temperatures to form high-spin iron(IV) = O species that are characterized using in situ diffuse reflectance infrared Fourier transform, in situ and variable-field Mössbauer, Fe Kß x-ray emission, and nuclear resonance vibrational spectroscopies. In the presence of O2, the framework is competent for catalytic oxygenation of cyclohexane and the stoichiometric conversion of ethane to ethanol.

Reversible Thermal Conductivity Switching Using Flexible Metal-Organic Frameworks.

The ability to control thermal transport is critical for the design of thermal rectifiers, logic gates, and transistors, although it remains a challenge to design materials that exhibit large changes in thermal conductivity with switching ratios suitable for practical applications. Here, we propose the use of flexible metal-organic frameworks, which can undergo significant structural changes in response to various stimuli, to achieve tunable switchable thermal conductivity. In particular, we use molecular dynamics simulations to show that the thermal conductivity of the flexible framework Fe(bdp) (bdp2- = 1,4-benzenedipyrazolate) becomes highly anisotropic upon transitioning from the expanded to the collapsed phase, with the conductivity decreasing by nearly an order of magnitude along the direction of compression. Our results add to a small but growing number of studies investigating metal-organic frameworks for thermal transport.

Selective scandium ion capture through coordination templating in a covalent organic framework.

The use of coordination complexes within covalent organic frameworks can significantly diversify the structures and properties of this class of materials. Here we combined coordination chemistry and reticular chemistry by preparing frameworks that consist of a ditopic (p-phenylenediamine) and mixed tritopic moieties-an organic ligand and a scandium coordination complex of similar sizes and geometries, both bearing terminal phenylamine groups. Changing the ratio of organic ligand to scandium complex enabled the preparation of a series of crystalline covalent organic frameworks with tunable levels of scandium incorporation. Removal of scandium from the material with the highest metal content subsequently resulted in a 'metal-imprinted' covalent organic framework that exhibits a high affinity and capacity for Sc3+ ions in acidic environments and in the presence of competing metal ions. In particular, the selectivity of this framework for Sc3+ over common impurity ions such as La3+ and Fe3+ surpasses that of existing scandium adsorbents.

Cooperative Carbon Dioxide Capture in Diamine-Appended Magnesium-Olsalazine Frameworks.

Diamine-appended Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) metal-organic frameworks have emerged as promising candidates for carbon capture owing to their exceptional CO2 selectivities, high separation capacities, and step-shaped adsorption profiles, which arise from a unique cooperative adsorption mechanism resulting in the formation of ammonium carbamate chains. Materials appended with primary,secondary-diamines featuring bulky substituents, in particular, exhibit excellent stabilities and CO2 adsorption properties. However, these frameworks display double-step adsorption behavior arising from steric repulsion between ammonium carbamates, which ultimately results in increased regeneration energies. Herein, we report frameworks of the type diamine-Mg2(olz) (olz4- = (E)-5,5'-(diazene-1,2-diyl)bis(2-oxidobenzoate)) that feature diverse diamines with bulky substituents and display desirable single-step CO2 adsorption across a wide range of pressures and temperatures. Analysis of CO2 adsorption data reveals that the basicity of the pore-dwelling amine─in addition to its steric bulk─is an important factor influencing adsorption step pressure; furthermore, the amine steric bulk is found to be inversely correlated with the degree of cooperativity in CO2 uptake. One material, ee-2-Mg2(olz) (ee-2 = N,N-diethylethylenediamine), adsorbs >90% of the CO2 from a simulated coal flue stream and exhibits exceptional thermal and oxidative stability over the course of extensive adsorption/desorption cycling, placing it among top-performing adsorbents to date for CO2 capture from a coal flue gas. Spectroscopic characterization and van der Waals-corrected density functional theory calculations indicate that diamine-Mg2(olz) materials capture CO2 via the formation of ammonium carbamate chains. These results point more broadly to the opportunity for fundamentally advancing materials in this class through judicious design.

Metal-organic frameworks as O2-selective adsorbents for air separations.

Oxygen is a critical gas in numerous industries and is produced globally on a gigatonne scale, primarily through energy-intensive cryogenic distillation of air. The realization of large-scale adsorption-based air separations could enable a significant reduction in associated worldwide energy consumption and would constitute an important component of broader efforts to combat climate change. Certain small-scale air separations are carried out using N2-selective adsorbents, although the low capacities, poor selectivities, and high regeneration energies associated with these materials limit the extent of their usage. In contrast, the realization of O2-selective adsorbents may facilitate more widespread adoption of adsorptive air separations, which could enable the decentralization of O2 production and utilization and advance new uses for O2. Here, we present a detailed evaluation of the potential of metal-organic frameworks (MOFs) to serve as O2-selective adsorbents for air separations. Drawing insights from biological and molecular systems that selectively bind O2, we survey the field of O2-selective MOFs, highlighting progress and identifying promising areas for future exploration. As a guide for further research, the importance of moving beyond the traditional evaluation of O2 adsorption enthalpy, ΔH, is emphasized, and the free energy of O2 adsorption, ΔG, is discussed as the key metric for understanding and predicting MOF performance under practical conditions. Based on a proof-of-concept assessment of O2 binding carried out for eight different MOFs using experimentally derived capacities and thermodynamic parameters, we identify two existing materials and one proposed framework with nearly optimal ΔG values for operation under user-defined conditions. While enhancements are still needed in other material properties, the insights from the assessments herein serve as a guide for future materials design and evaluation. Computational approaches based on density functional theory with periodic boundary conditions are also discussed as complementary to experimental efforts, and new predictions enable identification of additional promising MOF systems for investigation.

A nature-inspired hydrogen-bonded supramolecular complex for selective copper ion removal from water.

Herein, we present a scalable approach for the synthesis of a hydrogen-bonded organic-inorganic framework via coordination-driven supramolecular chemistry, for efficient remediation of trace heavy metal ions from water. In particular, using copper as our model ion of interest and inspired by nature's use of histidine residues within the active sites of various copper binding proteins, we design a framework featuring pendant imidazole rings and copper-chelating salicylaldoxime, known as zinc imidazole salicylaldoxime supramolecule. This material is water-stable and exhibits unprecedented adsorption kinetics, up to 50 times faster than state-of-the-art materials for selective copper ion capture from water. Furthermore, selective copper removal is achieved using this material in a pH range that was proven ineffective with previously reported metal-organic frameworks. Molecular dynamics simulations show that this supramolecule can reversibly breathe water through lattice expansion and contraction, and that water is initially transported into the lattice through hopping between hydrogen-bond sites.

Coercive Fields Above 6†T in Two Cobalt(II)-Radical Chain Compounds.

Lanthanide permanent magnets are widely used in applications ranging from nanotechnology to industrial engineering. However, limited access to the rare earths and rising costs associated with their extraction are spurring interest in the development of lanthanide-free hard magnets. Zero- and one-dimensional magnetic materials are intriguing alternatives due to their low densities, structural and chemical versatility, and the typically mild, bottom-up nature of their synthesis. Here, we present two one-dimensional cobalt(II) systems Co(hfac)2 (R-NapNIT) (R-NapNIT=2-(2'-(R-)naphthyl)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide, R=MeO or EtO) supported by air-stable nitronyl nitroxide radicals. These compounds are single-chain magnets and exhibit wide, square magnetic hysteresis below 14 K, with giant coercive fields up to 65 or 102 kOe measured using static or pulsed high magnetic fields, respectively. Magnetic, spectroscopic, and computational studies suggest that the record coercivities derive not from three-dimensional ordering but from the interaction of adjacent chains that compose alternating magnetic sublattices generated by crystallographic symmetry.

[UF6 ]2- : A Molecular Hexafluorido Actinide(IV) Complex with Compensating Spin and Orbital Magnetic Moments.

The first structurally characterized hexafluorido complex of a tetravalent actinide ion, the [UF6 ]2- anion, is reported in the (NEt4 )2 [UF6 ]⋅2 H2 O salt (1). The weak magnetic response of 1 results from both UIV spin and orbital contributions, as established by combining X-ray magnetic circular dichroism (XMCD) spectroscopy and bulk magnetization measurements. The spin and orbital moments are virtually identical in magnitude, but opposite in sign, resulting in an almost perfect cancellation, which is corroborated by ab initio calculations. This work constitutes the first experimental demonstration of a seemingly non-magnetic molecular actinide complex carrying sizable spin and orbital magnetic moments.

A Crystalline Polyimide Porous Organic Framework for Selective Adsorption of Acetylene over Ethylene.

The separation of acetylene from ethylene is a crucial process in the petrochemical industry, as even small acetylene impurities can lead to premature termination of ethylene polymerization. Herein, we present the synthesis of a robust, crystalline naphthalene diimide porous aromatic framework via imidization of linear naphthalene-1,4,5,8-tetracarboxylic dianhydride and triangular tris(4-aminophenyl)amine. The resulting material, PAF-110, exhibits impressive thermal and long-term structural stability, as indicated by thermogravimetric analysis and powder X-ray diffraction characterization. Gas adsorption characterization reveals that PAF-110 has a capacity for acetylene that is more than twice its ethylene capacity at 273 K and 1 bar, and it exhibits a moderate acetylene selectivity of 3.9 at 298 K and 1 bar. Complementary computational investigation of each guest binding in PAF-110 suggests that this affinity and selectivity for acetylene arises from its stronger electrostatic interaction with the carbonyl oxygen atoms of the framework. To the best of our knowledge, PAF-110 is the first crystalline porous organic material to exhibit selective adsorption of acetylene over ethylene, and its properties may provide insight into the further optimized design of porous organic materials for this key gas separation.

Slow Magnetic Relaxation in a Dysprosium Ammonia Metallocene Complex.

We report the serendipitous discovery and magnetic characterization of a dysprosium bis(ammonia) metallocene complex, [(C5Me5)2Dy(NH3)2](BPh4) (1), isolated in the course of performing a well-established synthesis of the unsolvated cationic complex [(C5Me5)2Dy][(µ-Ph)2BPh2]. While side reactivity studies suggest that this bis(ammonia) species owes its initial incidence to impurities in the DyCl3(H2O)x starting material, we were able to independently prepare 1 and its tetrahydrofuran (THF) derivative, [(C5Me5)2Dy(NH3)(THF)](BPh4) (2), from the reaction of [(C5Me5)2Dy][(µ-Ph)2BPh2] with ammonia in THF. The low-symmetry complex 1 exhibits slow magnetic relaxation under zero applied direct-current (dc) field to temperatures as high as 46 K and notably exhibits an effective barrier to magnetic relaxation that is more than 150% greater than that previously reported for the [(C5Me5)2Ln][(µ-Ph)2BPh2] precursor. On the basis of fitting of the temperature-dependent relaxation data, magnetic relaxation is found to occur via Orbach, Raman, and quantum-tunneling relaxation processes, and the latter process can be suppressed by the application of a 1400 Oe dc field. Field-cooled and zero-field-cooled dc magnetic susceptibility measurements reveal a divergence at 4 K indicative of magnetic blocking, and magnetic hysteresis was observed up to 5.2 K. These results illustrate the surprises and advantages that the lanthanides continue to offer for synthetic chemists and magnetochemists alike.

Metal Insertion in a Methylamine-Functionalized Zirconium Metal-Organic Framework for Enhanced Carbon Dioxide Capture.

The reaction of ZrCl4 with 2',3',5',6'-tetramethylamino-p-terphenyl-4,4″-dicarboxylic acid (H2tpdc-4CH2NH2·3HCl) in the presence of NaF affords Zr6O4(OH)2.1F1.9(tpdc-4CH2NH2·3HCl)6 (1), which is a new member of the Zr6O4(OH)4(dicarboxylate linker)12 or UiO-68 family, and exhibits high porosity with BET and Langmuir surface areas of 1910 m2/g and 2220 m2/g, respectively. Remarkably, fluoride ion incorporation in the zirconium clusters results in increased thermal stability, marking the first example of enhancement in the stability of a UiO framework by this defect-restoration approach. Although material 1 features four alkylamine groups on each organic linker, the framework does not exhibit the high CO2 uptake that would be expected for reaction between CO2 and the amine groups to form carbamic acid or ammonium carbamate species. The absence of strong CO2 adsorption can likely be attributed to protonation at some of the amine sites and the presence of counterions. Indeed, exposure of material 1 to acetonitrile solutions of the organic bases 1,8-bis(dimethylamino)naphthalene (DMAN) or trimethylamine, affords a partially deprotonated material, which exhibits enhanced CO2 uptake. Exposure of basic amine sites also facilitates the postsynthetic chelation of copper(I) ([Cu(MeCN)4]·CF3SO3) to yield material 2 with an enhanced CO2 uptake of 4 wt % at 0.15 bar, which is double that of the parent framework 1.

Synthesis and Characterization of a Tetrapodal NO4(4-) Ligand and Its Transition Metal Complexes.

We present the synthesis and characterization of alkali metal salts of the new tetraanionic, tetrapodal ligand 2,2'-(pyridine-2,6-diyl)bis(2-methylmalonate) (A4[PY(CO2)4], A = Li(+), Na(+), K(+), and Cs(+)), via deprotection of the neutral tetrapodal ligand tetraethyl 2,2'-(pyridine-2,6-diyl)bis(2-methylmalonate) (PY(CO2Et)4). The [PY(CO2)4](4-) ligand is composed of an axial pyridine and four equatorial carboxylate groups and must be kept at or below 0 °C to prevent decomposition. Exposing it to a number of divalent first-row transition metals cleanly forms complexes to give the series K2[(PY(CO2)4)M(H2O)] (M = Mn(2+), Fe(2+), Co(2+), Ni(2+), Zn(2+)). The metal complexes were comprehensively characterized via single-crystal X-ray diffraction, (1)H NMR and UV-vis absorption spectroscopy, and cyclic voltammetry. Crystal structures reveal that [PY(CO2)4](4-) coordinates in a pentadentate fashion to allow for a nearly ideal octahedral coordination geometry upon binding an exogenous water ligand. Additionally, depending on the nature of the charge-balancing countercation (Li(+), Na(+), or K(+)), the [(PY(CO2)4)M(H2O)](2-) complexes can assemble in the solid state to form one-dimensional channels filled with water molecules. Aqueous electrochemistry performed on [(PY(CO2)4)M(H2O)](2-) suggested accessible trivalent oxidation states for the Fe, Co, and Ni complexes, and the trivalent Co(3+) species [(PY(CO2)4)Co(OH)](2-) could be isolated via chemical oxidation. The successful synthesis of the [PY(CO2)4](4-) ligand and its transition metal complexes illustrates the still-untapped versatility within the tetrapodal ligand family, which may yet hold promise for the isolation of more reactive and higher-valent metal complexes.

Expanding the Chemistry of Molecular U(2+) Complexes: Synthesis, Characterization, and Reactivity of the {[C5 H3 (SiMe3 )2 ]3 U}(-) Anion.

The synthesis of new molecular complexes of U(2+) has been pursued to make comparisons in structure, physical properties, and reactivity with the first U(2+) complex, [K(2.2.2-cryptand)][Cp'3 U], 1 (Cp'=C5 H4 SiMe3 ). Reduction of Cp''3 U [Cp''=C5 H3 (SiMe3 )2 ] with KC8 in the presence of 2.2.2-cryptand or 18-crown-6 generates [K(2.2.2-cryptand)][Cp''3 U], 2-K(crypt), or [K(18-crown-6)(THF)2 ][Cp''3 U], 2-K(18c6), respectively. The UV/Vis spectra of 2-K and 1 are similar, and they are much more intense than those of U(3+) analogues. Variable temperature magnetic susceptibility data for 1 and 2-K(crypt) reveal lower room temperature χM T values relative to the experimental values for the 5f(3) U(3+) precursors. Stability studies monitored by UV/Vis spectroscopy show that 2-K(crypt) and 2-K(18c6) have t1/2 values of 20 and 15 h at room temperature, respectively, vs. 1.5 h for 1. Complex 2-K(18c6) reacts with H2 or PhSiH3 to form the uranium hydride, [K(18-crown-6)(THF)2 ][Cp''3 UH], 3. Complexes 1 and 2-K(18c6) both reduce cyclooctatetraene to form uranocene, (C8 H8 )2 U, as well as the U(3+) byproducts [K(2.2.2-cryptand)][Cp'4 U], 4, and Cp''3 U, respectively.

Record High Single-Ion Magnetic Moments Through 4f(n)5d(1) Electron Configurations in the Divalent Lanthanide Complexes [(C5H4SiMe3)3Ln]⁻.

The recently reported series of divalent lanthanide complex salts, namely [K(2.2.2-cryptand)][Cp'3Ln] (Ln = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm; Cp' = C5H4SiMe3) and the analogous trivalent complexes, Cp'3Ln, have been characterized via dc and ac magnetic susceptibility measurements. The salts of the complexes [Cp'3Dy](-) and [Cp'3Ho](-) exhibit magnetic moments of 11.3 and 11.4 µB, respectively, which are the highest moments reported to date for any monometallic molecular species. The magnetic moments measured at room temperature support the assignments of a 4f(n+1) configuration for Ln = Sm, Eu, Tm and a 4f(n)5d(1) configuration for Ln = Y, La, Gd, Tb, Dy, Ho, Er. In the cases of Ln = Ce, Pr, Nd, simple models do not accurately predict the experimental room temperature magnetic moments. Although an LS coupling scheme is a useful starting point, it is not sufficient to describe the complex magnetic behavior and electronic structure of these intriguing molecules. While no slow magnetic relaxation was observed for any member of the series under zero applied dc field, the large moments accessible with such mixed configurations present important case studies in the pursuit of magnetic materials with inherently larger magnetic moments. This is essential for the design of new bulk magnetic materials and for diminishing processes such as quantum tunneling of the magnetization in single-molecule magnets.

Actinide-based single-molecule magnets.

Actinide single-molecule magnetism has experienced steady growth over the last five years since the first discovery of slow magnetic relaxation in the mononuclear complex U(Ph(2)BPz(2))(3). Given their large spin-orbit coupling and the radial extension of the 5f orbitals, the actinides are well-suited for the design of both mononuclear and exchange-coupled molecules, and indeed at least one new system has emerged every year. By some measures, the actinides are already demonstrating promise for one day exceeding the performance characteristics of transition metal and lanthanide complexes. However, much further work is needed to understand the nature of the slow relaxation in mononuclear actinide complexes, as well as the influence of magnetic exchange on slow relaxation in multinuclear species. This perspective seeks to summarize the successes in the field and to address some of the many open questions in this up and coming area of research.

Influence of an inner-sphere K+ ion on the magnetic behavior of N2(3-) radical-bridged dilanthanide complexes isolated using an external magnetic field.

The synthesis and full magnetic characterization of a new series of N2(3-) radical-bridged lanthanide complexes [{(R2N)2(THF)Ln}2(µ3-η(2):η(2):η(2)-N2)K] [1-Ln; Ln = Gd, Tb, Dy; NR2 = N(SiMe3)2] are described for comprehensive comparison with the previously reported series [K(18-crown-6)(THF)2]{[(R2N)2(THF)Ln]2(µ-η(2):η(2)-N2)} (2-Ln; Ln = Gd, Tb, Dy). Structural characterization of 1-Ln crystals grown with the aid of a Nd2Fe13B magnet reveals inner-sphere coordination of the K(+) counterion within 2.9 Å of the N2(3-) bridge, leading to bending of the planar Ln-(N2(3-))-Ln unit present in 2-Ln. Direct current (dc) magnetic susceptibility measurements performed on 1-Gd reveal antiferromagnetic coupling between the Gd(III) centers and the N2(3-) radical bridge, with a strength matching that obtained previously for 2-Gd at J ∼ -27 cm(-1). Unexpectedly, however, a competing antiferromagnetic Gd(III)-Gd(III) exchange interaction with J ∼ -2 cm(-1) also becomes prominent, dramatically changing the magnetic behavior at low temperatures. Alternating current (ac) magnetic susceptibility characterization of 1-Tb and 1-Dy demonstrates these complexes to be single-molecule magnets under zero applied dc field, albeit with relaxation barriers (Ueff = 41.13(4) and 14.95(8) cm(-1), respectively) and blocking temperatures significantly reduced compared to 2-Tb and 2-Dy. These differences are also likely to be a result of the competing antiferromagnetic Ln(III)-Ln(III) exchange interactions of the type quantified in 1-Gd.

Influence of pyrazolate vs N-heterocyclic carbene ligands on the slow magnetic relaxation of homoleptic trischelate lanthanide(III) and uranium(III) complexes.

Two isostructural series of trigonal prismatic complexes, M(Bp(Me))3 and M(Bc(Me))3 (M = Y, Tb, Dy, Ho, Er, U; [Bp(Me)](-) = dihydrobis(methypyrazolyl)borate; [Bc(Me)](-) = dihydrobis(methylimidazolyl)borate) are synthesized and fully characterized to examine the influence of ligand donor strength on slow magnetic relaxation. Investigation of the dynamic magnetic properties reveals that the oblate electron density distributions of the Tb(3+), Dy(3+), and U(3+) metal ions within the axial ligand field lead to slow relaxation upon application of a small dc magnetic field. Significantly, the magnetization relaxation is orders of magnitude slower for the N-heterocyclic carbene complexes, M(Bc(Me))3, than for the isomeric pyrazolate complexes, M(Bp(Me))3. Further, investigation of magnetically dilute samples containing 11-14 mol % of Tb(3+), Dy(3+), or U(3+) within the corresponding Y(3+) complex matrix reveals thermally activated relaxation is favored for the M(Bc(Me))3 complexes, even when dipolar interactions are largely absent. Notably, the dilute species U(Bc(Me))3 exhibits Ueff ≈ 33 cm(-1), representing the highest barrier yet observed for a U(3+) molecule demonstrating slow relaxation. Additional analysis through lanthanide XANES, X-band EPR, and (1)H NMR spectroscopies provides evidence that the origin of the slower relaxation derives from the greater magnetic anisotropy enforced within the strongly donating N-heterocyclic carbene coordination sphere. These results show that, like molecular symmetry, ligand-donating ability is a variable that can be controlled to the advantage of the synthetic chemist in the design of single-molecule magnets with enhanced relaxation barriers.

Magnetic blocking at 10 K and a dipolar-mediated avalanche in salts of the bis(η8-cyclooctatetraenide) complex [Er(COT)2]-.

The structures and magnetic properties of [K(18-crown-6)](+) (1) and [K(18-crown-6)(THF)2](+) (2) salts of the η(8)-cyclooctatetraenide sandwich complex [Er(COT)2](-) (COT(2-) = cyclooctatetraene dianion) are reported. Despite slight differences in symmetry, both compounds exhibit slow magnetic relaxation under zero applied dc field with relaxation barriers of ∼150 cm(-1) and waist-restricted magnetic hysteresis. Dc relaxation and dilution studies suggest that the drop in the magnetic hysteresis near zero field is influenced by a bulk magnetic avalanche effect coupled with tunneling of the magnetization. Through dilution with [K(18-crown-6)(THF)2][Y(COT)2] (3), these phenomena are substantially quenched, resulting in an open hysteresis loop to 10 K. Importantly, this represents the highest blocking temperature yet observed for a mononuclear complex and the second highest for any single-molecule magnet. A comprehensive comparative analysis of the magnetism of [K(18-crown-6)][Ln(COT)2] (Ln = Sm, Tb, Dy, Ho, Yb) reveals slow relaxation only for [K(18-crown-6)][Dy(COT)2] (4) with weak temperature dependence. Collectively, these results highlight the utility of an equatorial ligand field for facilitating slow magnetic relaxation in the prolate Er(III) ion.