Is thermography an effective screening tool for differentiating benign and malignant skin lesions in the head and neck? A systematic review.

The aim of this study was to assess, through a systematic review, the status of infrared thermography (IRT) as a diagnostic tool for skin neoplasms of the head and neck region and in order to validate its effectiveness in differentiating benign and malignant lesions. A search was carried out in the LILACS, PubMed/MEDLINE, SCOPUS, Web of Science and EMBASE databases including studies published between 2004 and 2024, written in the Latin-Roman alphabet. Accuracy studies with patients aged 18 years or over presenting benign and malignant lesions in the head and neck region that evaluated the performance of IRT in differentiating these lesions were included. Lesions of mesenchymal origin and studies that did not mention histopathological diagnosis were excluded. The systematic review protocol was registered in the PROSPERO database (CRD42023416079). Reviewers independently analyzed titles, abstracts, and full-texts. After extracting data, the risk of bias of the selected studies was assessed using the QUADAS - 2 tool. Results were narratively synthesized and the certainty of evidence was measured using the GRADE approach. The search resulted in 1,587 records and three studies were included. Only one of the assessed studies used static IRT, while the other two studies used cold thermal stress. All studies had an uncertain risk of bias. In general, studies have shown wide variation in the accuracy of IRT for differentiating between malignant and benign lesions, with a low level of certainty in the evidence for both specificity and sensitivity.

Clinical and radiographic characteristics of pycnodysostosis: A systematic review.

Purpose: Pycnodysostosis (PYCD), an autosomal recessive syndrome, is characterized by an imbalance in bone remodeling that produces various clinical and radiographic craniofacial manifestations. This review represents a systematic examination of these manifestations, as well as oral features associated with PYCD. Materials and Methods: A systematic review was conducted across 8 databases from February to March 2023. The search strategy focused on studies reporting cases of PYCD that examined the clinical and radiographic craniofacial and oral characteristics associated with this syndrome. Results: The review included 84 studies, encompassing a total of 179 cases of PYCD. More than half of the patients were female (55.3%), and the mean age was 14.7 years. Parental consanguinity was reported in 51.4% of the cases. The most common craniofacial clinical manifestation was a prominent nose, observed in 57.5% of cases. Radiographically, the most frequently reported craniofacial characteristics included the presence of an obtuse mandibular angle (84.3%) and frontal cranial bosses (82.1%). Clinical and radiographic examinations revealed oral alterations, with micrognathia present in 62.6% of patients and malocclusion in 59.2%. Among dental anomalies, tooth agenesis was the most commonly reported, affecting 15.6% of patients. Conclusion: Understanding the clinical and radiographic craniofacial features of PYCD is crucial for dental professionals. This knowledge enables these clinicians to devise effective treatment plans and improve patient quality of life.

External root thermal analysis of three different obturation techniques.

Background: The purpose of this study was to assess the external root surface thermal behavior when submitted to three different obturation techniques. Material and Methods: Forty-five single-rooted premolars were selected, prepared and randomly divided into three groups according to the studied obturation techniques: lateral condensation (LC), single cone technique (SCT) and injectable thermoplasticized technique (IT). Each tooth was placed in a customized apparatus and connected to a thermocouple. A FLIR T650sc infrared thermal camera was used to assess root temperature in a room under controlled temperature and humidity. Temperature values were recorded using the thermal camera and thermocouples before, during and 30, 60, 90, 120, 150s after obturation. Shapiro-Wilk, QQ-plot, Levene's, ANOVA-three-way, Mauchly's sphericity, Box's M and Bonferroni tests were used to assess data. The significance level was set at 5%. Results: Infrared assessment showed significant temperature changes between time intervals, obturation techniques and root thirds. Temperature increase was observed 30s after obturation for STL, LC and IT, followed by a gradual temperature decline, with temperature values similar to the initial temperature at 150s for LC and IT. SCT temperature values only returned to normal 60s after obturation in the apical third and 90s in the middle and cervical thirds. In all techniques, the temperature did not rise above the critical limit of 10°C. Conclusions: All studied obturation techniques increased root surface temperature with IT showing the highest temperature increase. However, the temperature increase does not exceed the acceptable limits, not causing damage to the surrounding tissues. Key words:Endodontics, changes in body temperature, root canal filling, thermography.

The effects of different metal posts, cements, and exposure parameters on cone-beam computed tomography artifacts.

Purpose: This study assessed the intensity of artifacts produced by 2 metal posts, 2 cements, and different exposure parameters using 2 cone-beam computed tomography (CBCT) units. Materials and Methods: The sample was composed of 20 single-rooted premolars, divided into 4 groups: Ni-Cr/zinc phosphate, Ni-Cr/resin cement, Ag-Pd/zinc phosphate, and Ag-Pd/resin cement. Samples were scanned before and after post insertion and cementation using a CS9000 3D scanner with 4 exposure parameters (85/90 kV and 6.3/10 mA) and an i-CAT scanner with 120 kV and 5 mA. The presence of artifacts was assessed subjectively by 2 observers and objectively by a trained observer using ImageJ software. The Mann-Whitney, Wilcoxon, weighted kappa, and chi-square tests were used to assess data at a 95% confidence level (α<0.05). Results: In the subjective analyses, AgPd presented more hypodense and hyperdense lines than NiCr (P<0.05), and more hypodense halos were found using i-CAT (P<0.05) than using CS9000 3D. More hypodense halos, hypodense lines, and hyperdense lines were observed at 10 mA than at 6.3 mA (P<0.05). More hypodense halos were observed at 85 kV than at 90 kV (P<0.05). CS9000 3D presented more hypodense and hyperdense lines than i-CAT (P<0.05). In the objective analyses, AgPd presented higher percentages of hyperdense and hypodense artifacts than NiCr (P<0.05). Zinc phosphate cement presented higher hyperdense artifact percentages on CS9000 3D scans (P<0.05). CS9000 3D presented higher artifact percentages than i-CAT (P<0.05). Conclusion: High-atomic-number alloys, higher tube current, and lower tube voltage may increase the artifacts present in CBCT images.

Use of Photobiomodulation to Reduce Postoperative Pain, Edema, and Trismus After Third Molar Surgery: A Systematic Review and Meta-Analysis.

PURPOSE: Third molar extraction can cause surgical trauma, which is associated with pain, edema, trismus, and functional limitations. The aim of the present systematic review was to investigate the effects of photobiomodulation (PBM) following the extraction of impacted mandibular third molars. METHODS: An electronic search was conducted in 10 databases from inception up to October 2021 and the grey literature, with no restrictions regarding language or year of publication. Randomized controlled clinical trials (RCT) were included. Studies that were not RCTs were excluded. Reviewers independently analyzed titles and abstracts, followed by full-text analysis. This systematic review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). The exposure variable was the use of PBM and the outcomes were pain, edema, and trismus. Meta-analysis was performed using a random-effects model. The estimate was calculated considering standardized mean differences (SMD) and respective 95% confidence intervals (CI) obtained for each outcome on the first, second, third and seventh postoperative days. The level of evidence was assessed using the GRADE approach. RESULTS: The search resulted in the 3,324 records. Thirty-three RCTs were included in the systematic review and 23 of these were included in the meta-analyses. The studies involved a total of 1,347 participants (56.6% female and 43.4% male) between 16 and 44 years of age. A greater reduction in pain was found in the PBM group compared to the control group on the third postoperative day (SMD: -1.09; 95% CI: -1.63; -0.55; P < .001; low certainty). Edema was discretely lower in the PBM group on the second postoperative day (SMD: -0.61; 95% CI: -1.09; -0.13; P < .001; low certainty) and trismus was discretely lower in the PBM group on the seventh postoperative day (SMD: 0.48; 95% CI: 0.00; 0.96; P < .001; very low certainty). CONCLUSION: The evidence of the effect of PBM regarding the control of pain, edema, and trismus following third molar extractions is low or very low.

Age determination on panoramic radiographs using the Kvaal method with the aid of artificial intelligence.

OBJECTIVES: This study aimed to assess and compare age estimation on panoramic radiography using the Kvaal method and machine learning (ML). METHODS AND MATERIALS: 554 panoramic radiographs were selected from a Brazilian practice. To estimate age using the Kvaal method, the following measurements were performed on the upper left central incisors and canines: tooth, pulp and root length; root and pulp width at three different levels: at the enamel-cementum junction (ECJ); midpoint between the enamel-cementum junction and; at the mid root level. For ML age estimation, radiomic, semantic and the radiomic-semantic attribute extractions were assessed. Nineteen semantic and 14 radiomic attributes and a single set of 33 semantic-radiomic attributes were extracted. Logistic Regression, Linear Regression, KNN, SVR, Decision Tree Reg, Random Forest Reg, Gradient Boost Reg e XG Boosting Reg were used for ML classification. For the Kvaal method, Mann-Whitney test, Spearman correlation coefficient, Student's t-test and linear regression with its respective coefficient of determination were used to estimate age and to assess data variability. RESULTS: Mean absolute error (MAE) and standard error estimate (SEE) were assessed. For the Kvaal method, upper incisors presented higher precision than canines (R²: 0.335, SSE: 7.108). Males presented better MAE and SEE values (5.29,6.96) than females (5.69,7.37). The radiomic-semantic attributes presented superior precision (MAE: 4.77) than the radiomic and semantic (MAE: 5.23) attributes. The XG Boosting Reg classifier performed better than the other six assessed classifiers (MAE: 4.65). ML (MAE: 4.77 presented higher age estimation precision than the Kvaal method (MAE: 5.68). CONCLUSION: The use of ML on panoramic radiographs can improve age estimation.

Diode laser on excision of giant peripheral odontogenic myxoma: a rare case report and literature review.

It was to report a rare case of peripheral odontogenic myxoma removed with high-power diode laser and to do an extensive review of studies of odontogenic cysts and tumors treated with high-power laser (HPL). This is a rare case of a 63-year-old male patient with a peripheral odontogenic myxoma measuring approximately 10 cm in the attached gingiva region of tooth 16 removed with a high-power diode laser (808 nm, 3 W, in continuous mode, under constant suction, with 400-µm optical fiber). A literature review was also carried out looking for articles that involved the use of HPL in the treatment of odontogenic cysts and tumors, without restriction of year or language. In the present case, there was no need for suturing, no postoperative discomfort, and minimal bleeding during the procedure. In a 12-month follow-up period, there were no signs of recurrence. Only two cases of intra-osseous odontogenic myxomas treated with HPL and 10 cases involving other odontogenic cysts and tumors were found. All studies showing HPL to be effective in treating these lesions. Despite the different types of lasers used and different parameters, it is observed that lasers are effective in the treatment of odontogenic lesions.

The influence of facial types on the morphology and location of the greater palatine foramen: a CBCT study.

OBJECTIVE: This study aimed to assess the morphology and location of the great palatine foramen (GPF) of different facial types using cone beam computed tomography (CBCT) scans. METHODS: Sixty CBCT scans were divided into: brachyfacial (n = 20), dolichofacial (n = 20) and mesofacial (n = 20) using Ricketts' VERT index for the determination of cephalometric facial type and imported into ImageJ software. GPF shape was characterized as: round, elongated in the anteroposterior direction (EAP), or elongated in the latero-medial direction (ELM). The distances between the GPF and the palatine suture (PS), the center of the GPF and the center incisive foramen (IF), the GPF and the palatine alveolar ridge (PAR), right side GPF (GPFr) and left side (GPFl) GPFs; and the angles formed from the intersection of the GPF, IF and PS were assessed. The position of the GPF was evaluated in relation to the molars. RESULTS: GPFr and GPFl mean distances from PAR presented higher values for dolichofacial patients (p < 0.05). GPFr and GPFl location distally to the third molar (3 M) was higher for brachyfacial type, while their location distally to the second molar was higher for mesofacial and between the mesial and distal surfaces of the 3 M for dolichofacial (p < 0.05). CONCLUSIONS: The GPF was more distant from the PAR in the dolichofacial-type group. The location of the GPF in relation to the molars varied according to the facial type. However, the morphology of the GPF was similar in the three facial types, and the elongated in the anteroposterior direction morphology was more frequent.

Artificial intelligence and infrared thermography as auxiliary tools in the diagnosis of temporomandibular disorder.

OBJECTIVE: To assess three machine learning (ML) attribute extraction methods: radiomic, semantic and radiomic-semantic association on temporomandibular disorder (TMD) detection using infrared thermography (IT); and to determine which ML classifier, KNN, SVM and MLP, is the most efficient for this purpose. METHODS AND MATERIALS: 78 patients were selected by applying the Fonseca questionnaire and RDC/TMD to categorize control patients (37) and TMD patients (41). IT lateral projections of each patient were acquired. The masseter and temporal muscles were selected as regions of interest (ROI) for attribute extraction. Three methods of extracting attributes were assessed: radiomic, semantic and radiomic-semantic association. For radiomic attribute extraction, 20 texture attributes were assessed using co-occurrence matrix in a standardized angulation of 0°. The semantic features were the ROI mean temperature and pain intensity data. For radiomic-semantic association, a single dataset composed of 28 features was assessed. The classification algorithms assessed were KNN, SVM and MLP. Hopkins's statistic, Shapiro-Wilk, ANOVA and Tukey tests were used to assess data. The significance level was set at 5% (p < 0.05). RESULTS: Training and testing accuracy values differed statistically for the radiomic-semantic association (p = 0.003). MLP differed from the other classifiers for the radiomic-semantic association (p = 0.004). Accuracy, precision and sensitivity values of semantic and radiomic-semantic association differed statistically from radiomic features (p = 0.008, p = 0.016 and p = 0.013). CONCLUSION: Semantic and radiomic-semantic-associated ML feature extraction methods and MLP classifier should be chosen for TMD detection using IT images and pain scale data. IT associated with ML presents promising results for TMD detection.

Mandibular canal bifurcation and trifurcation: case report from a finding obtained through cone beam computed tomography / Bifurcação e trifurcação do canal mandibular: relato de caso a partir de um achado em tomografia computadorizada de feixe de cone

Aim: This case report aims to demonstrate a rare mandibular canal (MC) variation, presenting right trifurcation and left bifurcation through Cone-Beam Computed Tomography (CBCT). Case report: A 26-year-old female patient with no systemic disorders was referred for surgical removal of the lower third molars due to the presence of painful symptoms. CBCT was requested to evaluate the relationship between third molars and the mandibular canal and to guide the surgical planning. Tomographic volume was analyzed through the Sidexis software (Sirona Dental Systems, Bernsheim, Germany). During the analysis of tomographic sections, it was possible to observe the presence of bilateral MC variations. Bifurcation of the right MC and trifurcation of the left MC were observed. Conclusion: The present report highlighted the importance of CBCT for the diagnosis of anatomical changes, such as MC trifurcation.

Objetivo: Este relato tem por objetivo descrever uma rara variação do canal mandibular (CM) apresentando trifurcação direita e bifurcação esquerda, por meio da Tomografia Computadorizada de Feixe Cônico (TCFC). Relato do caso: Paciente do sexo feminino, 26 anos de idade, sem comprometimento sistêmico, foi encaminhada para remoção cirúrgica dos terceiros molares inferiores devido a presença de sintomatologia dolorosa. Foi solicitada uma TCFC para avaliar a relação entre terceiros molares e o canal mandibular, para orientar o planejamento cirúrgico. O volume tomográfico foi analisado por meio do software Sidexis (Sirona Dental Systems, Bernsheim, Alemanha). Durante a análise dos cortes tomográficos, foi possível observar a presença de variações do CM bilateralmente. Observou-se bifurcação do CM direito e trifurcação do CM esquerdo. Conclusão: O presente relato destacou a importância da TCFC para o diagnóstico das alterações anatômicas, como a trifurcação do canal mandibular.

Influence of size of field of view (FOV), position within the FOV, and scanning mode on the detection of root fracture and observer's perception of artifacts in CBCT images.

OBJECTIVE: To assess the influence of field of view (FOV) size, scanning position within the FOV and scanning mode on the detection of root fracture and artifact perception. METHODS: Forty single-rooted premolars restored with NiCr and AgPd posts were divided into two groups: fractured and sound. All teeth were scanned using four CBCT scanning protocols varying FOV sizes (80 × 80 mm and 50 × 55 mm) and scanning modes (Standard and High Definition). The sample was positioned within the FOV in two pre-set positions (central and lateral) and in four positions established by the operator (quadrants). Detection of root fracture and artifact perception were assessed by two observers using 5-point and 4-point scales. Sensitivity, specificity, accuracy, and AUC values were calculated and compared by ANOVA two-way and Tukey's test. Chi-square and Fisher's exact test were used to assess artifact perception. The level of significance was set at p < 0.05. RESULTS: The central position within the FOV presented higher sensitivity, specificity, accuracy, and AUC values and differed from the lateral position within the FOV for the studied metal posts (p<0.05). Quadrant 2 presented the best sensitivity, accuracy, and AUC values (p<0.05). The lateral position within the FOV, AgPd posts, quadrants 1 and 3 and protocols 1 (SM, 80 × 80) and 2 (HD, 80× 80) presented higher frequency of artifacts classified as "severe". CONCLUSION: Positioning the object in the center or closer to the anterior periphery of the FOV while using a small FOV improved the detection of root fracture and decreased artifact perception.

Influence of tooth position within the field of view on the intensity of cone-beam computed tomographic imaging artifacts when assessing teeth restored with various intracanal materials.

PURPOSE: This study aimed to quantify the influence of tooth position within the field-of-view (FOV) on cone-beam computed tomography (CBCT) imaging artifacts' intensity when assessing teeth restored with various intracanal materials. MATERIALS AND METHODS: Seventy single-rooted teeth were divided into 7 groups (10 teeth per group): NiCr post (NC), AgPd post (AP), metal core fiberglass post (MCFG), fiberglass post (FG), anatomical fiberglass post (AFG), fiberglass post cemented with core build-up cement (FGCo), and anatomical fiberglass post cemented with core build-up cement (AFGCo). All posts were cemented using a regular dual-curing resin cement (Allcem), except FGCo and AFGCo which were cemented with a core build-up dual-curing resin cement (AllcemCore). Each tooth was scanned on a CS9000 in 5 positions within the FOV: a central position, anterior horizontal peripheral, peripheral superior, peripheral inferior, and posterior horizontal peripheral position. Hyperdense, hypodense, remaining teeth areas and ROI areas were quantitatively analyzed using ImageJ software. RESULTS: Posterior horizontal peripheral position increased the intensity of artifacts on FGCo and AFGCo post groups (P<0.05), and specifically the hypodense artifact intensity on FG and AFG post groups (P<0.05). NC and AP groups presented greater intensity of artifacts than any other post groups (P<0.05). CONCLUSION: Artifact intensity increases in the presence of high atomic number materials and when the object is not centered within the FOV. The impact of positioning within the FOV on artifact was greater for fiberglass posts cemented with core build-up dual-curing cement than for metal posts and fiberglass posts cemented with regular dual-curing cement.

Mandibular incisive canal-related prevalence, morphometric parameters, and implant placement implications: a multicenter study of 847 CBCT scans

BACKGROUND: This study evaluated the epidemiological and morphological features of the mandibular incisive canal (MIC) using cone beam computed tomography (CBCT) in a significant sample of subjects in Brazil. MATERIAL AND METHODS: This retrospective, multicenter study assessed 847 CBCT scans performed at four oral imaging centers. The sample comprised CBCT images acquired from dentate individuals who presented at least from tooth 35 to tooth 45 in the anterior mandible region. Data regarding patient sex and age, and MIC linear measurements (length and diameter in mm), anatomical distances (to the alveolar, buccal and lingual cortexes, inferior border of the mandible, and adjacent teeth apexes), and location were obtained. RESULTS: The MIC was more prevalent in women (76.3% [p < 0.001]) between the fourth and sixth decades of life (p < 0.001). It was present bilaterally (p < 0.001) and exhibited a mean length of 7.7 mm (standard deviation [SD]=3.7 mm). Spearman correlation and logistic regression analysis revealed collinearity between age and linear measurements (p < 0.05). The mean distances varied from the initial to the final portion of the MIC, respectively, in relation to the buccal cortex (mean = 2.6 mm, SD = 1.27; mean=3.96 mm; SD =1 .43), to lingual cortex (mean=5.13 mm; SD=1.7; mean = 4.61 mm, SD = 1.65), and to the inferior mandibular border (mean = 9.32 mm, SD = 1.92; mean=8.76 mm, SD = 2.07 mm). The difference in the proximity of the MIC to the apex of the inferior lateral incisor was statistically significant (p < 0.05). CONCLUSIONS: Results of this study revealed a high prevalence of MIC with a bilateral pattern in women who were between the fourth and sixth decades of life. Both the distance between the MIC and the lingual cortex of the mandibular alveolar bone, and the diameter of the MIC, decreased as its trajectory assumed a more anterior position

No disponible

Root Canal Treatment and Apical Periodontitis in a Brazilian Population with Type 1 Diabetes Mellitus: A Cross-sectional Paired Study.

INTRODUCTION: This study radiographically analyzed the prevalence of root canal treatment (RCT) and apical periodontitis (AP) in type 1 diabetes mellitus (T1DM) and nondiabetic individuals and its association with the history/current status of T1DM. METHODS: In a cross-sectional paired study, the radiographic records of 50 individuals with T1DM and 100 age- and sex-matched nondiabetic subjects were examined. The presence of RCT and AP was evaluated. Information regarding the history and current status of T1DM was collected from the medical records of each patient. RESULTS: One or more RCTs were found in 76% and 44% of diabetic and nondiabetic subjects, respectively (P = .000). AP in 1 or more teeth was found in most T1DM patients (58%) and in 15% of the control subjects (P = .000). One or more RCTs associated with AP were found in 52% and 8% of T1DM and nondiabetic subjects, respectively (P = .000). Bivariate logistic regression analyses suggested that RCT (odds ratio [OR] = 10.435, P = .000), AP (OR = 3.508, P = .011), and RCT + AP (OR = 7.220, P = .000) were significantly associated with the presence of T1DM. Multivariate logistic regression showed that among T1DM individuals, there is an association between 11-15 years of diagnosis time and at least 1 RCT (OR = 46.316, P = .038) and an association between T1DM control and at least 1 tooth with AP (OR = 15.611, P = .016). CONCLUSIONS: RCT, AP, and RCT with AP were more prevalent in individuals with T1DM than in nondiabetic individuals. RCT and AP were associated with the presence of T1DM, specifically RCT with diagnostic time and AP with glycemic control.

Effect of different exposure times on caries detection and pixel value in a wireless digital system.

OBJECTIVES: : The aim of this study was to assess, using the CDR Wireless®, the effect of different exposure times on caries detection and pixel intensity values. MATERIALS AND METHODS: Forty teeth were x-rayed using a Schick CDR Wireless sensor at eight different exposure times - 0.06, 0.10, 0.13, 0.16, 0.20, 0.25, 0.30, and 0.32 s. Four observers evaluated the images for presence of carious lesions scoring proximal surfaces of each tooth on a 5-point scale. Scores were compared to histological sections of the teeth. Accuracy was evaluated by means of ROC curve analysis. Radiographs of an aluminum step wedge were obtained using the same eight exposure times. Pixel intensity measurements were obtained, and mean pixel values were statistically analyzed using linear regression. RESULTS: The Az for each exposure time varied from 0.53 to 0.62. Two-way analysis of variance and Tukey test demonstrated that the exposure time of 0.25 s presented the best result and was significantly higher than 0.30 s and 0.35 s. In regard to mean pixel values, two different behaviors were observed, and the exposure time of 0.20 s presented mean pixel values in both phases. CONCLUSION: The performance of the exposure times from 0.06 s to 0.25 s was satisfactory for proximal caries detection, and 0.25 s is the best as indicated for this finality. CLINICAL RELEVANCE: Considering that a reduction of exposure time represents a reduction of patient exposure dose, and this reduction cannot neglect image quality, the behavior of any digital system must be carefully evaluated.

Correlation between temporomandibular joint morphometric measurements and gender, disk position, and condylar position.

OBJECTIVE: The aim of this study was to correlate the morphometric measurements of the temporomandibular joint, including condylar size, joint space, and articular eminence size, with gender, disk position, and condylar position by using magnetic resonance imaging. STUDY DESIGN: Overall, 93 patients were evaluated (31.2% males and 68.8% females; age 18-81 years; mean age 41 years). Condylar size (D1), joint space (D2), and eminence size (D3) were measured. Correlations with gender, disk position, and condylar position were calculated. RESULTS: A statistically significant correlation was found between D2 and gender, with the joint space being significantly larger in the male group (P = .05). There were correlations between D2 and the position of the disk and the position of the condyle (P ≤ .05). CONCLUSIONS: The results indicate a correlation between male gender and larger joint space. In addition, we found that the joint space size influences the articular disk and condyle position, which can cause disk displacement.

Pharmacological Therapy for Treatment of Recurrent Central Giant Cell Lesion in a Child.

A central giant cell lesion (CGCL) is a reactive lesion that causes destruction of bone and soft tissues and has a high recurrence rate. Only 16 percent of CGCLs are observed in children. Treatment is determined by the aggressiveness and size of the lesion and it usually involves curettage or resection. Alternative treatments, such as nasal calcitonin and intralesional corticosteroid injections, are also used. The purposes of this paper are: (1) to report the case of a nine-year-old patient who presented with a CGCL; (2) to describe its pharmacological management; and (3) to review the literature about the clinical, radiographic, and histological features of CGCL.

Is infrared thermography effective in the diagnosis of temporomandibular disorders? A systematic review.

OBJECTIVE: The aim of this study was to systematically review the scientific efficacy of infrared thermography (IT) on the diagnosis of temporomandibular joint disorders (TMDs). STUDY DESIGN: An electronic search was performed in 8 databases for publications up to May 2018. Additionally, a hand search of the reference lists was conducted. There were no restrictions on language or on year of publication. Two independent reviewers selected the studies, reviewed the abstract information, and assessed the quality. The methodology of the included articles was evaluated by using the QUADAS-2 tool. RESULTS: Nine studies fulfilled the eligibility criteria and were included in the systematic review. Four studies concluded that IT presents low accuracy or is not an accurate instrument for TMD diagnosis, but there was substantial variation in sensitivity, specificity, and receiver operating characteristic curve values. Five studies concluded that IT appears to be promising or may be a complementary diagnostic aid in the evaluation of TMDs. These studies presented sensitivity values ranging from 70% to 90% and specificity values ranging from 62% to 92%. All studies were judged as being "at risk of bias" and as having "concerns regarding applicability." CONCLUSIONS: The literature is still lacking in sufficient number of studies regarding the reliability of IT for the diagnosis of TMDs.

Head and neck cancer, quality of life, and determinant factors: a novel approach using decision tree analysis.

OBJECTIVE: The goal of the present study was to investigate health-related quality of life (HRQoL) and oral health-related quality of life (OHRQoL) in patients under treatment for head and neck cancer and to identify the associated factors. STUDY DESIGN: A cross-sectional study was conducted with 102 patients undergoing treatment for head and neck cancer at 2 medical centers. Participants answered a sociodemographic questionnaire and the Brazilian versions of the Medical Outcomes Study 36 (SF-36) and the Oral Health Impact Profile (OHIP-14) questionnaires to assess HRQoL and OHRQoL, respectively. Clinical aspects, cancer staging, and treatment approach were also investigated. Descriptive and multivariate analyses were performed by using decision tree analysis with the Chi-square Automatic Interaction Detector (CHAID) algorithm. RESULTS: The decision tree revealed that reduced quality of life is associated with the clinical staging (adjusted P value = .035), patient's gender (adjusted P value = .028), and treatment approach (adjusted P value = .032). Female patients who are diagnosed with advanced head and neck cancer and undergo radiotherapy or chemotherapy are more likely to exhibit lower rates of quality of life. CONCLUSIONS: The results suggested that sociodemographic characteristics, clinical staging, and treatment approach can exert a significant influence on the quality of life of patients with head and neck cancer.

Comparison of microtomography and optical coherence tomography on apical endodontic filling analysis.

OBJECTIVES: To comparein vitro differences in the apical filling regarding working length (WL) change and presence of voids and to validate optical coherence tomography (OCT) in comparison with computerized microtomography (µCT) for the detection of failures in the apical filling. METHODS: Forty-five uniradicular teeth with round canals, divided into groups (n = 15) following the obturation protocols: LC (lateral condensation), TMC (thermomechanical compaction) and SC (single cone). Samples were scanned using µCT (parameters: 80 kV, 222 µA, and resolution of 11 µm), OCT (parameters: SSOCT, 1300 nm and axial resolution of 12 µm), and periapical digital radiography. The images were analyzsed by two blind and calibrated observers using ImageJ software to measure the boundary of the obturation WL and voids presence. Categorical and metric data were submitted to inferential analysis, and the validity of the OCT as a diagnostic test was assessed with performance and reliability tests. RESULTS: The WL average remained constant for all obturation techniques and image methods. OCT showed adequate sensitivity and specificity to detect voids in the WL of apical obturations in vitro in comparison with µCT. Both image methods found a higher number of voids for LC technique (µCT p = 0.011/OCT p = 0.002). CONCLUSIONS: OCT can be used in apical obturation voids assessment and the LC technique revealed more voids with larger dimensions.