ABSTRACT
The COVID-19 pandemic has highlighted the need to take advantage of specific and effective patient telemonitoring platforms, with specific reference to the constant monitoring of vital parameters of patients most at risk. Among the various applications developed in Italy, certainly there is reCOVeryaID, a web application aimed at remotely monitoring patients potentially, currently or no longer infected with COVID-19. Therefore, in this paper we present a system model, consisting of a multi-platform intelligent telemonitoring application, that enables remote monitoring and provision of integrated home care to both patients symptomatic, asymptomatic and pre-symptomatic with severe acute respiratory infectious disease or syndrome caused by viruses belonging to the Coronavirus family, as well as simply to people with respiratory problems and/or related diseases (chronic obstructive pulmonary disease or asthma). In fact, in this paper we focus on exposing the technologies and various functionalities offered by the system, which constitute the practical implementation of the theoretical framework described in detail in another paper. Specifically, the reCOVeryaID telemonitoring application is a stand-alone, knowledge base-supported application that can promptly react and inform physicians if dangerous trends in a patient's short- and long-term vital signs are detected, thus enabling them to be monitored continuously, both in the hospital and at home. The paper also reports an evaluation of user satisfaction, carried out by actual patients and medical doctors.
ABSTRACT
Scientists around the world have long aimed to produce miniature robots that can be controlled inside the human body to aid doctors in identifying and treating diseases. Such microrobots hold the potential to access hard-to-reach areas of the body through the natural lumina. Wireless access has the potential to overcome drawbacks of systemic therapy, as well as to enable completely new minimally invasive procedures. The aim of this review is fourfold: first, to provide a collection of valuable anatomical and physiological information on the target working environments together with engineering tools for the design of medical microrobots; second, to provide a comprehensive updated survey of the technological state of the art in relevant classes of medical microrobots; third, to analyze currently available tracking and closed-loop control strategies compatible with the in-body environment; and fourth, to explore the challenges still in place, to steer and inspire future research.
Subject(s)
Equipment Design , Robotics , Humans , Robotics/instrumentation , Biomedical Engineering/methods , Wireless Technology , Robotic Surgical Procedures/methods , Robotic Surgical Procedures/instrumentation , MiniaturizationABSTRACT
Implantable neural interfaces with the central and peripheral nervous systems are currently used to restore sensory, motor, and cognitive functions in disabled people with very promising results. They have also been used to modulate autonomic activities to treat diseases such as diabetes or hypertension. Here, this study proposes to extend the use of these technologies to (re-)establish the connection between new (transplanted or artificial) organs and the nervous system in order to increase the long-term efficacy and the effective biointegration of these solutions. In this perspective paper, some clinically relevant applications of this approach are briefly described. Then, the choices that neural engineers must implement about the type, implantation location, and closed-loop control algorithms to successfully realize this approach are highlighted. It is believed that these new "organ neuroprostheses" are going to become more and more valuable and very effective solutions in the years to come.
ABSTRACT
Simulation in healthcare has already demonstrated extraordinary potential in high-income countries. However, to date, few authors have explored the possibility of applying simulation-based training in African settings, highlighting the necessity of need-based training protocols capable of addressing economic, social, and cultural aspects. In this framework, this research investigates the main features of a simulation training course on umbilical cord care and placenta management should be considered effective and sustainable in an African healthcare environment. Local facilitators were identified as the best resources for defining course contents and providing technical lectures to mitigate cultural, linguistic, and social issues. For the training program, the design of a new low-cost medium-fidelity simulator was explored and a preliminary evaluation was performed. Finally, the propensity of 25 students to attend a simulation training course was investigated using a questionnaire. The attitude of the enrolled students was positive, endorsing the future introduction of simulation training into the educational offers of Ethiopian colleges.
Subject(s)
Delivery of Health Care , Simulation Training , Female , Pregnancy , Humans , Students , Clinical CompetenceABSTRACT
Endovascular intervention is a minimally invasive method for treating cardiovascular diseases. Although fluoroscopy, known for real-time catheter visualization, is commonly used, it exposes patients and physicians to ionizing radiation and lacks depth perception due to its 2D nature. To address these limitations, a study was conducted using teleoperation and 3D visualization techniques. This in-vitro study involved the use of a robotic catheter system and aimed to evaluate user performance through both subjective and objective measures. The focus was on determining the most effective modes of interaction. Three interactive modes for guiding robotic catheters were compared in the study: 1) Mode GM, using a gamepad for control and a standard 2D monitor for visual feedback; 2) Mode GH, with a gamepad for control and HoloLens providing 3D visualization; and 3) Mode HH, where HoloLens serves as both control input and visualization device. Mode GH outperformed other modalities in subjective metrics, except for mental demand. It exhibited a median tracking error of 4.72 mm, a median targeting error of 1.01 mm, a median duration of 82.34 s, and a median natural logarithm of dimensionless squared jerk of 40.38 in the in-vitro study. Mode GH showed 8.5%, 4.7%, 6.5%, and 3.9% improvements over Mode GM and 1.5%, 33.6%, 34.9%, and 8.1% over Mode HH for tracking error, targeting error, duration, and dimensionless squared jerk, respectively. To sum up, the user study emphasizes the potential benefits of employing HoloLens for enhanced 3D visualization in catheterization. The user study also illustrates the advantages of using a gamepad for catheter teleoperation, including user-friendliness and passive haptic feedback, compared to HoloLens. To further gauge the potential of using a more traditional joystick as a control input device, an additional study utilizing the Haption VirtuoseTM robot was conducted. It reveals the potential for achieving smoother trajectories, with a 38.9% reduction in total path length compared to a gamepad, potentially due to its larger range of motion and single-handed control.
ABSTRACT
The number of robot-assisted minimally invasive surgeries is increasing annually, together with the need for dedicated and effective training. Surgeons need to learn how to address the novel control modalities of surgical instruments and the loss of haptic feedback, which is a common feature of most surgical robots. High-fidelity physical simulation has proved to be a valid training tool, and it might help in fulfilling these learning needs. In this regard, a high-fidelity sensorized simulator of vascular structures was designed, fabricated and preliminarily validated. The main objective of the simulator is to train novices in robotic surgery to correctly perform vascular resection procedures without applying excessive strain to tissues. The vessel simulator was integrated with soft strain sensors to quantify and objectively assess manipulation skills and to provide real-time feedback to the trainee during a training session. Additionally, a portable and user-friendly training task board was produced to replicate anatomical constraints. The simulator was characterized in terms of its mechanical properties, demonstrating its realism with respect to human tissues. Its face, content and construct validity, together with its usability, were assessed by implementing a training scenario with 13 clinicians, and the results were generally positive.
Subject(s)
Robotics , Humans , Computer Simulation , Physical Examination , Learning , Feedback , Clinical CompetenceABSTRACT
How and when the forces are applied during neonatal intubation are currently unknown. This study investigated the pattern of the applied forces by using sensorized laryngoscopes during the intubation process in a neonatal manikin. Nine users of direct laryngoscope and nine users of straight-blade video laryngoscope were included in a neonatal manikin study. During each procedure, relevant forces were measured using a force epiglottis sensor that was placed on the distal surface of the blade. The pattern of the applied forces could be divided into three sections. With the direct laryngoscope, the first section showed either a quick rise of the force or a discontinuous rise with several peaks; after reaching the maximum force, there was a sort of plateau followed by a quick drop of the applied forces. With the video laryngoscope, the first section showed a quick rise of the force; after reaching the maximum force, there was an irregular and heterogeneous plateau, followed by heterogeneous decreases of the applied forces. Moreover, less forces were recorded when using the video laryngoscope. Conclusions: This neonatal manikin study identified three sections in the diagram of the forces applied during intubation, which likely mirrored the three main phases of intubation. Overall, the pattern of each section showed some differences in relation to the laryngoscope (direct or video) that was used during the procedure. These findings may provide useful insights for improving the understanding of the procedure. What is Known: ⢠Neonatal intubation is a life-saving procedure that requires a skilled operator and may cause direct trauma to the tissues and precipitate adverse reactions. ⢠Intubation with a videolaryngoscope requires less force than with a direct laryngoscope, but how and when the forces are applied during the whole neonatal intubation procedure are currently unknown. What is New: ⢠Forces applied to the epiglottis during intubation can be divided into three sections: (i) an initial increase, (ii) a sort of plateau, and (iii) a decrease. ⢠The pattern of each section shows some differences in relation to the laryngoscope (direct or videolaryngoscope) that is used during the procedure.
Subject(s)
Intubation, Intratracheal , Laryngoscopes , Infant, Newborn , Humans , Intubation, Intratracheal/methods , Laryngoscopy/methods , ManikinsABSTRACT
The Human Machine Interface (HMI) of intraluminal robots has a crucial impact on the clinician's performance. It increases or decreases the difficulty of the tasks, and is connected to the users' physical and mental stress. OBJECTIVE: This article presents a framework to compare and evaluate different HMIs for robotic colonoscopy, with the objective of identifying the optimal HMI that minimises the clinician's effort and maximises the clinical outcomes. METHODS: The framework comprises a 1) a virtual simulator (clinically validated), 2) wearable sensors measuring the cognitive load, 3) a data collection unit of metrics correlated to the clinical performance, and 4) questionnaires exploring the users' impressions and perceived stress. The framework was tested with 42 clinicians investigating the optimal device for tele-operated control of robotic colonoscopes. Two control devices were selected and compared: a haptic serial-kinematic device and a standard videogame joypad. RESULTS: The haptic device was preferred by the endoscopists, but the joypad enabled better clinical performance and reduced cognitive and physical load. CONCLUSION: The framework can be used to evaluate different aspects of a HMI, both hardware and software, and determine the optimal HMI that can reduce the burden on clinicians while improving the clinical outcome. SIGNIFICANCE: The findings of this study, and of future studies performed with this framework, can inform the design and development of HMIs for intraluminal robots, leading to improved clinical performance, reduced physical and mental stress for clinicians, and ultimately better patient outcomes.
Subject(s)
Robotics , Humans , Software , Colonoscopy , Physical ExaminationABSTRACT
BACKGROUND: Among the different factors affecting socket comfort, the pressure applied on residual limb tissues is a crucial parameter for the success or failure of any prosthetic device. However, only a few incomplete data are available on people with transfemoral amputation, in this regard. This work aims at filling this gap in the literature. METHODS: Ten people with transfemoral amputation wearing 3 different socket designs were recruited in this study: 2 ischial containment sockets featured by proximal trim lines that contain the ischial tuberosity and ramus and greater trochanter, 2 subischial sockets with proximal trim lines under the ischium level, and 6 quadrilateral sockets with proximal trim lines that contain the greater trochanter and create a horizontal seat for the ischial tuberosity. The pressure values at the anterior, lateral, posterior, and medial areas of the socket interface were recorded during 5 locomotion tasks (ie, horizontal, ascent, and descent walking, upstairs and downstairs) by using an F-Socket System (Tekscan Inc., Boston, MA). Gait segmentation was performed by exploiting plantar pressure, which was acquired by an additional sensor under the foot. Mean and standard deviation of minimum and maximum values were calculated for each interface area, locomotion task, and socket design. The mean pressure patterns during different locomotion tasks were reported, as well. RESULTS: Considering all subjects irrespective of socket design, the mean pressure range resulted 45.3 (posterior)-106.7 (posterior) kPa in horizontal walking; 48.3 (posterior)-113.8 (posterior) kPa in ascent walking; 50.8 (posterior)-105.7 (posterior) kPa in descent walking; 47.9 (posterior)-102.9 (lateral) kPa during upstairs; and 41.8 (posterior)-84.5 (anterior) kPa during downstairs. Qualitative differences in socket designs have been found. CONCLUSIONS: These data allow for a comprehensive analysis of pressures acting at the tissue-socket interface in people with transfemoral amputation, thus offering essential information for the design of novel solutions or to improve existing ones, in this field.
Subject(s)
Amputation Stumps , Artificial Limbs , Humans , Prosthesis Design , Amputation, Surgical , Femur/surgeryABSTRACT
Over the past decade, there has been a growing interest in the development of an artificial pancreas for intraperitoneal insulin delivery. Intraperitoneal implantable pumps guarantee more physiological glycemic control than subcutaneous wearable ones, for the treatment of type 1 diabetes. In this work, a fully implantable artificial pancreas refillable by ingestible pills is presented. In particular, solutions enabling the communication between the implanted pump and external user interfaces and novel control algorithms to intraperitoneally release an adequate amount of insulin based on glycemic data are shown. In addition, the powering and the wireless battery recharging are addressed. Specifically, the design and optimization of a customized transcutaneous energy transfer with two independent wireless channels are presented. The system was tested in terms of recharging efficacy, possible temperature rise within the body, during the recharging process and reliability of the wireless connection in the air and in the presence of ex vivo tissues.Clinical Relevance- This work aims to improve the control, battery recharging, and wireless communication of a fully implantable artificial pancreas for type 1 diabetes treatment.
Subject(s)
Diabetes Mellitus, Type 1 , Pancreas, Artificial , Humans , Diabetes Mellitus, Type 1/drug therapy , Reproducibility of Results , Insulin , Prostheses and ImplantsABSTRACT
Artificial intelligence (AI) applications in medical robots are bringing a new era to medicine. Advanced medical robots can perform diagnostic and surgical procedures, aid rehabilitation, and provide symbiotic prosthetics to replace limbs. The technology used in these devices, including computer vision, medical image analysis, haptics, navigation, precise manipulation, and machine learning (ML) , could allow autonomous robots to carry out diagnostic imaging, remote surgery, surgical subtasks, or even entire surgical procedures. Moreover, AI in rehabilitation devices and advanced prosthetics can provide individualized support, as well as improved functionality and mobility (see the figure). The combination of extraordinary advances in robotics, medicine, materials science, and computing could bring safer, more efficient, and more widely available patient care in the future. -Gemma K. Alderton.
ABSTRACT
This Editorial highlights some current challenges and emerging solutions in wearable sensors, a maturing field where interdisciplinary crosstalk is of paramount importance. Currently, investigation efforts are aimed at expanding the application scenarios and at translating early developments from basic research to widespread adoption in personal health monitoring for diagnostic and therapeutic purposes. This translation requires addressing several old and new challenges that are summarized in this editorial. The special issue "Emerging technologies in wearable sensors" includes four selected contributions from leading researchers, exploring the topic from different perspectives. The aim is to provide the APL Bioengineering readers with a solid and timely overall vision of the field and with some recent examples of wearable sensors, exploring new research avenues.
ABSTRACT
BACKGROUND: Urinary incontinence (UI) is a common and frustrating condition that affects patients' quality of life as well as the Healthcare systems. Currently, the most severe cases of UI are treated using implanted, invasive artificial sphincters. We propose an innovative, minimally invasive magnetic endourethral sphincter for the treatment of stress UI (SUI) in patients for whom previous medical and surgical treatments have failed. METHODS: Six patients with severe SUI were enrolled at a single center and underwent cystoscopic sphincter implantation. After 10 days, correct device position was confirmed by ultrasonography. The sphincter was explanted after 28 days. RESULTS: In all patients, the sphincter was successfully implanted using an endoscopic approach. One patient reached the end of the pilot test (28 days) with the sphincter correctly placed. Patients' responses on the International Consultation on Incontinence Questionnaire-Urinary Incontinence Short Form questionnaire improved from a score of 18 out of 21 at the screening visit (UI without reasons) to a score of 3 out of 21 (almost perfect continence). No major pain and discomfort were reported. CONCLUSIONS: This study showed the feasibility of sphincter implantation, explantation, and overall tolerability, although a redesign of the sphincter distal part is needed.
Subject(s)
Urinary Incontinence, Stress , Urinary Incontinence , Humans , Urinary Incontinence, Stress/surgery , Pilot Projects , Quality of Life , Treatment Outcome , Magnetic PhenomenaABSTRACT
PURPOSE: In adult mannequins, videolaryngoscopy improves glottic visualization with lower force applied to upper airway tissues and reduced task workload compared with direct laryngoscopy. This trial compared oropharyngeal applied forces and subjective workload during direct vs indirect (video) laryngoscopy in a neonatal mannequin. METHODS: We conducted a randomized crossover trial of intubation with direct laryngoscopy, straight blade videolaryngoscopy, and hyperangulated videolaryngoscopy in a neonatal mannequin. Thirty neonatal/pediatric/anesthesiology consultants and residents participated. The primary outcome measure was the maximum peak force applied during intubation. Secondary outcome measures included the average peak force applied during intubation, time needed to intubate, and subjective workload. RESULTS: Direct laryngoscopy median forces on the epiglottis were 8.2 N maximum peak and 6.8 N average peak. Straight blade videolaryngoscopy median forces were 4.7 N maximum peak and 3.6 N average peak. Hyperangulated videolaryngoscopy median forces were 2.8 N maximum peak and 2.1 N average peak. The differences were significant between direct laryngoscopy and straight blade videolaryngoscopy, and between direct laryngoscopy and hyperangulated videolaryngoscopy. Significant differences were also found in the top 10th percentile forces on the epiglottis and palate, but not in the median forces on the palate. Time to intubation and subjective workload were comparable with videolaryngoscopy vs direct laryngoscopy. CONCLUSIONS: The lower force applied during videolaryngoscopy in a neonatal mannequin model suggests a possible benefit in reducing potential patient harm during intubation, but the clinical implications require assessment in future studies. REGISTRATION: ClinicalTrials.gov (NCT05197868); registered 20 January 2022.
RéSUMé: OBJECTIF: Sur les mannequins adultes, la vidéolaryngoscopie améliore la visualisation glottique avec une force plus faible appliquée aux tissus des voies aériennes supérieures et une charge de travail réduite par rapport à la laryngoscopie directe. Cette étude a comparé les forces appliquées sur la zone oropharyngée et la charge de travail subjective au cours d'une laryngoscopie directe vs indirecte (vidéolaryngoscopie) sur un mannequin néonatal. MéTHODE: Nous avons réalisé une étude randomisée croisée d'intubation par laryngoscopie directe, vidéolaryngoscopie à lame droite et vidéolaryngoscopie avec lame hyperangulée sur un mannequin néonatal. Trente spécialistes diplômés et résidents en néonatologie, en pédiatrie et en anesthésiologie y ont participé. Le critère d'évaluation principal était le pic de force maximal obtenu pendant l'intubation. Les critères d'évaluation secondaires comprenaient la force maximale moyenne appliquée pendant l'intubation, le temps nécessaire pour intuber et la charge de travail subjective. RéSULTATS: Les forces médianes appliquées sur l'épiglotte lors de la laryngoscopie directe étaient de 8,2 N pour le pic maximum et de 6,8 N pour le pic moyen. Les forces médianes appliquées lors de la vidéolaryngoscopie à lame droite étaient de 4,7 N pour le pic maximum et de 3,6 N pour le pic moyen. Les forces médianes appliquées lors de la vidéolaryngoscopie avec lame hyperangulée étaient de 2,8 N pour le pic maximum et de 2,1 N pour le pic moyen. Les différences étaient significatives entre la laryngoscopie directe et la vidéolaryngoscopie à lame droite, et entre la laryngoscopie directe et la vidéolaryngoscopie avec lame hyperangulée. Des différences significatives ont également été observées dans le 10e percentile supérieur des forces sur l'épiglotte et le palais, mais pas dans les forces médianes sur le palais. Le délai d'intubation et la charge de travail subjective étaient comparables entre la vidéolaryngoscopie et la laryngoscopie directe. CONCLUSION: La force plus faible appliquée lors de la vidéolaryngoscopie dans un modèle de mannequin néonatal suggère un avantage possible de réduction des lésions potentielles pour le patient pendant l'intubation, mais les implications cliniques doivent être évaluées dans des études futures. ENREGISTREMENT DE L'éTUDE: ClinicalTrials.gov (NCT05197868); enregistré le 20 janvier 2022.
Subject(s)
Laryngoscopes , Laryngoscopy , Humans , Infant, Newborn , Cross-Over Studies , Intubation, Intratracheal , Manikins , Video RecordingABSTRACT
Standard industrial robotic manipulators use well-established high performing technologies. However, such manipulators do not guarantee a safe Human-Robot Interaction (HRI), limiting their usage in industrial and medical applications. This paper proposes a novel local path planner for spherical wrist manipulators to control the execution of tasks where the manipulator number of joints is redundant. Such redundancy is used to optimize robot motion and dexterity. We present an intuitive parametrization of the end-effector (EE) angular motion, which decouples the rotation of the third joint of the wrist from the rest of the angular motions. Manipulator EE motion is controlled through a decentralized linear system with closed-loop architecture. The local planner integrates a novel collision avoidance strategy based on a potential repulsive vector applied to the EE. Contrary to classic potential field approaches, the collision avoidance algorithm considers the entire manipulator surface, enhancing human safety. The local path planner is simulated in three generic scenarios: (i) following a periodic reference, (ii) a random sequence of step signal references, and (iii) avoiding instantly introduced obstacles. Time and frequency domain analysis demonstrated that the developed planner, aside from better parametrizing redundant tasks, is capable of successfully executing the simulated paths (max error = 0.25°) and avoiding obstacles.
Subject(s)
Upper Extremity , Wrist , Humans , Rotation , Algorithms , Wrist JointABSTRACT
In bioinspired soft robotics, very few studies have focused on fluidic transmissions and there is an urgent need for translating fluidic concepts into realizable fluidic components to be applied in different fields. Nature has often offered an inspiring reference to design new efficient devices. Inspired by the working principle of a marine worm, the sipunculid species Phascolosoma stephensoni (Sipunculidae, Annelida), a soft linear fluidic actuator is here presented. The natural hydrostatic skeleton combined with muscle activity enables these organisms to protrude a part of their body to explore the surrounding. Looking at the hydrostatic skeleton and protrusion mechanism of sipunculids, our solution is based on a twofold fluidic component, exploiting the advantages of both pneumatic and hydraulic actuations and providing a novel fluidic transmission mechanism. The inflation of a soft pneumatic chamber is associated with the stretch of an inner hydraulic chamber due to the incompressibility of the liquid. Actuator stretch and forces have been characterized to determine system performance. In addition, an analytical model has been derived to relate the stretch ability to the inlet pressure. Three different sizes of prototypes were tested to evaluate the suitability of the proposed design for miniaturization. The proposed actuator features a strain equal to 40-50% of its initial length-depending on size-and output forces up to 18 N in the largest prototypes. The proposed bioinspired actuator expands the design of fluidic actuators and can pave the way for new approaches in soft robotics with potential application in the medical field.
Subject(s)
Musculoskeletal System , Robotics , Equipment Design , Skeleton , MiniaturizationABSTRACT
The gold standard treatment for bladder cancer is radical cystectomy that implies bladder removal coupled to urinary diversions. Despite the serious complications and the impossibility of controlled active voiding, bladder substitution with artificial systems is a challenge and cannot represent a real option, yet. In this article, we present hydraulic artificial detrusor prototypes to control and drive the voiding of an artificial bladder (AB). These prototypes rely on two actuator designs (origami and bellows) based either on negative or positive operating pressure, to be combined with an AB structure. Based on the bladder geometry and size, we optimized the actuators in terms of contraction/expansion performances, minimizing the liquid volume required for actuation and exploring different actuator arrangements to maximize the voiding efficiency. To operate the actuators, an ad hoc electrohydraulic circuit was developed for transferring liquid between the actuators and a reservoir, both of them intended to be implanted. The AB, actuators, and reservoir were fabricated with biocompatible flexible thermoplastic materials by a heat-sealing process. We assessed the voiding efficiency with benchtop experiments by varying the actuator type and arrangement at different simulated patient positions (horizontal, 45° tilted, and vertical) to identify the optimal configuration and actuation strategy. The most efficient solution relies on two bellows actuators anchored to the AB. This artificial detrusor design resulted in a voiding efficiency of about 99%, 99%, and 89%, in the vertical, 45° tilted, and horizontal positions, respectively. The relative voiding time was reduced by about 17, 24, and 55 s compared with the unactuated bladder.
Subject(s)
Urinary Bladder Diseases , Urinary Bladder Neoplasms , Humans , Urinary Bladder , Urination , CystectomyABSTRACT
OBJECTIVE: To prove the potentialities of an integrated and sensorized childbirth platform as an innovative simulator for education of inexperienced gynecological and obstetrical medical students. METHODS: A total of 152 inexperienced medical students were recruited to a simulation program on labor progression evaluation. After an introductory lecture on basic concepts of labor and birth given by an expert gynecologist, three different gynecologic scenarios were simulated using both a traditional obstetric simulator and the innovative proposed platform, for a total of six tests for each student. A score was assigned for each performed scenario, based on its correctness. Self-assessment questionnaires were compiled before and after the simulation program for additional subjective assessment. RESULTS: Median score of the simulations performed with our platform was significantly higher than that of the simulations performed with a traditional simulator, for all the three experimented scenarios (P < 0.001). CONCLUSIONS: The use of a sensorized platform for labor progression allowed for an accurate and faster diagnosis if compared with a traditional simulator even for inexperienced operators, supporting its use in clinical training, which could be realistically introduced into the clinical practice for medical student education.