Comparator product issues for biowaiver implementation: the case of Fluconazole

The aim of this work was to assess if the commercially available Fluconazole drug products (Reference, Generic and Similar) would meet the biowaiver criteria from Food and Drug Administration (FDA) and Brazilian Agency for Health Surveillance (ANVISA) agencies. All formulations were evaluated considering the dissolution profile carried out in Simulated Gastric Fluid (SGF) pH 1.2, Acetate Buffer (AB) pH 4.5 and Simulated Intestinal Fluid (SIF) pH 6.8. The results demonstrated that all formulations fulfilled the 85% of drug dissolved at 30 min criterion in SGF pH 1.2. However, in AB pH 4.5 and SIF pH 6.8, some formulations, including the comparator, did not achieve this dissolution percentage. The discrepant dissolution profiles also failed the ƒ2 similarity factor analysis, since none of the formulations showed values between 50 and 100 in the three dissolution media. Comparative dissolution profiles were not similar, considering that the main issues concerning the dissolution were evidenced for the comparator product. Hence, a revision in the regulatory norms in order to establish criteria to switch the comparator could result in an increased application of drugs based on biowaiver criteria

Supersaturating drug delivery systems containing fixed-dose combination of two antihypertensive drugs: Formulation, in vitro evaluation and molecular metadynamics simulations.

The purpose of this study was to associate the poorly water-soluble antihypertensive drugs candesartan cilexetil (CC) and hydrochlorothiazide (HCTZ) as fixed-dose combination, in the form of ternary Amorphous Solid Dispersions (ASD), using hydroxypropylmethylcellulose acetate succinate (HPMCAS) type M as polymeric carrier. The potential of the system to generate and to maintain supersaturation of both drugs was also evaluated. The ASDs were prepared by ball milling technique and solid-state characterization was performed by differential scanning calorimetry (DSC), Fourier transformed infrared spectroscopy (FTIR) and X-ray powder diffraction (XRPD). Interaction between drugs and polymer in solid-state was evaluated by molecular metadynamics simulations. In vitro supersaturation profiles were determined in biorelevant medium. Physicochemical stability of ASDs was also evaluated under different storage conditions. Amorphization of both drugs was confirmed by solid-state characterization techniques. Molecular metadynamics simulations indicated that CC has stronger interaction with HMPCAS than HCTZ. In vitro supersaturation studies have shown that ternary ASDs could generate and maintain supersaturation of both drugs in biorelevant medium. The polymer reduced the desupersaturation of both drugs. Ternary ASDs also showed physicochemical stability over a period of 90 days, demonstrating the potential of the polymer in reducing the drugs recrystallization over the time. Ternary ASDs of CC, HCTZ and HPMCAS can be considered a promising system to associate the drugs as fixed-dose combinations. Also, these systems generate and maintain supersaturation of both drugs in biorelevant medium, with great storage stability. HPMCAS M was a good carrier for reducing the desupersaturation of associated HCTZ and CC.

Impact of Drug-Polymer Interaction in Amorphous Solid Dispersion Aiming for the Supersaturation of Poorly Soluble Drug in Biorelevant Medium.

The aim of this study was to investigate the influence of the production method and the polymeric carrier on the ability to generate and maintain the supersaturation of a poorly soluble drug in biorelevant medium. The amorphous solid dispersion of sulfamethoxazole, an antibacterial drug, was produced using two different polymers by spray-drying or hot melt extrusion methods. When Eudragit EPO was used, supersaturation was maintained up to 24 h for both techniques at all drug-polymer proportions. However, when Soluplus was employed in hot melt extrusion, a smaller amount of drug was dissolved when compared to the amorphous drug. The proportion of 3:7 drug-Eudragit EPO (w/w) produced by spray-drying presented a higher amount of drug dissolved in supersaturation studies and it was able to maintain the physical stability under different storage conditions throughout the 90-day evaluation. Supersaturation generation and system stability were found to be related to more effective chemical interaction between the polymer and the drug provided by the production method, as revealed by the 1D ROESY NMR experiment. Investigation of drug-polymer interaction is critical in supersaturating drug delivery systems to avoid crystallization of the drug and to predict the effectiveness of the system. Chemical compounds studied in this article: Sulfamethoxazole (PubChem CID: 4539) and Methacrylate copolymer - Eudragit EPO (PubChem CID: 65358).

Understanding the interaction between Soluplus® and biorelevant media components.

Soluplus® (polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer) is a solubilizing copolymer commonly applied as carrier in solid dispersions of poorly soluble drugs. This polymer is used to increase the apparent solubility of drugs with low aqueous solubility and consequently enhance drug absorption by the human gastrointestinal tract. To select the appropriate carrier to compose solid dispersions, in vitro supersaturation studies were applied as a pre-formulation tool, using different dissolution media. During in vitro supersaturation studies performed for the poorly soluble drug candesartan cilexetil, it was found that Soluplus® may interact with components of the biorelevant medium Fasted State Simulated Intestinal Fluid, lowering the drug apparent solubility. Dynamic Light Scattering and Transmission Electron Microscopy analyses were performed, as well as fluorescence measurements, aiming to characterize the interaction behavior and determine the polarity of the microenvironment. It was evidenced that Soluplus® interacted preferentially with lecithin, forming mixed micelles with a more polar microenvironment, which lowered the candesartan cilexetil solubilization capacity and consequently reduced its apparent solubility in the biorelevant medium. These findings are important to emphasize the key role of the media selection for in vitro solubility-supersaturation studies, where media that could mimic the human gastrointestinal environment are recommended.

New supersaturating drug delivery system as strategy to improve apparent solubility of candesartan cilexetil in biorelevant medium.

Candesartan cilexetil (CC) is a poorly soluble antihypertensive drug with in vivo absorption limited by its low aqueous solubility. Aiming to generate CC supersaturation as strategy to improve its absorption and bioavailability, amorphous solid dispersions (ASDs) of CC with hydroxypropylmethylcellulose acetate succinate type M (HPMCAS M) were developed and evaluated by in vitro and in vivo techniques. The ASDs were characterized by several solid-state techniques and evaluated regarding the supersaturation generation and maintenance under non-sink conditions in biorelevant medium. Stability studies at different storage conditions and in vivo pharmacodynamics studies were performed for the best formulation. The ASD developed presented appropriate drug amorphization, confirmed by solid state characterization, and CC apparent solubility increases around 85 times when compared to the pure crystalline drug. Supersaturation was maintained for up to 24 h in biorelevant medium. The in vivo pharmacodynamics studies revealed that ASD of CC with the polymer HPMCAS M presented an onset of action about four times faster when compared to the pure crystalline drug. The CC-HPMCAS ASD were successfully developed and demonstrated good physical stability under different storage conditions as well as promising results that indicated the ASD potential for improvement of CC biopharmaceutical properties.

Supersaturating drug delivery system of fixed drug combination: sulfamethoxazole and trimethoprim.

Background: The drug supersaturation in the intestinal lumen for few hours could result in high bioavailability. The goal of this study was the development of a supersaturating drug delivery system containing sulfamethoxazole and trimethoprim at fixed dose combination (sulfamethoxazole:trimethoprim 5:1 w/w). Methods: The amorphous solid dispersions were formed at three different proportions containing 30, 50 and 70% of Eudragit EPO in the formulation. Results: The supersaturation state is formed by the amorphous drugs produced by spray drying technique, and the maintenance of this state is due to the chemical interactions between the drugs and the polymer selected, which was observed in the fluorescence interaction studies realized between the drugs and the polymer. The Formulation containing 70% of the polymer was able to produce and maintain the supersaturated state of both drugs for 24 h. Solid state characterization demonstrated the amorphization of the drugs in the solid dispersion and indicated the hydrogen bond formation responsible for the improvement in the apparent solubility. This formulation presented an improved antibacterial activity when compared to the combination of the drugs. Conclusion: For the first time, a supersaturating drug delivery system was developed to the complementary antibacterial drugs. This ternary formulation is a powerful alternative to improve oral absorption of recognized safety drugs, reducing the dose and consequently the antibiotic resistance emergence.

A new and efficient carboxymethyl-hexanoyl chitosan/dodecyl sulfate nanocarrier for a pyrazoline with antileukemic activity.

We describe herein a chitosan nanocarrier for drug delivery applications obtained through the self-assembly of carboxymethyl-hexanoyl chitosan and dodecyl sulfate (CHC-SDS). Nanocapsules with spherical morphology were obtained in phosphate buffer at pH 7.4. These CHC-SDS nanocapsules showed no toxicity toward Jurkat cells (acute lymphoblastic leukemia) and were used to encapsulate a new pyrazoline (H3TM04) with antileukemia activity. The samples were characterized by dynamic light scattering (DLS) and Laser Doppler Micro-Electrophoresis. The encapsulation efficiency was higher than 96% (293.6 µg mL-1) and the H3TM04-loaded nanocapsules (CHC-SDS-H) had a negative surface charge (-29.8 ±â€¯0.7 mV) and hydrodynamic radius of around 84 nm. For the first time, CHC-SDS-H were formed and the antitumoral cancer activity was proved. The in vitro assays showed the controlled release of H3TM04 from the CHC-SDS-H nanocapsules in phosphate buffer pH 7.4. The H3TM04 release data were described by the power law model, indicating that H3TM04 delivery occurred via an erosion mechanism. The cytotoxicity assays with Jurkat and K-562 cells (acute myeloid leukemia) demonstrated that the CHC-SDS-H nanocapsule decreases the half maximal inhibitory concentration (IC50). The study showed that CHC-SDS nanocapsules represent a promising nanocarrier for pyrazoline derivates that could be applied in leukemia therapy.

Carbamide peroxide nanoparticles for dental whitening application: Characterization, stability and in vivo/in situ evaluation.

Carbamide peroxide is the popular home dental whitening agent. However, it has critical stability. Nanoparticles have been applied to develop products with advantages properties as better efficacy and stability increase. The aim of this study was the characterization of carbamide peroxide polymeric nanoparticles, their bleaching efficacy, effects on pulp damage and stability evaluation. Particle size demonstrated a spherical morphology and bimodal distribution (11 and 398 nm). Nanoparticles presented high entrapment efficiency (98.94%) and the zeta potential value was slightly positive (+10.26 mV). Regardless of the zeta potential, the steric effect may contribute to carbamide peroxide nanoparticle stabilization. The stability studies conducted at room temperature suggested that carbamide peroxide nanoparticles could maintain all the parameters evaluated (size, polydispersity index, zeta potential, entrapment efficiency, pH and content) for at least 90 days. Instability index was determined by dispersion analyzer (LUMiSizer ®), was 0.018, and the light transmission profile did not present sedimentation. Carbamide peroxide nanoparticles were able to prevent thermal degradation and photostability. Clinical efficacy of the whitening gels was obtained by color change in the spectrophotometer and the results showed that all the evaluated gels containing the nanoparticles (0, 1, 2 and 5% of real carbamide peroxide) were effective at bleaching after 2 h of home whitening treatment (during 30 days). After the treatment, the extracted teeth showed no in situ pulp damage by histological evaluation. The nanotechnology strategy of converting carbamide peroxide into polymeric nanoparticles revealed a new product with improved stability, a good approach for carbamide peroxide delivery.

Intestinal permeability enhancement of benzopyran HP1-loaded nanoemulsions.

The benzopyran HP1, a compound isolated from Hypericum polyanthemum, has demonstrated significant opioid-mediated antinociceptive activity after its oral administration. Despite the pharmacological potential, the poor aqueous solubility limits the oral absorption of this compound. For this reason, HP1 has been alternatively incorporated in lipid-based drug delivery systems. Given that nanoemulsions showed higher antinociceptive action than the free compound in a previous report, in this study, the main objective was to investigate the intestinal transport mechanisms of this system. The Ussing chamber model and rat jejunum were selected for this purpose. The apparent permeability coefficient of HP1 increased approximately 5.3 times after its incorporation in nanoemulsions. Considering that the absorptive transport of HP1 was significantly higher than the secretory transport, the participation of active transporters was suggested. The amount of HP1 in the acceptor chamber was reduced during permeability assays performed at 4 °C, supporting the hypothesis that active transporters are involved in the intestinal transport of this compound. The amount of free fatty acids released from nanoemulsion was approximately 60% after 90 min, demonstrating that part of this system is disassembled before absorption. Nanoemulsion constituents would be able to form new structures with biological constituents, leading to a rapid solubilization of HP1. A mucoadhesion rate of 50% was achieved by nanoemulsion after 30 min, which would also contribute to explain the higher absorption of this system. The particle size of the nanoemulsion is also compatible with endocytosis-mediated transport. Taken together, these results suggest that nanoemulsions containing HP1 could be efficiently delivered to humans considering that different absorption mechanisms are exploited.

Intestinal permeability determinants of norfloxacin in Ussing chamber model.

Recently, many efforts are taken to identify the intestinal uptake and efflux transporters since they are responsible for the absorption of many drugs as their interactions. Norfloxacin (NFX) is a fluoroquinolone that presents low solubility and low permeability, and as a consequence, low bioavailability. In this context, the aim of this study is evaluate for the first time the intestinal permeability mechanisms of NFX by Ussing chamber model. The low permeation of NFX at low temperature, where the efflux pumps are not active, reveals that NFX permeation is transporter-dependent. The permeation study at different level of intestine demonstrated that NFX passage is in the decrescent order: ileum > jejunum > duodenum > colon, probably attributed to transporters that are expressed differently along the intestinal tract. NFX intestinal flow was evaluated in the presence of many inhibitors and substrates to identify the uptake and efflux transporters implicate in NFX permeability mechanism. It could be observed that BCRP and MRPs are involved in the NFX efflux and PEPT1, PMAT and OCT in the NFX uptake transport. Furthermore, this work revealed that NFX has itself an affinity for OCTN and OATP, demonstrating that NFX could inhibit these transporters and influence the absorption of other drugs. The updated description of NFX intestinal permeability factors could contribute to the development of rational pharmaceutical formulations that could circumvent the efflux problems and consequently improve NFX biopharmaceutical properties and avoid drug-drug interactions.

Cyclodextrin based nanosponge of norfloxacin: Intestinal permeation enhancement and improved antibacterial activity.

Nanosponges are a novel class of hyperbranched cyclodextrin-based nanostructures that exhibits remarkable potential as a drug host system for the improvement in biopharmaceutical properties. This work aims the development of cyclodextrin-based nanosponge of norfloxacin to improve its physicochemical characteristics. ß-cyclodextrin was used as base and diphenyl carbonate as crosslinker agent at different proportions to produce nanosponges that were evaluated by in vitro and in vivo techniques. The proportion cyclodextrin:crosslinker 1:2 M/M was chosen due to its higher encapsulation efficiency (80%), revealing an average diameter size of 40 nm with zeta potential of -19 mV. Norfloxacin-loaded nanosponges exhibited higher passage of norfloxacin in comparison to norfloxacin drug alone by Ussing chamber method. The nanosponge formulation also revealed a mucoadhesive property that could increase norfloxacin absorption thus improving its antibiotic activity in an in vivo sepsis model. Therefore, nanosponges may be suitable carrier of norfloxacin to maximize and facilitate oral absorption.

7-nitroindazol-loaded nanoemulsions: Preparation, characterization and its improved inhibitory effect on nitric oxide synthase-1.

Nitric oxide (NO) participates in several physiological processes such as maintenance of blood pressure, host defense, neurotransmission, inhibition of platelet aggregation and learning and memory. NO is also involved in several diseases or dysfunctions in the cardiovascular, central nervous and musculoskeletal systems. NO also has been shown to be a major player in sepsis. NOS-1-derived NO has been shown to be a relevant species in physiology but also is an important element in pathology. There exist some NOS-1 inhibitors and among of them, 7-nitroindazole has been used for its in vivo selectivity. However, 7-NI has a very short half-life (∼2 h) and a poor water solubility. In this study, we describe the preparation and characterization of 7-NI-loaded nanoemulsions (NE7-NI). The chemical stability of 7-NI was greatly increased and the drug release rate could be controlled after nanoemulsification. NE7-NI reduced NO production in a long-lasting manner in vascular smooth muscle cells and skeletal muscle, without cytotoxicity. Our results evidenced that nanoemulsification approach increases the effective action time of 7-NI, rendering a suitable dosage form, which may be an interesting tool to study the role of NOS-1 in physiology and disease.

Chitosan microencapsulation of the dispersed phase of an O/W nanoemulsion to hydrochlorothiazide delivery.

In view of biopharmaceutical limitations of hydrochlorothiazide (HCTZ), Trojan-type mucoadhesive systems were proposed, aiming to improve HCTZ pharmacological properties by modulating its release. Nanoemulsions were formed spontaneously by combining medium-chain triglycerides (Lipoid® S75 and Pluronic® F68) and high encapsulation efficiency was obtained. The mucoadhesive properties were provided by chitosan and microencapsulation of nanoemulsions in spray-dryer was successfully achieved by using Aerosil® as wall material. The rapid redispersion of nanoemulsion in simulated fluids led to a fast and complete release of HCTZ in gastric medium. The pharmacodynamics of HCTZ was improved, extending the diuretic activity. Once a simple and low-energy method contributed to obtain stable mucoadhesive nanoemulsions, advantages in terms of production could also be achieved, allowing easy scaling up. This novel mucoadhesive Trojan particulate system of HCTZ showed to be a promising approach to overcome limitations in terms of absorption and consequently improve the therapeutic efficacy.

Self-Nanoemulsified Drug Delivery System of Hydrochlorothiazide for Increasing Dissolution Rate and Diuretic Activity.

Hydrochlorothiazide (HCTZ) is a class IV drug according to the Biopharmaceutical Classification System. This study aimed the development of self-nanoemulsifying drug delivery system (SNEDDS) for HCTZ as an approach to overcome the biopharmaceutical limitations. Pre-formulation screening and ternary phase diagrams were carried out to select the oil phase, the surfactant, and the co-surfactant as the amount of each constituent. The optimized formulations, with reduced amount of surfactant, and composed of medium chain triglycerides, Cremophor EL and Transcutol P did not affect the pH or show drug incompatibilities. The SNEDDS were stabilized by the nanoscale globules and high negative zeta potential. All the physicochemical characterization assays were performed in biorelevant media to better predict the in vivo performance. The enhanced dissolution rate of the SNEDDS reflected in the in vivo diuretic activity, presenting a natriuresis, kaliuresis, and chloriuresis at early stages and an increased volume of total urine compared with HCTZ alone. The designed SNEDDS produced an improvement in the pharmacodynamics due to high dissolution and probable inhibition of intestinal efflux protein by Cremophor EL. The use of SNEDDS demonstrated to be an efficient approach to modulate the absorption of HCTZ and drug therapeutics.

Inclusion complexes of hydrochlorothiazide and ß-cyclodextrin: Physicochemical characteristics, in vitro and in vivo studies.

Hydrochlorothiazide is a thiazide diuretic widely used in clinics to treat arterial hypertension. It is a class IV drug according to the Biopharmaceutical Classification System, that is, it presents low solubility and low permeability and, consequently, low absorption in the gastrointestinal tract. As a strategy to improve stability and biopharmaceutical properties of hydrochlorothiazide, the use of cyclodextrins to produce inclusion complexes, applying different methods, was investigated. In the phase solubility studies, ß-cyclodextrin was identified as the cyclodextrin which provided the most promising results in terms of the solubilization of the drug. The thermal analysis verified the interaction between hydrochlorothiazide and ß-cyclodextrin, indicating the formation of inclusion complexes, and the thermal stability varied according to the preparation technique. The physicochemical characterization showed that in the inclusion complexes obtained by co-evaporation, kneading followed by freeze-drying and kneading followed by spray-drying the hydrochlorothiazide complexation mostly occurred with different degrees of amorphization and the drug solubility was improved. These three inclusion complexes presented better in vitro characteristics and the inclusion complex obtained by kneading followed by freeze-drying increased the in vivo diuretic activity of the drug accompanied by significant effects on natriuresis, kaliuresis and chloriuresis. The inclusion complex formation was effective in improving the biopharmaceutical properties of hydrochlorothiazide and protecting the drug from hydrolysis. This paper describes an important alternative approach to the development of liquid pharmaceutical formulations to pediatric administration, a real need of the current pharmaceutical market.

Quantitative Analysis of Norfloxacin in ß-Cyclodextrin Inclusion Complexes--Development and Validation of a Stability-indicating HPLC Method.

The aim of this study was to develop and validate a simple liquid-chromatography method, with good accuracy, reproducibility and sensitivity, for the quantification of norfloxacin in ß-cyclodextrin inclusion complexes. In the method validation, the parameters evaluated were linearity, limits of detection and quantification, specificity, accuracy, precision and robustness. The stability-indication property of the method was evaluated through studies on the degradation under stress conditions. A method employing a simple mobile phase consisting of phosphate buffer (pH 3.0) and acetonitrile (86:14 v/v) was developed. Fluorescence detection was employed to minimize the influence of degradation products, due to its high sensitivity, selectivity and specificity. The method was specific, linear in the concentration range of 1 - 30 µg/mL, robust, precise and accurate. The proposed method was successfully applied in the determination of norfloxacin in inclusion complexes, thus aiding quality-control analysis in the future development of drug delivery systems.

Investigation of ß-cyclodextrin-norfloxacin inclusion complexes. Part 1. Preparation, physicochemical and microbiological characterization.

INTRODUCTION: Drugs classified as class IV by the Biopharmaceutical Classification System present significant problems in relation to effective oral administration. In the case of antibiotics, the subsequently high doses required can enhance the emergence of microorganism resistance and lead to a low rate of patient treatment adherence. OBJECTIVE: In an attempt to improve physicochemical properties and microbiological activity of norfloxacin, the aim of this study was to investigate different methods (coevaporation, kneading followed by freeze-drying or spray-drying) to obtain complexes of norfloxacin and different cyclodextrins. METHODS: Guest-host interactions were investigated through a complete physical-chemical characterization and the dissolution profile and microbiological activity were determined. RESULTS: The formation of a complex of norfloxacin and ß-cyclodextrin (1:1), obtained by kneading followed by freeze drying, led to increased drug solubility, which could maximize the oral drug absorption. CONCLUSION: Moreover, the microbiological activity was enhanced by around 23.3%, demonstrating that the complex formed could represent an efficient drug delivery system.

Investigation of ß-cyclodextrin-norfloxacin inclusion complexes. Part 2. Inclusion mode and stability studies.

INTRODUCTION: Norfloxacin (NFX) is a broad spectrum antibiotic with low solubility and permeability, which is unstable on exposure to light and humidity. OBJECTIVE: In this study, the mode of NFX inclusion into ß-cyclodextrin complexes was evaluated and a complete physical, chemical and microbiological stability study of the inclusion complexes was carried out. METHODS: Potentiometric titrations were performed to evaluate changes in the pKa of the NFX molecule due to the formation of an inclusion complex and NMR analysis demonstrated that the NFX molecule is included in the ß-cyclodextrin cavity. RESULTS: Inclusion complexes obtained by kneading followed by freeze-drying showed improved NFX stability compared with the isolated drug or the physical mixture. This method was effective in terms of protecting the drug from photodegradation and also avoiding hydrolysis. Differences between NFX and the complexes could be evidenced by thermal analysis, infrared spectroscopy and x-ray powder diffraction as well as by determining the solubility and drug content. The antimicrobial potency was also preserved on applying the promising method of kneading. CONCLUSION: The satisfactory stability indicates that the NFX/ß-cyclodextrin complexes could be useful as an alternative to the existing NFX drug formulation.

Formulation development and stability studies of norfloxacin extended-release matrix tablets.

The aim of this research was to develop a new hydrophilic matrix system containing norfloxacin (NFX). Extended-release tablets are usually intended for once-a-day administration with benefits to the patient and lower discontinuation of the therapy. Formulations were developed with hydroxypropylmethylcellulose or poly(ethylene oxide) as hydrophilic polymers, with different molecular weights (MWs) and concentrations (20 and 30%). The tablets were found to be stable (6 months at 40 ± 2°C and 75 ± 5% relative humidity), and the film-coating process is recommended to avoid NFX photodegradation. The dissolution profiles demonstrated an extended-release of NFX for all developed formulations. Dissolution curves analyzed using the Korsmeyer exponential equation showed that drug release was controlled by both drug diffusion and polymer relaxation or erosion mechanisms. A more erosion controlled system was obtained for the formulations containing lower MW and amount of polymer. With the increase in both MW and amount of polymer in the formulation, the gel layer became stronger, and the dissolution was more drug-diffusion dependent. Formulations containing intermediate MW polymers or high concentration (30%) of low MW polymers demonstrated a combination of extended and complete in vitro drug release. This way, these formulations could provide an increased bioavailability in vivo.

Physicochemical and microbiological stability studies of extemporaneous antihypertensive pediatric suspensions for hospital use.

Extemporaneous suspensions of the antihypertensive agents furosemide, spironolactone and hydrochlorothiazide for pediatric use have been prepared at University Hospital (Federal University of Santa Catarina - Brazil). The aim of this work was to investigate the physicochemical and microbiological stability of these suspensions over the estimated shelf-life period of seven days and, if necessary, to optimize the formulations by improving the chemical stability. The pediatric suspensions were prepared using drug raw material and were stored at 25 ± 2°C and 5 ± 3°C. Chemical stability was evaluated by HPLC assay of the suspensions for drug content. Physical stability was evaluated by sedimentation volume, redispersibility, particle size, and zeta potential. Viable bacterial and fungal contaminations were assessed according to the official compendium. Furosemide and spironolactone suspensions as prepared herein can be stored for 7 days. However, the hydrochlorothiazide suspension formulation at pH 6.5 demonstrated poor chemical stability and was optimized by adjusting the pH to 3.3 where the drug exhibited acceptable stability. The optimized formulation demonstrated to be stable over the required period of 7 days.