ABSTRACT
A plastic injection waste known as "purge" cannot be reintegrated into the recycling chain due to its shape, size, and composition. Grinding these cannot be carried out with traditional mills due to significant variations in size and shape. This work proposes a process and the design of a device that operates with solar energy to cut the purges without exceeding the degradation temperature. The size reduction allows reprocessing, revalorization, and handling. The purges are mixtures of processed polymers, so their characterization information is unavailable. Some characterizations were conducted before the design of the process and after the cut of the purges. Some of the most representative purges in a recycling company were evaluated. The flame test determines that all material mixtures retain thermoplasticity. The hardness (Shore D) presented changes in four of the purges being assessed, with results in a range of 59-71 before softening and 60-68 after softening. Young's modulus was analyzed by the impulse excitation technique (IET), which was 2.38-3.95 GPa before softening and 1.7-4.28 after softening. The feasibility of cutting purges at their softening temperature was evaluated. This was achieved in all the purges evaluated at 250-280 °C. FTIR allowed for corroboration of no significant change in the purges after softening. The five types of purges evaluated were polypropylene-ABS, polycarbonate-ABS-polypropylene, yellow nylon 66, acetal, and black nylon 66 with fillers, and all were easily cut at their softening temperature, allowing their manipulation in subsequent process steps.
ABSTRACT
Traditional medicine in Latin America and mainly in Mexico represents an essential alternative for treating different diseases. The use of plants as medicine is the product of a rich cultural tradition of the indigenous peoples, in which a great variety of species are used for the treatment of gastrointestinal, respiratory, and mental diseases and some other sicknesses; the therapeutic efficacy that they possess is due to the properties that derive from the active ingredients of plants principally antioxidants, such as phenolic compounds, flavonoids, terpenes, and tannins. An antioxidant is a substance that, at low concentrations, delays or prevents substrate oxidation through the exchange of electrons. Different methods are used to determine the antioxidant activity and the most commonly used are described in the review. Cancer is a disease in which some cells multiply uncontrollably and spread to other parts of the body, a process known as metastasis. These cells can lead to the formation of tumors, which are lumps of tissue that can be cancerous (malignant) or noncancerous (benign). Generally, the treatment of this disease consists of surgery, radiotherapy, or chemotherapy, which have side effects that decrease the quality of life of patients, so new treatments, focusing on natural resources such as plants, can be developed. This review aims to gather scientific evidence on the antioxidant compounds present in plants used in traditional Mexican medicine, specifically as antitumor treatment in the most common cancer types worldwide (e.g., breast, liver, and colorectal cancer).
ABSTRACT
In order to study in situ the growing process of porous materials, a new electrochemical differential photoacoustic cell (DPC) was developed. This system allows to obtain the thermal signals coming from the growing process of the pores without the external noise component. The DPC is a good system to growth porous silicon and study their growing process with reproducibility. The porous silicon samples were obtained by using electrochemical etching of (100) n-type silicon wafers with different nominal resistivity values in the range of 1-25 Omega cm. The samples were formed in a solution of hydrofluoric acid and ethanol having a composition ratio of 1:1 in volume with etching voltage of 10 V and an etching time of 2 min using back illumination provided by a laser beam with a wavelength of 808 nm. The porous samples were characterized by means of Raman microscopy, x-ray diffraction, and scanning electron microscopy. The crystallite sizes of the samples were obtained through the analysis of the micro-Raman spectra using a phonon confinement model, and the analysis of the x-ray diffractograms.
ABSTRACT
La espectroscopia mediante celda fotoacústica diferencial (CFD) tiene la capacidad de medir in situ el desarrollo de diversos procesos dinámicos, entre otros la difusión de agua a través de una membrana. Mediante esta técnicase realizó el estudio de permeación de agua en huesos de rata Wistar sanos y descalcificados. Los huesos descalcificados fueron tratados mediante estimulación electromagnética a fin de evaluar la actividad celular en el hueso y, en su caso, detener la descalcificación del mismo. En este trabajo fue posible determinar la viabilidad de la CFD para la evaluación de densidad ósea indirectamente, siendo posible efectuar la evaluación in situ de permeación de agua, así como la cantidad de agua retenida en la estructura ósea al finalizar las pruebas en CFD.
