ABSTRACT
The objective of this study was to contribute to genetic improvement for carcass quality in Nellore cattle by estimating genetic parameters for carcass characteristics measured by traditional and novel ultrasound adjusted for body weight. Records of 19,910 Nellore breed animals born between 2001 and 2015 as part of a genetic improvement program were evaluated for this purpose. The (co)variance components and genetic parameters for yearling weight (YW), slaughter conformation at yearling age (SCY), ribeye area (REA), REA adjusted for 100 kg of body weight (REA100), REA adjusted for 450 kg of body weight (REA450), subcutaneous fat thickness over the loin (SFTL) and the rump (SFTR), intramuscular fat (IF), and height × width ratio of the sirloin steak (RATIO) were estimated using the restricted maximum likelihood (REML) method and the three-trait animal model. The estimated heritability values were 0.39 (YW), 0.33 (SCY), 0.31 (REA), 0.42 (REA100), 0.38 (REA450), 0.31 (RATIO), 0.17 (SFTL), 0.27 (SFTR), and 0.41 (MAR). The genetic correlations between REA and YW (0.43) and SCY and YW (0.78), respectively, suggested that selecting for REA or SCY could result in an increase in body weight. Because of its moderate and negative correlation with YW, REA100 was ineffective as a muscling indicator (- 0.38). The indicators REA450 and RATIO had a - 0.12 and 0.11 low correlation with YW, respectively. Thus, it is concluded that REA450 and RATIO were the best indicators of muscling, with heritability of medium magnitude, making the selection viable, as well as having a low correlation with body weight.
Subject(s)
Models, Genetic , Muscles , Animals , Body Weight , Cattle/genetics , Phenotype , Ultrasonography/veterinaryABSTRACT
Growing concerns regarding sustainability in agriculture include the availability of drinking water, which is putting pressure on livestock production, especially the beef sector, for more efficient practices. Thus, genetic parameters were estimated for traits related to water intake and water use efficiency in Senepol cattle. Senepol females (nâ¯=â¯925) and males (nâ¯=â¯191) were evaluated in performance tests carried out from 2014 to 2019. Daily dry matter intake (DMI) and water intake (WI) were recorded by electronic feed and water bunks (Intergado Ltd.). Other traits assessed included average daily gain (ADG); mid-test metabolic BW (BW0.75); residual water intake based on ADG (RWIADG), estimated as the residual of the linear regression equation of WI on ADG and BW0.75; residual water intake based on DMI (RWIDMI), estimated as the residual of the linear regression equation of WI on DMI and BW0.75 (RWIDMI); water conversion ratio (= WI/ADG); gross water efficiency (GWEâ¯=â¯ADG/WI); residual feed intake estimated as the residual of the linear regression equation of DMI on ADG and BW0.75 (RFI); feed conversion ratio (= DMI/ADG) and gross feed efficiency. Genetic (co)variances were estimated with bivariate analyses. The heritabilities for WI, RWIADG and RWIDMI were 0.38, 0.36 and 0.33, respectively. Water conversion ratio, RWIADG and RWIDMI showed positive genetic and phenotypic correlations with WI, whereas GWE was negatively correlated with WI, suggesting that traits related to water use efficiency may be useful to identify cattle with reduced WI. Water intake showed positive genetic (râ¯=â¯0.79) and phenotypic (râ¯=â¯0.60) correlations with DMI, suggesting the use of WI to estimate DMI in future studies. Both RWIADG and RWIDMI were genetically correlated with RFI (0.67 and 0.57, respectively) and ADG (0.49 and 0.44, respectively), showing that RWI is positively associated with feed efficiency, but has an antagonistic relationship with growth. This antagonism, however, may be managed using selection indexes. Genetic improvement of water use efficiency in Senepol cattle is possible through selection and may reduce the water requirements of beef production systems.
Subject(s)
Drinking , Eating , Animal Feed , Animals , Cattle/genetics , Female , Male , Phenotype , Selection, Genetic , WaterABSTRACT
Improving feed efficiency is a key breeding goal in the beef cattle industry. In this study, we estimated the genetic parameters for feed efficiency and carcass traits in Senepol cattle raised in tropical regions. Various indicators of feed efficiency [gain to feed ratio (G:F), feed conversion ratio (FCR), residual weight gain (RG), residual intake and body weight gain (RIG), and residual feed intake (RFI)] as well as growth [final BW, average daily gain (ADG), and DM intake (DMI)], and carcass [rib-eye area (REA), backfat thickness (BF), intramuscular fat score, and carcass conformation score] traits were included in the study. After data editing, records from 1â¯393 heifers obtained between 2009 and 2018 were used for the analyses. We fitted an animal model that included contemporary group (animals from the same farm that were evaluated in the same test season) as the fixed effect, and a linear effect of animal age at the beginning of the test as a covariate; in addition to random direct additive genetic and residual effects. The (co)variance components were estimated by Bayesian inference in uni- and bivariate analyses. Our results showed that feed efficiency indicators derived from residual variables such as RG, RIG, and RFI can be improved through genetic selection (h2 = 0.14 ± 0.06, 0.13 ± 0.06, and 0.20 ± 0.08, respectively). Variables calculated as ratios such as G:F and FCR were more influenced by environmental factors (h2 = 0.08 ± 0.05 and 0.09 ± 0.05), and were, therefore, less suitable for use in breeding programs. The traits with the greatest and impact on genetic progress in feed efficiency were ADG, REA, and BF. The traits with the greatest and least impact on growth and carcass traits were RG and RFI, respectively. Selection for feed efficiency will result in distinct overall effects on the growth and carcass traits of Senepol heifers. Direct selection for lower RFI may reduce DMI and increase carcass fatness at the finishing stage, but it might also result in reduced growth and muscle deposition. Residual BW gain is associated with the highest weight gain and zero impact on REA and BF, however, it is linked to higher feed consumption. Thus, the most suitable feed efficiency indicator was RIG, as it promoted the greatest decrease in feed intake concomitant with faster growth, with a similar impact on carcass traits when compared to the other feed efficiency indicators.
Subject(s)
Eating , Weight Gain , Animal Feed , Animals , Bayes Theorem , Cattle/genetics , Female , PhenotypeABSTRACT
Crossbreeding represents an important technique to improve growth, beef quality and adaptability in beef production systems in tropical countries. The aim of this study was to evaluate sire and dam breed effects on performance and carcass traits of crossbred cattle produced in a tropical environment. Heifers and steers were evaluated during the pre-weaning, the post-weaning (n = 173) and the finishing phase (n = 123). Animals were produced by mating Nellore (N_N), Angus × Nellore (A_N) and Caracu × Nellore (C_N) dams with Braford, Charbray and Caracu sires. After weaning, animals were raised grazing on Marandu grass for 12 months; thereafter they were housed in individual pens and finished in a feedlot, receiving a total mixed ration. Ultrasound carcass evaluations were performed to determine ribeye area (R_A), backfat thickness (B_T) and rump fat thickness (R_T). A_N progeny were heavier at birth than N_N (P < 0.05), and Braford progeny had greater birth BW than Caracu (P < 0.05). Greater weaning BW was observed in the A_N and C_N offspring compared to N_N (P < 0.01). Greater average daily gain during the post-weaning period was verified in the N_N progeny compared to C_N (P < 0.05). No dam or sire breed effects were observed for BW at the end of the post-weaning period (P > 0.05). Progeny of N_N cows had greater B_T (P < 0.05) and R_T (P < 0.01) at the end of the post-weaning period in relation to C_N. Greater R_A was observed in the Caracu progeny than in the Braford (P < 0.05), which showed greater R_T than the Charbray progeny at the end of the post-weaning period (P < 0.05). No dam or sire breed effects were verified for final BW at the feedlot or for feed efficiency traits (P > 0.05). A_N progeny were superior in final B_T compared to C_N (P < 0.01), and Braford progeny had greater R_T at the end of finishing than Charbray (P = 0.05). The use of crossbred dams allows an increase in productivity until weaning, but this is not maintained in the post-weaning and finishing periods. The use of Braford sires produces similar growth performance in the different stages of the production system to those seen with Charbray and Caracu sires but generates animals with higher fat thickness at the end of finishing, which may improve carcass quality and commercial value.
Subject(s)
Cattle/physiology , Hybridization, Genetic , Red Meat/standards , Animals , Body Composition , Breeding , Cattle/genetics , Cattle/growth & development , Female , Male , Parturition , Phenotype , Pregnancy , Ultrasonography/veterinary , WeaningABSTRACT
Longer-lived cows tend to be more profitable and the stayability trait is a selection criterion correlated to longevity. An alternative to the traditional approach to evaluate stayability is its definition based on consecutive calvings, whose main advantage is the more accurate evaluation of young bulls. However, no study using this alternative approach has been conducted for Zebu breeds. Therefore, the objective of this study was to compare linear random regression models to fit stayability to consecutive calvings of Guzerá, Nelore and Tabapuã cows and to estimate genetic parameters for this trait in the respective breeds. Data up to the eighth calving were used. The models included the fixed effects of age at first calving and year-season of birth of the cow and the random effects of contemporary group, additive genetic, permanent environmental and residual. Random regressions were modeled by orthogonal Legendre polynomials of order 1 to 4 (2 to 5 coefficients) for contemporary group, additive genetic and permanent environmental effects. Using Deviance Information Criterion as the selection criterion, the model with 4 regression coefficients for each effect was the most adequate for the Nelore and Tabapuã breeds and the model with 5 coefficients is recommended for the Guzerá breed. For Guzerá, heritabilities ranged from 0.05 to 0.08, showing a quadratic trend with a peak between the fourth and sixth calving. For the Nelore and Tabapuã breeds, the estimates ranged from 0.03 to 0.07 and from 0.03 to 0.08, respectively, and increased with increasing calving number. The additive genetic correlations exhibited a similar trend among breeds and were higher for stayability between closer calvings. Even between more distant calvings (second v. eighth), stayability showed a moderate to high genetic correlation, which was 0.77, 0.57 and 0.79 for the Guzerá, Nelore and Tabapuã breeds, respectively. For Guzerá, when the models with 4 or 5 regression coefficients were compared, the rank correlations between predicted breeding values for the intercept were always higher than 0.99, indicating the possibility of practical application of the least parameterized model. In conclusion, the model with 4 random regression coefficients is recommended for the genetic evaluation of stayability to consecutive calvings in Zebu cattle.
Subject(s)
Breeding , Cattle , Animals , Cattle/genetics , Cattle/physiology , Female , Linear Models , Models, Genetic , Parturition , Phenotype , PregnancyABSTRACT
Com o objetivo de avaliar matrizes da raça Nelore (NE) e cruzadas 1/2 Angus + 1/2 Nelore (AN), 1/2 Caracu + 1/2 Nelore (CN) e 1/2 Senepol + 1/2 Caracu (SC) quanto à precocidade sexual em sistemas de recria a pasto, eficiência reprodutiva e desempenho produtivo das matrizes em cada grupo genético (GG), matrizes desses grupos foram produzidas por três safras. Foram avaliadas 40 matrizes AN, 37 CN, 51 NE e 43 SC. Para prenhez precoce, matrizes AN apresentaram taxa de prenhez de 92,2% contra 29,1% para CN, 22,6% para SC e 1,1% para NE. Na prenhez convencional, matrizes AN obtiveram 99,4%, 98,8% para CN, 84,4% para SC e 80,0% para NE. A reconcepção das matrizes AN foi 86,3%, 75,1% de CN, 49,6% de NE e 43,6% de SC. Matrizes AN tiveram menor média de idade ao primeiro parto em meses, 26,36±0,79, contra 31,33±0,86 para CN, 33,51±0,98 para SC e 38,08±0,74 para NE. Para peso ao desmame, crias three-cross das AN pesaram mais que as F1 das NE, por volta de 19%. Para relação de peso ao desmame, não houve diferenças estatísticas entre GG. Matrizes AN foram superiores às demais nos aspectos reprodutivos e produtivos, seguidas das matrizes CN.(AU)
With the aim of evaluating Nelore (NE), 1/2 Angus + 1/2 Nelore (AN), 1/2 Caracu + 1/2 Nelore (CN), and 1/2 Senepol + 1/2 Caracu (SC) females for sexual precocity on pasture backgrounding, reproductive efficiency and productive performance of cows and their calves of each genetic group (GG), animals of these groups were produced for three years. A total of 40 AN, 37 CN, 51 NE and 43 SC cows were evaluated. For early heifer pregnancy, AN cows had pregnancy rate of 92.2% compared to 29.1% for CN, 22.6% for SC and 1.1% for NE. For conventional heifer pregnancy AN obtained 99.4%, CN with 98.8%, SC with 84.4% and NE with 80.0%. The first reconception of AN cows were 86.3%, 75.1% for CN, 49.6% for NE and 43.6% for SC. AN cows also had lower age at first calving in months, 26.36±0.79, compared to 31.33±0.86 for CN, 33.51±0.98 for SC and 38.08±0.74 for NE. For weaning weigth the three-cross from AN were heavier than the F1s from NE, by a margin of 19%. For calf:cow weight ratio there was no statistical difference among GG. AN cows were superior to the others in both productive and reproductive aspects, followed by the CN cows.(AU)
Subject(s)
Animals , Female , Cattle , Birth Rate , Fertility , Reproduction , Sexual Maturation , WeaningABSTRACT
The productivity of herds may be negatively affected by inbreeding depression, and it is important to know how intense is this effect on the livestock performance. We performed a comprehensive analysis involving five Zebu breeds reared in Brazil to estimate inbreeding depression in productive and reproductive traits. Inbreeding depression was estimated for 13 traits by including the individual inbreeding rate as a linear covariate in the standard genetic evaluation models. For all breeds and for almost all traits (no effect was observed on gestation length), the performance of the animals was compromised by an increase in inbreeding. The average inbreeding depression was -0.222% and -0.859% per 1% of inbreeding for linear regression coefficients scaled on the percentage of mean (ßm ) and standard deviation (ßσ ), respectively. The means for ßm (and ßσ ) were -0.269% (-1.202%) for weight/growth traits and -0.174% (-0.546%) for reproductive traits. Hence, inbreeding depression is more pronounced in weight/growth traits than in reproductive traits. These findings highlight the need for the management of inbreeding in the respective breeding programmes of the breeds studied here.
Subject(s)
Cattle/classification , Cattle/genetics , Inbreeding , Meat , Milk , Animals , Brazil , Cattle/physiologyABSTRACT
The objective of this study was to compare the results of genetic evaluations by using different milk control intervals to reduce the cost of milk yield controls without harming the quality of genetic evaluation of the animals. We analyzed test day milk yield data from the Goat Sector of Universidade Federal de Viçosa. After editing and checking for errors in the database, there were 20,710 records of test day milk yield for the 667 first lactations of Alpine goats, constituting the complete file, with 7-day control intervals. Information on specific weeks was excluded from the complete file to create files with data on control intervals of 15, 21, and 28 days. The RENPED program was used to recode the pedigree and data files and correct pedigree errors; the WOMBAT program was used for genetic evaluations of the 4 files. The following comparison criteria of analysis results were used: logarithm of the function of the restricted maximum likelihood, length of the analyses in seconds, Pearson and Spearman correlations, and common elimination percentage among the areas below the regression curve of the genetic values of the animals. Overall, it is recommended that a 7-day interval among milk controls should be used in breeding programs and farms with a high technical level. Intervals of 14 and 21 days can achieve satisfactory results combined with a lower data collection cost for farms with an average-to-low technical level, less effective size, and genetic variability that depend on external genetic material for genetic improvement.
Subject(s)
Goats/genetics , Lactation/genetics , Milk/standards , Animals , Breeding , Data Interpretation, Statistical , Female , Goats/physiology , Milk/chemistry , Pedigree , Quality Control , Time FactorsABSTRACT
Data from 1279 lactations of 783 Alpine and Saanen goats of the herd of our university in Minas Gerais, Brazil, were used to study environmental effects on and to estimate genetic parameters for milk production until 270 days of lactation (MP270) and for production and percentages of fat (PFAT and %FAT), protein (PPROT and %PROT), lactose (PLACT and %LACT), and total dry extract (PEXTR and %EXTR). Environmental effects were estimated by a statistical model that included contemporary group effect, type of kidding, genetic grouping, and kidding order. A multi-trait animal model with animal and permanent environment random effects was used to estimate genetic parameters and the significant environmental effects (fixed). Contemporary group influenced all traits; genetic grouping did not influence %LACT; type of kidding did not influence PFAT, %PROT or %LACT, and kidding order did not influence %FAT or %EXTR. Heritability and repeatability estimates were, respectively, 0.19 and 0.37 (MP270); 0.10 and 0.20 (PFAT); 0.12 and 0.24 (PPROT); 0.15 and 0.27 (PLACT); 0.13 and 0.24 (PEXTR); 0.21 and 0.34 (%FAT); 0.39 and 0.44 (%PROT); 0.17 and 0.29 (%LACT); 0.31 and 0.47 (%EXTR). Estimates of genetic correlations among MP270 and production of milk constituents were positive and high, but correlations between MP270 and %FAT, MP270 and %PROT, MP270 and %ESTR were moderate and negative. These heritability estimates show that satisfactory genetic gains can be obtained by selection, especially for milk constituents.
Subject(s)
Ecosystem , Environment , Goats/genetics , Lactation/genetics , Milk/metabolism , Analysis of Variance , Animals , Female , Inheritance Patterns/genetics , Quantitative Trait, Heritable , Reproducibility of ResultsABSTRACT
Avaliou-se o efeito da autocorrelação residual sobre a qualidade das estimativas dos parâmetros genéticos para produção total de leite (PL) e para os coeficientes a, b e c do modelo de Wood e, consequentemente, sobre a classificação dos animais para estas características. O modelo de Wood foi ajustado às lactações de cabras considerando-se três situações de estrutura residual: (EI) - erros independentes, (AR1) - erros autorregressivos de primeira ordem e (EI - AR1) - erros AR1 somente para as lactações que apresentaram autocorrelação residual significativa e EI para as demais. As estimativas dos coeficientes a, b e c e PL foram utilizadas como variáveis dependentes em um modelo animal multicaracterístico, o qual incluiu os efeitos aleatórios de animal e de ambiente permanente e os efeitos fixos de grupo contemporâneo, número de crias por parto, grupos genéticos e ordem de parto, além das covariáveis duração da lactação e a idade da cabra ao parto. As diferentes estruturas residuais afetaram as estimativas dos parâmetros genéticos e as classificações dos animais para as características estudadas. Portanto, a seleção dos animais pode ser modificada pela presença da autocorrelação residual, sendo a estrutura EI-AR1 uma alternativa para contornar este problema.
The objective of this study was to evaluate the residual autocorrelation effect on the estimates of genetic parameters for total milk yield (MY) and the coefficients a, b and c of Wood's model and, consequently, the animal's classification for these traits. Wood's model was fitted to the lactation of goats considering three cases of residual structure: (IE) - independent errors, (AR1) - first order autoregressive errors, and (IE - AR1) - AR1 errors only for lactations that had significant residual autocorrelation and IE for others. Estimates of the coefficients a, b and c and PL were used as dependent variables in a multivariate animal model, which included the random effects of animal and permanent environmental and fixed effects of contemporary group, number of foals per birth, genetic groups and order of calving, besides the covariates of lactation length (linear) and age at parturition (linear and quadratic). The different residual structures affected the estimates of genetic parameters and the classification of animals for the traits studied. Therefore, the selection of animals can be modified with the presence of residual autocorrelation and the structure IE-AR1 is presented as an alternative to solve this problem.
Subject(s)
Animals , Goats , LactationABSTRACT
Avaliou-se o descarte de variáveis de produção, em análises de componentes principais, de três linhagens de matrizes de corte do Programa de Melhoramento Genético da Universidade Federal de Viçosa, utilizando informações de 270 aves, sendo 90 de cada linhagem. As características analisadas foram dias para postura do primeiro ovo (DPPO), taxa de postura da 22ª a 56ª semana (TP), peso médio individual na 32ª (PMI1), na 40ª (PMI2), na 48ª (PMI3), na 56ª (PMI4) e na 64ª semana (PMI5) e peso médio do ovo, obtido pela média da pesagem de três ovos na 32ª (PMO1), na 40ª (PMO2), na 48ª (PMO3), na 56ª (PMO4) e na 64ª semana (PMO5). Dos 12 componentes principais, sete apresentaram variância menor do que 0,7 (autovalor menor do que 0,7), sugerindo-se sete variáveis para descarte. As variáveis descartadas foram aquelas que apresentaram maiores coeficientes, em valor absoluto, a partir do último componente principal. Observou-se correlação linear simples e significativa entre as variáveis descartadas e as não descartadas, que indica redundância de variáveis, razão do descarte. Recomendam-se as variáveis: DPPO, TP, PM14, PMO1 e PMO4 para o estudo de características da produção de matrizes de frango de corte por meio da análise de componentes principais.
Records of 270 meat-type chickens from three lines, 90 of each one, were used to discard variables in a principal component analysis. Data were obtained from meat-type chicken lines of the genetic breeding program of the Universidade Federal de Viçosa. The following traits were evaluated: days at first egg (DFE), egg production rate (EPR) from 22nd to 56th week, body weights at 32nd (BW1), 40th (BW2), 48th (BW3), 56th (BW4), and 64th weeks of age (BW5), and average of three egg weights, at 32nd (EW1), 40th (EW2), 48th (EW3), 56th (EW4) and at 64th weeks (EW5). From the 12 principal components, seven showed variance lower than 0,7 (eigenvalue lower than 0,7), suggesting seven variables to be discarded. Variables which showed the highest coefficients, in absolute value, in the last principal component were discarded. Highly correlated variables with the smaller principal components variance explain a small part of the whole variation. In addition, discarded variables in function of the significant simple linear correlation with the nondiscorded variable, were considered redundants. The variables DFE, EPR, BW4, EW1, and EW4 are recommended for principal component analysis of broiler matrix.