A MELET- and IFE-based UV-visible luminescent ratiometric probe for quantization of mercury(II) and nitrofurantoin in environmental sewage.

A novel fluorimetric ratiometric probe of green and eco-friendily nitrogen-enriched, oxygen-doped carbon nanodots (Cnanodots) was prepared for the quantitative analysis of mercury(II) (HgII) and nitrofurantoin (Nit) in the environmental sewage. The Cnanodots exhibits dual-emission peaks respectively at 345 and 445 nm under 285 nm excitation, with excitation-independent properties. Unexpectedly, this Cnanodots displays two obvious ratiometric responses to HgII and Nit through decreasing the signal at 345 nm and remaining invariable at 445 nm. Experimental results confirm that the highly sensitive analysis of HgII and Nit are achieved respectively based on matching energy-level electron transfer and inner filter effect mechanisms. The fluorescence (FL) ratiometric intensity of [FL345nm/FL445nm] expresses a good linear relationship with the concentration of HgII in the scope of 0.01-20 µM, while the logarithm of [Log(FL0345nm-FL345nm)] on the quenching degree of the probe by Nit also shows a good linear correlation within the range of 0.01-100 µM. The detection limits were calculated to be 4.14 nM for HgII, and 7.84 nM for Nit. Moreover, recovery experiments of Cnanodots for HgII and Nit sensing in real sewage samples obtained satisfactory results, comfirming the feasibility of practical application.

Atrimonas thermophila gen. nov., sp. nov., a novel anaerobic thermophilic bacterium of the phylum Atribacterota isolated from deep subsurface gas field and proposal of Atrimonadaceae fam. nov. within the class Atribacteria in the phylum Atribacterota.

A novel anaerobic, thermophilic bacterium of the class Atribacteria, strain M15T, was isolated from a high-temperature gas reservoir, Japan. Cells of strain M15T were gram-negative, short oval-shaped, and lacked flagella. Growth occurred at 45-75 °C (optimum 70-75 °C) and pH 6.5-8.5 (optimum pH 7.5-8.0) and was fast under optimal conditions (doubling time 11.4 h). Yeast extract was required for growth. Fermentative growth with glucose, arabinose, xylose, and cellobiose was observed. The major fermentative end products of glucose were acetate and hydrogen. The major cellular fatty acids were C16:0, iso-C15:0, and C18:0. The genomic G + C content was 46.0 mol%. Fluorescence and electron microscopy observations revealed the intracellular localization of genomic DNA surrounded by a membrane in the cells of strain M15T as reported in a sole validly described species of the class Atribacteria in the phylum Atribacterota, Atribacter laminatus strain RT761T, suggesting that the unique morphological traits are widely shared in this class. Phylogenetic analyses indicated that strain M15T belongs to a distinct family-level lineage in the class Atribacteria and shows low similarities to Atribacter laminatus strain RT761T (16S rRNA gene sequence identity of 90.1 %, average nucleotide identity [ANI] of 66.1 %, average amino acid identity [AAI] of 55.8 %). Phenotypic traits of strain M15T (thermophilic, fast-growing, relatively high G + C content, etc.) were clearly distinct from A. laminatus. Based on these phenotypic and genomic properties, we propose a novel genus and species, Atrimonas thermophila gen. nov., sp. nov. for strain M15T (=JCM39389T, =KCTC25731T) representing a novel family Atrimonadaceae fam., nov. in the class Atribacteria.

Research progress in stem cell therapy for Wilson disease.

Wilson disease (WD), also known as hepatolenticular degeneration, is an autosomal recessive disorder characterized by disorganized copper metabolism caused by mutations in the ATP7B gene. Currently, the main treatment options for WD involve medications such as d-penicillamine, trientine hydrochloride, zinc acetate, and liver transplantation. However, there are challenges that encompass issues of poor compliance, adverse effects, and limited availability of liver sources that persist. Stem cell therapy for WD is currently a promising area of research. Due to the advancement in stem cell directed differentiation technology in vitro and the availability of sufficient stem cell donors, it is expected to be a potential treatment option for the permanent correction of abnormal copper metabolism. This article discusses the research progress of stem cell therapy for WD from various sources, as well as the challenges and future prospects of the clinical application of stem cell therapy for WD.

Integrated Physiologic and Proteomic Analyses Reveal the Molecular Mechanism of Navicula sp. in Response to Ultraviolet Irradiation Stress.

With the continuous development of space station construction, space ecosystem research has attracted increasing attention. However, the complicated responses of different candidate plants and algae to radiation stress remain unclear. The present study, using integrated physiologic and proteomic analyses, was carried out to reveal the molecular mechanism of Navicula sp. in response to ultraviolet (UV) irradiation stress. Under 12~24 h of high-dose UV irradiation conditions, the contents of chlorophyll and soluble proteins in Navicula sp. cells were significantly higher than those in the control and 4~8 h of low-dose UV irradiation groups. The activity of catalase (CAT) increased with the extension of irradiation time, and the activity of superoxide dismutase (SOD) decreased first and then increased. Furthermore, differential volcano plot analysis of the proteomic data of Navicula sp. samples found only one protein with a significant difference. Differential protein GO analysis unveiled that UV irradiation can activate the antioxidant system of Navicula sp. and further impact photosynthesis by affecting the photoreaction and chlorophyll synthesis of Navicula sp. The most significant differences in KEGG pathway analysis were also associated with photosynthesis. The above results indicate that Navicula sp. has good UV radiation resistance ability by regulating its photosynthetic pigment content, photosynthetic activity, and antioxidant system, making it a potential candidate for the future development of space ecosystems.

Electrochemical biosensors for pathogenic microorganisms detection based on recognition elements.

The worldwide spread of pathogenic microorganisms poses a significant risk to human health. Electrochemical biosensors have emerged as dependable analytical tools for the point-of-care detection of pathogens and can effectively compensate for the limitations of conventional techniques. Real-time analysis, high throughput, portability, and rapidity make them pioneering tools for on-site detection of pathogens. Herein, this work comprehensively reviews the recent advances in electrochemical biosensors for pathogen detection, focusing on those based on the classification of recognition elements, and summarizes their principles, current challenges, and prospects. This review was conducted by a systematic search of PubMed and Web of Science databases to obtain relevant literature and construct a basic framework. A total of 171 publications were included after online screening and data extraction to obtain information of the research advances in electrochemical biosensors for pathogen detection. According to the findings, the research of electrochemical biosensors in pathogen detection has been increasing yearly in the past 3 years, which has a broad development prospect, but most of the biosensors have performance or economic limitations and are still in the primary stage. Therefore, significant research and funding are required to fuel the rapid development of electrochemical biosensors. The overview comprehensively evaluates the recent advances in different types of electrochemical biosensors utilized in pathogen detection, with a view to providing insights into future research directions in biosensors.

Gold-copper-doped lanthanide luminescent metal-organic backbone induced self-enhanced molecularly imprinted ECL sensors for ultra-sensitive detection of chlorpyrifos.

Herein, a self-enhanced molecularly imprinted polymer luminescence (MIP-ECL) sensing platform based on gold-copper doped Tb-MOFs (Au@Cu:Tb-MOFs) was constructed for ultra-sensitive detection of chlorpyrifos (CPF). In this work, Au@Cu:Tb-MOFs as co-reaction promoters greatly improve the ECL emission signal, while Au@Cu:Tb-MOFs were used as cathode emitters. And chlorpyrifos and 4,7-bis(thiophene-2-yl)benzo [c][1,2,5] thiadiazole were electropolymerized on electrode surface to form MIP, where this films with thiophene derivatives could greatly improve ECL signal. Notably, the introduction of MIP as recognition elements enabled specific identification of target analytes, in which molecular docking technique validated target analyte and functional monomers are tightly bound through Pi-alkyl interaction. As the concentration of CPF increases, the ECL signal gradually decreases, showing a good linear relationship in the range of 0.1-106 pg/mL with a low detection limit (LOD) of 0.029 pg/mL. Moreover, actual sample testing experiment of this method displayed a special correlation in organophosphorus detection and development potential in actual sample analysis.

Portable glucose sensing analysis based on laser-induced graphene composite electrode.

In this work, a portable electrochemical glucose sensor was studied based on a laser-induced graphene (LIG) composite electrode. A flexible graphene electrode was prepared using LIG technology. Poly(3,4-ethylene dioxythiophene) (PEDOT) and gold nanoparticles (Au NPs) were deposited on the electrode surface by potentiostatic deposition to obtain a composite electrode with good conductivity and stability. Glucose oxidase (GOx) was then immobilized using glutaraldehyde (GA) to create an LIG/PEDOT/Au/GOx micro-sensing interface. The concentration of glucose solution is directly related to the current value by chronoamperometry. Results show that the sensor based on the LIG/PEDOT/Au/GOx flexible electrode can detect glucose solutions within a concentration range of 0.5 × 10-5 to 2.5 × 10-3 mol L-1. The modified LIG electrode provides the resulting glucose sensor with an excellent sensitivity of 341.67 µA mM-1 cm-2 and an ultra-low limit of detection (S/N = 3) of 0.2 × 10-5 mol L-1. The prepared sensor exhibits high sensitivity, stability, and selectivity, making it suitable for analyzing biological fluid samples. The composite electrode is user-friendly, and can be built into a portable biosensor device through smartphone detection. Thus, the developed sensor has the potential to be applied in point-of-care platforms such as environmental monitoring, public health, and food safety.

Photoelectrochemical sensor for the detection of Escherichia coli O157:H7 based on TPA-NO2 and dual-functional polythiophene films.

The detection of Escherichia coli (E. coli) is of great significance for the environment and human health. Herein, a photoelectrochemical (PEC) detection strategy based on molecularly imprinted polymers (MIPs) was proposed for the sensitive detection of E. coli. 4,4',4″-Trinitrotriphenylamine (TPA-NO2) was prepared using a simple nitration reaction. Subsequently, MIP films were polymerized on the surface of TPA-NO2 using 1,3-dihydrothieno[3,2-d]pyrimidine-2,4-dione as the functional monomer with the dual functions of specific recognition and sensitization. The linear range was 10-108 CFU/mL and the limit of detection was 10 CFU/mL. It showed favorable recoveries in real sample tests of milk, orange juice and tomato. Additionally, the ability of functional monomers to bind excellently with E. coli was verified using molecular docking techniques. This research provided broader possibilities for constructing MIPs-PEC sensors and analyzing the interaction mechanism between E. coli and functional monomers.