ABSTRACT
In this research, a brick kiln integrated with pollutant emission control technology was designed and applied in order to produce charcoal from Eucalyptus Globules wood. The batch operation carbonization of wood biomass was undertaken in a 1.25 m3 volume brick kiln. A wet-packed scrubber was designed and constructed by filling gravels in a depth of 40 cm with aggregate sizes of 48-60 mm, 27-33 mm and 16-20 mm from the bottom to the top respectively aiming to treat emission from the charcoal-producing unit. The characteristics of the charcoal produced were determined to be composed of 9% moisture content, 1.5% ash content, 38% charcoal yield and a heating value of 27.53 MJ/kg. On the other hand, the wet scrubber integrated into a brick kiln was found to remove Hydrocarbons, CO2 and CO by 97.8%, 98.5% and 99% respectively, which makes it efficient and practical way of controlling the gasses released during producing of charcoal.
ABSTRACT
The replacement of the conventional chromium tanning system with an eco-benign tanning systems has received great attention owing to stringent environmental regulations. In this specific study, a chrome-free combination tanning system based on chestnut and tetrakis (hydroxymethyl) phosphonium sulfate (THPS) was developed and presented as an effective alternative cleaner tanning technology. Processing of the tanning trials were carried out varying the percentages of chestnut as a tannage, followed by THPS as a re-tannage for process optimization. The leathers obtained were characterized for their thermal stability, grain surface properties using a scanning electron microscope, physical strength characteristics, comfort, and organoleptic properties. Finally, the environmental impact of the tanning systems was assessed through the comparative analysis of their spent liquors. The chestnut-THPS combination system tanned leathers using 20 % chestnut followed by 2 % THPS resulted in maximum shrinkage temperature of 95OC. The hydrothermal stability of the leathers tanned using this combination tanning system were found to be better than those tanned using chestnut and THPS tanning systems alone, respectively. The strength and comfort properties of the leathers produced using the developed combination tanning system were found to be on par with or better than those of conventionally tanned leathers, and the scanning electron microscopic study depicted that the grain surface of the leathers produced were observed to be free of surface deposition. The environmental impact assessment showed that the combination tanning system used resulted in a significant reduction in TS, TDS, TSS, and BOD in the wastewater. This research article has attempted and established the use of chestnut-THPS-based combination tanning systems as an effective, eco-friendly alternative tanning process technology.
ABSTRACT
Methyl orange is abundantly present in wastewater generated from textile industries causing serious human health and environmental problems. Therefore, this study was aimed at preparing a low cost and effective biosorbent from the stem of Rumex abyssinicus plant for the removal of methyl orange from aqueous solution. Characterization of the prepared adsorbent material was carried out using a pH point of zero charge, Scanning Electron microscope (SEM), Fourier Transform Infrared (FTIR) spectroscopy and X-Ray Diffraction (XRD). The design and optimization of methyl orange batch adsorption was carried out using the Box Behnken approach to Response Surface methodology aiming to reduce the experimental runs and time with adequate results. The characterization of the adsorbent revealed 7.9 (pHpzc), porous and heterogonous surface (SEM), presence of multiple functional groups (FTIR) and amorphous structure (XRD). The maximum removal efficiency of 98.5 % was found at pH, contact time, Methyl orange concentration and adsorbent dosage of 6, 60 min, 20 mg/L and 0.2 g/100 mL respectively. The isotherm studies were carried out using Langmuir, Freundlich, Toth and Koble Corrigan models in which Freundlich isotherm with a maximum R2 of 0.95 was found to fit data best showing heterogeneous and multilayer surface interaction. On the other hand, a kinetics study revealed that pseudo-second-order fitted the data best. Moreover, the thermodynamics analysis showed the nature of the adsorption to be endothermic, spontaneous and feasible. Generally, this work proved that the low-cost, environmentally friendly and easily prepared Rumex abyssinicus-based material could be an alternative adsorbent for dye detoxification at an industrial scale.
ABSTRACT
The potential for malachite green dye saturated effluent to severely affect the environment and human health has prompted the search for effective treatment technologies. Thus, this study was conducted with the goal of developing activated carbon from Rumex abyssinicus for the adsorptive removal of malachite green dye from an aqueous solution. Unit operations such as drying, size reduction, impregnation with H3PO4, and thermal activation were used during the preparation of the activated carbon. An experiment was designed considering four main variables at their respective three levels: initial dye concentration (50, 100, and 150 mg/L), pH (3, 6, and 9), contact period (20, 40, and 60 min), and adsorbent dosage (0.05, 0.01, and 0.15 g/100 mL). Optimization of the batch adsorption process was carried out using the Response Surface methodology's Box Behnken approach. The characterization of the activated carbon was described by SEM for surface morphology with cracks and highly porous morphology, FTIR for multi-functional groups O-H at 3506.74 cm-1 and 3290.70 cm-1, carbonyl group stretching from aldehyde and ketone (1900-1700 cm-1), stretching motion of aromatic ring C=C (1543.12 cm-1), stretching motion of -C-H (1500-1200 cm-1), vibrational and stretching motion of -OH (1250.79 cm-1), and vibrational motion of C-O-C (1049.32 cm-1), pHpzc of 5.1, BET for the specific surface area of 962.3 m2/g, and XRD for the presence of amorphous structure. The maximum and minimum dye removal efficiencies of 99.9% and 62.4% were observed at their respective experimental conditions of (100 mg/L, 0.10 mg/100 mL, pH 6, and 40 min) and (100 mg/L, 0.15 mg/100 mL, pH 3, and 20 min), respectively. Langmuir, Freundlich, Toth, and Koble-Corrigan models were used to evaluate the experimental data, in which Koble-Corrigan model was found to be the best fit with the highest value of R2 0.998. In addition to this, the kinetic studies were undertaken using pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Boyd models, and as a result, the pseudo-second-order model proved to have a better fit among the kinetic models. The kinetics and isotherm analysis revealed that the nature of the adsorption to be homogenous and monolayer surfaces driven by chemosorption. Furthermore, the thermodynamics study revealed the nature of adsorption to be feasible, spontaneous, and endothermic. On the other hand, the reusability study depicted the fact that the adsorbent can be utilized for five cycles with a negligible drop in the removal efficiencies from 99.9 to 95.2%. Finally, the low-cost, environmentally benign, and high adsorption capacity of the adsorbent material derived from Rumex abyssinicus stem could be used to treat industrial effluents.
ABSTRACT
The environmental pollution and human health impacts associated with the discharge of massive dye-containing effluents necessitate a search for cost-effective treatment technology. Therefore, this research work is conducted with the objective of investigating the potential of Rumex abyssinicus-derived activated carbon (RAAC) for the adsorption of Brilliant Blue Reactive (BBR) dye from aqueous solutions. Chemical activation with H3PO4 followed by pyrolysis was used to prepare the adsorbent. Characterization of the developed adsorbent was done using proximate analysis, pH point of zero charge (pHpzc), scanning electron microscope (SEM), Fourier transform infrared spectrometer (FTIR), Brunauer, Emmett, and Teller (BET), and X-ray diffraction (XRD). The experimental design and the effect of independent variables including pH (2, 6, and 10), initial dye concentration (50, 100, and 150 mg/L), adsorbent dosage (0.05, 0.1, and 0.15 g/100 mL), and contact time (20, 50, and 80 min) were optimized using the response surface methodology (RSM) coupled with Box Behnken design (BBD). The analysis results revealed the exitance of high specific surface area of 524 m2/g, morphological cracks, and the presence of multiple functional groups like -OH, C=C, alkene, and amorphous structure. Maximum removal efficiency of 99.98% was attained at optimum working conditions of pH 2, contact time of 50 min, dye concentration of 100 mg/L, and adsorbent dosage of 0.15 mg/100 mL, reducing the pollutant concentration from 100 to 0.02 mg/L. Evaluation of the experimental data was done using Langmuir, Freundlich, Temkin, and Sips isotherm models, in which the Langmuir model was found to be the best fit with the experimental data at R2 0.986. This shows that the adsorbent surface is homogeneous and mono-layered. Furthermore, the kinetic study confirmed that the pseudo second-order model best describes the experimental data with R2 = 0.999. In general, the research work showed that the low cost, environmental friendliness and high adsorption capabilities of the activated carbon derived from Rumex abyssinicus could be taken as an effective nt for the removal of BBR dye from aqueous solutions.
ABSTRACT
Methylene blue (MB) is abundantly found in textile industrial effluent which can cause severe health problems for public and environmental ecology. Therefore, this study aimed to remove MB from textile wastewater using the activated carbon developed from Rumex abyssinicus. The adsorbent was activated using chemical and thermal methods, and then it was characterized by SEM, FTIR, BET, XRD, and pH zero-point charge (pHpzc). The adsorption isotherm and kinetics were also investigated. The experimental design was composed of four factors at three levels (pH (3, 6, and 9), initial MB concentration (100, 150, and 200 mg/L), adsorbent dosage (20, 40, and 60 mg/100 mL), and contact time (20, 40, and 60 min)). The adsorption interaction was evaluated using response surface methodology. The characterization of a Rumex abyssinicus activated carbon was found to have multiple functional groups (FTIR), an amorphous structure (XRD), crack with ups and down morphology (SEM), pHpzc of 5.03 and a high BET-specific surface area of 2522 m2/g. The optimization of MB dye removal was carried out using the Response Surface methodology coupled with the Box Behnken approach. The maximum removal efficiency of 99.9% was recorded at optimum conditions of pH 9, MB concentration of 100 mg/L, the adsorbent dosage of 60 mg/100 mL, and contact time of 60 min. Among the three adsorption isotherm models, the Freundlich isotherm model was the best fit with an experimental value at R2 0.99 showing the adsorption process was heterogeneous and multilayer whereas the kinetics study revealed that pseudo-second-order at R2 0.88. Finally, this adsorption process is quite promising to be used at an industrial level.
