Intraocular lens calcification in a patient with Ehlers-Danlos syndrome.

Introduction: Calcification of hydrophilic intraocular lenses (IOL) is a rare complication following cataract surgery. Secondary calcification is described as due to host factors or changes in the IOL environment and uveitis, proliferative diabetic retinopathy and sequelae of ocular surgery are recognised potentiators. The impact of systemic connective tissue disease on IOL opacification is yet to described. Purpose: To describe the clinical presentation and management of a young patient, with a rare subtype of Ehlers-Danlos syndrome, who presented with secondary IOL calcification 14 years after primary IOL insertion. Observations: Floret-like lesions were observed on the IOL surface. Positive staining for calcification was observed with Alizarin red and von Kossa method on laboratory analysis. Conclusions and importance: Patients with systemic connective tissue disease, such as a subtype of Ehlers-Danlos, may present with secondary IOL calcification many years after primary lens insertion. This poses an additional consideration when implanting IOLs in these patients.Good visual acuity can be achieved with IOL exchange.

Evaluation of Parameters and Nozzle Tip Damage after Clinical Use of Three Hydrophilic Intraocular Lens Injector Models.

Purpose: To assess the nozzle tip damage and the parameters of three different hydrophilic intraocular lens (IOL) injector models. Methods: After routine cataract surgeries at the University Eye Hospital Heidelberg, all the used IOL injectors were collected from the operating room and sent to our laboratory. Nozzle tip damage was assessed under a microscope and graded as follows: no damage (grade 0), slight scratches (1), deep scratches (2), extensions (3), cracks (4), and bursts (5). Each damage grade was assigned a score from 0 to 5, and the total damage score for each injector system was calculated and compared. Nozzle tip parameters (diameters and areas), plunger tip parameters, and tip angles were also measured in each model. Results: The damage scores were (median, Q3-Q1): 1 (1-1) for Accuject, 1 (1-1) for Bluemixs, and 1 (1-1) for RayOne. There was no statistically significant difference in the damage scores between the study groups (P > 0.05). The outer cross-sectional vertical and horizontal diameters were 1.69 and 1.69 mm for Accuject, 1.69 and 1.69 mm for Bluemixs, and 1.70 and 1.71 mm for RayOne. Plunger tip areas were 0.78 mm2 for Accjuect, 0.74 mm2 for Bluemixs, and 0.43 mm2 for RayOne. Plunger tip area/inner cross-sectional area of the nozzle tip (%) was 31.2% for RayOne, 66.7% for Accuject, and 63.8% for Bluemixs. The tip angles for three injector models were 56° (Accuject), 56° (Bluemixs), and 44° (RayOne). Conclusions: All the injector models showed mild to moderate damage to the nozzle tip after IOL implantation, even with smaller diameter tips. RayOne resulted in the lowest ratio between plunger tip area and inner cross-sectional area of the nozzle tip and a better distribution of damage categories than the other two groups. All three injector models had relatively small tip parameters. If smaller incisions are required in certain patients, smaller tip parameters should be considered.

Evaluation of Nozzle Tip Damage in Intraocular Lens Injectors with V-Shaped Notch.

INTRODUCTION: Damage to the nozzle tips of intraocular lens (IOL) injectors has been associated with various adverse events and even IOL surface abnormalities after IOL implantation. In this study, nozzle tip damage of three different injector models with v-notched nozzle tips was systematically evaluated using our self-developed system - the Heidelberg Score for IOL injector damage. METHODS: Nozzle tip damage was categorized into 6 grades: no damage (grade 0), slight scratches (1), deep scratches (2), extensions (3), cracks (4), and bursts (5). Each grade was assigned to a score of 0-5. In each IOL injector group, all IOLs were divided into 2 subgroups based on IOL power: +15 to +21D group and +21 to +26D group. The total scores for each group were the sum of scores for all injectors in this group. Further analysis was performed on the nozzle tip configuration and parameters in each injector model. RESULTS: The median (Q1-Q3) for each injector group in group +15 to +21D was 1.5 (1-2) for Avansee, 4 (3-4) for iSert, and 4 (3-4) for multiSert. A statistically significant difference was found between Avansee and iSert (p < 0.001) as well as between Avansee and multiSert (p < 0.01) in terms of median scores. The median (Q1-Q3) for each injector group in group +21 to +26D was 1.5 (1-2) for Avansee, 4 (4-4) for iSert, and 3 (3-3.75) for multiSert. A statistically significant difference was found between Avansee and iSert in terms of median scores (p < 0.001). The outer cross-sectional diameters were 1.80 and 1.78 mm for Avansee, 1.70 and 1.69 mm for iSert, and 1.69 and 1.68 mm for multiSert. The radii of each notch-based circle were 0.21 mm (Avansee), 0.09 (iSert), and 0.06 (multiSert), respectively. The tip angles for three injector models were 48° (Avansee), 46° (iSert), and 37° (multiSert). CONCLUSIONS: Avansee showed the least nozzle tip damage of all three groups. Compared with our earlier study using preloaded injectors with intact endpieces, all the injector groups with v-notched nozzle tips had more damage to the nozzle tip. It was found that the closer the notch of the nozzle tip was to the letter "V," the more damaged the nozzle tip was after IOL implantation.

Observation of Asymmetric Oxidation Catalysis with B20 Chiral Crystals.

The study of heterogeneous reactions for enantiomeric processes based on inorganic crystals has been resurgent in recent years. However, the question remains how homochirality develops in nature and chemical reactions. Here, the successful growth of B20 group PdGa single crystals with different chiral lattices enabled us to achieve enantioselective recognition of 3,4-dihydroxyphenylalanine (DOPA) based on a new mechanism, namely orbital angular momentum (OAM) polarization. The orbital textures of PdGa crystals indicate large OAM polarization near the Fermi level and carrying opposite signs. A positive or negative magnetization in the [111] direction is expected depending on the chiral lattice of PdGa crystals. Due to this, the adsorption energies of PdGa crystals and DOPA molecules differ depending on how well the O-2p orbital of DOPA pairs with the Pd-4d orbital of PdGa. The results provide one possible explanation for how chirality arises in nature by providing an enantioselective route with pure inorganic crystals.

Experimental analysis of recommended corneal incision sizes in cataract surgery using 13 intraocular lens injector systems.

Smaller corneal incisions in cataract surgery are linked with a better visual outcome and less frequent postoperative endophthalmitis. The insertion of intraocular lens (IOL) injector systems into the anterior chamber of the eye to implant an IOL is associated with incision enlargement (IE) impeding these positive effects. The aim of this study was to compare manufacturers' recommended incision sizes (IS) of 13 different intraocular lens injector systems in regard of intraoperative IE and postoperative IS. In total, 499 corneal incisions in ex vivo porcine eyes were analyzed. The preoperative ISs depended on the recommended IS of the examined injector system. The IS was measured right before and after IOL injector insertion with an incision gauge set. There was intraoperative IE in 87% of the incisions with a mean IE of 0.26 ± 0.18 mm. IE was often significantly larger in small IS compared to larger IS concerning an injector system (P < 0.05). Five injector systems needed to have a significantly larger IS than the manufacturers' recommended IS with an average difference of 0.3 mm when applying study criteria (P < 0.05). Thus, the present study shows that IS recommendations require to be critically analyzed by ophthalmic surgeons to enable evidence-based practice.

Nozzle tip damage in three generations of intraocular lens injector models: an experimental laboratory study.

PURPOSE: To assess the nozzle tip damage of IOL injectors in three generations from the same manufacturer using the self-developed system-the Heidelberg Score for IOL Injector Damage. SETTING: David J Apple Center for Vision Research, Department of Ophthalmology, University Hospital Heidelberg, Heidelberg, Germany DESIGN: Experimental laboratory study METHODS: The nozzle tip damage of three injector models (Emerald, iTec, and Simplicity) was determined using the Heidelberg score for IOL injector damage. Damage to the nozzle tip was examined under a microscope and graded as follows: no damage (score 0), slight scratches (1), deep scratches (2), extensions (3), cracks (4) and bursts (5). The total scores for each injector system were the sum of scores for all injectors in this model. Total scores of the three injector systems were evaluated and compared. The nozzle tip parameters (diameters, tip angles) were also measured in each group. RESULTS: The Emerald system achieved the highest total scores, while the other two systems achieved similar total scores. There was no statistically significant difference in the total scores between the study groups (P > 0.05). The outer cross-sectional diameters were 2.10 and 2.10 mm for Emerald, 1.80 and 1.78 mm for iTec, and 1.78 and 1.80 mm for Simplicity. The thickness of the nozzle tips was 0.13 mm (Emerald), 0.17 mm (iTec) and 0.17 mm (Simplicity). The tip angle for three injector models was 35° (Emerald), 45° (iTec), and 45° (Simplicity). CONCLUSIONS: Although different injector models exhibited varying degrees of damage to the nozzle tip, all injector models generally showed relatively good results. Newer generations of IOL injector models tend to perform better in terms of nozzle tip damage after IOL implantation.

Intravitreal Application: Physicochemical Properties of Drugs Dissolved in Silicone Oils of Different Density in Comparison to the Porcine Vitreous Body.

Silicone oil endotamponades provide a reservoir for drugs in the eye. Following vitrectomy surgery to treat retinal detachments, extensive diabetic retinopathy or endophthalmitis, they can be used as long-term lipophilic depots. This study aimed to investigate the physicochemical properties of intravitreally applied drugs of different lipophilicity, namely vancomycin, ceftazidime and voriconazole. For this purpose, an in vitro model of the silicone-oil-filled eye compared to porcine vitreous bodies (PVBs) was used. In a glass container, either light or heavy silicone oil or PVB was set into equilibrium with an aqueous fluid. Vancomycin, voriconazole and ceftazidime were added in concentrations commonly applied in clinical practice. The time course of the concentration of the drugs was determined in the hydrophilic phase for up to 24 h. With silicone oil present, the concentrations of vancomycin, voriconazole and ceftazidime were elevated in the aqueous humor when compared to the vitreous body (p < 0.001 for all drugs). With increasing lipophilicity, higher concentrations of the drug dissolved in silicone oil after 24 h (52.7%, 49.1% and 34.3% for vancomycin, ceftazidime and voriconazole, respectively). While no difference between lighter- and heavier-than-water silicone oil was apparent for vancomycin and ceftazidime (p = 0.17 and p = 0.72), voriconazole dissolved significantly better in the heavier-than-water silicone oil (p = 0.002). A higher-than-expected percentage of the glycopeptide vancomycin dissolved in the porcine vitreous body, possibly due to protein binding. In conclusion, silicone oils influence the drug concentration and distribution of intravitreally applied drugs depending on their lipophilicity. The addition of F6H8 used to create heavy silicone oils attenuates these effects for lipophilic drugs. Knowledge of the distribution of these intravitreally applied drugs is crucial to ensure the desired anti-infectious effect.

Oxygen deficiency in Sr2FeO4-x: electrochemical control and impact on magnetic properties.

The oxygen-deficient system Sr2FeO4-x was explored by heating the stoichiometric Fe4+ oxide Sr2FeO4 in well-defined oxygen partial pressures which were controlled electrochemically by solid-state electrolyte coulometry. Samples with x up to about 0.2 were obtained by this route. X-ray diffraction analysis reveals that the K2NiF4-type crystal structure (space group I4/mmm) of the parent compound is retained. The lattice parameter a slightly decreases while the c-parameter increases with increasing x, which is in contrast to the Ruddlesden-Popper system Sr3Fe2O7-x and suggests removal of oxygen atoms from FeO2 lattice planes. The magnetic properties were studied by magnetization, 57Fe Mössbauer, and powder neutron diffraction experiments. The results suggest that extraction of oxygen atoms from the lattice progressively changes the elliptical spiral spin ordering of the parent compound to an inhomogeneous magnetic state with coexistence of long-range ordered regions adopting a circular spin spiral and smaller magnetic clusters.

A laboratory evaluation of nozzle tip damage in four generations of intraocular lens injector systems using a self-developed damage scale.

During intraocular lens (IOL) implantation it is not uncommon for the injector's nozzle-tip to get damaged. However, the damage has not been systematically described or evaluated using an objective scale. In this study we developed our own system-the Heidelberg Score for IOL Injector Damage ("HeiScore"), which was used to grade 60 injectors from four generations of injector models (Monarch III D, AcrySert C, UltraSert, AutonoMe) made by the same manufacturer. (Alcon Laboratories Inc.) HeiScore has six grades of nozzle-tip damage: no damage (which was graded 0); slight scratches (1), deep scratches (2), extensions (3), cracks (4) and bursts (graded number 5). The score for each injector model was the sum of all grades (total number), and we could compare the four injector models. The injectors showed varying damage profiles, from "no damage" to "crack". A tendency of a lower damage score in the newer generations of IOL injectors was noted. However, a statistically significant difference was observed only between Monarch III D and AutonoMe. The "Heidelberg Score for IOL Injector Damage" could efficiently and effectively evaluate the damage to IOL injector systems, which might help manufacturers optimize the positioning of the IOL in the injector during pre-loading.

Direct regulation of shikimate, early phenylpropanoid, and stilbenoid pathways by Subgroup 2 R2R3-MYBs in grapevine.

The stilbenoid pathway is responsible for the production of resveratrol in grapevine (Vitis vinifera L.). A few transcription factors (TFs) have been identified as regulators of this pathway but the extent of this control has not been deeply studied. Here we show how DNA affinity purification sequencing (DAP-Seq) allows for the genome-wide TF-binding site interrogation in grape. We obtained 5190 and 4443 binding events assigned to 4041 and 3626 genes for MYB14 and MYB15, respectively (approximately 40% of peaks located within −10 kb of transcription start sites). DAP-Seq of MYB14/MYB15 was combined with aggregate gene co-expression networks (GCNs) built from more than 1400 transcriptomic datasets from leaves, fruits, and flowers to narrow down bound genes to a set of high confidence targets. The analysis of MYB14, MYB15, and MYB13, a third uncharacterized member of Subgroup 2 (S2), showed that in addition to the few previously known stilbene synthase (STS) targets, these regulators bind to 30 of 47 STS family genes. Moreover, all three MYBs bind to several PAL, C4H, and 4CL genes, in addition to shikimate pathway genes, the WRKY03 stilbenoid co-regulator and resveratrol-modifying gene candidates among which ROMT2-3 were validated enzymatically. A high proportion of DAP-Seq bound genes were induced in the activated transcriptomes of transient MYB15-overexpressing grapevine leaves, validating our methodological approach for delimiting TF targets. Overall, Subgroup 2 R2R3-MYBs appear to play a key role in binding and directly regulating several primary and secondary metabolic steps leading to an increased flux towards stilbenoid production. The integration of DAP-Seq and reciprocal GCNs offers a rapid framework for gene function characterization using genome-wide approaches in the context of non-model plant species and stands up as a valid first approach for identifying gene regulatory networks of specialized metabolism.

Comparison of a new IOL injector system against 3 standard IOL injector systems with different incision sizes: Miyake-Apple view experimental laboratory study.

PURPOSE: To compare 1 new intraocular lens (IOL) injector system against 3 standard injector systems in porcine eyes. SETTING: David J Apple Center for Vision Research, Department of Ophthalmology, University Hospital Heidelberg, Heidelberg, Germany. DESIGN: In vitro laboratory study. METHODS: In 70 porcine eyes, +20.0 diopter IOLs were implanted with the following systems: multiSert, UltraSert, iTec, and RayOne, that is, S1.8 (incision size: 1.8 mm), S2.0 (2.0 mm), S2.2P (2.2 mm, push mode), S2.2S (2.2 mm, screw mode), U2.2 (2.2 mm), iT2.2 (2.2 mm), and R2.0 (2.0 mm). Corneal incision sizes were measured before and after implantation with an incision gauge set. Ease of use was evaluated using a Likert scale. IOL delivery time and performance were determined based on Miyake-Apple view videos. RESULTS: Of the 70 eyes studied, the incision enlargements were 0.36 ± 0.08 mm (S1.8), 0.15 ± 0.07 mm (S2.0), 0.17 ± 0.12 mm (S2.2P), 0.28 ± 0.10 mm (S2.2S), 0.32 ± 0.09 mm (U2.2), 0.30 ± 0.08 mm (iT2.2), and 0.35 ± 0.11 mm (R2.0). Total scores of ease of use were 23.00 (S1.8), 25.00 (S2.0), 29.00 (S2.2P), 26.00 (S2.2S), 26.00 (U2.2), 25.00 (iT2.2), and 24.00 (R2.0). As for the mean delivery time, iT2.2 took the longest time (13.20 ± 3.29 seconds), whereas S2.2S took the shortest time (4.50 ± 0.71 seconds). Optic-haptic adhesion was observed in S1.8 (4, 40%), S2.2P (2, 20%), U2.2 (5, 50%), and iT2.2 (5, 50%). CONCLUSIONS: Injector S, with the appropriate incision size and implantation method, could achieve better results regarding incision enlargement, ease of use, delivery time, and performance than other injector systems. There was an indirect relationship between incision size and inadvertent events.

Implantation of an Artificial Endothelial Layer for Treatment of Chronic Corneal Edema.

PURPOSE: The purpose of this study was to describe a novel device that may serve as an alternative to Descemet membrane endothelial keratoplasty (DMEK) for the treatment of chronic corneal edema. METHODS: The EndoArt (EyeYon Medical, Israel) is a flexible, 50-µm thin artificial endothelial layer that matches the cornea's posterior curvature and functions as a fluid barrier at the posterior stroma, replacing the diseased endothelium. Similar to a DMEK approach, it is implanted into the anterior chamber, carefully positioned on the posterior stroma, and secured using an air-gas mixture. Two patients with chronic corneal edema resulting from endothelial decompensation underwent implantation of the new artificial lamella. RESULTS: In patient 1, the central corneal thickness (CCT) decreased from 730 µm preoperatively to 593 µm at 1 day postoperatively. In patient 2, the CCT decreased from 761 µm preoperatively to 487 µm at 1 day postoperatively. Both patients reported high satisfaction and an overall brighter visual quality. Although dislocation of the lamella occurred in both cases, the CCT was promptly restored after a repositioning procedure and remained stable at the 17-month follow-up (CCT of 526 and 457 µm for patients 1 and 2, respectively). In contrast to DMEK donor tissue, the artificial lamella is sufficiently robust to allow easy intraocular manipulation without the risk of damaging the implant. It is easily removable and does not require any immunosuppressive treatment because of its nonbiological nature. CONCLUSIONS: Implantation of the EndoArt led to rapid corneal deturgescence and CCT restoration, presenting a possible option for patients with chronic corneal edema.

In-vitro glistening formation in six different foldable hydrophobic intraocular lenses.

BACKGROUND: Glistenings describe small, refractile microvacuoles that may arise within the intraocular lens (IOL) material and reduce the patients' quality of vision. Lenses composed of hydrophobic acrylic material are particularly affected by glistening formation. In this study, we compared the tendency of glistening formation in six different types of hydrophobic acrylic intraocular lenses (IOLs). METHODS: We used a well-established accelerated laboratory method to develop glistenings in the following IOLs: Vivinex XY1 (Hoya), AcrySof SN60WF (Alcon), Tecnis ZCB00 (AMO), Avansee PN6A (Kowa), Aktis SP NS-60YG (Nidek), and CT Lucia 601P (Zeiss). IOLs were first immersed in saline at 45 °C for 24 h and then at 37 °C for 2.5 h in a water bath. Microvacuole (MV) density and size (Miyata grading) were documented and calculated using an image analysis program. RESULTS: The mean glistening density [MV/mm2] and mean Miyata grading (in brackets) were: Vivinex: 11.6 ± 5.7 (0), SN60WF: 264.4 ± 110.3 (2.6), Tecnis: 6.0 ± 2.8 (0), Avansee: 2.2 ± 0.7 (0), Aktis: 851.4 ± 59.4 (3+) and CT Lucia: 71.0 ± 71.6 (1). CONCLUSIONS: While all tested IOLs showed glistenings with the accelerated laboratory method, the Aktis and SN60WF showed the highest microvacuole density, followed by the CT Lucia. In comparison, the Vivinex, Tecnis, and Avansee IOLs showed far fewer number of glistenings.

Process development and safety evaluation of ABCB5+ limbal stem cells as advanced-therapy medicinal product to treat limbal stem cell deficiency.

BACKGROUND: While therapeutic success of the limbal tissue or cell transplantation to treat severe cases of limbal stem cell (LSC) deficiency (LSCD) strongly depends on the percentage of LSCs within the transplanted cells, prospective LSC enrichment has been hampered by the intranuclear localization of the previously reported LSC marker p63. The recent identification of the ATP-binding cassette transporter ABCB5 as a plasma membrane-spanning marker of LSCs that are capable of restoring the cornea and the development of an antibody directed against an extracellular loop of the ABCB5 molecule stimulated us to develop a novel treatment strategy based on the utilization of in vitro expanded allogeneic ABCB5+ LSCs derived from human cadaveric limbal tissue. METHODS: We developed and validated a Good Manufacturing Practice- and European Pharmacopeia-conform production and quality-control process, by which ABCB5+ LSCs are derived from human corneal rims, expanded ex vivo, isolated as homogenous cell population, and manufactured as an advanced-therapy medicinal product (ATMP). This product was tested in a preclinical study program investigating the cells' engraftment potential, biodistribution behavior, and safety. RESULTS: ABCB5+ LSCs were reliably expanded and manufactured as an ATMP that contains comparably high percentages of cells expressing transcription factors critical for LSC stemness maintenance (p63) and corneal epithelial differentiation (PAX6). Preclinical studies confirmed local engraftment potential of the cells and gave no signals of toxicity and tumorgenicity. These findings were sufficient for the product to be approved by the German Paul Ehrlich Institute and the U.S. Food & Drug Administration to be tested in an international multicenter phase I/IIa clinical trial (NCT03549299) to evaluate the safety and therapeutic efficacy in patients with LSCD. CONCLUSION: Building upon these data in conjunction with the previously shown cornea-restoring capacity of human ABCB5+ LSCs in animal models of LSCD, we provide an advanced allogeneic LSC-based treatment strategy that shows promise for replenishment of the patient's LSC pool, recreation of a functional barrier against invading conjunctival cells and restoration of a transparent, avascular cornea.

Quantification of the In Vitro Predisposition to Glistening Formation in One Manufacturer's Acrylic Intraocular Lenses Made in Different Decades.

INTRODUCTION: Foldable hydrophobic acrylic intraocular lenses (IOLs) are prone to develop a long-term postoperative material change called glistenings. The aim of this study was to investigate the changes in the predisposition for glistening formation in one type of hydrophobic acrylic IOL material from its introduction to the present day. METHODS: In a laboratory setup, an in vitro model was used to induce glistenings in hydrophobic acrylic IOLs manufactured by one company (Alcon, Fort Worth, TX, USA) in different years: 23 1990s-manufacture hydrophobic acrylic three-piece IOLs (MA30BA/MA60AC) that were explanted in 1996 and 1997, and five of each of the newer AcrySof IOL models (MA60AC, SA60AT, TFNT00 and SN60WF) from 2014 to 2017. Furthermore, five Clareon (SY60WF) IOLs were put through the same accelerated aging procedure. The number of microvacuoles per square millimeter (MV/mm2) was determined in the central part of each IOL optic and compared between the groups. RESULTS: The mean number of MV was highest in the 1990s-manufacture Alcon acrylic IOLs, with 1289 (± 738) MV/mm2. The number decreased to 650 (± 101), 192 (± 105), 175 (± 112) and 47 (± 26) for MA60AC, SA60AT, TFNT00 and SN60WF, respectively. The lowest count was obtained in the Clareon group, with 1 (± 1) MV/mm2. CONCLUSIONS: A high number of glistenings was induced in the explanted IOLs from the 1990s. The propensity for glistening formation decreased considerably after that decade and now in current use. Even though in vitro glistening formation in today's AcrySof material was low, the Clareon material was essentially glistenings-free.

SARS-CoV-2: Impact on, Risk Assessment and Countermeasures in German Eye Banks.

INTRODUCTION: Since the beginning of the COVID-19 pandemic there has been some debate regarding the risk of transmission through tissue transplantation and tissue banking processes. AIM OF THE STUDY: To analyze the changes that SARS-CoV-2 has caused regarding the harvesting of corneal donor tissue and eye bank activities in Germany. METHODS: A questionnaire was provided to 26 eye banks in Germany, consisting of questions about adaptations made in the screening of potential donors and the harvesting of corneal tissue following the pandemic spread of SARS-CoV-2. RESULTS: Eighteen eye banks actively reduced recruitment of donors and two banks ceased all activity. Additional diagnostic screening was performed in eight banks, using conjunctival swabs and/or nasopharyngeal swabs. In six eye banks, additional protective measures, such as FFP2 masks and/or facial shields, were implemented. Overall, a mean reduction in the number of obtained donor tissues of 17% was observed. DISCUSSION: Conjunctival and/or nasopharyngeal swabs of donors have been implemented by a minority. Reasons for not performing additional tests may be moderate sensitivity and lack of validation for postmortem use of RT-PCR testing. Also, the hazard of SARS-CoV-2 entering the corneal donor pool with subsequent transmission might be perceived as theoretical. Face shields provide a sufficient barrier against splash and splatter contamination but may be insufficient against aerosols. Additional face masks would provide support against aerosols, but it remains debatable if corneal harvesting can be considered an aerosol-producing procedure. In the future we expect to see changes in current guidelines because of a surge in scientific activities to improve our understanding of the risks involved with cornea donation in the COVID-19 pandemic, and because current practice may reduce the availability of donor corneas due to new exclusion criteria while the demand remains unchanged.

Clinical Application of Infrared-Light Microperimetry in the Assessment of Scotopic-Eye Sensitivity.

Purpose: The eye can see pulsed near-infrared (IR) radiation with the color corresponding to half of the wavelength used. Until recently, the technology required for measuring IR vision was confined to optical laboratories and was not studied clinically. The current investigation sought to determine the values for IR thresholds in a healthy population. Methods: IR-light threshold was measured in 45 healthy participants, aged from 21 to 70 years. Ten patients with retinal pathology were included for comparison. Ocular media clarity was assessed with a straylight parameter. The sensitivity of dark-adapted eyes (expressed on a 0-26 dB scale) were tested using an IR microperimeter. The device consists of a femtosecond laser that emits 1045 nm light to project a stimulus at the retina. Results: All participants were able to see the IR stimulus, which they perceived as green, and all performed the test. Measurements at seven locations revealed lower sensitivity at the fovea (15.5 dB) than in paracentral regions (18.2 dB). We noted a significant straylight increase with age. Although, in our study population, it was only a slight, -0.18 dB decline per decade of the average IR-sensitivity. The retinal-pathology group demonstrated impaired sensitivity to IR light. Conclusions: We showed that IR-light sensitivity does not significantly decrease with age despite a straylight increase. A reference level for the IR threshold was proposed. The application of IR-light microperimetry can be extended to the assessment of retinal pathology. Translational Relevance: IR-light microperimetry could be applied clinically to measure visual function.

Variation in intraocular lens calcification under different environmental conditions in eyes with supplementary sulcus-supported lenses.

PURPOSE: Analysis of explanted intraocular lenses (IOLs) from pseudophakic eyes with supplementary sulcus-supported IOLs. METHODS: In this laboratory investigation, ten supplementary and capsular bag IOLs were analyzed. All lenses were received between January 2012 and March 2018. Explants were examined morphologically with histological and electron microscopic techniques and patients' medical history was evaluated. Additionally, we used a technique new to this field: Transmission Electron Microscopy and electron diffraction pattern analysis was performed to investigate the structure of the opacifying crystals in detail. RESULTS: Eleven lenses were explanted due to IOL opacification from seven polypseudophakic eyes: In three cases the supplementary lens calcified, in three cases the capsular bag IOL (both lenses analyzed) and in one case both IOLs (only the supplementary was received). Additional surgical procedures and comorbidities included pars plana vitrectomy or Descemet stripping endothelial keratoplasty and diabetes mellitus. For each opacified lens, a varying layer of a Calcium phosphate beneath the optic surface was apparent. Crystal characterization revealed its composition to be Hydroxyapatite. CONCLUSIONS AND IMPORTANCE: We report on a series of secondary calcification in lenses explanted from polypseudophakic eyes. In some cases, calcification occurred in the capsular bag lens, in other cases in the supplementary lens, or in both. The severity of the morphological change could be related to the comorbidities and the presence of surgery subsequent to the lens implantations. Detailed morphology of the opacifying crystals was revealed.

Correction: Ray propagation imaging and optical quality evaluation of different intraocular lens models.

[This corrects the article DOI: 10.1371/journal.pone.0228342.].