Development of tethered dual catalysts: synergy between photo- and transition metal catalysts for enhanced catalysis.

While dual photocatalysis-transition metal catalysis strategies are extensively reported, the majority of systems feature two separate catalysts, limiting the potential for synergistic interactions between the catalytic centres. In this work we synthesised a series of tethered dual catalysts allowing us to investigate this underexplored area of dual catalysis. In particular, Ir(i) or Ir(iii) complexes were tethered to a BODIPY photocatalyst through different tethering modes. Extensive characterisation, including transient absorption spectroscopy, cyclic voltammetry and X-ray absorption spectroscopy, suggest that there are synergistic interactions between the catalysts. The tethered dual catalysts were more effective at promoting photocatalytic oxidation and Ir-catalysed dihydroalkoxylation, relative to the un-tethered species, highlighting that increases in both photocatalysis and Ir catalysis can be achieved. The potential of these catalysts was further demonstrated through novel sequential reactivity, and through switchable reactivity that is controlled by external stimuli (heat or light).

Controlling the selectivity and efficiency of the hydrogen borrowing reaction by switching between rhodium and iridium catalysts.

The catalytic alkylation of ketones with alcohols via the hydrogen borrowing methodology (HB) has the potential to be a highly efficient approach for forming new carbon-carbon bonds. However, this transformation can result in more than one product being formed. The work reported here utilises bidentate triazole-carbene ligated iridium and rhodium complexes as catalysts for the selective formation of alkylated ketone or alcohol products. Switching from an iridium centre to a rhodium centre in the complex resulted in significant changes in product selectivity. Other factors - base, base loading, solvent and reaction temperature - were also investigated to tune the selectivity further. The optimised conditions were used to demonstrate the scope of the reaction across 17 ketones and 14 alcohols containing a variety of functional groups. A series of mechanistic investigations were performed to probe the reasons behind the product selectivity, including kinetic and deuterium studies.

Simple and reactive Ir(i) N-heterocyclic carbene complexes for alkyne activation.

Two simple unsymmetrical monometallic Ir(i) complexes with an N-heterocyclic carbene ligand and an analogous bimetallic Ir(i) complex were synthesised. These complexes were found to be extremely active catalysts for a range of C-X (X = N or O) and Si-N bond forming reactions involving alkyne and imine activation for dihydroalkoxylation, hydroamination and hydrosilylation reactions. These catalysts exhibited reaction rates far exceeding those of other Rh(i) and Ir(i) complexes previously reported. In addition, a small change to the ligand design (phenyl vs. mesityl) substantially affected both the reactivity and product selectivity of the catalyst. The Ir(i) complex bearing a mesitylene wingtip provided unprecedented regioselectivity in the dihydroalkoxylation reaction and a new kinetic product from the typical hydrosilylation protocol of 2-benyzlpyrroline to produce an N-silylaminoalkene. Our mechanistic studies indicated that this transformation proceeded via a dehydrogenative coupling mechanism.

Harnessing asymmetric N-heterocyclic carbene ligands to optimise SABRE hyperpolarisation.

The catalytic signal amplification by reversible exchange process has become widely used for the hyperpolarisation of small molecules to improve their magnetic resonance detectability. It harnesses the latent polarisation of parahydrogen, and involves the formation of a labile metal complex that often contains an N-heterocyclic carbene (NHC) ligand (e.g. [Ir(H)2(NHC)(pyridine)3]Cl), which act as a polarisation transfer catalyst. Unfortunately, if the target molecule is too bulky, binding to the catalyst is poor and the hyperpolarisation yield is therefore low. We illustrate here the behaviour of a series of asymmetric NHC containing catalysts towards 3,4- and 3,5-lutidine in order to show how catalyst design can be used to dramatically improve the outcome of this catalytic process for sterically encumbered ligands.

Highly Efficient Rh(I) Homo- and Heterogeneous Catalysts for C-N Couplings via Hydrogen Borrowing.

Rhodium(I) complexes were explored as catalysts for the hydrogen borrowing reactions of amines and alcohols. Bidentate carbene-triazole ligands were readily synthesized via "click" reactions which allowed a diversity of ligand backbones to be accessed. The catalytic transformations are highly efficient, able to reach completion in under 6 h, and promote C-N bond formation across a range of primary alcohol and amine substrates. Moreover, site-selective catalysis can be achieved using substrates with more than one reactive site. A rhodium(I) complex covalently attached to a carbon black surface was also deployed in the hydrogen borrowing coupling reaction of aniline with benzyl alcohol. This represents the first report of a heterogeneous rhodium catalyst used for hydrogen borrowing.

Highly versatile heteroditopic ligand scaffolds for accommodating group 8, 9 & 11 heterobimetallic complexes.

Two highly versatile xanthene scaffolds containing pairs of heteroditopic ligands were found to be capable of accommodating a range of transition metal ions, including Au(i), Ir(i), Ir(iii), Rh(i), and Ru(ii) to generate an array of heterobimetallic complexes. The metal complexes were fully characterised and proved to be stable in the solid and solution state, with no observed metal-metal scrambling. Heterobimetallic complexes containing the Rh(i)/Ir(i) combinations were tested as catalysts for the two-step dihydroalkoxylation reaction of alkynediols and sequential hydroamination/hydrosilylation reaction of alkynamines.

Gold(III) NHC Complexes for Catalyzing Dihydroalkoxylation and Hydroamination Reactions.

A gold(III) complex of an N-heterocyclic carbene based hemilabile ligand with two pendant pyrazole arms (1,3-bis((1H-pyrazol-3-yl)methyl)-2,3-dihydro-1H-imidazole, LH) was synthesized. Complex [LAu(III)Cl3] is an excellent catalyst for promoting dihydroalkoxylation at room temperature, even catalyzing this reaction at 0 °C. [LAu(III)Cl3] is one of the most efficient catalysts reported to date for the spirocyclization of alkynyl diols. Furthermore, [LAu(III)Cl3] catalyzed intra- and intermolecular hydroamination reactions, achieving good to excellent conversions. [LAu(III)Cl3] is a more efficient catalyst than a gold(I) analogue, [LAu(I)Cl]. The dependence of the quantity of weakly coordinating anion [BArF4]- ((3,5-trifluoromethyl)phenyl borate) present on catalysis efficiency was probed for the dihydroalkoxylation reaction. X-ray diffraction analysis of single crystals demonstrated the solid-state structure of gold complexes [LAu(III)Cl3] and [LAu(I)Cl], which displayed the expected square-planar and linear coordination geometries, respectively.

Correction: Enhancements in catalytic reactivity and selectivity of homobimetallic complexes containing heteroditopic ligands.

Correction for 'Enhancements in catalytic reactivity and selectivity of homobimetallic complexes containing heteroditopic ligands' by Mark R. D. Gatus et al., Dalton Trans., 2017, 46, 7457-7466.

Enhancements in catalytic reactivity and selectivity of homobimetallic complexes containing heteroditopic ligands.

Rh(i) and Ir(i) homobimetallic complexes were synthesised using a heteroditopic ligand system on a xanthene scaffold containing a monodentate N-heterocyclic carbene ligand and a bidentate bis(pyrazol-1-yl)methane ligand. The complexes were tested as catalysts for the two-step dihydroalkoxylation and two-step hydroamination/hydrosilylation reactions. This is the first known report of an organometallic group 9 complex, Ir(i) bimetallic complex, 13, to selectively favour the opposite spirocyclisation product from that reported in the literature, 14cvs.14b. The Ir(i) homobimetallic complex catalyses the intramolecular hydroamination reaction of alkynamines efficiently and proved to be a highly active catalyst for promoting the subsequent hydrosilylation of the pyrrolines; completing the hydrosilylation reactions in less than 40 seconds. A chloro-bridged bimetallic species was observed in the solid state, revealing that the COD co-ligands present underwent an oxidation.

Ruthenium(ii) complexes of hemilabile pincer ligands: synthesis and catalysing the transfer hydrogenation of ketones.

A series of Ru(ii) complexes were synthesised based on a hemilabile pyrazole-N-heterocyclic carbene (NHC)-pyrazole (C3N2H3)CH2(C3N2H2)CH2(C3N2H3) NCN pincer ligand 1. All complexes were fully characterised using single crystal X-ray crystallography and multinuclear NMR spectroscopy. Hemilabile ligands provide flexible coordination modes for the coordinating metal ion which can play a significant effect on the efficiency and mechanism of catalysis by the resulting complex. Here we observed and isolated mono-, bi- and tri-dentate complexes of both Ag(i) and Ru(ii) with 1 in which the resultant coordination mode was controlled by careful reagent selection. The catalytic activity of the Ru(ii) complexes for the transfer hydrogenation reaction of acetophenone with isopropanol was investigated. The unexpected formation of the pentaborate anion, [B5O6(OH)4](-), during the synthesis of complex 6a was found to have an unexpected positive effect by enhancing the catalysis rate. This work provides insights into the roles that different coordination modes, counterions and ligand hemilability play on the catalytic activity in transfer hydrogenations.

A versatile method for the preparation of carbon-rhodium hybrid catalysts on graphene and carbon black.

Strategies for combining the selectivity and efficiency of homogeneous organometallic catalysts with the versatility of heterogeneous catalysts are urgently needed. Herein a direct and modular methodology is presented that provides rapid access to well-defined carbon-rhodium hybrid catalysts. A pre-synthesized Rh(i) complex containing a carbene-triazole ligand was found to be stable for direct immobilization onto unactivated graphene, carbon black and glassy carbon electrodes. Characterization of the heterogeneous systems using X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), inductively coupled plasma-optical emission spectroscopy/mass spectrometry (ICP-OES/MS), Raman spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirmed the well-defined nature of the hybrid catalysts. The hybrid catalysts show excellent activity, comparable to that of the homogeneous system for the hydrosilylation of diphenylacetylene, with turnover numbers ranging from 5000 to 48 000. These catalysts are the best reported to date for the hydrosilylation of diphenylacetylene. In common with conventional heterogeneous catalysts, high reusability, due to a lack of Rh metal leaching, was also observed for all carbon-rhodium complexes under investigation.

The advantages of covalently attaching organometallic catalysts to a carbon black support: recyclable Rh(i) complexes that deliver enhanced conversion and product selectivity.

Pure carbon black (CB) was covalently attached to a bidentate nitrogen coordination motif with a carbon-carbon bond by spontaneous reaction with an in situ generated ligand precursor. The functionalized support was treated with [Rh(CO)2(µ-Cl)]2 to form a heterogeneous carbon-based support covalently linked to a well defined Rh(i) coordination complex. The hybrid material was characterized using X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), Infrared (IR) spectroscopy and inductively coupled plasma mass spectrometry (ICP-MS). The CB-supported Rh(i) catalyst was active in both hydroamination and dihydroalkoxylation reactions achieving turnover numbers approaching 1000 and was readily recycled. The selectivity of an intramolecular dihydroalkoxylation reaction was significantly improved by covalently anchoring the catalyst to the CB surface.

Hemilabile and bimetallic coordination in Rh and Ir complexes of NCN pincer ligands.

Two new pincer ligands have been developed that contain a central N-heterocyclic carbene (NHC) moiety linked to two pendant pyrazole groups by either a methylene (NCN(me)) or ethylene (NCN(et)) chain. The coordination of these two ligands to rhodium and iridium resulted in a variety of binding modes. Tridentate coordination of the ligands was observed in the complexes [Rh(NCN(me))(COD)]BPh4 (8), [Ir(NCN(me))(COD)]BPh4 (10), [Rh(NCN(et))(CO)2]BPh4 (13), and [Ir(NCN(me))(CO)2]BPh4 (14), and monodentate NHC coordination was observed for [Ir(NCN(me))2(COD)]BPh4 (11) and [Ir(NCN(et))2(COD)]BPh4 (12). Both tridentate and bidentate coordination modes were characterized for [Rh(NCN(et))(COD)]BPh4 (9) in the solution and solid state, respectively, while an unusual bridging mode was observed for the bimetallic complex [Rh(µ-NCN(me))(CO)]2(BPh4)2 (15). The impact of this diverse coordination chemistry on the efficiency of the complexes as catalysts for the addition of NH, OH, and SiH bonds to alkynes was explored.

Solid-state NMR structure characterization of a 13CO-Labeled Ir(I) complex with a P,N-donor ligand including ultrafast MAS methods.

The structural characterization of a (13)CO-labeled Ir(I) complex bearing an P,N-donor ligand (1-[2-(diphenylphosphino)ethyl]pyrazole), [Ir(PyP)((13)CO)Cl] is demonstrated using a series of tailored solid-state NMR techniques based on ultrafast (60 kHz) Magic Angle Spinning (MAS), which facilitates correlations with narrow proton line-widths. Our 1D (1)H MAS and 2D (13)C and (31)P CP-MAS NMR spectra provided structural information similar to that obtained using NMR spectroscopy in solution. We employed high-resolution 2D solid-state correlation spectroscopy ((1)H-(13)C HETCOR, (1)H-(31)P correlation) to characterize the networks of dipolar couplings between protons and carbon/phosphorus. (1)H-(1)H SQ-SQ correlation spectra showed the dipolar contacts between all protons in a similar fashion to its solution counterpart, NOESY. The use of the (1)H single quantum/double quantum experiments made it possible to observe the dipolar-coupling contacts between immediately adjacent protons. Additionally, internuclear (13)CO-(31)P distance measurements were performed using REDOR. The combination of all of these techniques made it possible to obtain comprehensive structural information on the molecule [Ir(PyP)((13)CO)Cl] in the solid state, which is in excellent agreement with the single crystal X-ray structure of the complex, and demonstrates the enormous value of ultrafast MAS NMR techniques for a broad range of future applications.

Ruthenium(ii) complexes containing functionalised ß-diketonate ligands: developing a ferrocene mimic for biosensing applications.

Three series of ruthenium complexes with the general formula Ru(bpy)n(ß-diketonato)3-n (bpy = 2,2'-bipyridine, n = 0, 1, 2) were prepared and investigated using cyclic voltammetry and UV-vis spectroscopy. Variation of both the number and electronic demand of the ß-diketonato ligands resulted in well-defined modulation of the potential at which oxidation of the metal centre occurred. The observed potentials were shown to be in good agreement with calculated ligand electrochemical parameters. A novel ruthenium(ii) complex with electrochemical behaviour similar to that of ferrocene was identified.

Bi- and tri-metallic Rh and Ir complexes containing click derived bis- and tris-(pyrazolyl-1,2,3-triazolyl) N-N' donor ligands and their application as catalysts for the dihydroalkoxylation of alkynes.

A series of bi-topic and tri-topic pyrazolyl-1,2,3-triazolyl donor ligands (; = 1,X-bis((4-((1H-pyrazol-1-yl)methyl)-1H-1,2,3-triazol-1-yl)methyl)benzene (X = 2, 3 and 4; o-C6H4(PyT)2, m-C6H4(PyT)2 and p-C6H4(PyT)2) and = 1,3,5-tris((4-((1H-pyrazol-1-yl)methyl)-1H-1,2,3-triazol-1-yl)methyl)benzene, 1,3,5-C6H3(PyT)3) were conveniently synthesised in 'one pot' reactions using the Cu(i) catalysed 'click' reaction. Rh(i), Ir(i), Rh(iii) and Ir(iii) complexes with ligands of the general formulae C6H6-n[(PyT)M(CO)2]n[BAr]n (M = Rh, Ir; n = 2, 3; ; ) and C6H6-n[(PyT)MCp*Cl]n[BAr]n (M = Rh, Ir; n = 2, 3; ; ) were synthesised and fully characterised. In solution each of the bi- or tri-metallic complexes and exists as a mixture of two (, ) or three ( and ) diastereomers due to the presence of a chiral centre at each metal centre in these complexes. The solid state structures of complexes and were determined by single crystal X-ray crystallography and showed that each bidentate arm of these multitopic ligands coordinates to the Rh or Ir centre in a bidentate fashion via the pyrazolyl-N2 and 1,2,3-triazolyl N3' donors. The intermetallic distances in these solid state structures vary from 8.66 Å to 15.17 Å. These complexes were assessed as catalysts for the dihydroalkoxylation of alkynes using the cyclisation of 2-(5-hydroxypent-1-ynyl)benzyl alcohol, , to a mixture of two spiroketals, 2,3,4,5-tetrahydro-spirol[furan-2,3'-isochroman], , and 3',4',5',6'-tetrahydro-spiro[isobenzofuran-1(3H),2'(2H)pyran], , as the model reaction. The Rh(i) complexes (), with the highest TOF of 2052 h(-1) for complex , were the most active catalysts when compared with the other complexes under investigation here. The Ir(i) complexes () were moderately active as catalysts for the same transformation. No significant enhancement in catalytic reactivity was observed with the Rh(i) series bi- and trimetallic complexes () when compared with their monometallic analogues. The bi- and trimetallic Ir(i) complexes () were much more efficient as catalysts for this transformation than their monometallic analogues, suggesting some intermetallic cooperativity. Rh(iii), , and Ir(iii), , complexes were not active as catalysts for this transformation.

Rh(I) complexes bearing N,N and N,P ligands anchored on glassy carbon electrodes: toward recyclable hydroamination catalysts.

A series of N,N-donor ligands (bis(pyrazol-1-yl)methane (bpm), bis(N-methylimidazol-2-yl)methane (bim), 1-(phenylmethyl)-4-(1H-pyrazol-1-yl methyl)-1H-1,2,3-triazole (PyT)), and one N,P-donor ligand precursor (1-(3,5-dimethylpyrazol-1-yl)(2-bromoethane) (dmPyBr)) were synthesized and functionalized with aniline. Diazotization of the aniline into an aryl diazonium, using nitrous acid in aqueous conditions, was performed in situ such that the ligands could be reductively adsorbed onto glassy carbon electrode surfaces. The N,N-donor ligands (bpm, bim, PyT) were immobilized in a single step, while several steps were required to immobilize the N,P-donor ligand (dmPyP) to prevent oxidation of the phosphine group. The complexation of the anchored ligands with the metal complex precursor ([Rh(CO)2(µ-Cl)]2) led to the formation of anchored Rh(I) complexes with each of the ligands (bpm, bim, PyT, dmPyP). X-ray photoelectron spectroscopy (XPS) confirmed the formation of the anchored ligands as well as the anchored complexes. The surface coverage of functionalized electrodes was estimated by means of cyclic voltammetry, and the nature of the coverage was close to being a monolayer for each immobilized complex. The anchored Rh(I) complexes were active as catalysts for the intramolecular hydroamination of 4-pentyn-1-amine to form 2-methyl-1-pyrroline.

Cationic Rh and Ir complexes containing bidentate imidazolylidene-1,2,3-triazole donor ligands: synthesis and preliminary catalytic studies.

A series of new cationic Rh(I), Rh(III) and Ir(III) complexes containing hybrid bidentate N-heterocyclic carbene­1,2,3-triazolyl donor of general formulae [Rh(CaT)(COD)]BPh4 (2a­d), [Rh(CaT)(CO)2]BPh4 (3a­d) and [M(CaT)(Cp*)Cl]BPh4 (M = Rh, 4a­d; M = Ir, 5a­c), where CaT = bidentate N-heterocyclic carbene­triazolyl ligands, COD = 1,5-cyclooctadiene and Cp* = 1,2,3,4,5-pentamethylcyclopentadienyl, were synthesised. The imidazolium­1,2,3-triazolyl pre-ligands (1a­c and 1e­i) were readily prepared using the Cu(I) catalysed 'click reaction' between phenyl azide or benzyl azides with propargyl functionalised imidazolium salts. The single crystal solid state structures of complexes 2a­d; 3a­b; 4a­d and 5a­b confirm the bidentate coordination of the NHC­1,2,3-triazolyl ligand with the NHC coordinating via the 'normal' C2-carbon and the 1,2,3-triazolyl donor coordinating via the N3' atom to form six membered metallocycles. These complexes are the first examples of Rh and Ir complexes containing the hybrid NHC­1,2,3-triazolyl ligands which exhibit a bidentate coordination mode. A number of these complexes showed limited efficiency as catalysts for the intramolecular hydroamination of 4-pentyn-1-amine to 2-methylpyrroline.

Synthesis and structures of homo- and heterobimetallic rhodium(I) and/or iridium(I) complexes of binucleating bis(1-pyrazolyl)methane ligands.

The synthesis of a series of Rh(I) and Ir(I) homobimetallic complexes using three different linking scaffolds is described. The cyclooctadiene (COD) complexes [M(2)(COD)(2)(L(scaffold))][BAr(F)(4)](2) (2-7) where M = Rh(I) or Ir(I), and L(scaffold) = bis(1-pyrazolyl)methane ligands, p-C(6)H(4)[CH(pz)(2)](2) (1a), m-C(6)H(4)[CH(pz)(2)](2) (1b) and the anthracene-bridged 1,8-C(14)H(8)[CH(pz)(2)](2) (1c) were synthesized. The COD co-ligands of 2-7 were replaced with the carbonyl co-ligands to form the analogous homobimetallic complexes, [M(2)(CO)(4)(L(scaffold))][BAr(F)(4)](2) (8-13). The solid-state structures of the dicationic homobimetallic complexes 2, 3, 5, 6, 9, and 10, as well as cationic monometallic complexes 15 and 22 of ligands 1b and 1c respectively, were characterized using X-ray crystallography. The solid-state XRD structures of the resulting dirhodium and diiridium complexes with the para- and meta-phenylene and anthracene scaffolds show that there are distinct differences between structures of complexes 2-10 due to the variation in the scaffold structures, in particular the relative positions of the two metal centres. Heterobimetallic RhIr complexes of the m-C(6)H(4)[CH(pz)(2)](2) ligand were also synthesized using a stepwise approach, and the observed exchange of the metal centres in the heterobimetallic complexes was found to be dependent on the nature of the coligand.

3-Mercapto-2,6-pyridinedicarboxylic acid: a small lanthanide-binding tag for protein studies by NMR spectroscopy.

Paramagnetic effects from lanthanide ions present powerful tools for protein studies by nuclear magnetic resonance (NMR) spectroscopy provided that the lanthanide can be site-specifically and rigidly attached to the protein. A new, particularly small and rigid lanthanide-binding tag, 3-mercapto-2,6-pyridinedicarboxylic acid (3MDPA), was synthesized and attached to two different proteins via a disulfide bond. The complexes of the N-terminal domain of the E. coli arginine repressor (ArgN) with seven different paramagnetic lanthanide ions and Co(2+) were analyzed in detail by NMR spectroscopy. The magnetic susceptibility anisotropy (Delta chi) tensors and metal position were determined from pseudocontact shifts. The 3MDPA tag generated very different Delta chi tensor orientations compared to the previously studied 4-mercaptomethyl-DPA tag, making it a highly complementary and useful tool for protein NMR studies.