Magnon-phonon Fermi resonance in antiferromagnetic CoF2.

Understanding spin-lattice interactions in antiferromagnets is a critical element of the fields of antiferromagnetic spintronics and magnonics. Recently, coherent nonlinear phonon dynamics mediated by a magnon state were discovered in an antiferromagnet. Here, we suggest that a strongly coupled two-magnon-one phonon state in this prototypical system opens a novel pathway to coherently control magnon-phonon dynamics. Utilizing intense narrow-band terahertz (THz) pulses and tunable magnetic fields up to µ0Hext = 7 T, we experimentally realize the conditions of magnon-phonon Fermi resonance in antiferromagnetic CoF2. These conditions imply that both the spin and the lattice anharmonicities harvest energy from the transfer between the subsystems if the magnon eigenfrequency fm is half the frequency of the phonon 2fm = fph. Performing THz pump-infrared probe spectroscopy in conjunction with simulations, we explore the coupled magnon-phonon dynamics in the vicinity of the Fermi-resonance and reveal the corresponding fingerprints of nonlinear interaction facilitating energy exchange between these subsystems.

Long distance laser filamentation using Yb:YAG kHz laser.

In the framework of the Laser Lightning Rod project, whose aim is to show that laser-induced filaments can guide lightning discharges over considerable distances, we study over a distance of 140 m the filaments created by a laser system with J-range pulses of 1 ps duration at 1 kHz repetition rate. We investigate the spatial evolution of the multiple filamentation regime using the fundamental beam at 1030 nm or using combination with the second and third harmonics. The measurements were made using both a collimated beam and a loosely focused beam.

Nonlinear pulse compression of a 200 mJ and 1†kW ultrafast thin-disk amplifier.

We present a high-energy laser source consisting of an ultrafast thin-disk amplifier followed by a nonlinear compression stage. At a repetition rate of 5 kHz, the drive laser provides a pulse energy of up to 200 mJ with a pulse duration below 500 fs. Nonlinear broadening is implemented inside a Herriott-type multipass cell purged with noble gas, allowing us to operate under different seeding conditions. Firstly, the nonlinear broadening of 64 mJ pulses is demonstrated in an argon-filled cell, showing a compressibility down to 32 fs. Finally, we employ helium as a nonlinear medium to increase the energy up to 200 mJ while maintaining compressibility below 50 fs. Such high-energy pulses with sub-50 fs duration hold great promise as drivers of secondary sources.

Laser-guided lightning.

Lightning discharges between charged clouds and the Earth's surface are responsible for considerable damages and casualties. It is therefore important to develop better protection methods in addition to the traditional Franklin rod. Here we present the first demonstration that laser-induced filaments-formed in the sky by short and intense laser pulses-can guide lightning discharges over considerable distances. We believe that this experimental breakthrough will lead to progress in lightning protection and lightning physics. An experimental campaign was conducted on the Säntis mountain in north-eastern Switzerland during the summer of 2021 with a high-repetition-rate terawatt laser. The guiding of an upward negative lightning leader over a distance of 50 m was recorded by two separate high-speed cameras. The guiding of negative lightning leaders by laser filaments was corroborated in three other instances by very-high-frequency interferometric measurements, and the number of X-ray bursts detected during guided lightning events greatly increased. Although this research field has been very active for more than 20 years, this is the first field-result that experimentally demonstrates lightning guided by lasers. This work paves the way for new atmospheric applications of ultrashort lasers and represents an important step forward in the development of a laser based lightning protection for airports, launchpads or large infrastructures.

Nonlinear pulse compression of a thin-disk amplifier and contrast enhancement via nonlinear ellipse rotation.

We demonstrate pulse compressibility from 840 fs to 38 fs of 10 mJ pulses from a thin-disk amplifier at a repetition rate of 3 kHz after nonlinear broadening in a multipass cell. In addition, the temporal-intensity contrast is enhanced via nonlinear ellipse rotation of more than a factor 50 with an optical efficiency of 56%. We believe this is the first published experimental combination of multipass cell-based nonlinear compression and nonlinear ellipse rotation-based contrast enhancement preserving both pulse compressibility and beam quality.

Severe Calcaneus Injury Probability Curves Due to Under-Body Blast.

The lower extremity is the most frequently injured body region to mounted soldiers during underbody blast (UBB) events. UBB events often produce large deformations of the floor and subsequent acceleration of the lower limb that are not sufficiently mitigated by the combat boot, leaving the calcaneus bone vulnerable to injury. Biomechanical experiments simulating UBB loading scenarios were conducted in a laboratory environment using isolated postmortem human subject (PMHS) leg components. Each leg component was tested twice: one sub-injurious test followed by a injury-targeted test. This enabled the use of interval censoring for each specimen in the survival statistical analysis to generate the human injury probability curves (HIPCs). Foot contact forces were measured in both the hindfoot and forefoot. Strains and acoustic emission signals at the calcaneus and distal tibia were utilized to determine injury timing. The footplate velocities of the injury tests ranged 8-13 m/s with time-to-peak velocity of 1.8-2.5 ms while the velocities of non-injury tests ranged from 4 to 6 m/s with the same time-to-peak. The majority of the injuries were severe calcaneus fractures (Sanders III-IV). Secondary injuries included fractures to the distal tibia, talus, cuboid and cuneiform. These injury outcomes were found to be consistent with those reported in UBB injury literature. The HIPCs for the severe calcaneus fracture were developed using the vertical heel contact force as the injury correlation measure through survival analysis statistical method in the form of lognormal function. This work represents the first set of HIPCs dedicated to the severe calcaneus fracture using the biomechanical force measurement closest to the injury location. This injury probability curve will enable biomechanical response validation of computational models, development of ATD injury assessment reference curve, and injury prediction capability for computational models or ATDs in the UBB environment.

Ultrafast thin-disk multipass amplifier with 720 mJ operating at kilohertz repetition rate for applications in atmospheric research.

We present an ultrafast thin-disk based multipass amplifier operating at a wavelength of 1030 nm, designed for atmospheric research in the framework of the Laser Lightning Rod project. The CPA system delivers a pulse energy of 720 mJ and a pulse duration of 920 fs at a repetition rate of 1 kHz. The 240 mJ seed pulses generated by a regenerative amplifier are amplified to the final energy in a multipass amplifier via four industrial thin-disk laser heads. The beam quality factor remains ∼ 2.1 at the output. First results on horizontal long-range filament generation are presented.

The Impact of Surgical Team Familiarity on Length of Procedure and Length of Stay: Inconsistent Relationships Across Procedures, Team Members, and Sites.

BACKGROUND: Team familiarity has been shown to be important for operative efficiency and number of complications, but it is unclear for which types of operations and for which team members familiarity matters the most. The objective of this study is to further our understanding of familiarity in the OR by quantifying the relative importance of familiarity among all possible core team dyads, and defining the impact of team level familiarity on outcomes. MATERIALS AND METHODS: Using a retrospective chart and administrative data review, five years of data from two health systems (14 hospitals) and across two procedures, (knee arthroplasty and lumbar laminectomy) were included. Multilevel modeling approach and a dominance analysis were conducted. RESULTS: For each previous surgery that any two members of the core surgical team had participated in together, the length of surgery decreased significantly. The familiarity of the scrub and the surgeon was the most significant relationship for knee arthroplasty across the two hospitals, and laminectomies at one hospital. CONCLUSIONS: The relationship between familiarity of the surgical team and surgical efficiency may be more complex than previously articulated. Familiarity may be more important for certain types of procedures. The familiarity of certain dyads may be more important for certain types of procedures.

HV discharges triggered by dual- and triple-frequency laser filaments.

We study the use of frequency upconversion schemes of near-IR picosecond laser pulses and compare their ability to guide and trigger electric discharges through filamentation in air. Upconversion, such as Second Harmonic Generation, is favorable for triggering electric discharges for given amount of available laser energy, even taking into account the losses inherent to frequency conversion. We focus on the practical question of optimizing the use of energy from a given available laser system and the potential advantage to use frequency conversion schemes.

Active pump-seed-pulse synchronization for OPCPA with sub-2-fs residual timing jitter: erratum.

In the original manuscript, a residual RMS timing jitter below 2 fs between pump and seed pulses in the stabilized case was claimed. Following a reevaluation of the data, this was underestimated. Due to a rounding error in the calibration routine, a miscalculated calibration factor was extracted. By using a higher precision, the updated residual timing jitter amounts to 2.76 fs, or sub-3 fs. In this erratum, the calibration routine is briefly reviewed and Fig. 4, which presents the timing jitter in the stabilized and unstabilized case, is updated. All other results remain unaffected.

Thin-disk pumped optical parametric chirped pulse amplifier delivering CEP-stable multi-mJ few-cycle pulses at 6 kHz.

We present an optical parametric chirped pulse amplifier (OPCPA) delivering CEP-stable ultrashort pulses with 7 fs, high energies of more than 1.8 mJ and high average output power exceeding 10 W at a repetition rate of 6 kHz. The system is pumped by a picosecond regenerative thin-disk amplifier and exhibits an excellent long-term stability. In a proof-of-principle experiment, high harmonic generation is demonstrated in neon up to the 61st order.

Mechanically induced bone formation is not sensitive to local osteocyte density in rat vertebral cancellous bone.

Osteocytes play an integral role in bone by sensing mechanical stimuli and releasing signaling factors that direct bone formation. The importance of osteocytes in mechanotransduction suggests that regions of bone tissue with greater osteocyte populations are more responsive to mechanical stimuli. To determine the effects of osteocyte population on bone functional adaptation we applied mechanical loads to the 8th caudal vertebra of skeletally mature female Sprague Dawley rats (6 months of age, n = 8 loaded, n = 8 sham controls). The distribution of tissue stress/strain within cancellous bone was determined using high-resolution finite element models, osteocyte distribution was determined using nano-computed tomography, and locations of bone formation were determined using three-dimensional images of fluorescent bone formation markers. Loading increased bone formation (3D MS/BS 10.82 ± 2.09% in loaded v. 3.17 ± 2.05% in sham control, mean ± SD). Bone formation occurred at regions of cancellous bone experiencing greater tissue stress/strain, however stress/strain was only a modest predictor of bone formation; even at locations of greatest stress/strain the probability of observing bone formation did not exceed 41%. The local osteocyte population was not correlated with locations of new bone formation. The findings support the idea that local tissue stress/strain influence the locations of bone formation in cancellous bone, but suggest that the size of the osteocyte population itself is not influential. We conclude that other aspects of osteocytes such as osteocyte connectivity, lacunocanilicular nano-geometry, and/or fluid pressure/shear distributions within the marrow space may be more influential in regulating bone mechanotransduction than the number of osteocytes. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:672-681, 2018.

1 kW, 200 mJ picosecond thin-disk laser system.

We report on a laser system based on thin-disk technology and chirped pulse amplification, providing output pulse energies of 200 mJ at a 5 kHz repetition rate. The amplifier contains a ring-type cavity and two thin Yb:YAG disks, each pumped by diode laser systems providing up to 3.5 kW power at a 969 nm wavelength. The average output power of more than 1 kW is delivered in an excellent output beam characterized by M2=1.1. The output pulses are compressed to 1.1 ps at full power with a pair of dielectric gratings.

Altered architecture and cell populations affect bone marrow mechanobiology in the osteoporotic human femur.

Age-related increases in trabecular bone porosity, as seen in osteoporosis, not only affect the strength and stiffness, but also potentially the mechanobiological response of bone. The mechanical interaction between trabecular bone and bone marrow is one source of mechanobiological signaling, as many cell populations in marrow are mechanosensitive. However, measuring the mechanics of this interaction is difficult, due to the length scales and geometric complexity of trabecular bone. In this study, a multi-scale computational scheme incorporating high-resolution, tissue-level, fluid-structure interaction simulations with discrete cell-level models was applied to characterize the potential effects of trabecular porosity and marrow composition on marrow mechanobiology in human femoral bone. First, four tissue-level models with different volume fractions (BV/TV) were subjected to cyclic compression to determine the continuum level shear stress in the marrow. The calculated stress was applied to three detailed models incorporating individual cells and having differing adipocyte fractions. At the tissue level, compression of the bone along its principal mechanical axis induced shear stress in the marrow ranging from 2.0 to 5.6 Pa, which increased with bone volume fraction and strain rate. The shear stress was amplified at the cell level, with over 90% of non-adipocyte cells experiencing higher shear stress than the applied tissue-level stress. The maximum shear stress decreased by 20% when the adipocyte volume fraction (AVF) increased from 30%, as seen in young healthy marrow, to 45 or 60% AVF typically found in osteoporotic patients. The results suggest that increasing AVF has similar effects on the mechanobiological signaling in bone marrow as decreased volume fraction.

Comparison of solid and fluid constitutive models of bone marrow during trabecular bone compression.

The mechanical environment and mechanobiology of bone marrow may play essential roles in bone adaptation, cancer metastasis, and immune cell regulation. However, the location of marrow within the trabecular pore space complicates experimental measurement of marrow mechanics. Computational models provide a means to assess the shear stress and pressure in the marrow during physiological loading, but they rely on accurate inputs for the marrow and the physics assumed for the interaction of bone and marrow. Elastic, viscoelastic, and fluid constitutive properties have all been reported from experimental measurements of marrow properties. It is unclear whether this ambiguity reflects the various length-scales, loading rates, and boundary conditions of the experiments, or if the material models are sufficiently similar as to be interchangeable. To address this question, we analyzed both the mean shear stress and its spatial distribution induced in marrow during compression of trabecular bone cubes when using linear elastic, neo-Hookean, viscoelastic, and power-law fluid constitutive models. Experimentally reported parameters were initially applied for all four constitutive models, resulting in poor agreement. The parameters of the soft solid models were calibrated by linear interpolation so that the volume averaged shear stress agreed with the fluid model for each, but this could only be accomplished on a specimen-by-specimen basis. Following calibration, the root-mean-squared (RMS) difference between the solid and fluid constitutive models was still greater than 26% even when the overall mean shear stress was in close agreement, indicating that the spatial distribution of stress is also sensitive to the constitutive model. As such, the choice of constitutive model should be backed by a strong rationale, and results should be interpreted with care.

Direct regenerative amplification of femtosecond pulses to the multimillijoule level.

We present a compact femtosecond nonlinear Yb:YAG thin-disk regenerative amplifier delivering pulses carried at a wavelength of 1030 nm with an average power of >200 W at a repetition rate of 100 kHz and an energy noise value of 0.46% (rms) in a beam with a propagation factor of M2<1.4. The amplifier is seeded with bandwidth-limited subpicosecond pulses without temporal stretching. We give estimates for the nonlinear parameters influencing the system and show that chirped mirrors compress the 2 mJ pulses to a near-bandwidth-limited duration of 210 fs.

Thin disk amplifier-based 40 mJ, 1 kHz, picosecond laser at 515 nm.

We report on a frequency-doubled picosecond Yb:YAG thin disk regenerative amplifier, developed as a pump laser for a kilohertz repetition rate OPCPA. At a repetition rate of 1 kHz, the compressed output of the regenerative amplifier has a pulse duration of 1.2 ps and pulse energy of 90 mJ with energy stability of σ < 0.8% and M2 < 1.2. The pulses are frequency doubled in an LBO crystal yielding 42 mJ at 515 nm.

Pressure and shear stress in trabecular bone marrow during whole bone loading.

Skeletal adaptation to mechanical loading is controlled by mechanobiological signaling. Osteocytes are highly responsive to applied strains, and are the key mechanosensory cells in bone. However, many cells residing in the marrow also respond to mechanical cues such as hydrostatic pressure and shear stress, and hence could play a role in skeletal adaptation. Trabecular bone encapsulates marrow, forming a poroelastic solid. According to the mechanical theory, deformation of the pores induces motion in the fluid-like marrow, resulting in pressure and velocity gradients. The latter results in shear stress acting between the components of the marrow. To characterize the mechanical environment of trabecular bone marrow in situ, pore pressure within the trabecular compartment of whole porcine femurs was measured with miniature pressure transducers during stress-relaxation and cyclic loading. Pressure gradients ranging from 0.013 to 0.46 kPa/mm were measured during loading. This range was consistent with calculated pressure gradients from continuum scale poroelastic models with the same permeability. Micro-scale computational fluid dynamics models created from computed tomography images were used to calculate the micromechanical stress in the marrow using the measured pressure differentials as boundary conditions. The volume averaged shear stress in the marrow ranged from 1.67 to 24.55 Pa during cyclic loading, which exceeds the mechanostimulatory threshold for mesenchymal lineage cells. Thus, the loading of bone through activities of daily living may be an essential component of bone marrow health and mechanobiology. Additional studies of cell-level interactions during loading in healthy and disease conditions will provide further incite into marrow mechanobiology.

CEP-stable, sub-6 fs, 300-kHz OPCPA system with more than 15 W of average power.

We report on a CEP-stable OPCPA system reaching multi-GW peak powers at 300 kHz repetition rate. It delivers 15 W of average power, over 50 µJ of compressed pulse energy and a pulse duration below 6 fs. By implementing an additional pump-seed-synchronization, the output parameters are stabilized over hours with power fluctuations of less than 1.5%.

The in situ mechanics of trabecular bone marrow: the potential for mechanobiological response.

Bone adapts to habitual loading through mechanobiological signaling. Osteocytes are the primary mechanical sensors in bone, upregulating osteogenic factors and downregulating osteoinhibitors, and recruiting osteoclasts to resorb bone in response to microdamage accumulation. However, most of the cell populations of the bone marrow niche,which are intimately involved with bone remodeling as the source of bone osteoblast and osteoclast progenitors, are also mechanosensitive. We hypothesized that the deformation of trabecular bone would impart mechanical stress within the entrapped bone marrow consistent with mechanostimulation of the constituent cells. Detailed fluid-structure interaction models of porcine femoral trabecular bone and bone marrow were created using tetrahedral finite element meshes. The marrow was allowed to flow freely within the bone pores, while the bone was compressed to 2000 or 3000 microstrain at the apparent level.Marrow properties were parametrically varied from a constant 400 mPas to a power law rule exceeding 85 Pas. Deformation generated almost no shear stress or pressure in the marrow for the low viscosity fluid, but exceeded 5 Pa when the higher viscosity models were used. The shear stress was higher when the strain rate increased and in higher volume fraction bone. The results demonstrate that cells within the trabecular bone marrow could be mechanically stimulated by bone deformation, depending on deformation rate, bone porosity, and bone marrow properties. Since the marrow contains many mechanosensitive cells, changes in the stimulatory levels may explain the alterations in bone marrow morphology with aging and disease, which may in turn affect the trabecular bone mechanobiology and adaptation.