ABSTRACT
In recent years, graphene field-effect-transistors (GFETs) have demonstrated an outstanding potential for terahertz (THz) photodetection due to their fast response and high-sensitivity. Such features are essential to enable emerging THz applications, including 6G wireless communications, quantum information, bioimaging and security. However, the overall performance of these photodetectors may be utterly compromised by the impact of internal resistances presented in the device, so-called access or parasitic resistances. In this work, we provide a detailed study of the influence of internal device resistances in the photoresponse of high-mobility dual-gate GFET detectors. Such dual-gate architectures allow us to fine tune (decrease) the internal resistance of the device by an order of magnitude and consequently demonstrate an improved responsivity and noise-equivalent-power values of the photodetector, respectively. Our results can be well understood by a series resistance model, as shown by the excellent agreement found between the experimental data and theoretical calculations. These findings are therefore relevant to understand and improve the overall performance of existing high-mobility graphene photodetectors.
ABSTRACT
An asymmetric dual-grating gate bilayer graphene-based field effect transistor (ADGG-GFET) with an integrated bowtie antenna was fabricated and its response as a Terahertz (THz) detector was experimentally investigated. The device was cooled down to 4.5 K, and excited at different frequencies (0.15, 0.3 and 0.6 THz) using a THz solid-state source. The integration of the bowtie antenna allowed to obtain a substantial increase in the photocurrent response (up to 8 nA) of the device at the three studied frequencies as compared to similar transistors lacking the integrated antenna (1 nA). The photocurrent increase was observed for all the studied values of the bias voltage applied to both the top and back gates. Besides the action of the antenna that helps the coupling of THz radiation to the transistor channel, the observed enhancement by nearly one order of magnitude of the photoresponse is also related to the modulation of the hole and electron concentration profiles inside the transistor channel by the bias voltages imposed to the top and back gates. The creation of local n and p regions leads to the formation of homojuctions (np, pn or pp+) along the channel that strongly affects the overall photoresponse of the detector. Additionally, the bias of both back and top gates could induce an opening of the gap of the bilayer graphene channel that would also contribute to the photocurrent.
ABSTRACT
We report on a novel implementation of the cryo-etching method, which enabled us to fabricate low-roughness hBN-encapsulated graphene nanoconstrictions with unprecedented control of the structure edges; the typical edge roughness is on the order of a few nanometers. We characterized the system by atomic force microscopy and used the measured parameters of the edge geometry in numerical simulations of the system conductance, which agree quantitatively with our low temperature transport measurements. The quality of our devices is confirmed by the observation of well defined quantized 2e2/h conductance steps at zero magnetic field. To the best of our knowledge, such an observation reports the clearest conductance quantization in physically etched graphene nanoconstrictions. The fabrication of such high quality systems and the scalability of the cryo-etching method opens a novel promising possibility of producing more complex truly-ballistic devices based on graphene.
ABSTRACT
Room temperature photovoltaic non-resonant detection by large area double-grating-gate InGaP/InGaAs/GaAs heterostructures was investigated in sub-THz range (0.24 THz). Semi-quantitative estimation of the characteristic detection length combined with self-consistent calculations of the electric fields excited in the structure by incoming terahertz radiation allowed us to interpret quantitatively the results and conclude that this detection takes place mainly in the regions of strong oscillating electric field excited in depleted portions of the channel.
Subject(s)
Radiometry/methods , Transistors, Electronic , Equipment Design , Equipment Failure Analysis , Pancreatitis-Associated Proteins , Radiation Dosage , Temperature , Terahertz RadiationABSTRACT
This paper reviews recent advances in our original 2D-plasmon-resonant terahertz emitters. The structure is based on a high-electron-mobility transistor and featured with doubly interdigitated grating gates. The dual grating gates can alternately modulate the 2D electron densities to periodically distribute the plasmonic cavities along the channel, acting as an antenna. The device can emit broadband terahertz radiation even at room temperature from self-oscillating 2D plasmons under the DC-biased conditions. When the device is subjected to laser illumination, photo-generated carriers stimulate the plasma oscillation, resulting in enhancement of the emission. The first sample was fabricated with standard GaAs-based heterostructure material systems, achieving room temperature terahertz emission. The second sample was fabricated in a double-decked HEMT structure in which the grating gate metal layer was replaced with the semiconducting upper-deck 2D electron layer, resulting in enhancement of emission by one order of magnitude.
