ABSTRACT
Carbon dots (CDs) have aroused colossal attention in the fabrication of nanocomposite membranes ascribed to their ultra-small size, good dispersibility, biocompatibility, excellent fluorescence, facile synthesis, and ease of functionalization. Their unique properties could significantly improve membrane performance, including permeance, selectivity, and antifouling ability. In this review, we summarized the recent development of CDs-based nanocomposite membranes in many application areas. Specifically, we paid attention to the structural regulation and functionalization of CDs-based nanocomposite membranes by CDs. Thus, a detailed discussion about the relationship between the CDs' properties and microstructures and the separation performance of the prepared membranes was presented, highlighting the advantages of CDs in designing high-performance separation membranes. In addition, the excellent optical and electric properties of CDs enable the nanocomposite membranes with multiple functions, which was also presented in this review.
ABSTRACT
Polyamide (PA) nanofiltration (NF) membranes suffer from biofouling, which will deteriorate their separation performance. In this study, we proposed a strategy to incorporate silver nanoparticles (Ag NPs) into PA NF membranes in situ, in order to simultaneously enhance water permeability and antibacterial performance. The chloride-doped carbon quantum dots (Cl-CQDs) with photocatalytic performance were pre-embedded in the PA selective layer. Under visible light irradiation, the photogenerated charge carriers generated by Cl-CQDs rapidly transported to silver ions (Ag+ ions), resulting in the in situ formation of Ag NPs. The proposed strategy avoided the problem of aggregating Ag NPs, and the amount of Ag NPs on the membrane surfaces could be easily tuned by changing silver nitrate (AgNO3) concentrations and immersion times. These uniformly dispersed Ag NPs increased membrane hydrophilicity. Thus, the obtained thin film nanocomposite Ag NPs (TFN-Ag) membrane exhibited an improved water flux (31.74 L m-2 h-1), which was ~2.98 times that of the pristine PA membrane; meanwhile, the sodium sulfate (Na2SO4) rejection rate was 96.11%. The sterilization rates of the TFN-Ag membrane against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were 99.55% and 99.52%, respectively. Thus, this facile strategy simultaneously improved the permeability and antibacterial property of PA NF membranes.
ABSTRACT
It is an urgent task to exploit effective antimicrobial agents due to the rise of drug-resistant pathogens. Herein, antimicrobial quaternized chitosan/Ag composite nanogels (QCS/Ag CNGs) with tunable properties were fabricated through inverse miniemulsion technique with a high encapsulation efficiency of NH2-Ag nanoparticles (NPs). The QCS/Ag CNGs possess superior broad-spectrum antimicrobial activity and low biotoxicity, via synergistic sterilization of Ag NPs and QCS. Furthermore, the NH2-Ag NPs were chemically linked to the QCS matrix through Schiff base reactions, and the QCS/Ag CNGs have reactive groups, making it possible to obtain durable antibacterial cotton fabrics. Thus, QCS/Ag CNGs modified cotton fabrics exhibited laundering durability of antimicrobial effect after 100 washing cycles without sacrificing other inherent properties of cotton fabrics. Our study provides a facile and controllable method to construct polymer/inorganic CNGs to address the urgent need for antibacterial agents/fabrics.
Subject(s)
Anti-Bacterial Agents/pharmacology , Chitosan/pharmacology , Cotton Fiber , Metal Nanoparticles/chemistry , Nanogels/chemistry , Silver/pharmacology , Anti-Bacterial Agents/chemical synthesis , Anti-Bacterial Agents/chemistry , Candida albicans/drug effects , Carbohydrate Conformation , Chitosan/chemistry , Emulsions , Escherichia coli/drug effects , Microbial Sensitivity Tests , Silver/chemistry , Staphylococcus aureus/drug effectsABSTRACT
Dynamic color-tunable fluorescent materials are sought-after materials in many applications. Here, we report a polymeric matrix-regulated fluorescence strategy via synergistically modulating aggregation-induced emission (AIE) properties and the Förster resonance energy transfer (FRET) process, which leads to tunable dynamic variation of color and photoluminescence (PL) intensity of fluorescent polymeric nanoparticles (FRET-PNPs) driven by photoirradiation. The FRET-PNPs were prepared via a facile one-pot miniemulsion copolymerization with the tetraphenyletheyl (TPE) and spiropyran (SP) units chemically bonded to the polymer matrix. The FRET-PNPs exhibited dynamic variation of fluorescence properties (colors and PL intensity) under photoirradiation on the timescale of minutes. The variation of the polymer matrix composition could deliberately influence the AIE property of TPE units and the isomerization process of SP to merocyanine units, which further affect the FRET efficiency of FRET-PNPs and, eventually, lead to versatile dynamic fluorescence variation. The dynamic fluorescence property as well as the excellent processability and film formation ability of FRET-PNPs allowed for diverse applications, such as warning labels, dynamic decorative painting, and multiple information encryption. Without sophisticated molecular design or tedious preparation processes, a new perspective for the design, fabrication, and performance optimization of fluorescent nanomaterials for innovative applications was proposed.
ABSTRACT
The poor dispensability of pristine carbon nanotubes in water impedes their implications in thin-film nanocomposite membranes for crucial utilities such as water purification. In this work, high-flux positively charged nanocomposite nanofiltration membranes were exploited by uniformly embedding poly(dopamine) modified multiwall carbon nanotubes (PDA-MWCNTs) in polyamide thin-film composite membranes. With poly(dopamine) modification, fine dispersion of MWCNTs in polyethyleneimine (PEI) aqueous solutions was achieved, which was interracially polymerized with trimesoyl chloride (TMC) n-hexane solutions to prepare nanocomposite membranes. The compatibility and interactions between modified MWCNTs and polyamide matrix were enhanced, attributed to the poly(dopamine) coatings on MWCNT surfaces, leading to significantly improved water permeability. At optimized conditions, pure water permeability of the PEI/PDA-MWCNTs/TMC nanofiltration membrane (M-4) was 15.32 L m(-2) h(-1) bar(-1), which was â¼1.6 times increased compared with that of pristine PEI/TMC membranes. Salt rejection of M-4 to different multivalent cations decreased in the sequence ZnCl2 (93.0%) > MgCl2 (91.5%) > CuCl2 (90.5%) ≈ CaCl2, which is well-suited for water softening and heavy metal ion removal.