ABSTRACT
Sensors based on irregularly shaped bent optical fiber devices have attracted considerable interest in many applications. However, the effective interference length and bent radius of the irregular shape fiber have not been given accurately. Here an equivalent arc model is proposed to define the effective interference length and bent radius of the U-shaped fiber device: the U-shaped optical fiber is equivalent to a regular arc. We found that the effective interference length of devices varies greatly with the structure's height changes in some special structure sizes, which is highly useful for micro-displacement measurement. In terms of this model, an ultra-sensitive micro-displacement sensor of -1.2838nm/µm in a measurement range of 0-60 µm has been realized. The sensitivity of this device is one order of magnitude higher than that in any previously reported bent optical fiber work. More importantly, the analysis strategy of the equivalent arc model can be generalized to various irregular bent fiber micro-displacement sensors and other sensing fields.
ABSTRACT
A rotation angle measurement method based on self-mixing interference (SMI) of a fiber laser is proposed. The rotation angle can be calculated indirectly by the displacement measured by SMI. In the experiment, a linear cavity fiber laser with simple structure and high flexibility is used as the optical source for measuring the deflection angle. To improve the measurement accuracy, the SMI signal is filtered by the variational mode decomposition (VMD) algorithm. The filtered SMI signal is normalized by Hilbert transform. The even-power algorithm is used to subdivide the interference fringes, so as to improve the measurement resolution. The experimental result shows that the measurement error of angular shift is less than 1% in the range of 10°.
ABSTRACT
An optofluidic system based on photothermal spectroscopy is proposed, which combines molecular photothermal effect with Nb2CTx MXene-tilted fiber Bragg grating (TFBG) for the detection of organophosphorus pesticides (OPs) with temperature compensated. Under the irradiation of excitation light, the photothermal effect of OPs produces a detectable change in the refractive index of the sample, and the concentration of chlorpyrifos can be quantified using TFBG. The Nb2CTx MXene coated TFBG allow more molecules to be absorbed on the surface of TFBG, which enhances the interaction between light and matter, and improves the sensitivity of detection. The temperature compensation is performed by referring to the core mode of TFBG, thereby eliminating the influence of ambient temperature on the photothermal detection. The experimental results show that the sensitivity reaches 1.8 pm/ppm with a limit of detection (LOD) of 0.35 ppm, and the obtained temperature compensation coefficient is 4.84 ppm/°C. This photothermal biosensor has the advantages of low LOD, temperature compensation and real-time online monitoring, making it a good candidate in medicine, chemistry and environmental monitoring.
ABSTRACT
An enhanced photothermal signal detection method based on graphene oxide (GO) integrated long period fiber grating (LPFG) for on-site sodium copper chlorophyllin (SCC) quantification is proposed. SCC, as a porphyrin compound, can be photonically excited to induce a stronger photothermal effect. GO offers superior molecular adsorption and thermal conductivity properties; depositing it on the LPFG surface significantly improves the sensitivity and detection efficiency of the SCC photothermal signal, when irradiated with a 405 nm laser. The experimental results showed improved performance compared with those from uncoated LPFG, with a sensitivity of 0.0587 dB (mg L-1)-1 and a limit of detection (LOD) of 0.17 mg kg-1, which is also an order of magnitude lower than that of traditional high-performance liquid chromatography. The proposed method has potential applications in the fields of real-time food safety monitoring, environmental pollutant detection, and disease diagnosis.
ABSTRACT
An optical sensor that simultaneously measures the concentration of the biochemical oxygen demand (BOD) and temperature in water based on a tapered microfiber is proposed for environmental monitoring. The sensor is characterized by a strong evanescent field, which is more sensitive to liquids with a low refractive index and a low transmission loss. The results show that as the BOD concentration increases, the interference spectrum shifts toward longer wavelengths, the spectral loss decreases, and the sensitivities of the BOD are 12.17 nm/mg/mL and -2.387dB/mg/mL in the range of 0.25-1 mg/mL, which indicates the extent of the water pollution. The detection limit for the BOD concentration is as low as 0.0016 mg/mL. As the ambient temperature increases, the interference spectrum shifts toward shorter wavelengths, the spectral loss decreases, and the temperature sensitivities are -0.339nm/∘C and -0.031dB/∘C in the range of 30°C-60°C. The matrix method can be used to achieve the simultaneous measurement of the BOD concentration and environmental temperature because the spectral interference peaks have different responses to these two parameters. The sensor can not only be used for detecting water pollution in rivers, drinking water, and groundwater but can also be utilized for other types of environmental monitoring. This sensor has great potential to act as a basic sensing unit in fiber-optic sensor networks for multiparameter measurements and intelligent monitoring.
Subject(s)
Fiber Optic Technology/instrumentation , Fiber Optic Technology/methods , Water Pollution/analysis , Bacteria , Biosensing Techniques , Environmental Monitoring , Limit of Detection , Models, Chemical , Optical Fibers , Oxygen Consumption , TemperatureABSTRACT
An optical fiber magnetic field sensor based on serial-tilted-tapered fiber (STTF) integrated with magnetic fluid is proposed. The compact STTF structure consists of two closely tilted-tapered fibers with a length of approximately 836 µm, which results in stronger mode coupling. The transmission characteristics of the proposed sensor under different magnetic field intensities (MFIs) have been studied. The results show that the proposed structure has an outstanding response to MFI and that the highest sensitivity is 32.67 pm/Oe in wavelength and 0.0336 dB/Oe in transmission in the range of 0-75 Oe. The minimum resolution of the proposed sensor is up to 0.6734 Oe. These types of sensors have great potential application in weak magnetic field measurements due to their compact structure and good sensing performance.
ABSTRACT
The measurement of chloride ion concentrations has been studied for the purpose of monitoring the quality of water resources. In this paper, a chloride ion sensor based on a microfiber coupler with a Sagnac loop is proposed. The microfiber coupler, which acts as the sensing unit and has a diameter of 10 µm and a length of 1 mm, is fabricated using the flame-brushing technique, and the two ends are connected to form a Sagnac loop, which acts as a reflector to enhance the reflection in the structure. Experimental results show that the sensitivity reaches a maximum of 423 pm/ and that the detection limit for the chloride ion concentration is 0.447 at a wavelength of 1595 nm. The proposed sensor is characterized by a simple and easy manufacturing process, compact structure, and low cost; further, this sensing unit has great potential for applications in marine chloride detection and environmental safety monitoring, especially for monitoring building corrosion and water pollution.
ABSTRACT
Optical fiber microfluidics technology can implement the mutual tune of the light field and fluid in micro-nano scale. In this paper, one core of high-birefringence photonic crystal fiber (Hi-Bi PCF) is used as a microfluidic channel. The birefringence of Fe3O4 nanofluid is experimentally and theoretically investigated by selectively infiltrating the magnetic fluid into the core of the Hi-Bi PCF. The presence of magnetic fluid alters the birefringence of the original Hi-Bi PCF and can be modulated by the intensity of the external magnetic field. The optical field distribution is simulated, and the birefringence of the Hi-Bi PCF with selective filling is approximately 6.672×10-4. The experimental results show that the structure has a highly linear response to the external magnetic field from 0 Oe to 300 Oe, and the sensitivity is 16.8 pm/Oe with a high resolution of 1.19 Oe. Due to several advantages such as all-fiber compact structure, low transmission loss, and high linear response, this device can find various applications, including weak magnetic field measurement with high accuracy, optical fiber gyroscopes, and magneto-optic modulators. Particularly, it also has important significance to realize the all-fiber microfluidic chip laboratory.
ABSTRACT
A Janus MoSSe monolayer, synthesized recently though the chemical vapor deposition method [A. Y. Lu, H. Zhu, J. Xiao, C. P. Chuu, Y. Han, M. H. Chiu, C. C. Cheng, C. W. Yang, K. H. Wei Y. Yang, Y. Wang, D. Sokaras, D. Nordlund, P. Yang, D. A. Muller, M. Y. Chou, X. Zhang and L. J. Li, Nat. Nanotechnol., 2017, 12, 744-749], has drawn considerable attention as a new two-dimensional (2D) material owing to its fascinating electronic and optical properties. In this study, based on first-principles calculations, we systematically explore for the first time the performance of Janus MoSSe monolayers as a channel material contacting with graphene to form van der Waals (vdW) heterostructures. Our calculations show that the intrinsic electronic properties of both the graphene and MoSSe monolayer are preserved well in our proposed two graphene/MoSSe heterostructures (i.e. G/SMoSe and G/SeMoS heterostructures), and n-type Schottky contacts with a small Schottky barrier height (SBH) are formed at their respective interfaces. An analytical model is presented for the barrier heights. Moreover, the n-type Schottky barrier at the G/SMoSe heterostructure interface can be reduced by increasing the interlayer distance and can even be changed to an Ohmic contact by applying a negative electric field. More interestingly, varying the interlayer distance or applying an external electric field can effectively modulate the Schottky barrier and the Schottky contact (n-type and p-type) of the G/SeMoS heterostructure interface. These theoretical findings not only provide insights into the fundamental properties of the graphene/MoSSe interfaces but also open the possibility of designing high-performance field-effect transistors (FETs) based on the graphene/MoSSe heterostructures.
ABSTRACT
Light-gas interaction can be enhanced by using disordered porous materials because multiple random scattering increases light intensity near the surface of the material. Here we report signal enhancement of photoacoustic gas spectroscopy with disordered porous ceramics. The amplitude and frequency characteristics of photoacoustic signal due to gas absorption in disordered materials are modeled theoretically. Experiment with a porous Al2O3 sample demonstrates photoacoustic signal enhancement of â¼4 times at 5 kHz.
ABSTRACT
We propose an optical fiber sensor for low refractive index (RI) based on a serial-tilted-tapered fiber (STTF), which can be considered as two tightly concatenated micro Mach-Zehnder interferometers (MZIs). The STTF has a compact length of 959.8 µm, and can realize point detection and sensing in limited space. Numerical simulations reveal that a significantly strong evanescent field occurs around the STTF, making it to have the high sensitivity for surrounding RI. In the experiments, the interference dips show the nonlinear wavelength and intensity responses with increasing RI from 1.3395 to 1.3538. In the RI range of 1.3532~1.3538, the RI sensitivities reach the highest value of 2300 nm/RIU and -16183.33 dB/RIU. Moreover, the transmission spectrum of the STTF is low sensitive to temperature. These results indicate that our proposed sensor can be an appropriate candidate in most chemical and biological applications.
ABSTRACT
Two-dimensional (2D) materials play more and more important roles these days, due to their broad applications in many areas. Herein, we propose an optically-pumped terahertz (THz) modulator, based on Si-grown MoS2 nanosheets. The broadband modulation effect has been proved by THz time domain spectroscopy and numerical simulation. The modulation depth of this Si-grown MoS2 nanosheet can reach over 75% under the low pumping power of 0.24 W cm(-2), much deeper than that of bare silicon. By theoretical models and simulation, it is proved that the broadband modulation effect can be described as a free carrier absorption for THz waves in the Drude form. Importantly, by a catalyst mechanism in the Si-grown MoS2, it is concluded that the MoS2-Si heterostructure enables the MoS2 to catalyze more carriers generated on the Si surface. This novel 2D material has a high effective modulation on THz waves under a low pumping power density, which affords it a promising potential in THz applications.
ABSTRACT
A thin-core-fiber excited photonic crystal fiber modal interferometer has been proposed and experimentally demonstrated. By employing a thin-core fiber as the mode exciter, both of the core and cladding modes propagate in the photonic crystal fiber and interfere with each other. The experimental results show that the transmission dips corresponding to different-order modes have various strain responses with opposite shift directions. The strain sensitivity could be improved to 58.57 pm/µÎµ for the applied strain from 0 to 491 µÎµ by utilizing the wavelength interval between the dips with opposite shift directions. Moreover, due to the pure silica property of the employed photonic crystal fiber, the proposed fiber modal interferometer exhibits a low-temperature sensitivity of about 0.56 pm/°C within a temperature range from 26.4°C (room temperature) to 70°C. Additionally, the proposed fiber modal interferometer has several advantages, such as good stability, compact structure, and simple fabrication. Therefore, it is more applicable for strain measurement with reducing temperature cross-sensitivity.
Subject(s)
Fiber Optic Technology/instrumentation , Interferometry/instrumentation , Optical Fibers , Refractometry/instrumentation , Crystallization , Equipment Design , Equipment Failure Analysis , Photons , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
Large-area and highly crystalline monolayer molybdenum disulfide (MoS2) with a tunable grain size was synthesized in a H2 atmosphere. The influence of introduced H2 on MoS2 growth and grain size, as well as the corresponding mechanism, was tentatively explored by controlling the H2 flow rate. The as-grown monolayer MoS2 displays excellent uniformity and high crystallinity evidenced by Raman and high-resolution transmission electron microscopy. The Raman results also give an indication that the quality of the monolayer MoS2 synthesized in a H2 atmosphere is comparable to that synthesized by using seed or mechanical exfoliation. In addition, the electronic properties and dielectric inhomogeneity of MoS2 monolayers were also detected in situ via scanning microwave microscopy, with measurements on impedance and differential capacitance (dC/dV). Back-gated field-effect transistors based on highly crystalline monolayer MoS2 shows a field-effect mobility of â¼13.07 cm2 V(-1) s(-1) and an Ion/Ioff ratio of â¼1.1×10(7), indicating that the synthesis of large-area and high-quality monolayer MoS2 with H2 is a viable method for electronic and optoelectronic applications.
ABSTRACT
A compact fiber-optic magnetic-field sensor based on tapered all-solid waveguide-array fiber (WAF) and magnetic fluid (MF) has been proposed and experimentally demonstrated. The tapered all-solid WAF is fabricated by using a fusion splicer, and the sensor is formed by immersing the tapered all-solid WAF into the MF. The transmission spectra have been measured and analyzed under different magnetic-field intensities. Experimental results show that the acquired magnetic-field sensitivity is 44.57 pm/Oe for a linear magnetic-field intensity range from 50 to 200 Oe. All-solid WAF has very similar thermal expansion coefficient for high- and low-refractive-index glasses, so mode profile is not affected by thermal drifts. Also, magnetically induced refractive-index changes into the ferrofluid are of the order of â¼5×10(-2), while the corresponding thermally induced refractive-index changes into the ferrofluid are expected to be lower. The temperature response has also been detected, and the temperature-induced wavelength shift perturbation is less than 0.3 nm from temperature of 26.9°C-44°C. The proposed magnetic-field sensor has such advantages as low temperature sensitivity, simple structure, and ease of fabrication. It also indicates that the magnetic-field sensor based on tapered all-solid WAF and MF is helpful to reduce temperature cross-sensitivity for the measurement of magnetic field.
ABSTRACT
A highly sensitive optical fiber twist sensor has been proposed by employing a Sagnac interferometer based on polarization-maintaining elliptical core fibers (PM-ECFs). The twist effects have been theoretically analyzed and experimentally demonstrated. Based on the photoelastic effect, the resonance wavelength linearly shifts with the increment of twist and the wavelength shift is also dependent on the torsion direction. The maximum torsion sensitivities reach 18.60nm/(rad/m) for clockwise (CW) torsion direction and 15.83nm/(rad/m) for anticlockwise (ACW) torsion direction, respectively. To eliminate the temperature cross-sensitivity effect, a sensor matrix for simultaneous measurement of twist and temperature has also been obtained. Moreover, theoretical and experimental investigations indicate that by optimizing the refractive index difference between the core and cladding, core ellipticity and cladding diameter, the twist sensitivity could be further improved.
ABSTRACT
In this paper, a magnetically controllable wavelength-division-multiplexing (WDM) fiber coupler has been proposed and experimentally demonstrated. A theoretical model has been established to analyze the influences of the weak as well as strong couplings to the wavelength tunability of this coupler. Experimental results show that the operation wavelength tunability of the proposed WDM coupler could be fulfilled for an applied magnetic field intensity range of 0 Oe to 500 Oe, and particularly it possesses high operation performances within the magnetic field intensity ranging from 25 Oe to 125 Oe when additional transmission loss and isolation are both considered. Within this range, the two selected channels show the wavelength tunability of 0.05 nm/Oe and 0.0744 nm/Oe, respectively, and the isolation between the two branches is higher than 24.089 dB. Owing to its high isolation, good splitting ratio stability, and high wavelength tunability, the proposed controllable WDM coupler is anticipated to find potential applications in such fields as fiber laser, fiber sensing and fiber-optic communications. Moreover, the fiber coupler integrated with the magnetic fluid would be valuable for the design of magnetically controllable mode-division-multiplexing devices.
ABSTRACT
In this paper, a multimodal interferometer based on the liquid-filled photonic crystal fiber (PCF) has been proposed and experimentally demonstrated for simultaneous measurement of temperature and force. Experimental results show that different spectral minima have distinctive sensitivities to the temperature and force. The proposed interferometer shows the temperature sensitivities of -9.214 nm/°C, -24.757 nm/°C, and -12.543/°C and the force sensitivities of 0 nm/N, 4.978 nm/N, and 0 nm/N, respectively, for the three selected spectral minima. The sensing matrices are thus established and simultaneous measurement of temperature and force has been experimentally demonstrated. The proposed liquid-filled PCF-based multimodal interferometer would find potential applications in multiple-parameter sensing owing to its high sensitivity, compactness, ease of fabrication, and low cost.
ABSTRACT
A temperature-insensitive optical fiber refractometer, based on multimode interference in no-core square fibers, has been proposed and experimentally demonstrated. The refractometer is formed by a single-mode fiber sandwiched between two segments of no-core square fibers through cleaving and fusion splicing. The transmission spectra characteristic of refractive index (RI) and environmental temperature have been investigated. Experimental results show that a transmission dip exhibits a redshift as large as about 25 nm when the ambient RI increases from 1.3424 to 1.4334. Within the RI range of 1.4033 to 1.4334, the RI sensitivity reaches 474.8189 nm/RIU. A temperature sensitivity of 0.00639 nm/°C is experimentally acquired between 20°C and 85°C, showing a low temperature cross-sensitivity of about 1.35×10â»5 RIU/°C. The proposed refractometer has several advantages, such as low cost, simple structure, and compact size. Therefore, it is also expected to be employed in chemical and multi-parameter sensing applications.
ABSTRACT
The dielectric property and magneto-optical effects of ferrofluids have been investigated in the terahertz (THz) regime by using THz time-domain spectroscopy. The experiment results show that the refractive index and absorption coefficient of ferrofluid for THz waves rise up with the increase of nanoparticle concentration in the ferrofluid. Moreover, two different THz magneto-optical effects have been found with different external magnetic fields, of which mechanisms have been theoretically explained well by microscopic structure induced refractive index change in the magnetization process and the transverse magneto-optical effect after the saturation magnetization, respectively. This work suggests that ferrofluid is a promising magneto-optical material in the THz regime which has widely potential applications in THz functional devices for THz sensing, modulation, phase retardation, and polarization control.