Laue microdiffraction on polycrystalline samples above 1500†K achieved with the QMAX-µLaue furnace.

X-ray Laue microdiffraction aims to characterize microstructural and mechanical fields in polycrystalline specimens at the sub-micrometre scale with a strain resolution of ∼10-4. Here, a new and unique Laue microdiffraction setup and alignment procedure is presented, allowing measurements at temperatures as high as 1500 K, with the objective to extend the technique for the study of crystalline phase transitions and associated strain-field evolution that occur at high temperatures. A method is provided to measure the real temperature encountered by the specimen, which can be critical for precise phase-transition studies, as well as a strategy to calibrate the setup geometry to account for the sample and furnace dilation using a standard α-alumina single crystal. A first application to phase transitions in a polycrystalline specimen of pure zirconia is provided as an illustrative example.

CNN-Based Laue Spot Morphology Predictor for Reliable Crystallographic Descriptor Estimation.

Laue microdiffraction is an X-ray diffraction technique that allows for the non-destructive acquisition of spatial maps of crystallographic orientation and the strain state of (poly)crystalline specimens. To do so, diffraction patterns, consisting of thousands of Laue spots, are collected and analyzed at each location of the spatial maps. Each spot of these so-called Laue patterns has to be accurately characterized with respect to its position, size and shape for subsequent analyses including indexing and strain analysis. In the present paper, several approaches for estimating these descriptors that have been proposed in the literature, such as methods based on image moments or function fitting, are reviewed. However, with the increasing size and quantity of Laue image data measured at synchrotron sources, some datasets become unfeasible in terms of computational requirements. Moreover, for irregular Laue spots resulting, e.g., from overlaps and extended crystal defects, the exact shape and, more importantly, the position are ill-defined. To tackle these shortcomings, a procedure using convolutional neural networks is presented, allowing for a significant acceleration of the characterization of Laue spots, while simultaneously estimating the quality of a Laue spot for further analyses. When tested on unseen Laue spots, this approach led to an acceleration of 77 times using a GPU while maintaining high levels of accuracy.

LaueNN: neural-network-based hkl recognition of Laue spots and its application to polycrystalline materials.

A feed-forward neural-network-based model is presented to index, in real time, the diffraction spots recorded during synchrotron X-ray Laue microdiffraction experiments. Data dimensionality reduction is applied to extract physical 1D features from the 2D X-ray diffraction Laue images, thereby making it possible to train a neural network on the fly for any crystal system. The capabilities of the LaueNN model are illustrated through three examples: a two-phase nano-structure, a textured high-symmetry specimen deformed in situ and a polycrystalline low-symmetry material. This work provides a novel way to efficiently index Laue spots in simple and complex recorded images in <1 s, thereby opening up avenues for the realization of real-time analysis of synchrotron Laue diffraction data.

Grain Structure Engineering of NiTi Shape Memory Alloys by Intensive Plastic Deformation.

To explore an effective route of customizing the superelasticity (SE) of NiTi shape memory alloys via modifying the grain structure, binary Ni55Ti45 (wt) alloys were fabricated in as-cast, hot swaged, and hot-rolled conditions, presenting contrasting grain sizes and grain boundary types. In situ synchrotron X-ray Laue microdiffraction and in situ synchrotron X-ray powder diffraction techniques were employed to unravel the underlying grain structure mechanisms that cause the diversity of SE performance among the three materials. The evolution of lattice rotation, strain field, and phase transformation has been revealed at the micro- and mesoscale, and the effect of grain structure on SE performance has been quantified. It was found that (i) the Ni4Ti3 and NiTi2 precipitates are similar among the three materials in terms of morphology, size, and orientation distribution; (ii) phase transformation happens preferentially near high-angle grain boundary (HAGB) yet randomly in low-angle grain boundary (LAGB) structures; (iii) the smaller the grain size, the higher the phase transformation nucleation kinetics, and the lower the propagation kinetics; (iv) stress concentration happens near HAGBs, while no obvious stress concentration can be observed in the LAGB grain structure during loading; (v) the statistical distribution of strain in the three materials becomes asymmetric during loading; (vi) three grain lattice rotation modes are identified and termed for the first time, namely, multi-extension rotation, rigid rotation, and nondispersive rotation; and (vii) the texture evolution of B2 austenite and B19' martensite is not strongly dependent on the grain structure.

Twin boundary migration in an individual platinum nanocrystal during catalytic CO oxidation.

At the nanoscale, elastic strain and crystal defects largely influence the properties and functionalities of materials. The ability to predict the structural evolution of catalytic nanocrystals during the reaction is of primary importance for catalyst design. However, to date, imaging and characterising the structure of defects inside a nanocrystal in three-dimensions and in situ during reaction has remained a challenge. We report here an unusual twin boundary migration process in a single platinum nanoparticle during CO oxidation using Bragg coherent diffraction imaging as the characterisation tool. Density functional theory calculations show that twin migration can be correlated with the relative change in the interfacial energies of the free surfaces exposed to CO. The x-ray technique also reveals particle reshaping during the reaction. In situ and non-invasive structural characterisation of defects during reaction opens new avenues for understanding defect behaviour in confined crystals and paves the way for strain and defect engineering.

Grain boundary formation through particle detachment during coarsening of nanoporous metals.

Grain boundary formation during coarsening of nanoporous gold (NPG) is investigated wherein a nanocrystalline structure can form by particles detaching and reattaching to the structure. MicroLaue and electron backscatter diffraction measurements demonstrate that an in-grain orientation spread develops as NPG is coarsened. The volume fraction of the NPG sample is near the limit of bicontinuity, at which simulations predict that a bicontinuous structure begins to fragment into independent particles during coarsening. Phase-field simulations of coarsening using a computationally generated structure with a volume fraction near the limit of bicontinuity are used to model particle detachment rates. This model is tested by using the measured NPG structure as an initial condition in the phase-field simulations. We predict that up to ∼5% of the NPG structure detaches as a dealloyed [Formula: see text] sample is annealed at 300 °C for 420 min. The quantity of volume detached is found to be highly dependent on the volume fraction and volume fraction homogeneity of the nanostructure. As the void phase in the experiments cannot support independent particles, they must fall and reattach to the structure, a process that results in the formation of new grain boundaries. This particle reattachment process, along with other classic processes, leads to the formation of grain boundaries during coarsening in nanoporous metals. The formation of grain boundaries can impact a variety of applications, including mechanical strengthening; thus, the consideration and understanding of particle detachment phenomena are essential when studying nanoporous metals.

Operando Raman Spectroscopy and Synchrotron X-ray Diffraction of Lithiation/Delithiation in Silicon Nanoparticle Anodes.

Operando Raman spectroscopy and synchrotron X-ray diffraction were combined to probe the evolution of strain in Li-ion battery anodes made of crystalline silicon nanoparticles. The internal structure of the nanoparticles during two discharge/charge cycles was evaluated by analyzing the intensity and position of Si diffraction peaks and Raman TO-LO phonons. Lithiation/delithiation of the silicon under limited capacity conditions triggers the formation of "crystalline core-amorphous shell" particles, which we evidenced as a stepwise decrease in core size, as well as sequences of compressive/tensile strain due to the stress applied by the shell. In particular, we showed that different sequences occur in the first and the second cycle, due to different lithiation processes. We further evidenced critical experimental conditions for accurate operando Raman spectroscopy measurements due to the different heat conductivity of lithiated and delithiated Si. Values of the stress extracted from both operando XRD and Raman are in excellent agreement. Long-term ex situ measurements confirmed the continuous increase of the internal compressive strain, unfavorable to the Si lithiation and contributing to the capacity fading. Finally, a simple mechanical model was used to estimate the sub-nanometer thickness of the interfacial shell applying the stress on the crystalline core. Our complete operando diagnosis of the strain and stress in SiNPs provides both a detailed scenario of the mechanical consequences of lithiation/delithiation in SiNP and also experimental values that are much needed for the benchmarking of theoretical models and for the further rational design of SiNP-based electrodes.

The effect of size on the strength of FCC metals at elevated temperatures: annealed copper.

As the length scale of sample dimensions is reduced to the micron and sub-micron scales, the strength of various materials has been observed to increase with decreasing size, a fact commonly referred to as the 'sample size effect'. In this work, the influence of temperature on the sample size effect in copper is investigated using in situ microcompression testing at 25, 200 and 400 °C in the SEM on vacuum-annealed copper structures, and the resulting deformed structures were analysed using X-ray µLaue diffraction and scanning electron microscopy. For pillars with sizes between 0.4 and 4 µm, the size effect was measured to be constant with temperature, within the measurement precision, up to half of the melting point of copper. It is expected that the size effect will remain constant with temperature until diffusion-controlled dislocation motion becomes significant at higher temperatures and/or lower strain rates. Furthermore, the annealing treatment of the copper micropillars produced structures which yielded at stresses three times greater than their un-annealed, FIB-machined counterparts.

In situ bending of an Au nanowire monitored by micro Laue diffraction.

This article reports on the first successful combination of micro Laue (µLaue) diffraction with an atomic force microscope for in situ nanomechanical tests of individual nanostructures. In situ three-point bending on self-suspended gold nanowires was performed on the BM32 beamline at the ESRF using a specially designed atomic force microscope. During the bending process of the self-suspended wire, the evolution of µLaue diffraction patterns was monitored, allowing for extraction of the bending angle of the nanowire. This bending compares well with finite element analysis taking into account elastic constant bulk values and geometric nonlinearities. This novel experimental setup opens promising perspectives for studying mechanical properties at the nanoscale.

X-ray micro Laue diffraction tomography analysis of a solid oxide fuel cell.

The relevance of micro Laue diffraction tomography (µ-LT) to investigate heterogeneous polycrystalline materials has been studied. For this purpose, a multiphase solid oxide fuel cell (SOFC) electrode composite made of yttria-stabilized zirconia and nickel oxide phases, with grains of about a few micrometres in size, has been analyzed. In order to calibrate the Laue data and to test the technique's sensitivity limits, a monocrystalline germanium sample of about 8 × 4 µm in cross-section size has also been studied through µ-LT. The SOFC and germanium Laue diffraction pattern analyses are compared and discussed. The indexing procedure has been successfully applied for the analysis of the germanium Laue data, and the depth-resolved two-dimensional cartographies of the full deviatoric strain tensor components were obtained. The development and application of an original geometrical approach to analyze the SOFC Laue data allowed the authors to resolve grains with sizes of about 3 µm and to identify their individual Laue patterns; by indexing those Laue patterns, the crystalline phases and orientations of most of the grains identified through the geometrical approach could be resolved.

A tunable multicolour 'rainbow' filter for improved stress and dislocation density field mapping in polycrystals using X-ray Laue microdiffraction.

White-beam X-ray Laue microdiffraction allows fast mapping of crystal orientation and strain fields in polycrystals, with a submicron spatial resolution in two dimensions. In the well crystallized parts of the grains, the analysis of Laue-spot positions provides the local deviatoric strain tensor. The hydrostatic part of the strain tensor may also be obtained, at the cost of a longer measuring time, by measuring the energy profiles of the Laue spots using a variable-energy monochromatic beam. A new `rainbow' method is presented, which allows measurement of the energy profiles of the Laue spots while remaining in the white-beam mode. It offers mostly the same information as the latter monochromatic method, but with two advantages: (i) the simultaneous measurement of the energy profiles and the Laue pattern; (ii) rapid access to energy profiles of a larger number of spots, for equivalent scans on the angle of the optical element. The method proceeds in the opposite way compared to a monochromator-based method, by simultaneously removing several sharp energy bands from the incident beam, instead of selecting a single one. It uses a diamond single crystal placed upstream of the sample. Each Laue diffraction by diamond lattice planes attenuates the corresponding energy in the incident spectrum. By rotating the crystal, the filtered-out energies can be varied in a controlled manner, allowing one to determine the extinction energies of several Laue spots of the studied sample. The energies filtered out by the diamond crystal are obtained by measuring its Laue pattern with another two-dimensional detector, at each rotation step. This article demonstrates the feasibility of the method and its validation through the measurement of a known lattice parameter.

Unexpected stability of phospholipid langmuir monolayers deposited on Triton X-100 aqueous solutions.

We studied at the molecular level the interaction between neutral detergent Triton X-100 aqueous solution and a phospholipid Langmuir monolayer deposited on top using surface pressure measurement and grazing incidence X-ray diffraction (GIXD). Macroscopically, the detergent-phospholipid system follows the Gibbs law. However, GIXD shows that the detergent and the phospholipid segregate at the interface. The molecular organization of pure phospholipid domains is imposed by the detergent through surface pressure. Compression and expansion of the surface monolayer system in its final state reveal the stability of the phospholipids domains against dissolution by the detergent in the subphase, even above the detergent cmc. This resistance to dissolution is suppressed by an expansion of the monolayer.