ABSTRACT
We propose and experimentally demonstrate the generation of enhanced optical springs using the optical Kerr effect. A nonlinear optical crystal is inserted into a Fabry-Perot cavity with a movable mirror, and a chain of second-order nonlinear optical effects in the phase-mismatched condition induces the Kerr effect. The optical spring constant is enhanced by a factor of 1.6±0.1 over linear theory. To our knowledge, this is the first realization of optomechanical coupling enhancement using a nonlinear optical effect, which has been theoretically investigated to overcome the performance limitations of linear optomechanical systems. The tunable nonlinearity of demonstrated system has a wide range of potential applications, from observing gravitational waves emitted by binary neutron star postmerger remnants to cooling macroscopic oscillators to their quantum ground state.
ABSTRACT
Intracavity squeezing is a promising technique that may improve the sensitivity of gravitational wave detectors and cool optomechanical oscillators to the ground state. However, the photothermal effect may modify the occurrence of optomechanical coupling due to the presence of a nonlinear optical crystal in an optical cavity. We propose a novel method to predict the influence of the photothermal effect by measuring the susceptibility of the optomechanical oscillator and identifying the net optical spring constant and photothermal absorption rate. Using this method, we succeeded in precisely estimating parameters related to even minor photothermal effects, which could not be measured using a previously developed method.
ABSTRACT
This paper reports on the design and characteristics of a compact module integrating an optical displacement sensor and an electromagnetic actuator for use with vibration-isolation systems installed in KAGRA, the 3-km baseline gravitational-wave detector in Japan. In the technical concept, the module belongs to a family tree of similar modules used in other interferometric gravitational-wave detector projects. After the initial test run of KAGRA in 2016, the sensor part, which is a type of slot sensor, was modified by increasing the spacing of the slot from 5 mm to 15 mm to avoid the risk of mechanical interference with the sensor flag. We confirm that the sensor performance is comparable to that of the previous design despite the modification. We also confirm that the sensor noise is consistent with the theoretical noise budget. The noise level is 0.5 nm/Hz1/2 at 1 Hz and 0.1 nm/Hz1/2 at 10 Hz, and the linear range of the sensor is 0.7 mm or more. We measured the response of the actuator to be 1 N/A and also measured the resistances and inductances of coils of the actuators to confirm consistency with theory. Coupling coefficients among the different degrees of freedom were also measured and shown to be negligible, varying little between designs. A potential concern about thermal noise contribution due to eddy current loss is discussed. As of 2020, 42 of the modules are in operation at the site.
ABSTRACT
Axion dark matter differentiates the phase velocities of the circular-polarized photons. In this Letter, a scheme to measure the phase difference by using a linear optical cavity is proposed. If the scheme is applied to the Fabry-Pérot arm of Advanced-LIGO-like (Cosmic-Explorer-Like) gravitational wave detector, the potential sensitivity to the axion-photon coupling constant, g_{aγ}, reaches g_{aγ}≃8×10^{-13} GeV^{-1}(4×10^{-14} GeV^{-1}) at the axion mass m≃3×10^{-13} eV (2×10^{-15} eV) and remains at around this sensitivity for three orders of magnitude in mass. Furthermore, its sensitivity has a sharp peak reaching g_{aγ}≃10^{-14} GeV^{-1}(8×10^{-17} GeV^{-1}) at m=1.563×10^{-10} eV (1.563×10^{-11} eV). This sensitivity can be achieved without losing any sensitivity to gravitational waves.
ABSTRACT
Gravity generated by large masses has been observed using a variety of probes from atomic interferometers to torsional balances. However, gravitational coupling between small masses has never been observed so far. Here, we demonstrate sensitive displacement sensing of the Brownian motion of an optically trapped 7 mg pendulum motion whose natural quality factor is increased to 10^{8} through dissipation dilution. The sensitivity for an integration time of one second corresponds to the displacement generated in a millimeter-scale gravitational experiment between the probe and a 100 mg source mass, whose position is modulated at the pendulum mechanical resonant frequency. Development of such a sensitive displacement sensor using a milligram-scale device will pave the way for a new class of experiments where gravitational coupling between small masses in quantum regimes can be achieved.
ABSTRACT
We propose a novel experiment to search for axion dark matter that differentiates the phase velocities of the left- and right-handed polarized photons. Our optical cavity measures the difference of the resonant frequencies between two circular polarizations of the laser beam. The design of our cavity adopts a double-pass configuration to realize a null experiment and give a high common mode rejection of environmental disturbances. We estimate the potential sensitivity to the axion-photon coupling constant g_{aγ} for the axion mass mâ²10^{-10} eV. In a low mass range mâ²10^{-15} eV, we can achieve g_{aγ}â²3×10^{-16} GeV^{-1}, which is beyond the current bound by several orders of magnitude.
ABSTRACT
We propose a new method to optically levitate a macroscopic mirror with two vertical Fabry-Pérot cavities linearly aligned. This configuration gives the simplest possible optical levitation in which the number of laser beams used is the minimum of two. We demonstrate that reaching the standard quantum limit (SQL) of a displacement measurement with our system is feasible with current technology. The cavity geometry and the levitated mirror parameters are designed to ensure that the Brownian vibration of the mirror surface is smaller than the SQL. Our scheme provides a promising tool for testing macroscopic quantum mechanics.
ABSTRACT
The preparation of a mechanical oscillator driven by quantum back-action is a fundamental requirement to reach the standard quantum limit (SQL) for force measurement, in optomechanical systems. However, thermal fluctuating force generally dominates a disturbance on the oscillator. In the macroscopic scale, an optical linear cavity including a suspended mirror has been used for the weak force measurement, such as gravitational-wave detectors. This configuration has the advantages of reducing the dissipation of the pendulum (i.e., suspension thermal noise) due to a gravitational dilution by using a thin wire, and of increasing the circulating laser power. However, the use of the thin wire is weak for an optical torsional anti-spring effect in the cavity, due to the low mechanical restoring force of the wire. Thus, there is the trade-off between the stability of the system and the sensitivity. Here, we describe using a triangular optical cavity to overcome this limitation for reaching the SQL. The triangular cavity can provide a sensitive and stable system, because it can optically trap the mirror's motion of the yaw, through an optical positive torsional spring effect. To show this, we demonstrate a measurement of the torsional spring effect caused by radiation pressure forces.
ABSTRACT
A search for Lorentz violation in electrodynamics was performed by measuring the resonant frequency difference between two counterpropagating directions of an optical ring cavity. Our cavity contains a dielectric element, which makes our cavity sensitive to the violation. The laser frequency is stabilized to the counterclockwise resonance of the cavity, and the transmitted light is reflected back into the cavity for resonant frequency comparison with the clockwise resonance. This double-pass configuration enables a null experiment and gives high common mode rejection of environmental disturbances. We found no evidence for odd-parity anisotropy at the level of δc/c â² 10(-14). Within the framework of the standard model extension, our result put more than 5 times better limits on three odd-parity parameters κ(o+)(JK) and a 12 times better limit on the scalar parameter κ(tr) compared with the previous best limits.