Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters











Database
Language
Publication year range
1.
Carbohydr Polym ; 197: 167-173, 2018 Oct 01.
Article in English | MEDLINE | ID: mdl-30007601

ABSTRACT

Over the past decades, most studies with xylanases have used Birchwood xylan as the standard substrate for activity assays. However, recently, Birchwood xylan production was discontinued by major suppliers, creating an important demand for a substitute. Ongoing and future studies require a substrate with characteristics equivalent to the discontinued xylan, in order to enable the comparison of results. In this context, a protocol for the production of a substrate similar to the discontinued commercial Birchwood xylan is reported. Obtained from bleached Eucalyptus cellulose pulp, xylan was extracted using 4% w/v NaOH solution at 25 °C, precipitated with glacial acetic acid (HOAc), and freeze-dried. A thermal pretreatment in an autoclave for 15 min increased its solubility. The resulting xylan was characterized by infrared spectroscopy, thermogravimetry, and NMR. When assessing the activity of xylanases, the results were the same as those for commercial Birchwood xylan.

2.
Bioengineered ; 6(1): 26-32, 2015.
Article in English | MEDLINE | ID: mdl-25488725

ABSTRACT

Bioconversion of hemicellulosic hydrolysate into ethanol plays a pivotal role in the overall success of biorefineries. For the efficient fermentative conversion of hemicellulosic hydrolysates into ethanol, the use of immobilized cells system could provide the enhanced ethanol productivities with significant time savings. Here, we investigated the effect of 2 important factors (e.g., cell concentration and stirring) on ethanol production from sugarcane bagasse hydrolysate using the yeast Scheffersomyces stipitis immobilized in calcium alginate matrix. A 2(2) full factorial design of experiment was performed considering the process variables- immobilized cell concentration (3.0, 6.5 and 10.0 g/L) and stirring (100, 200 and 300 rpm). Statistical analysis showed that stirring has the major influence on ethanol production. Maximum ethanol production (8.90 g/l) with ethanol yield (Yp/s) of 0.33 g/g and ethanol productivity (Qp) of 0.185 g/l/h was obtained under the optimized process conditions (10.0 g/L of cells and 100 rpm).


Subject(s)
Ethanol/metabolism , Polysaccharides/metabolism , Saccharomycetales/chemistry , Saccharomycetales/metabolism , Cells, Immobilized/chemistry , Cells, Immobilized/metabolism , Fermentation , Hydrolysis
3.
3 Biotech ; 3(5): 373-379, 2013 Oct.
Article in English | MEDLINE | ID: mdl-28324330

ABSTRACT

Selection of the raw material and its efficient utilization are the critical factors in economization of second generation (2G) ethanol production. Fermentation of the released sugars into ethanol by a suitable ethanol producing microorganism using cheap media ingredients is the cornerstone of the overall process. This study evaluated the potential of rice bran extract (RBE) as a cheap nitrogen source for the production of 2G ethanol by Scheffersomyces (Pichia) stipitis NRRL Y-7124 using sugarcane bagasse (SB) hemicellulosic hydrolysate. Dilute acid hydrolysis of SB showed 12.45 g/l of xylose and 0.67 g/l of glucose along with inhibitors. It was concentrated by vacuum evaporation and submitted to sequential detoxification (neutralization by calcium hydroxide and charcoal adsorption). The detoxified hydrolysate revealed the removal of furfural (81 %) and 5-hydroxymethylfurfural (61 %) leading to the final concentration of glucose (1.69 g/l) and xylose (33.03 g/l). S. stipitis was grown in three different fermentation media composed of detoxified hydrolysate as carbon source supplemented with varying nitrogen sources i.e. medium #1 (RBE + ammonium sulfate + calcium chloride), medium #2 (yeast extract + peptone) and medium #3 (yeast extract + peptone + malt extract). Medium #1 showed maximum ethanol production (8.6 g/l, yield 0.22 g/g) followed by medium #2 (8.1 g/l, yield 0.19 g/g) and medium #3 (7.4 g/l, yield 0.18 g/g).

SELECTION OF CITATIONS
SEARCH DETAIL