Results of an interlaboratory study on the working curve in vat photopolymerization.

The working curve informs resin properties and print parameters for stereolithography, digital light processing, and other photopolymer additive manufacturing (PAM) technologies. First demonstrated in 1992, the working curve measurement of cure depth vs radiant exposure of light is now a foundational measurement in the field of PAM. Despite its widespread use in industry and academia, there is no formal method or procedure for performing the working curve measurement, raising questions about the utility of reported working curve parameters. Here, an interlaboratory study (ILS) is described in which 24 individual laboratories performed a working curve measurement on an aliquot from a single batch of PAM resin. The ILS reveals that there is enormous scatter in the working curve data and the key fit parameters derived from it. The measured depth of light penetration Dp varied by as much as 7x between participants, while the critical radiant exposure for gelation Ec varied by as much as 70x. This significant scatter is attributed to a lack of common procedure, variation in light engines, epistemic uncertainties from the Jacobs equation, and the use of measurement tools with insufficient precision. The ILS findings highlight an urgent need for procedural standardization and better hardware characterization in this rapidly growing field.

Characterizing light engine uniformity and its influence on liquid crystal display based vat photopolymerization printing.

Vat photopolymerization (VP) is a rapidly growing category of additive manufacturing. As VP methods mature the expectation is that the quality of printed parts will be highly reproducible. At present, detailed characterization of the light engines used in liquid crystal display (LCD)-based VP systems is lacking and so it is unclear if they are built to sufficiently tight tolerances to meet the current and/or future needs of additive manufacturing. Herein, we map the irradiance, spectral characteristics, and optical divergence of a nominally 405 nm LCD-based VP light engine. We find that there is notable variation in all of these properties as a function of position on the light engine that cause changes in extent of polymerization and surface texture. We further demonstrate through a derived photon absorption figure of merit and through printed test parts that the spatial heterogeneity observed in the light engine is significant enough to affect part fidelity. These findings help to explain several possible causes of variable part quality and also highlight the need for improved optical performance on LCD-based VP printers.

Traveling tunable laser projector for UV-blue disinfection dose determinations.

As the COVID-19 pandemic was overtaking the world in the spring of 2020, the National Institute of Standards and Technology (NIST) began collaborating with the National Biodefense Analysis and Countermeasures Center to study the inactivation of SARS-CoV-2 after exposure to different ultraviolet (UV) and blue light wavelengths. This paper describes a 1 kHz pulsed laser and projection system used to study the doses required to inactive SARS-CoV-2 over the wavelength range of 222 to 488 nm. This paper builds on NIST's previous work for water pathogen inactivation using UV laser irradiation. The design of the laser and projection system and its performance in a Biosafety Level 3 (BSL-3) laboratory are given. The SARS-CoV-2 inactivation results (published elsewhere by Schuit, M.A., et al., expected 2022) demonstrate that a tunable laser projection system is an invaluable tool for this research.

SARS-CoV-2 inactivation by ultraviolet radiation and visible light is dependent on wavelength and sample matrix.

Numerous studies have demonstrated that SARS-CoV-2 can be inactivated by ultraviolet (UV) radiation. However, there are few data available on the relative efficacy of different wavelengths of UV radiation and visible light, which complicates assessments of UV decontamination interventions. The present study evaluated the effects of monochromatic radiation at 16 wavelengths from 222 nm through 488 nm on SARS-CoV-2 in liquid aliquots and dried droplets of water and simulated saliva. The data were used to generate a set of action spectra which quantify the susceptibility of SARS-CoV-2 to genome damage and inactivation across the tested wavelengths. UVC wavelengths (≤280 nm) were most effective for inactivating SARS-CoV-2, although inactivation rates were dependent on sample type. Results from this study suggest that UV radiation can effectively inactivate SARS-CoV-2 in liquids and dried droplets, and provide a foundation for understanding the factors which affect the efficacy of different wavelengths in real-world settings.

Models for an Ultraviolet-C Research and Development Consortium.

The development of an international, precompetitive, collaborative, ultraviolet (UV) research consortium is discussed as an opportunity to lay the groundwork for a new UV commercial industry and the supply chain to support this industry. History has demonstrated that consortia can offer promising approaches to solve many common, current industry challenges, such as the paucity of data regarding the doses of ultraviolet-C (UV-C, 200 nm to 280 nm) radiation necessary to achieve the desired reductions in healthcare pathogens and the ability of mobile disinfection devices to deliver adequate doses to the different types of surfaces in a whole-room environment. Standard methods for testing are only in the initial stages of development, making it difficult to choose a specific UV-C device for a healthcare application. Currently, the public interest in UV-C disinfection applications is elevated due to the spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the virus that causes the respiratory coronavirus disease 19 (COVID-19). By channeling the expertise of different UV industry stakeholder sectors into a unified international consortium, innovation in UV measurements and data could be developed to support test methods and standards development for UV healthcare equipment. As discussed in this paper, several successful examples of consortia are applicable to the UV industry to help solve these types of common problems. It is anticipated that a consortium for the industry could lead to UV applications for disinfection becoming globally prolific and commonplace in residential, work, business, and school settings as well as in transportation (bus, rail, air, ship) environments. Aggressive elimination of infectious agents by UV-C technologies would also help to reduce the evolution of antibiotic-resistant bacteria.

Ultraviolet Radiation Technologies and Healthcare-Associated Infections: Standards and Metrology Needs.

The National Institute of Standards and Technology (NIST) hosted an international workshop on ultraviolet-C (UV-C) disinfection technologies on January 14-15, 2020, in Gaithersburg, Maryland, in collaboration with the International Ultraviolet Association (IUVA). This successful public event, as evidenced by the participation of more than 150 attendees, with 65% from the ultraviolet technology industry, was part of an ongoing collaborative effort between NIST and the IUVA and its affiliates to examine the measurement and standards needs for pathogen abatement with UV-C in the healthcare whole-room environment. Prior to and since this event, stakeholders from industry, academia, government, and public health services have been collaboratively engaged with NIST to accelerate the development and use of accurate measurements and models for UV-C disinfection technologies and facilitate technology transfer. The workshop served as an open forum to continue this discussion with a technical focus centered on the effective design, use, and implementation of UV-C technologies for the prevention and treatment of healthcare-associated infections (HAIs) in complex hospital settings. These settings include patient rooms, operating rooms, common staging areas, ventilation systems, personal protective equipment, and tools for the reprocessing and disinfecting of instruments or devices used in medical procedures, such as catheters and ventilators. The critical need for UV-C technologies for disinfection has been amplified by the outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the virus that causes coronavirus disease 2019 (COVID-19), stimulating an even greater emphasis on identifying testing and performance metrology needs. This paper discusses these topics based on the international workshop and community activities since the workshop, including a public World-Wide-Web-based seminar with more than 500 registered attendees on September 30, 2020; an international conference on UV-C technologies for air and surface disinfection, December 8-9, 2020; and a webinar on returning to normalcy with the use of UV-C technologies, April 27 and 29, 2021. This article also serves as an introduction to a special section of the Journal of Research of the National Institute of Standards and Technology, where full papers address recent technical, noncommercial, UV-C technology and pathogen-abatement investigations. The set of papers provides keen insights from the vantage points of medicine and industry. Recent technical developments, successes, and needs in optics and photonics, radiation physics, biological efficacy, and the needs of future markets in UV-C technologies are described to provide a concise compilation of the community's efforts and the state of the field. Standards needs are identified and discussed throughout this special section. This article provides a summary of the essential role of standards for innovation and implementation of UV-C technology for improved patient care and public health.

Gain Calibration of Current-to-Voltage Converters.

Current-to-voltage converters are used in many photometric and radiometric applications. The calibration of current-to-voltage converters at a few input currents is not always sufficient to understand the linearity and the bias of a device. Many devices have structure deviating from a linear response over the operating range of a gain setting. Measurement services that rely on these devices now have decreased uncertainties to a level that requires quantifying the uncertainties and understanding how they propagate. The National Institute of Standards and Technology has developed a system to calibrate the current-to-voltage conversion factor or "gain" and offset of these devices for direct current photocurrents. The equipment used for the calibration is described here, and the results and uncertainties are discussed.

Innovative Approaches to Combat Healthcare-Associated Infections Using Efficacy Standards Developed Through Industry and Federal Collaboration.

Nation-wide, healthcare-associated infections (HAIs) infect one in every 25 hospital patients, account for more than 100,000 deaths and increase medical costs by around $96-147B, each year. Ultraviolet-C (UV-C) antimicrobial devices are shown to reduce the incidence of many of these HAIs by 35% or more, through the deactivation of the pathogen's DNA chain following irradiation with a wavelength of ~254 nm. This irradiation does not kill the cells, per se but effectively prevents the cells from multiplying. Clinical case reductions of 30-70% in Clostridium difficile (C. diff.) have been reported with similar results for methicillin-resistant Staphylococcus aureus (MRSA), and others. The methodology works, but, the adoption of UV-C technology by the healthcare industry has been sporadic. This is largely due to the lack of definitive knowledge and uniform performance standards or measures for efficacy to help healthcare managers make informed, credible investment decisions. The leveling of the playing field with scientifically certifiable data of the efficacy of antimicrobial devices will enhance acceptance by the healthcare industry and public, at large, as well as facilitate science-based decision making. The National Institute of Standards and Technology (NIST) has engaged with the International Ultra Violet Association (IUVA) and its member companies and affiliates to explore ways to develop needed standards, determine appropriate testing protocols, and transfer the technology to help to reduce these inharmonious market conditions. Collaborative efforts are underway to develop science-based answers to the healthcare industry's questions surrounding standards and measures of device disinfection efficacy, as well as reliability, operations and durability. These issues were recently discussed at the IUVA 2018 America's Conference in Redondo Beach, CA in several panel sessions. A major output of the sessions was the formation of a formal IUVA Working Group for the development of antimicrobial standards and initiatives for the healthcare industry. The goal of this working group is to provide global guidance, with specific programs and deliverables, on the use of UV technologies and standards to combat HAIs and to further the stated aims of the IUVA on its outreach to the healthcare industry. This paper reviews the strong collaboration between NIST and its industry partners pursuing the development of standards, guidelines and guidance documents related to healthcare applications that include standard methods for validating performance of UV devices and test guidelines for efficacy measurements. In addition, an overview of the issues, problems, and a summary of the needs confronting future growth and success of the UV industry in the Nation's healthcare application space is provided.

A Snapshot of 118 Solid State Lighting Testing Laboratories' Capabilities.

The National Institute of Standards and Technology (NIST) began to offer proficiency testing for Solid-State Lighting (SSL) products through a Measurement Assurance Program (MAP) in 2010. The MAP program provided proficiency testing complimenting laboratory accreditation to ensure that as SSL products became more prevalent, capable testing laboratories would be available to handle the volume of measurement work. This article communicates the results of the first version of the MAP in which 118 worldwide laboratories participated. The results of the comparison provide a snapshot of the capabilities of accredited laboratories worldwide. Statistical analysis of how the laboratories' measurements compared to NIST's measurements for photometric, colorimetric, and electrical quantities and fit parameters for each measurement are presented. In general, all the laboratory results are within +/- 4 % for total luminous flux and luminous efficacy measurements. The discussion provides reasons for any discrepancies or large uncertainty intervals found in the data. For example, a major finding was that measured differences of RMS current had a larger standard deviation and number of outliers than expected. Two possible explanations are (1) the discrepancies are due to issues with using 4-pole sockets, and (2) the large deviation is caused by some solid state lamps being sensitive to impedance and slew rate of AC power supplies. Further research in this area is being conducted by NIST to help the testing community reach more consistent measurement results.