Deciphering Indirect Nitrite Reduction to Ammonia in High-Entropy Electrocatalysts Using In Situ Raman and X-ray Absorption Spectroscopies.

This research adopts a new method combining calcination and pulsed laser irradiation in liquids to induce a controlled phase transformation of Fe, Co, Ni, Cu, and Mn transition-metal-based high-entropy Prussian blue analogs into single-phase spinel high-entropy oxide and face-centered cubic high-entropy alloy (HEA). The synthesized HEA, characterized by its highly conductive nature and reactive surface, demonstrates exceptional performance in capturing low-level nitrite (NO2 -) in an electrolyte, which leads to its efficient conversion into ammonium (NH4 +) with a Faradaic efficiency of 79.77% and N selectivity of 61.49% at -0.8 V versus Ag/AgCl. In addition, the HEA exhibits remarkable durability in the continuous nitrite reduction reaction (NO2 -RR), converting 79.35% of the initial NO2 - into NH4 + with an impressive yield of 1101.48 µm h-1 cm-2. By employing advanced X-ray absorption and in situ electrochemical Raman techniques, this study provides insights into the indirect NO2 -RR, highlighting the versatility and efficacy of HEA in sustainable electrochemical applications.

Laser-Synthesized Ru-Anchored Few-Layer Black Phosphorus for Superior Hydrogen Evolution: Role of Acoustic Levitation.

Electrochemical water splitting, driven by processed catalysts, is the most reasonable method for hydrogen production. This study demonstrates an activation phenomenon with ruthenium (Ru) nanoclusters on few-layered black phosphorus (BP), greatly enhancing the electrocatalytic hydrogen evolution reaction (HER). Efficient BP exfoliation was achieved using acoustic levitators and pulsed laser irradiation in liquids (PLIL), yielding charge-transfer Ru-nanoclusters on modulated surfaces. Various PLIL parameters were examined for the optimal BP sheet size. After ruthenization, Ru's d-band center facilitated hydrogen adsorption via Ru-H bonding. Synergy between BP's charge-carrier properties and Ru's active sites boosted HER kinetics with an ultralow overpotential of 84 mV at 10 mA/cm2 in KOH. Additionally, the RuO2 || RuBP-2 electrolyzer demonstrated remarkable overall water splitting performance at ∼1.60 V at 10 mA/cm2. These results highlight the pivotal role of metal nanoclusters on exfoliated BP surfaces and offer a refined strategy for high-density electrocatalysts in energy conversion.

Laser-Synthesized Co-Doped CuO Electrocatalyst: Unveiling Boosted Methanol Oxidation Kinetics for Enhanced Hydrogen Production Efficiency by In Situ/Operando Raman and Theoretical Analyses.

The present study details the strategic development of Co-doped CuO nanostructures via sophisticated and expedited pulsed laser ablation in liquids (PLAL) technique. Subsequently, these structures are employed as potent electrocatalysts for the anodic methanol oxidation reaction (MOR), offering an alternative to the sluggish oxygen evolution reaction (OER). Electrochemical assessments indicate that the Co-CuO catalyst exhibits exceptional MOR activity, requiring a reduced potential of 1.42 V at 10 mA cm-2 compared to that of pure CuO catalyst (1.57 V at 10 mA cm-2 ). Impressively, the Co-CuO catalyst achieved a nearly 180 mV potential reduction in MOR compared to its OER performance (1.60 V at 10 mA cm-2 ). Furthermore, when pairing Co-CuO(+)ǀǀPt/C(-) in methanol electrolysis, the cell voltage required is only 1.51 V at 10 mA cm-2 , maintaining remarkable stability over 12 h. This represents a substantial voltage reduction of ≈160 mV relative to conventional water electrolysis (1.67 V at 10 mA cm-2 ). Additionally, both in situ/operando Raman spectroscopy studies and theoretical calculations have confirmed that Co-doping plays a crucial role in enhancing the activity of the Co-CuO catalyst. This research introduces a novel synthetic approach for fabricating high-efficiency electrocatalysts for large-scale hydrogen production while co-synthesizing value-added formic acid.

In-situ monitoring of thiazine molecular aggregation in various solvents via a free-standing acoustic levitator.

In this work, we explored the in-situ reaction modeling of the molecular self-aggregation of methylene blue (MB), which is a cationic thiazine dye, in different solvents via a container-less acoustic levitator by floating of a single droplet. Our in-situ spectroscopic study revealed that the dimer essentially has a sandwich structural geometry with a deviation from parallel stacking and horizontal arrangements in the molecular planes. The real time conversion of the monomer in MB into a dimer and their dynamics in water and ethanol media were monitored using a free-standing acoustic levitator droplet system. The absorption spectra revealed changes in the two resolved peaks (monomer and dimer) and orderliness when water and ethanol were used as the media. Interestingly, the enhancement in the dimerization of MB could be attributed to droplet evaporation, which is difficult to observe in typical reactor containers. Moreover, acidic protonation resulted in a change in the aggregation orientation direction of the MB molecules, forming an unusual J-aggregation. Theoretical DFT calculations revealed that MB underwent typical H-aggregation and J-aggregation in the different solvent environments, and their orientations well matched the spectroscopic data.

In situ studies on free-standing synthesis of nanocatalysts via acoustic levitation coupled with pulsed laser irradiation.

Acoustic levitation is a distinctive and versatile tool for levitating and processing free-standing single droplets and particles. Liquid droplets suspended in an acoustic standing wave provide container-free environments for understanding chemical reactions by avoiding boundary effects and solid surfaces. We attempted to use this strategy for the production of well-dispersed uniform catalytic nanomaterials in an ultraclean confined area without the addition of external reducing agents or surfactants. In this study, we report on the synthesis of gold and silver nanoparticles (NPs) via acoustic levitation coupled with pulsed laser irradiation (PLI). In situ UV-Visible and Raman spectroscopic techniques were performed to monitor the formation and growth of gold and silver NPs. The PLI was used for the photoreduction of targeted metal ions present in the levitated droplets to generate metal NPs. Additionally, the cavitation effect and bubble movement accelerate the nucleation and decrease the size of NPs. The synthesized Au NPs with âˆ¼ 5 nm size showed excellent catalytic behavior towards the conversion of 4-nitrophenol to 4-aminophenol. This study may open a new door for synthesizing various functional nanocatalysts and for achieving new chemical reactions in suspended droplets.

Sustainable removal of nitrite waste to value-added ammonia on Cu@Cu2O core-shell nanostructures by pulsed laser technique.

The biochemical reduction of nitrite (NO2-) ions to ammonia (NH3) requires six electrons and is catalyzed by the cytochrome c NO2- reductase enzyme. This biological reaction inspired scientists to explore the reduction of nitrogen oxyanions, such as nitrate (NO3-) and NO2- in wastewater, to produce the more valuable NH3 product. It is widely known that copper (Cu)-based nanoparticles (NPs) are selective for the NO3- reduction reaction (NO3-RR), but the NO2-RR has not been well explored. Therefore, we attempted to address the electrocatalytic conversion of NO2- to NH3 using Cu@Cu2O core-shell NPs to simultaneously treat wastewater by removing NO2- and producing valuable NH3. The Cu@Cu2O core-shell NPs were constructed using the pulsed laser ablation of Cu sheet metal in water. The core-shell nanostructure of these particles was confirmed by various characterization techniques. Subsequently, the removal of NO2- and the ammonium (NH4+)-N yield rate were estimated using the Griess and indophenol blue methods, respectively. Impressively, the Cu@Cu2O core-shell NPs exhibited outstanding NO2-RR activity, demonstrating a maximum NO2- removal efficiency of approximately 94% and a high NH4+-N yield rate of approximately 0.03 mmol h-1.cm-2 at -1.6 V vs. a silver/silver chloride reference electrode under optimal conditions. The proposed NO2-RR mechanism revealed that the (111) facet of Cu favors the selective conversion of NO2- to NH3 via a six-electron transfer. This investigation may offer a new insight for the rational design and detailed mechanistic understanding of electrocatalyst architecture for the effective conversion of NO2- to NH4+.

Fabrication of nonenzymatic electrochemical sensor based on Zn@ZnO core-shell structures obtained via pulsed laser ablation for selective determination of hydroquinone.

Herein, we fabricated a more sensitive nonenzymatic electrochemical sensor for the selective determination of hydroquinone as a targeted pollutant at zinc@zinc oxide (Zn@ZnO) core-shell nanostructures. The nanostructured Zn@ZnO materials were produced using pulsed laser ablation in an aqueous medium without the use of any reducing agents or surfactants. The detailed structural, morphological, elemental composition, and electrochemical voltammetric analyses revealed a significant improvement in Zn@ZnO performance for selective hydroquinone detection. A broad linear calibration response was obtained as 10-90 µM with high sensitivity of 0.5673 µA µM-1 cm-2 and the low detection limit was 0.10443 µM for detection of hydroquinone. The modified Zn@ZnO electrode's excellent electrochemical sensing performance was attributed to the accessibility of a high electrochemically active surface area (EASA = 0.00345 µF/cm2) and an improved electron transfer rate. Stability and antiinterference tests were also carried out. A 100 fold increase in the concentration of common cations and anions (Na+, Mg2+, Cl-, SO42-, and NO3-) did not affect the selective determination of HQ. As a result, the fabricated electrochemical sensor has a wide range of potential applications in environmental and biomedical science.

Improved visible light photocatalytic degradation of yttrium doped NiMgAl layered triple hydroxides for the effective removal of methylene blue dye.

Fabrication of layered triple hydroxides (LTH) is a typical and remarkable approach to produce new functionalities passionately investigated for photocatalytic removal of organic pollutants from industrial wastewater. The hydrothermal method was used to prepare different weight percentages of yttrium (Y) doped NiMgAl LTH. The structural, functional, optical, and morphological properties of the prepared samples were investigated using X-ray diffraction, Fourier transformed-infrared spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, and scanning electron microscopy. The photocatalytic degradation of the different percentages of Y-doped LTH samples were assessed through the photocatalytic degradation of methylene blue dye under the visible light irradiation. When compared to other lower concentrations of Y doping, the photocatalytic degradation efficiency of 1 wt.% Y-doped LTH was higher. Thus, the optimized LTH's improved photocatalytic performance was attributed to increased visible light absorption with low transmission and improved electron-hole separation.

Ultraviolet photodissociation circular dichroism spectroscopy of protonated L-phenylalanyl-L-alanine in a cryogenic ion trap.

We obtained ultraviolet photodissociation (UVPD) circular dichroism (CD) spectra of protonated L-phenylalanyl-L-alanine (L-H+PheAla) near the origin band of the S0-S1 transition using cryogenic ion spectroscopy. Infrared (IR) ion-dip, IR-UV hole burning (HB) and UV-UV HB spectra showed that L-H+PheAla existed as two different conformers in a cryogenic ion trap, and they had nearly identical peptide backbones but different conformations in the Phe side chain. The UVPD CD spectra revealed that the two conformers had opposite CD signs and significantly different CD magnitudes from each other. These results demonstrate that the CD value of L-H+PheAla near the origin band is strongly influenced by the conformation of the Phe side chain.

Method development and mechanistic study on direct pulsed laser irradiation process for highly effective dechlorination of persistent organic pollutants.

Chlorine-based compounds are typical persistent organic pollutants (POPs) that are widely generated in industrial production. This paper reports an effective and rapid pulsed laser irradiation technique for the dechlorination of hexachlorobenzene (HCB), a model pollutant, without additional catalysts or supports. The effects of the laser parameters, including the laser wavelength and power, on the dechlorination efficiency, were also investigated. The optimized results showed that a lower laser wavelength of 266 nm with 10 mJ/pulse power exhibited the highest dechlorination efficiency with 95% within 15 min. In addition, the laser beam effect was examined by designing the direct-pulsed laser single and multipath irradiation system. The results showed that improving the laser beam profile resulted in more than 95% dechlorination efficiency within 5 min. Thus, the dechlorination reaction proceeded much faster as the surface area that the laser beam came in contact with increased due to the multipath system than the single pathway. Gas chromatography identified benzene as the final product of HCB with pentachlorobenzene (PCB), tetrachlorobenzene (TeCB), trichlorobenzene (TCB), dichlorobenzene (DCB), and chlorobenzene (CB) as intermediate products. The mechanism of HCB dechlorination was explained by a comparison of theoretical calculations with the experimental results. The present study reports an advanced technique for the complete dechlorination of chlorobenzenes, which holds great application potential in environmental remediation.

Chiral and Isomeric Discrimination of Chiral Molecular Ions by Cold Ion Circular Dichroism Spectroscopy.

Circular dichroism (CD) spectra contain information about absolute configurations and conformations of chiral compounds. However, extracting this information from CD spectra in solution is challenging, because the spectra exhibit only the averaged CD values of all different conformers. CD spectroscopy of jet-cooled molecules can provide conformation-specific CD spectra, but its application to biomolecules has been limited due to the difficulty of their production in the gas phase. Here, we obtained the first CD spectra of chiral molecular ions produced by electrospray ionization (ESI) using cold ion CD spectroscopy. Protonated l- or d-phenylalanine ions produced by ESI were stored in a cold quadrupole ion trap and irradiated by multiple laser pulses with left or right circular polarization. The CD spectra exhibited well-resolved CD bands of two conformers, whose signs were opposite to each other. This study will broaden the scope of conformation-resolved CD spectroscopy to large molecular ions without size limitations.

Effects of Size and Prestressing of Aluminum Particles on the Oxidation of Levitated exo-Tetrahydrodicyclopentadiene Droplets.

Addition of high-energy-density materials such as aluminum (Al) microparticles or nanoparticles to liquid propellants potentially improves performance of the fuel. We report on the effects of untreated, prestressed, and superquenched aluminum particles with diameters of 100 nm, 250 nm, 500 nm, 1.6 µm, and 8.8 µm on the combustion of JP-10 droplets acoustically levitated in an oxygen-argon atmosphere. Ignition was initiated by a carbon dioxide laser, and the resulting oxidation processes were traced by Raman, Fourier-transform infrared (FTIR), and ultraviolet-visible (UV-vis) spectroscopies together with high-speed optical and IR thermal-imaging cameras. The UV-vis emission spectra reveal that the key reactive radical intermediates hydroxyl (OH), methylidyne (CH), dicarbon (C2), aluminum monoxide (AlO), and aluminum monohydride (AlH) were formed in addition to atomic aluminum (Al) and the final oxidation products of JP-10, namely, water (H2O) and carbon dioxide (CO2). The Al particles facilitated ignition of the JP-10 droplets and produced higher temperatures in the combustion process of up to typically 2600 K. The effect of the Al particles on the ignition and maximum flame temperatures increased as the diameters reduced. The different stress treatments did not produce observable changes for the ignition or combustion of the droplets, which indicates that the liquid propellant was not significantly affected by manipulating the mechanical properties of the fuel particle additive. The initiation and enhancement of the combustion were a consequence of forming highly reactive atomic oxygen (O) and aluminum monoxide (AlO) radicals in the reaction of aluminum atoms with molecular oxygen in the gas phase. These radicals initiate the degradation of JP-10 via atomic hydrogen abstraction forming the hydroxyl (OH) and aluminum hydroxide (AlOH) radicals in reactions which are mainly exothermic by up to 68 kJ mol-1. In contrast, hydrogen abstractions from JP-10 by molecular oxygen or atomic aluminum are strongly endothermic by up to 236 kJ mol-1, thus making these reactions less competitive. The generation of C10H15 hydrocarbon radicals from the JP-10 initiates successive oxidations and chain reactions with molecular oxygen leading eventually to carbon dioxide and water. These combined experimental results provide insight into how aluminum particles facilitate the oxidation and reaction mechanisms of JP-10 droplets.

Induced Circular Dichroism of Jet-Cooled Phenol Complexes with (R)-(-)-2-Butanol.

The induced circular dichroism (ICD) of phenol complexed with (R)-(-)-2-butanol [PhOH-(-)BOH] in a supersonic jet is investigated using resonant two-photon ionization circular dichroism (R2PICD) spectroscopy. The R2PICD spectrum of PhOH-(-)BOH exhibits nonzero ICD bands near the absorption region of bare PhOH, where (-)BOH is transparent. Two different conformers containing a single hydrogen bond between PhOH and (-)BOH are identified using ultraviolet-ultraviolet hole-burning and infrared ion-dip spectroscopy combined with quantum theoretical calculations. The ICD values of the two conformers are similar to each other. To understand these similar ICD effects of the conformers, the geometrical asymmetry of the PhOH moiety bound to (-)BOH and the coupling strength of the electric transition dipole moments between PhOH and (-)BOH are estimated. Comparing the ICD values of PhOH-(-)BOH with those of PhOH-(-)-l-methyl lactate in the previous report [ Hong , A. ; J. Phys. Chem. Lett. 2018 , 9 , 476 -480 ], we investigate the physical properties that may govern the differences of the ICD values between the two complexes.

Oxidation of Levitated exo-Tetrahydrodicyclopentadiene Droplets Doped with Aluminum Nanoparticles.

Advancement of the next generation of air-breathing propulsion systems will require developing novel high-energy fuels by adding high energy-density materials such as aluminum to enhance fuel performance. We present original measurements, obtained by exploiting the ultrasonic levitation technique, to elucidate the oxidation of exo-tetrahydrodicyclopentadiene (JP-10; C10H16) droplets doped with 80 nm-diameter aluminum nanoparticles (Al NPs) in an oxygen-argon atmosphere. The oxidation was monitored by Raman, Fourier-transform infrared (FTIR), and ultraviolet-visible (UV-Vis) spectroscopies together with high-speed optical and IR thermal-imaging cameras. The addition of 0.5 wt % of the Al NPs was critical for ignition under our experimental conditions occurring at 540 ± 40 K. Diatomic radicals such as OH, CH, C2, and AlO were observed during the oxidation of the doped JP-10 droplets, thus providing insight into the reactive intermediates. The influence of the Al NPs on the reaction mechanism is discussed.

Isomer-Specific Induced Circular Dichroism Spectroscopy of Jet-Cooled Phenol Complexes with (-)-Methyl l-Lactate.

Induced circular dichroism (ICD) is the CD observed in the absorption of an achiral molecule bound to a transparent chiral molecule through noncovalent interactions. ICD spectroscopy has been used to probe the binding between molecules, such as protein-ligand interactions. However, most ICD spectra have been measured in solution, which only exhibit the averaged CD values of all conformational isomers in solution. Here, we obtained the first isomer-selective ICD spectra by applying resonant two-photon ionization CD spectroscopy to jet-cooled phenol complexes with (-)-methyl l-lactate (PhOH-(-)ML). The well-resolved CD bands in the spectra were assigned to two conformers, which contained different types of hydrogen-bonding interactions between PhOH and (-)ML. The ICD values of the two conformers have different signs and magnitudes, which were explained by differences both in the geometrical asymmetries of PhOH bound to (-)ML and in the electronic coupling strengths between PhOH and (-)ML.

Conformational structures of jet-cooled acetaminophen-water clusters: a gas phase spectroscopic and computational study.

Jet-cooled acetaminophen (AAP)-water clusters, AAP-(H2O)1, were investigated by mass-selected resonant two-photon ionization (R2PI), ultraviolet-ultraviolet hole-burning (UV-UV HB), infrared-dip (IR-dip), and infrared-ultraviolet hole-burning (IR-UV HB) spectroscopy. Each syn- and anti-AAP rotamer has three distinctive binding sites (-OH, >CO, and >NH) for a water molecule, thus 6 different AAP-(H2O)1 conformers are expected to exist in the molecular beam. The origin bands of the AAP(OH)-(H2O)1 and AAP(CO)-(H2O)1 conformers (including their syn- and anti-conformers) in the R2PI spectrum are shifted to red and blue compared to those of the AAP monomer, respectively. These frequency shifts upon complexation between a water molecule and a specific binding site of AAP are also predicted by theoretical calculations. The spectral assignments of the origin bands in the R2PI spectra and the IR vibrational bands in the IR-dip spectra of the four lowest-energy conformers of AAP-(H2O)1, [syn- and anti-AAP(OH)-(H2O)1 and syn- and anti-AAP(CO)-(H2O)1], are aided by ab initio and time-dependent density functional theory (TDDFT) calculations. Further investigation of the IR-dip spectra has revealed a hydrogen-bonded NH stretching mode, supporting the presence of the syn-AAP(NH)-(H2O)1 conformer. Moreover, by employing IR-UV HB spectroscopy, we have reconfirmed the existence of the syn-AAP(NH)-(H2O)1 conformer, which happened to be buried underneath the broad background contributed by the AAP(OH)-(H2O)1 conformers. These observations have led us to conclude that all of the possible conformers of AAP-(H2O)1 have been found in this study.

Conformationally resolved spectra of acetaminophen by UV-UV hole burning and IR dip spectroscopy in the gas phase.

Electronic and vibrational spectra of acetaminophen were measured by using UV-UV hole burning (HB) and IR dip spectroscopy. HB spectra show the coexistence of 4 different species, which include two new ones. Low-frequency transitions in the spectra are reproduced by a one-dimensional periodic potential with a free-rotor basis set for the methyl group. From the analysis, we concluded that acetaminophen has two conformers and each conformer gives two independent transitions starting from the most stable 0a(1) and the hot 1e internal rotational levels. It is also found that the HB spectrum of the trans-conformer in the previous report is that from the 1e excited level, while the HB spectrum of the cis-conformer is contaminated by the transitions of the trans-conformer. Potential curves of the methyl rotational motion are determined both in S(0) and S(1).

Conformationally resolved structures of jet-cooled acetaminophen by UV-UV hole-burning spectroscopy.

The conformational structures of jet-cooled acetaminophen were investigated in the gas phase by resonant 2-photon ionization and UV-UV hole-burning spectroscopy. In contrast to the results from a previous study, two nearly isoenergetic conformers were distinctly found in a supersonic molecular beam expansion and positively identified as the cis and trans isomers of acetaminophen by UV-UV hole-burning spectroscopy. The 0-0 bands of the cis and trans isomers were found at 33518.7 and 33485.6 cm(-1), respectively. The vibronic bands of the two isomers are close-lying and/or partially overlapping due to the small energy difference (33 cm(-1)) between the two 0-0 bands. As a consequence, the recorded resonant 2-photon ionization spectrum is highly congested in the low excitation energy region, which develops continuously into a featureless, broadened spectrum in the high energy region.