ABSTRACT
One of the key reasons for the poor performance of natural enemies of honeydew-producing insect pests is mutualism between ants and some aphid species. The findings demonstrated that red wood ant, Formica rufa Linnaeus (Hymenoptera: Formicidae) had a deleterious impact on different biological parameters of the lady beetle, Hippodamia variegata Goeze (Coleoptera: Coccinellidae). H. variegata laid far fewer eggs in ant-tended aphid colonies, laying nearly 2.5 times more eggs in ant absence. Ants antennated and bit the lady beetle eggs, resulting in significantly low egg hatching of 66 per cent over 85 per cent in ant absent treatments. The presence of ants significantly reduced the development of all larval instars. The highest reduction was found in the fourth larval instar (31.33% reduction), and the lowest in the first larval instar (20% reduction). Later larval instars were more aggressively attacked by ants than earlier instars. The first and second larval instars stopped their feeding and movement in response to ant aggression. The third and fourth larval instars modified their mobility, resulting in increased ant aggression towards them. Adult lady beetles were shown to be more vulnerable to ant attacks than larvae. However, H. variegata adults demonstrated counterattacks in the form of diverse defensive reaction behaviours in response to F. rufa aggression.
Subject(s)
Ants , Coleoptera , Larva , Animals , Ants/physiology , Coleoptera/physiology , Coleoptera/growth & development , Larva/growth & development , Larva/physiology , Aphids/physiology , Aggression , Female , Symbiosis , Oviposition , Predatory BehaviorABSTRACT
Inverse finite element analysis (iFEA) of the atrioventricular heart valves (AHVs) can provide insights into the in-vivo valvular function, such as in-vivo tissue strains; however, there are several limitations in the current state-of-the-art that iFEA has not been widely employed to predict the in-vivo, patient-specific AHV leaflet mechanical responses. In this exploratory study, we propose the use of Bayesian optimization (BO) to study the AHV functional behaviors in-vivo. We analyzed the efficacy of Bayesian optimization to estimate the isotropic Lee-Sacks material coefficients in three benchmark problems: (i) an inflation test, (ii) a simplified leaflet contact model, and (iii) an idealized AHV model. Then, we applied the developed BO-iFEA framework to predict the leaflet properties for a patient-specific tricuspid valve under a congenital heart defect condition. We found that the BO could accurately construct the objective function surface compared to the one from a [Formula: see text] grid search analysis. Additionally, in all cases the proposed BO-iFEA framework yielded material parameter predictions with average element errors less than 0.02 mm/mm (normalized by the simulation-specific characteristic length). Nonetheless, the solutions were not unique due to the presence of a long-valley minima region in the objective function surfaces. Parameter sets along this valley can yield functionally equivalent outcomes (i.e., closing behavior) and are typically observed in the inverse analysis or parameter estimation for the nonlinear mechanical responses of the AHV. In this study, our key contributions include: (i) a first-of-its-kind demonstration of the BO method used for the AHV iFEA; and (ii) the evaluation of a candidate AHV in-silico modeling approach wherein the chordae could be substituted with equivalent displacement boundary conditions, rendering the better iFEA convergence and a smoother objective surface.
Subject(s)
Heart Valves , Tricuspid Valve , Humans , Finite Element Analysis , Bayes Theorem , Heart Valves/physiology , Tricuspid Valve/physiology , Computer SimulationABSTRACT
Nickel-based oxides are selected for their inexpensive cost, well-defined redox activity, and flexibility in adjusting nanostructures via optimization of the synthesis process. This communique explores the field of energy storage for hydrothermally synthesized NiO/ZnO nanowires by analysing their capacitive behaviour. The p-type NiO was successfully built onto the well-ordered mesoporous n-type ZnO matrix, resulting in the formation of p-n heterojunction artefacts with porous nanowire architectures. NiO/ZnO nanowire-based electrodes exhibited much higher electrochemical characteristics than bare NiO nanowires. The heterojunction at the interface between the NiO and ZnO nanoparticles, their specific surface area, as well as their combined synergetic influence, are accountable for the high specific capacitance (Cs) of 1135 Fg-1at a scan rate of 5 mV s-1. NiO/ZnO nanowires show an 18% dip in initial capacitance even after 6000 cycles, indicating excellent capacitance retention and low resistance validated by electrochemical impedance spectroscopy. In addition, the specific capacitance, energy and power density of the solid state asymmetric capacitor that was manufactured by employing NiO/ZnO as the positive electrode and activated carbon as the negative electrode were found to be 87 Fg-1, 23 Whkg-1and 614 Wkg-1, respectively. The novel electrode based on NiO/ZnO demonstrates excellent electrochemical characteristics all of which point to its promising application in supercapacitor devices.
ABSTRACT
Biaxial mechanical characterizations are the accepted approach to determine the mechanical response of many biological soft tissues. Although several computational and experimental studies have examined how experimental factors (e.g., clamped vs. suture mounting) affect the acquired tissue mechanical behavior, little is known about the role of specimen dimensions in data acquisition and the subsequent modeling. In this study, we combined our established mechanical characterization framework with an iterative size-reduction protocol to test the hypothesis that specimen dimensions affect the observed mechanical behavior of biaxial characterizations. Our findings indicated that there were non-significant differences in the peak equibiaxial stretches of tricuspid valve leaflets across four specimen dimensions ranging from 4.5×4.5mm to 9 × 9mm. Further analyses revealed that there were significant differences in the low-tensile modulus of the circumferential tissue direction. These differences resulted in significantly different constitutive model parameters for the Tong-Fung model between different specimen dimensions of the posterior and septal leaflets. Overall, our findings demonstrate that specimen dimensions play an important role in experimental characterizations, but not necessarily in constitutive modeling of soft tissue mechanical behavior during biaxial testing with the commercial CellScale BioTester.
ABSTRACT
Hypoplastic Left Heart Syndrome (HLHS) is a congenital heart defect that requires a three-stage surgical palliation to create a single ventricle system in the right side of the heart. Of patients undergoing this cardiac palliation series, 25% will develop tricuspid regurgitation (TR), which is associated with an increased mortality risk. Valvular regurgitation in this population has been extensively studied to understand indicators and mechanisms of comorbidity. In this article, we review the current state of research on TR in HLHS, including identified valvular anomalies and geometric properties as the main reasons for the poor prognosis. After this review, we present some suggestions for future TR-related studies to answer the central question: What are the predictors of TR onset during the three palliation stages? These studies involve (i) the use of engineering-based metrics to evaluate valve leaflet strains and predict tissue material properties, (ii) perform multivariate analyses to identify TR predictors, and (iii) develop predictive models, particularly using longitudinally tracked patient cohorts to foretell patient-specific trajectories. Regarded together, these ongoing and future efforts will result in the development of innovative tools that can aid in surgical timing decisions, in prophylactic surgical valve repair, and in the refinement of current intervention techniques.
Subject(s)
Cardiac Surgical Procedures , Transposition of Great Vessels , Humans , Congenitally Corrected Transposition of the Great Arteries , Transposition of Great Vessels/diagnostic imaging , Transposition of Great Vessels/surgery , Cardiac Surgical Procedures/adverse effects , Treatment Outcome , ArteriesABSTRACT
Objectives: Limited data on performing bilateral pulmonary artery banding (BPAB) before stage 1 Norwood procedure suggest that some patients may benefit through the postponement of the major cardiopulmonary bypass procedure. The objective of this study was to evaluate the effectiveness of BPAB in the surgical management of high-risk patients with hypoplastic left heart syndrome (HLHS). Methods: A retrospective review of all high-risk neonates with HLHS who underwent BPAB at our institution was performed. No patients, including those with intact or highly restrictive atrial septum (IAS), were excluded. Results: Between October 2015 and April 2021, 49 neonates with HLHS (including 6 with IAS) underwent BPAB, 40 of whom progressed to the Norwood procedure. Risk factors for not progressing to the Norwood procedure after BPAP include low birth weight (P = .043), the presence of multiple extracardiac anomalies (P = .005), and the presence of genetic disorders (P = .028). Operative mortality was 7.5% (3/40). IAS was associated with operative mortality (P = .022). Conclusions: The strategy of BPAB prestage 1 Norwood procedure was successful in identifying at-risk patients and improving Norwood survival. Although not all patients will need this hybrid approach, a significant number can be expected to benefit from this tactic. These results support the need for a substantial hybrid strategy, in addition to a primary stage 1 Norwood surgical strategy, in the management of HLHS.
ABSTRACT
The pre-strains of biological soft tissues are important when relating their in vitro and in vivo mechanical behaviors. In this study, we present the first-of-its-kind experimental characterization of the tricuspid valve leaflet pre-strains. We use 3D photogrammetry and the reproducing kernel method to calculate the pre-strains within the central 10×10 mm region of the tricuspid valve leaflets from n=8 porcine hearts. In agreement with previous pre-strain studies for heart valve leaflets, our results show that all the three tricuspid valve leaflets shrink after being explanted from the ex vivo heart. These calculated strains are leaflet-specific and the septal leaflet experiences the most compressive changes. Furthermore, the strains observed after dissection of the central 10×10 mm region of the leaflet are smaller than when the valve is explanted, suggesting that our computed pre-strains are mainly due to the release of in situ annulus and chordae connections. The leaflets are then mounted on a biaxial testing device and preconditioned using force-controlled equibiaxial loading. We show that the employed preconditioning protocol does not 100% restore the leaflet pre-strains as removed during tissue dissection, and future studies are warranted to explore alternative preconditioning methods. Finally, we compare the calculated biomechanically oriented metrics considering five stress-free reference configurations. Interestingly, the radial tissue stretches and material anisotropies are significantly smaller compared to the post-preconditioning configuration. Extensions of this work can further explore the role of this unique leaflet-specific leaflet pre-strains on in vivo valve behavior via high-fidelity in-silico models. STATEMENT OF SIGNIFICANCE: This study provides a first of its kind benchtop characterization of tricuspid valve leaflet pre-strains. We used 3D photogrammetry to reconstruct the central region of the tricuspid valve leaflets in three configurations. The associated configurational changes revealed compressive, leaflet-specific strains after dissection of the valve from its in situ environment. Interestingly, we found that biaxial preconditioning did not restore the measured pre-strains of the leaflets. Depending on the selection of the stress-free reference configuration, this led to substantial differences in the leaflet mechanics. Our findings and methodology are crucial when it comes to relating in vitro mechanical behaviors to valve function in vivo. Future studies can integrate our quantified pre-strains into in-silico simulations to get more realistic predictions about the valve function.
Subject(s)
Mechanical Phenomena , Tricuspid Valve , Animals , Anisotropy , Computer Simulation , SwineABSTRACT
Objective: Hypoplastic left heart syndrome (HLHS) is a congenital disease characterized by an underdevelopment of the anatomical components inside the left heart. Approximately 30% of HLHS newborns will develop tricuspid regurgitation (TR), and it is currently unknown how the valve annulus mechanics and geometry are associated with regurgitation. Thus, we present an engineering mechanics-based analysis approach to quantify the mechanics and geometry of the HLHS-afflicted tricuspid valve (TV), using 4-dimensional echocardiograms. Methods: Infants born with hypoplastic left heart syndrome (n=8) and healthy newborns (n=4) had their tricuspid valves imaged, and the data was imported to the 3D Slicer. The annular curves were defined at five points in the cardiac cycle. The geometry and deformation (strain) of the TV annulus were calculated to elucidate the mechanics of this critical structure, and compare them between HLHS and normal neonates. Results: For the annular geometry, HLHS-afflicted newborns had significantly larger annular circumferences (20-30%) and anterior-posterior diameters (35-45%) than the healthy patients. From a biomechanics perspective, the HLHS patients had significantly smaller strains in the anterior segments (-0.1±2.6%) during end diastolic and end isovolumetric relaxation (1.7±3.0%) compared to the healthy counterparts (-13.3±2.9% and 6.8±0.9%, respectively). Conclusions: The image-based analysis in this study may provide novel insights into the geometric and mechanistic differences in the TV annulus between healthy and HLHS newborns. Future longitudinal studies of the biomechanics of TV annulus and other subvalvular structures may inform our understanding of the initiation and development of TR and the design of optimal repairs in this challenging population.
ABSTRACT
Bicuspid aortic valve (BAV) is the most common congenital cardiac defect, commonly associated with valve dysfunction and coarctation of aorta. Rarely, BAV can be associated with abnormalities of the coronary arteries, the most common of which are ectopic coronary origins. In this report, we present a case of a 2-year-old child with BAV, without coexisting supravalvular aortic stenosis, who was found to have a left main coronary ostio-proximal stenosis, leading to ischemic cardiomyopathy and congestive heart failure.
ABSTRACT
Neonates with congenital heart disease (CHD) are at an increased risk of developing necrotizing enterocolitis (NEC), an acute inflammatory intestinal injury most commonly associated with preterm infants. The rarity of this complex disease, termed cardiac NEC, has resulted in a dearth of information on its pathophysiology. However, a higher incidence in term infants, effects on more distal regions of the intestine, and potentially a differential immune response may distinguish cardiac NEC as a distinct condition from the more common preterm, classical NEC. In this review, risk factors, differentiated from those of classical NEC, are discussed according to their potential contribution to the disease process, and a general pathogenesis is postulated for cardiac NEC. Additionally, biomarkers specific to cardiac NEC, clinical outcomes, and strategies for achieving enteral feeds are discussed. Working towards an understanding of the mechanisms underlying cardiac NEC may aid in future diagnosis of the condition and provide potential therapeutic targets.
Subject(s)
Cardiac Surgical Procedures , Heart Valve Prosthesis Implantation , Pulmonary Valve Insufficiency , Pulmonary Valve , Tetralogy of Fallot , Heart Valve Prosthesis Implantation/adverse effects , Humans , Pulmonary Valve/diagnostic imaging , Pulmonary Valve/surgery , Pulmonary Valve Insufficiency/diagnostic imaging , Pulmonary Valve Insufficiency/etiology , Pulmonary Valve Insufficiency/surgery , Tetralogy of Fallot/surgery , Treatment OutcomeABSTRACT
Narrowing of the retroaortic space after repair of common arterial trunk (CAT) with interrupted aortic arch (IAA) is a well-known issue. We present a newborn with CAT, IAA, and functionally univentricular heart (tricuspid atresia) who underwent repair of CAT, IAA, and left ventricle-to-pulmonary artery (LV-to-PA) conduit placement with the Lecompte maneuver. The patient suffered from left bronchus compression postoperatively, which was relieved by tracheobronchial release.
Subject(s)
Aortic Coarctation , Heart Defects, Congenital , Truncus Arteriosus, Persistent , Aorta, Thoracic/abnormalities , Aorta, Thoracic/surgery , Bronchi/surgery , Heart Defects, Congenital/diagnostic imaging , Heart Defects, Congenital/surgery , Humans , Infant , Truncus Arteriosus, Persistent/surgeryABSTRACT
We report a neonate who presented with spontaneous thrombus formation in the native aortic root after Norwood palliation for hypoplastic left heart syndrome. Thrombus formation led to myocardial ischaemia due to decreased coronary blood flow with electrocardiographic signs of ischaemia and elevated cardiac enzymes. Aggressive thrombolysis and anticoagulation therapy were major contributors to successful outcome.
Subject(s)
Hypoplastic Left Heart Syndrome , Myocardial Ischemia , Norwood Procedures , Thrombosis , Aorta/diagnostic imaging , Humans , Hypoplastic Left Heart Syndrome/complications , Hypoplastic Left Heart Syndrome/diagnosis , Hypoplastic Left Heart Syndrome/surgery , Infant, Newborn , Palliative Care , Thrombosis/diagnosis , Thrombosis/drug therapy , Thrombosis/etiology , Treatment OutcomeABSTRACT
The leaflets of the atrioventricular heart valves (AHVs) regulate the one-directional flow of blood through a coordination of the extracellular matrix components, including the collagen fibers, elastin, and glycosaminoglycans. Dysfunction of the AHVs, such as those caused by unfavorable microstructural remodeling, lead to valvular heart diseases and improper blood flow, which can ultimately cause heart failure. In order to better understand the mechanics and remodeling of the AHV leaflets and how therapeutics can inadvertently cause adverse microstructural changes, a systematic characterization of the role of each constituent in the biomechanical properties is appropriate. Previous studies have quantified the contributions of the individual microstructural components to tissue-level behavior for the semilunar valve cusps, but not for the AHV leaflets. In this study, for the first time, we quantify the relationships between microstructure and mechanics of the AHV leaflet using a three-step experimental procedure: (i) biaxial tension and stress relaxation testing of control (untreated) porcine AHV anterior leaflet specimens; (ii) enzyme treatment to remove a portion of either the collagen or elastin constituent; and (iii) biaxial tensile and stress relaxation testing of the constituent-removed (treated) specimens. We have observed that the removal of â¼100% elastin resulted in a â¼10% decrease in the tissue extensibility with biaxial tension and a â¼10% increase in the overall stress reduction with stress relaxation. In contrast, removal of 46% of the collagen content insignificantly affected tissue extensibility with biaxial tension and significantly increased stress decay (10%) with stress relaxation. These findings provide an insight into the microstructure-mechanics relationship of the AHVs and will be beneficial for future developments and refinements of microstructurally informed constitutive models for the simulation of diseased and surgically intervened AHV function. STATEMENT OF SIGNIFICANCE: This study presents, for the first time, a thorough mechanical characterization of the atrioventricular heart valve leaflets before and after enzymatic removal of elastin and collagen. We found that the biaxial tensile properties of elastin-deficient tissues and collagen-deficient are stiffer. The fact of elastin supporting low-stress valve function and collagen as the main load-bearing component was evident in a decrease in the low-tension modulus for elastin-deficient tissues and in the high-tension modulus for collagen-deficient tissues. Our quantification and experimental technique could be useful in predicting the disease-related changes in heart valve mechanics. The information obtained from this work is valuable for refining the constitutive models that describe the essential microstructure-mechanics relationship.
Subject(s)
Aortic Valve , Elastin , Animals , Biomechanical Phenomena , Collagen , Stress, Mechanical , Swine , Weight-BearingABSTRACT
Approximately 1.6 million patients in the United States are affected by tricuspid valve regurgitation, which occurs when the tricuspid valve does not close properly to prevent backward blood flow into the right atrium. Despite its critical role in proper cardiac function, the tricuspid valve has received limited research attention compared to the mitral and aortic valves on the left side of the heart. As a result, proper valvular function and the pathologies that may cause dysfunction remain poorly understood. To promote further investigations of the biomechanical behavior and response of the tricuspid valve, this work establishes a parameter-based approach that provides a template for tricuspid valve modeling and simulation. The proposed tricuspid valve parameterization presents a comprehensive description of the leaflets and the complex chordae tendineae for capturing the typical three-cusp structural deformation observed from medical data. This simulation framework develops a practical procedure for modeling tricuspid valves and offers a robust, flexible approach to analyze the performance and effectiveness of various valve configurations using isogeometric analysis. The proposed methods also establish a baseline to examine the tricuspid valve's structural deformation, perform future investigations of native valve configurations under healthy and disease conditions, and optimize prosthetic valve designs.
ABSTRACT
Collagen fibers are the primary load-bearing microstructural constituent of bodily soft tissues, and, when subjected to external loading, the collagen fibers reorient, uncrimp, and elongate. Specific to the atrioventricular heart valve leaflets, the collagen fiber kinematics form the basis of many constitutive models; however, some researchers claim that modeling the affine fiber kinematics (AFK) are sufficient for accurately predicting the macroscopic tissue deformations, while others state that modeling the non-affine kinematics (i.e., fiber uncrimping together with elastic elongation) is required. Experimental verification of the AFK theory has been previously performed for the mitral valve leaflets in the left-side heart; however, this same evaluation has yet to be performed for the morphologically distinct tricuspid valve (TV) leaflets in the right-side heart. In this work, we, for the first time, evaluated the AFK theory for the TV leaflets using an integrated biaxial testing-polarized spatial frequency domain imaging device to experimentally quantify the load-dependent collagen fiber reorientations for comparison to the AFK theory predictions. We found that the AFK theory generally underpredicted the fiber reorientations by 3.1°, on average, under the applied equibiaxial loading with greater disparity when the tissue was subjected to the applied non-equibiaxial loading. Furthermore, increased AFK errors were observed with increasing collagen fiber reorientations (Pearson coefficient r = -0.36, equibiaxial loading), suggesting the AFK theory is better suited for relatively smaller reorientations. Our findings suggest the AFK theory may require modification for more accurate predictions of the collagen fiber kinematics in the TV leaflets, which will be useful in refining modeling efforts for more accurate TV simulations.