ABSTRACT
With regard to medical treatment through operations, remote control is possible, however, the area of remote-controllable drug treatment is yet to be established. In this study, a prototyped remote-controllable dosage management system that allows patients and caregivers to administer therapeutic drugs via an internet line without touching the dosage device or formulation was developed. This system consists of a transmitter (System A) located away from the patient, and a dosage device (System B) equipped with a receiver (B1), dosage management unit (B2), and a drug treatment unit (B3) that can be installed on the patient. Additionally, Bluetooth® is adopted to communicate from System A to System B. In the present study, System A was incorporated into a cell phone, and System B was a constant-current iontophoresis (IP) device, which was applied on excised pig skin. Sodium salt of betamethasone phosphate (BP-Na+) was selected as a model drug, and the in vitro skin permeation of BP- was evaluated. As a result, by transmitting the administration information incorporated in System A through B1 to B2, the optimal current was passed between the IP electrodes in B3, and the skin permeation of BP- was obtained by remote control. That is, the skin permeation of BP- was obtained by the current flowing from the IP device. The permeation amount decreased when the voltage load was stopped. These results suggested that remote control from System A enables dosing management of bioactive substances from dosage devices applied on the skin, intracutaneously, or subcutaneously without being near the patient. Although various trials are still required to complete the remote-controlled system, the patient does not have to go to the hospital except to take injections. Such drug administrations would lead to decreased medical expenses and increased quality of life for patients.
Subject(s)
Skin Absorption , Wearable Electronic Devices , Animals , Swine , Administration, Cutaneous , Iontophoresis/methods , Quality of Life , Skin/metabolism , Pharmaceutical Preparations/metabolismABSTRACT
The higher the frequency, the more complex the scattering, diffraction, multiple reflection, and interference that occur in practical applications such as radar-installed vehicles and transmitter-installed mobile modules, etc. Near-field measurement in "real situations" is important for not only investigating the origin of unpredictable field distortions but also maximizing the system performance by optimal placement of antennas, modules, etc. Here, as an alternative to the previous vector-network-analyzer-based measurement, we propose a new asynchronous approach that visualizes the amplitude and phase distributions of electric near-fields three-dimensionally without placing a reference probe at a fixed point or plugging a cable to the RF source to be measured. We demonstrate the visualization of a frequency-modulated continuous wave (FMCW) signal (24 GHz ± 40 MHz, modulation cycle: 2.5 ms), and show that the measured radiation patterns of a standard horn antenna agree well with the simulation results. We also demonstrate a proof-of-concept experiment that imitates a realistic situation of a bumper installed vehicle to show how the bumper alters the radiation patterns of the FMCW radar signal. The technique is based on photonics and enables measuring in the microwave to millimeter-wave range.
ABSTRACT
Near-field mapping has proven to be a powerful technique for characterizing and diagnosing antennas in the microwave frequency range. However, conventional measurement methods based on a network analyzer cannot be applied to on-chip antenna devices extensively studied for future wireless communication in the millimeter wave (mm-wave) (30-300 GHz) and terahertz (THz) wave (0.1-10 THz) frequency regions. Here, we present a new asynchronous mapping technique to investigate the spatial distribution of not only the amplitude but also the phase of the electric field generated by free-running, self-oscillating generators including CMOS oscillators, Gunn oscillators, resonant tunneling diodes, and quantum cascaded lasers. Using a photonic-electronic hybrid measurement system, a wide frequency coverage, minimal invasiveness of the field to be measured, and phase distribution measurements with a theoretically-limited sensitivity are simultaneously achieved. As a proof-of-concept experiment, we demonstrate the mapping of a mm-wave (77 GHz) generated by a free-running Gunn oscillator and antenna characterization based on near-to-far field transformation.