Electrolytic Hydrogen Release from Hydrogen Boride Sheets.

Solid-state hydrogen storage materials are safe and lightweight hydrogen carriers. Among the various solid-state hydrogen carriers, hydrogen boride (HB) sheets possess a high gravimetric hydrogen capacity (8.5 wt%). However, heating at high temperatures and/or strong ultraviolet illumination is required to release hydrogen (H2 ) from HB sheets. In this study, the electrochemical H2 release from HB sheets using a dispersion system in an organic solvent without other proton sources is investigated. H2 molecules are released from the HB sheets under the application of a cathodic potential. The Faradaic efficiency for H2 release from HB sheets reached >90%, and the onset potential for H2 release is -0.445 V versus Ag/Ag+ , which is more positive than those from other proton sources, such as water or formic acid, under the same electrochemical conditions. The total electrochemically released H2 in a long-time experiment reached ≈100% of the hydrogen capacity of HB sheets. The H2 release from HB sheets is driven by a small bias; thus, they can be applied as safe and lightweight hydrogen carriers with economical hydrogen release properties.

Rhombohedral boron monosulfide as a metal-free photocatalyst.

Most of previous photocatalysts contain metal species, thus exploring a metal-free photocatalyst is still challenging. A metal-free photocatalyst has an advantage for the development of economical and non-toxic artificial photosynthesis system and/or environmental purification applications. In this study, rhombohedral boron monosulfide (r-BS) was synthesized by a high-pressure solid-state reaction, and its photocatalytic properties were investigated. r-BS absorbed visible light, and its photocurrent action spectrum also exhibited visible light responsivity. The r-BS evolved hydrogen (H2) from water under ultraviolet (UV) as well as under visible light irradiation, and its internal quantum efficiency reached 1.8% under UV light irradiation. In addition to the H2 evolution reaction, the r-BS photocatalyst drove carbon dioxide (CO2) reduction and dye oxidation reactions under UV irradiation. Although bare r-BS was not so stable under strong light irradiation in water, cocatalyst modification improved its stability. These results indicate that r-BS is a new class of non-metal photocatalyst applicable for H2 production, CO2 reduction, and environmental purification reactions.

A prospective investigation of impacts of comorbid attention deficit hyperactivity disorder (ADHD) on clinical features and long-term treatment response in adult patients with obsessive-compulsive disorder (OCD).

BACKGROUND: A close association between obsessive-compulsive disorder (OCD) and attention-deficit/hyperactivity disorder (ADHD) in children and adolescents has been investigated in previous studies. However, few studies examined the relationship between lifetime comorbidity of ADHD and OCD in adults. Therefore, we sought to investigate the clinical and psychopathological features related to comorbid ADHD in Japanese adult patients with OCD. METHODS: We assessed lifetime comorbidity of ADHD in 93 adult Japanese patients with OCD. Additionally, we used the Japanese version of Conners' Adult ADHD Rating Scales to assess the characteristics and severity of ADHD in each participant. According to the results, we excluded OCD patients that did not have ADHD but who exhibited elevated levels of ADHD traits. We compared OCD patients with ADHD (ADHD+ group) and those without ADHD or its trait (ADHD- group) in terms of background profiles and clinical features, such as OCD symptomatology and psychometric test results. Additionally, the 6-month treatment outcome was compared prospectively between groups. RESULTS: Of the 93 OCD participants, the prevalence of lifetime comorbidity of ADHD was estimated as 16.1%. Compared with the ADHD- group, participants in the ADHD+ group had an earlier age of onset of OCD, higher frequencies of hoarding symptoms, higher levels of depressive and anxiety symptoms and lower quality of life, more elevated levels of impulsivity, and higher rates of substance or behavioral addiction and major depression. Finally, the mean improvement rate on the Yale-Brown Obsessive Compulsive Scale after 6 months of standardized OCD treatment in the ADHD+ group (16.1%) was significantly lower than that in the ADHD- group (44.6%). CONCLUSION: The lifetime comorbidity of ADHD is likely to exert a significant effect on clinical features and treatment outcome in adult patients with OCD. It is important to consider that underlying ADHD pathology may function as a facilitator for increased severity of global clinical features and treatment refractory conditions in OCD patients. Further studies are required to examine treatment strategies for such patients.

Development of Photothermal Catalyst from Biomass Ash (Bagasse) for Hydrogen Production via Dry Reforming of Methane (DRM): An Experimental Study.

Conventional hydrogen production, as an alternative energy resource, has relied on fossil fuels to produce hydrogen, releasing CO2 into the atmosphere. Hydrogen production via the dry forming of methane (DRM) process is a lucrative solution to utilize greenhouse gases, such as carbon dioxide and methane, by using them as raw materials in the DRM process. However, there are a few DRM processing issues, with one being the need to operate at a high temperature to gain high conversion of hydrogen, which is energy intensive. In this study, bagasse ash, which contains a high percentage of silicon dioxide, was designed and modified for catalytic support. Modification of silicon dioxide from bagasse ash was utilized as a waste material, and the performance of bagasse ash-derived catalysts interacting with light irradiation and reducing the amount of energy used in the DRM process was explored. The results showed that the performance of 3%Ni/SiO2 bagasse ash WI was higher than that of 3%Ni/SiO2 commercial SiO2 in terms of the hydrogen product yield, with hydrogen generation initiated in the reaction at 300 °C. Using the same synthesis method, the current results suggested that bagasse ash-derived catalysts had better performance than commercial SiO2-derived catalysts when exposed to an Hg-Xe lamp. This indicated that silicon dioxide from bagasse ash as a catalyst support could help improve the hydrogen yield while lowering the temperature in the DRM reaction, resulting in less energy consumption in hydrogen production.

Effective treatment of hydrogen boride sheets for long-term stabilization.

Two-dimensional hydrogen boride (HB) sheets prepared via the ion-exchange reaction from magnesium diboride (MgB2) are known to possess several intriguing properties for a wide range of applications; however, previous reports have shown that the sheets prepared using this method contain small amounts of reactive components, making them unsuitable for certain applications. Therefore, developing a method for preparing HB sheets that exhibit long-term stability and do not contain reactive species is essential. In this study, we developed an effective treatment method for achieving long-term stabilization of HB sheets. We found that by pre-treating the HB sheets with water and then filtering the dried product from an acetonitrile dispersion, we could achieve excellent long-term stability over nine months. This stability was maintained even outside of a glovebox, with no H2 released by the decomposition and/or reaction. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) absorption spectroscopy measurements revealed that the sample exhibited pure HB characteristics with negatively charged boron and B-H-B and terminal B-H bonds, even after nine months of storage. Furthermore, based on thermal desorption spectroscopy (TDS) measurements, the presence of reactive species in the as-prepared HB sheets is attributed to fluctuating B-H bonds with relatively weak binding energies that can be removed using the method developed in this study.

Nanophase-Separated Copper-Zirconia Composites for Bifunctional Electrochemical CO2 Conversion to Formic Acid.

A copper-zirconia composite having an evenly distributed lamellar texture, Cu#ZrO2, was synthesized by promoting nanophase separation of the Cu51Zr14 alloy precursor in a mixture of carbon monoxide (CO) and oxygen (O2). High-resolution electron microscopy revealed that the material consists of interchangeable Cu and t-ZrO2 phases with an average thickness of 5 nm. Cu#ZrO2 exhibited enhanced selectivity toward the generation of formic acid (HCOOH) by electrochemical reduction of carbon dioxide (CO2) in aqueous media at a Faradaic efficiency of 83.5% at -0.9 V versus the reversible hydrogen electrode. In situ Raman spectroscopy has revealed that a bifunctional interplay between the Zr4+ sites and the Cu boundary leads to amended reaction selectivity along with a large number of catalytic sites.

Accelerated Synthesis of Borophane (HB) Sheets through HCl-Assisted Ion-Exchange Reaction with YCrB4.

We present an enhanced method for synthesizing sheets of borophane. Despite the challenges associated with low efficiency, we discovered that incorporating hydrochloric acid into the ion-exchange reaction significantly improved the production yield from 20% to over 50%. After a thorough examination of the reaction, we gained insight into the underlying mechanisms and found that the use of hydrochloric acid provides two key benefits: accelerated production of borophene and isolation of high-purity products. This method has the potential to pave the way for the production of novel topological 2D materials with potential industrial applications.

Synthesis and Characterization of the Orthorhombic Sn3 O4 Polymorph.

An unexplored tin oxide crystal phase (Sn3 O4 ) was experimentally synthesized via a facile hydrothermal method. After tuning the often-neglected parameters for the hydrothermal synthesis, namely the degree of filling of the precursor solution and the gas composition in the reactor head space, an unreported X-ray diffraction pattern was discovered. Through various characterization studies, such as Rietveld analysis, energy dispersive X-ray spectroscopy, and first-principles calculations, this novel material was characterized as orthorhombic mixed-valence tin oxide with the composition SnII 2 SnIV O4 . This orthorhombic tin oxide is a new polymorph of Sn3 O4 , which differs from the reported conventional monoclinic structure. Computational and experimental analyses showed that orthorhombic Sn3 O4 has a smaller band gap (2.0 eV), enabling greater absorption of visible light. This study is expected to improve the accuracy of hydrothermal synthesis and aid the discovery of new oxide materials.

Rhombohedral Boron Monosulfide as a p-Type Semiconductor.

Two-dimensional materials have wide ranging applications in electronic devices and catalysts owing to their unique properties. Boron-based compounds, which exhibit a polymorphic nature, are an attractive choice for developing boron-based two-dimensional materials. Among them, rhombohedral boron monosulfide (r-BS) has recently attracted considerable attention owing to its unique layered structure similar to that of transition metal dichalcogenides and a layer-dependent bandgap. However, experimental evidence that clarifies the charge carrier type in the r-BS semiconductor is lacking. In this study, we synthesized r-BS and evaluated its performance as a semiconductor by measuring the Seebeck coefficient and photo-electrochemical responses. The properties unique to p-type semiconductors were observed in both measurements, indicating that the synthesized r-BS is a p-type semiconductor. Moreover, a distinct Fano resonance was observed in Fourier transform infrared absorption spectroscopy, which was ascribed to the Fano resonance between the E(2) (TO) phonon mode and electrons in the band structures of r-BS, indicating that the p-type carrier was intrinsically doped in the synthesized r-BS. These results demonstrate the potential future application prospects of r-BS.

Direct Interfacial Excitation from TiO2 to Cu(II) Nanoclusters Enables Cathodic Photoresponse for Hydrogen Evolution under Visible-Light Irradiation.

The titanium dioxide (TiO2 ) photocatalyst is only active under UV irradiation due to its wide-gap nature. A novel excitation pathway denoted as interfacial charge transfer (IFCT) has been reported to activate copper(II) oxide nanoclusters-loaded TiO2 powder (Cu(II)/TiO2 ) under visible-light irradiation for only organic decomposition (downhill reaction) so far. Here, the photoelectrochemical study shows that the Cu(II)/TiO2 electrode exhibits a cathodic photoresponse under visible-light and UV irradiation. It originates from H2 evolution on the Cu(II)/TiO2 electrode, while O2 evolution takes place on the anodic side. Based on the concept of IFCT, a direct excitation of electrons from the valence band of TiO2 to Cu(II) clusters initiates the reaction. This is the first demonstration of a direct interfacial excitation-induced cathodic photoresponse for water splitting without any addition of a sacrificial agent. This study is expected to contribute to the development of abundant visible-light-active photocathode materials for fuel production (uphill reaction).

Boosting Nitrogen Activation via Ag Nanoneedle Arrays for Efficient Ammonia Synthesis.

Electrocatalytic N2 reduction reaction (eNRR) provides a promising carbon-neutral and sustainable ammonia-synthesizing alternative to the Haber-Bosch process. However, the nonpolar N2 has significant thermodynamic stability and requires ultrahigh energy to break down the N≡N bond. Here, we report the construction of local enhanced electric fields (LEEFs) by Ag nanoneedle arrays to promote N≡N fracture thus assisting the eNRR. The LEEFs could induce charge polarization on nitrogen atoms and reduce the energy barrier in the N2 first-protonation step. The detected N─N and N─H intermediates prove the cleavage of the N≡N bond and the hydrogenation of N2 by LEEFs. The increased LEEFs lead to logarithmic growth rates for the targeted eNRR and exponential growth rates for the unavoidable competitive hydrogen evolution reaction. Thus, regulation and tuning of LEEFs to ∼4 × 104 kV m-1 endows the raise of eNRR to the summit, achieving high ammonia selectivity with a Faradaic efficiency of 72.3 ± 4.0%.

Bandgap widening through doping for improving the photocatalytic oxidation ability of narrow-bandgap semiconductors.

The trade-off relationship between narrowing the bandgap and achieving sufficient redox potentials accounts for the hindrance to the development of an efficient photocatalyst. Most of the previous researchers attempt to narrow the bandgap of semiconductors by impurity doping to achieve visible-light sensitivity, but this approach causes the losses of their oxidation and/or reduction ability. Conversely, this study presents a bandgap widening strategy by doping to improve the redox potential of photogenerated carriers. Employing first-principles simulations, we propose the lanthanum-doped bismuth vanadate (La-BiVO4) photocatalyst as a wider-bandgap semiconductor exhibiting stronger oxidation ability compared to pristine BiVO4, and the results revealed that the bismuth orbital in the valence band (VB) was diluted by lanthanum-ion doping, while the VB shifted to a higher potential (positively shifted). Thereafter, a La-BiVO4 powder was synthesized via a solid-state reaction, after which its activity was evaluated in the photocatalytic oxidation of 2-propanol (IPA). La-BiVO4 exhibited bandgap widening; thus, the number of absorbed photons under visible-light irradiation was lower than that of pristine BiVO4. However, the quantum efficiency (QE) of La-BiVO4 for the oxidation of IPA was higher than that of the pristine BiVO4. Consequently, the photocatalytic reaction rate of La-BiVO4 was superior to that of pristine BiVO4 under the same visible-light irradiation conditions. Although the bandgap of La-BiVO4 is widened, it is still sensitive to the cyan-light region, which is the strongest in the sunlight spectrum. These results demonstrate that the orbital dilution strategy by impurity elemental doping is effective for bandgap widening and contributes to improving the oxidation and/or reduction ability of the photogenerated charge carriers. This study elucidates the possibility of boosting photocatalytic performances via bandgap widening.

Highly Dispersed Ni Nanoclusters Spontaneously Formed on Hydrogen Boride Sheets.

Hydrogen boride (HB) sheets are two-dimensional materials comprising a negatively charged hexagonal boron network and positively charged hydrogen atoms with a stoichiometric ratio of 1:1. Herein, we report the spontaneous formation of highly dispersed Ni nanoclusters on HB sheets. The spontaneous reduction reaction of Ni ions by the HB sheets was monitored by in-situ measurements with an ultraviolet-visible spectrometer. Acetonitrile solutions of Ni complexes and acetonitrile dispersions of the HB sheets were mixed in several molar ratios (the HB:Ni molar ratio was varied from 100:0.5 to 100:20), and the changes in the absorbance were measured over time. In all cases, the results suggest that Ni metal clusters grow on the HB sheets, considering the increase in absorbance with time. The absorbance peak position shifts to the higher wavelength as the Ni ion concentration increases. Transmission electron microscopy images of the post-reaction products indicate the formation of Ni nanoclusters, with sizes of a few nanometers, on the HB sheets, regardless of the preparation conditions. These highly dispersed Ni nanoclusters supported on HB sheets will be used for catalytic and plasmonic applications and as hydrogen storage materials.

Ordered Ag Nanoneedle Arrays with Enhanced Electrocatalytic CO2 Reduction via Structure-Induced Inhibition of Hydrogen Evolution.

Silver is an attractive catalyst for converting CO2 into CO. However, the high CO2 activation barrier and the hydrogen evolution side reaction seriously limit its practical application and industrial perspective. Here, an ordered Ag nanoneedle array (Ag-NNAs) was prepared by template-assisted vacuum thermal-evaporation for CO2 electroreduction into CO. The nanoneedle array structure induces a strong local electric field at the tips, which not only reduces the activation barrier for CO2 electroreduction but also increases the energy barrier for the hydrogen evolution reaction (HER). Moreover, the array structure endows a high surface hydrophobicity, which can regulate the adsorption of water molecules at the interface and thus dynamically inhibit the competitive HER. As a result, the optimal Ag-NNAs exhibits 91.4% Faradaic efficiency (FE) of CO for over 700 min at -1.0 V vs RHE. This work provides a new concept for the application of nanoneedle array structures in electrocatalytic CO2 reduction reactions.

Inactivation of various variant types of SARS-CoV-2 by indoor-light-sensitive TiO2-based photocatalyst.

Photocatalysts are promising materials for solid-state antiviral coatings to protect against the spread of pandemic coronavirus disease (COVID-19). This paper reports that copper oxide nanoclusters grafted with titanium dioxide (CuxO/TiO2) inactivated the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus, including its Delta variant, even under dark condition, and further inactivated it under illumination with a white fluorescent bulb. To investigate its inactivation mechanism, the denaturation of spike proteins of SARS-CoV-2 was examined by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) and enzyme-linked immunosorbent assay (ELISA). In addition to spike proteins, fragmentation of ribonucleic acids in SARS-CoV-2 was investigated by real-time reverse transcription quantitative polymerase chain reaction (RT-qPCR). As a result, both spike proteins and RNAs in the SARS-CoV-2 virus were damaged by the CuxO/TiO2 photocatalyst even under dark condition and were further damaged under white fluorescent bulb illumination. Based on the present antiviral mechanism, the CuxO/TiO2 photocatalyst will be effective in inactivating other potential mutant strains of SARS-CoV-2. The CuxO/TiO2 photocatalyst can thus be used to reduce the infectious risk of COVID-19 in an indoor environment, where light illumination is turned on during the day and off during the night.

Accelerating CO2 Electroreduction to Multicarbon Products via Synergistic Electric-Thermal Field on Copper Nanoneedles.

Electrochemical CO2 reduction is a promising way to mitigate CO2 emissions and close the anthropogenic carbon cycle. Among products from CO2RR, multicarbon chemicals, such as ethylene and ethanol with high energy density, are more valuable. However, the selectivity and reaction rate of C2 production are unsatisfactory due to the sluggish thermodynamics and kinetics of C-C coupling. The electric field and thermal field have been studied and utilized to promote catalytic reactions, as they can regulate the thermodynamic and kinetic barriers of reactions. Either raising the potential or heating the electrolyte can enhance C-C coupling, but these come at the cost of increasing side reactions, such as the hydrogen evolution reaction. Here, we present a generic strategy to enhance the local electric field and temperature simultaneously and dramatically improve the electric-thermal synergy desired in electrocatalysis. A conformal coating of ∼5 nm of polytetrafluoroethylene significantly improves the catalytic ability of copper nanoneedles (∼7-fold electric field and ∼40 K temperature enhancement at the tips compared with bare copper nanoneedles experimentally), resulting in an improved C2 Faradaic efficiency of over 86% at a partial current density of more than 250 mA cm-2 and a record-high C2 turnover frequency of 11.5 ± 0.3 s-1 Cu site-1. Combined with its low cost and scalability, the electric-thermal strategy for a state-of-the-art catalyst not only offers new insight into improving activity and selectivity of value-added C2 products as we demonstrated but also inspires advances in efficiency and/or selectivity of other valuable electro-/photocatalysis such as hydrogen evolution, nitrogen reduction, and hydrogen peroxide electrosynthesis.

Vertical Cu Nanoneedle Arrays Enhance the Local Electric Field Promoting C2 Hydrocarbons in the CO2 Electroreduction.

Electrocatalytic reduction of CO2 to multicarbon products is a potential strategy to solve the energy crisis while achieving carbon neutrality. To improve the efficiency of multicarbon products in Cu-based catalysts, optimizing the *CO adsorption and reducing the energy barrier for carbon-carbon (C-C) coupling are essential features. In this work, a strong local electric field is obtained by regulating the arrangement of Cu nanoneedle arrays (CuNNAs). CO2 reduction performance tests indicate that an ordered nanoneedle array reaches a 59% Faraday efficiency for multicarbon products (FEC2) at -1.2 V (vs RHE), compared to a FEC2 of 20% for a disordered nanoneedle array (CuNNs). As such, the very high and local electric fields achieved by an ordered Cu nanoneedle array leads to the accumulation of K+ ions, which benefit both *CO adsorption and C-C coupling. Our results contribute to the design of highly efficient catalysts for multicarbon products.

Nanoporous ultra-high-entropy alloys containing fourteen elements for water splitting electrocatalysis.

High-entropy alloys (HEAs) are near-equimolar alloys comprising five or more elements. In recent years, catalysis using HEAs has attracted considerable attention across various fields. Herein, we demonstrate the facile synthesis of nanoporous ultra-high-entropy alloys (np-UHEAs) with hierarchical porosity via dealloying. These np-UHEAs contain up to 14 elements, namely, Al, Ag, Au, Co, Cu, Fe, Ir, Mo, Ni, Pd, Pt, Rh, Ru, and Ti. Furthermore, they exhibit high catalytic activities and electrochemical stabilities in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in acidic media, superior to that of commercial Pt/graphene and IrO2 catalysts. Our results offer valuable insights for the selection of elements as catalysts for various applications.

Exploring Molecular Mechanisms Involved in the Development of the Depression-Like Phenotype in Interleukin-18-Deficient Mice.

Interleukin-18 (IL-18) is an inflammatory cytokine that has been linked to energy homeostasis and psychiatric symptoms such as depression and cognitive impairment. We previously revealed that deficiency in IL-18 led to hippocampal abnormalities and resulted in depression-like symptoms. However, the impact of IL-18 deficiency on other brain regions remains to be clarified. In this study, we first sought to confirm that IL-18 expression in neural cells can be found in human brain tissue. Subsequently, we examined the expression of genes in the prefrontal cortex of Il18 -/- mice and compared it with gene expression in mice subjected to a chronic mild stress model of depression. Extracted genes were further analyzed using Ingenuity® Pathway Analysis, in which 18 genes common to both the chronic mild stressed model and Il18 -/- mice were identified. Of those, 16 were significantly differentially expressed between Il18+/+ and Il18 -/- mice. We additionally measured protein expression of α-2-HS-glycoprotein (AHSG) and transthyretin (TTR) in serum and the brain. In the prefrontal cortex of Il18 -/- mice, TTR but not AHSG was significantly decreased. Conversely, in the serum of Il18 -/- mice, AHSG was significantly increased but not TTR. Therefore, our results suggest that in IL-18-deficit conditions, TTR in the brain is one of the mediators causally related to depression, and AHSG in peripheral organs is one of the regulators inducing energy imbalance. Moreover, this study suggests a possible "signpost" to clarify the molecular mechanisms commonly underlying the immune system, energy metabolism, neural function, and depressive disorders.

Active site separation of photocatalytic steam reforming of methane using a gas-phase photoelectrochemical system.

Steam reforming of methane (SRM) requires high temperatures to be promoted, and the production of carbon dioxide from the side reaction has also become a problem. In this study, we separated the reaction sites for SRM to suppress CO2 generation using a gas-phase photoelectrochemical (GPEC) system with a cell coated with a Pt/YSZ powder catalyst on an oxygen ion-conductive YSZ pellet, where the reaction was assisted by light irradiation. As a result, SRM proceeded stoichiometrically and the production of CO2 was suppressed. We expect the findings obtained by the GPEC system will be useful in providing design guidelines for photocatalysts.