Delivery of external proteins into the cytoplasm using protein capsules modified with IgG on the surface, created from the amphiphilic two helix-bundle protein OLE-ZIP.

This study explores a new method for delivering therapeutic proteins into specific cells using OLE-ZIP capsules that present IgG. OLE-ZIP capsules is a spherical caspules prepared from amphihilic dimetic coiled-coil peptide, OLE-ZIP. Upon presenting cetuximab, these capsules showed preferential uptake in A431 cells and increased cytotoxicity when loaded with RNase A.

Design of Cell-Adhesive Shellac Derivatives and Endowment of Photoswitchable Cell-Adhesion Properties.

The emergence of new biodegradable cell-adhesion materials is an attractive topic in biomaterial chemistry, particularly for the development of cell incubation scaffolds and drug encapsulation materials used in in situ regenerative therapy. Shellac is a natural resin with unique film-forming properties and high miscibility with various chemicals, in addition to being biodegradable and nontoxic to biological systems. However, since native shellac does not adhere to mammalian cells, there have been no reports of using shellac to develop cell-adhesive biomaterials. In this study, we report on the development of cell-adhesive shellac derivatives through slight chemical modification. Shellac is a mixture of oligoesters that consists of hydroxyl fatty acids and resin acids, and therefore, all oligomers have one carboxylic acid group at the terminal. We discovered that a simple modification of hydrophobic chemical groups, particularly those containing aromatic groups in the ester form, could dramatically improve cell-adhesion properties for mammalian cells. Furthermore, by using photocleavable esters containing aromatic groups, we successfully endowed photoswitchable properties in cell adhesion. Given that shellac is a low-cost, biodegradable, and nontoxic natural resin, the modified shellacs have the potential to become new and attractive biomaterials applicable to in situ regenerative therapy.

Construction of the lactate-sensing fibremats by confining sensor fluorescent protein of lactate inside nanofibers of the poly(HPMA/DAMA)/ADH-nylon 6 core-shell fibremat.

The development of a new materials platform capable of sustaining the functionality of proteinous sensor molecules over an extended period without being affected by biological contaminants in living systems, such as proteases, is highly demanded. In this study, our primary focus was on fabricating new core-shell fibremats using unique polymer materials, capable of functionalizing encapsulated sensor proteins while resisting the effects of proteases. The core-fibre parts of core-shell fibremats were made using a newly developed post-crosslinkable water-soluble copolymer, poly(2-hydroxypropyl methacrylamide)-co-poly(diacetone methacrylamide), and the bifunctional crosslinking agent, adipic dihydrazide, while the shell layer of the nanofibers was made of nylon 6. Upon encapsulating the lactate-sensor protein eLACCO1.1 at the core-fibre part, the fibremat exhibited a distinct concentration-dependent fluorescence response, with a dynamic range of fluorescence alteration exceeding 1000% over the lactate concentration range of 0 to 100 mM. The estimated dissociation constant from the titration data was comparable to that estimated in a buffer solution. The response remained stable even after 5 cycles and in the presence of proteases. These results indicates that our core-shell fibremat platform could serve as effective immobilizing substrates for various sensor proteins, facilitating continuous and quantitative monitoring of various low-molecular-weight metabolites and catabolites in a variety of biological samples.

Core-shell fibremats comprising a poly(AM/DAAM)/ADH nanofibre core and nylon6 shell layer are an attractive immobilization platform for constructing immobilised enzymes.

Core-shell fibremats, comprising poly(acrylamide)-co-poly(diacetone-acrylamide)/adipic dihydrazide [poly(AM/DAAM)/ADH] core-nanofibres and hydrophobic polymer shell layers, are a new class of platforms for constructing various immobilised enzymes. In this study, to elucidate the impacts of the shell-layer material on fibremat properties and enzymatic activities, we synthesised core-shell fibremats with shell layers comprising nylon6 or acetyl cellulose (AcCel) instead of poly(ε-caprolactone) (PCL), as in our previous study. Transmission and scanning electron microscopy images revealed that the lactase-encapsulated poly(AM/DAAM)/ADH-nylon6 and -AcCel fibremats were both constructed like the poly(AM/DAAM)/ADH-PCL one. Leakage measurements of the beforehand loaded molecules inside the core-nanofibres revealed that both fibremats exhibited efficient permeability for low-molecular-weight molecules and stable retention of enzyme molecules inside the core-nanofibres. Meanwhile, the fibremats' mechanical properties considerably depended on the choice of shell-layer material. The thermal analyses of the lactase-encapsulated fibremats revealed residual water inside the core nanofibres. The core-shell fibremats fabricated with a nylon6 or PCL shell exhibited excellent enzymatic activities (102 and 114%, respectively, compared to that of free lactase), superior to that of the same amount of free enzyme in a buffer. Furthermore, both core-shell fibremats retained over 95% of their initial enzymatic activities, even after they were re-used 10 times.

Design of PG-Surfactants Bearing Polyacrylamide Polymer Chain to Solubilize Membrane Proteins in a Surfactant-Free Buffer.

The development of techniques capable of using membrane proteins in a surfactant-free aqueous buffer is an attractive research area, and it should be elucidated for various membrane protein studies. To this end, we examined a method using new solubilization surfactants that do not detach from membrane protein surfaces once bound. The designed solubilization surfactants, DKDKC12K-PAn (n = 5, 7, and 18), consist of two parts: one is the lipopeptide-based solubilization surfactant part, DKDKC12K, fand the other is the covalently connected linear polyacrylamide (PA) chain with different Mw values of 5, 7, or 18 kDa. Intermolecular interactions between the PA chains in DKDKC12K-PAn concentrated on the surfaces of membrane proteins via amphiphilic binding of the DKDKC12K part to the integral membrane domain was observed. Therefore, DKDKC12K-PAn (n = 5, 7, and 18) could maintain a bound state even after removal of the unbound by ultrafiltration or gel-filtration chromatography. We used photosystem I (PSI) from Thermosynecoccus vulcanus as a representative to assess the impacts of new surfactants on the solubilized membrane protein structure and functions. Based on the maintenance of unique photophysical properties of PSI, we evaluated the ability of DKDKC12K-PAn (n = 5, 7, and 18) as a new solubilization surfactant.

Development of Cell-Penetration PG-Surfactants and Its Application in External Peptide Delivery to Cytosol.

Recently, development of techniques to deliver pharmacologically active biomacromolecules such as peptides and proteins to cytosol has gained much interest. Here, we applied the peptide gemini (PG)-surfactants to a novel platform to design cell penetration lipopeptides (CP-PGs), which can deliver exogenous peptides and proteins to cytosol. Among the number of candidate CP-PGs having different peptide sequences at the X-, Y-, and Z-positions, we focused on those having two C12 alkyl chains appended to the side chain of two Cys residues, the betaine sequence -Asp-Lys-Asp-Lys- between the alkylated Cys residues (i.e., at the X-position), and having different cationic peptide sequences of oligo-Lys or oligo-Arg at the Y- and/or Z-positions. With respect to cytotoxicity for mammalian cells such as NIH3T3 cells upon 1 h exposure, those having (Lys)3 (K3-DKDKC12 and DKCK12-K3) showed lower cytotoxicity (IC50 = 241 and 198 µM) among those having oligo-Lys, (Lys)n (n = 1, 3, 5; IC50 = 88-197 µM). Similar lower cytotoxicity was also observed for the CP-PG having two (Lys)3 at both N- and C-terminal sides (K3-DKDKC12-K3) (IC50 = 225 µM). In contrast, the CP-PG having (Arg)3 at the N-terminal side (R3-DKDKC12) showed higher cytotoxicity (IC50 = 88 µM). Carrier abilities of the CP-PGs for exogenous peptides were evaluated using the proapoptotic domain (PAD) peptide, which induces apoptosis by disturbing mitochondrial membranes after delivery into cytosol. As a result, the CP-PGs of K3-DKDKC12, DKCK12-K3, K3-DKDKC12-K3, DKCK12-K5, and R3-DKDKC12 exhibited micromolar range carrier ability (the necessary half concentration to induce cell death (EC50) by delivering PAD peptide to cytosol was 10, 6.2, 8.5, 5.8, and 11.5 µM, respectively). Especially, the carrier abilities of DKCK12-K3 and DKCK12-K5 were superior to the well-established cell penetration Arg-rich R8 peptide (EC50 = 6.8 µM). Together, our results indicate that the PG-surfactant molecular framework could be a potential new platform to design efficient cell penetration carrier materials.

Development of New Antimicrobial Agents from Cationic PG-Surfactants Containing Oligo-Lys Peptides.

Peptide gemini-surfactant (PG-surfactant), a kind of lipopeptide, is composed of a short linker peptide (X) between two alkyl-chain-modified Cys residues and peripheral peptides at the N-terminal (Y) and the C-terminal (Z) sides, respectively, of the alkylated Cys residues. In this study, we developed and examined a series of PG-surfactants containing two C12 saturated alkanes and oligo-Lys, arranged at the X-, Y-, or Z-positions. To arrange oligo-Lys at the Y- or Z-positions, a repeat sequence of -Asp-Lys-Asp-Lys- was used at the X-position. All of the PG-surfactants exhibited high antimicrobial activity against both Gram-positive and -negative bacteria. In addition to high antimicrobial activity, a low hemolysis activity is prerequisite for efficient intravenous administration. Among the synthesized PG-surfactants, those having -(Lys)3- at the Y- or Z-positions, i.e. K3-DKDKC12 and DKDKC12K3, showed reasonably low hemolytic activities. This combination of high antimicrobial activity along with low hemolytic activity is an essential and unique property and has not been previously reported for the synthesized lipopeptides. Further, using scanning electron microscopy (SEM) and N-phenyl-1-naphthylamine (NPN) uptake assay we showed that the antimicrobial activity of these PG-surfactants may be attributed to membrane disruptive mechanisms. Although the PG-surfactants with low hemolytic activity could interact and localize onto red blood cell surfaces and cause slight expansion of cell morphologies, no subsequent penetration occurred. In summary, we describe here the successful development of PG-surfactants having high antibacterial and low hemolytic activity, thus providing a significant molecular platform to develop novel antimicrobial agents.

Construction of DNAzyme-Encapsulated Fibermats Using the Precursor Network Polymer of Poly(γ-glutamate) and 4-Glycidyloxypropyltrimethoxysilane.

Here, we developed functional nucleic acid (FNA)-encapsulated electrospun fibermats. To facilitate stable FNA encapsulation in the γ-PGA/GPTMS fibermats, we used the FNA as an FNA/streptavidin complex, and as a representative FNA, we selected a DNAzyme, the DNA/hemin complex, which is composed of G-quadraplex-forming single-stranded DNA and hemin and exhibits oxidation activity with the aid of a cocatalyst, H2O2. Scanning electron microscopy and Fourier-transform infrared spectroscopy measurements revealed that encapsulation of the DNA/hemin complex (∼1 wt % against the γ-PGA/GPTMS hybrid) in the nanofibers of the γ-PGA/GPTMS fibermats did not affect the structure of the original nanofibers. However, because a unique MW-dependent molecular permeability originated from the 3D network structure of the γ-PGA/GPTMS hybrid, low-MW substrates such as 4-aminoantipyrine, N-ethyl-N-(2-hydroxy-3-sulfopropyl)-3-methylaniline, and luminol were able to reach the encapsulated DNA/hemin complex by permeating to the inside of the nanofibers from an immersion buffer and then underwent catalytic oxidation. Conversely, nucleases, which are proteins featuring high MWs (>5 kDa), could not penetrate the γ-PGA/GPTMS nanofibers, and the encapsulated DNA/hemin complex was therefore effectively protected against nuclease digestion. Thus, encapsulating FNAs on the inside of the nanofibers of fibermats offers clear advantages for the practical application of FNAs in sensors and drugs, particularly for use in the in vivo circumstances.

Design of New Extraction Surfactants for Membrane Proteins from Peptide Gemini Surfactants.

The development of additional extraction surfactants for membrane proteins is necessary for membrane protein research, since optimal combinations for the successful extraction of target membrane proteins from biological membranes that minimize protein denaturation are hard to predict. In particular, those that have a unique basal molecular framework are quite attractive and highly desired in this research field. In this study, we successfully constructed a new extraction surfactant for membrane proteins, NPDGC12KK, from the peptide-gemini-surfactant (PG-surfactant) molecular framework. The PG-surfactant is a U-shaped lipopeptide scaffold, consisting of a short linker peptide (-X-) between two long alkyl-chain-modified Cys residues and a peripheral peptide (Y-) at the N-terminal side of long alkyl-chain-modified Cys residues. Using photosystem I (PSI) and photosystem II (PSII) derived from Thermosynecoccus vulcanus as representative membrane proteins, we evaluated whether NPDGC12KK could solubilize membrane proteins while maintaining structure and functions. Neither the membrane integral domain nor the cytoplasmic domain of PSI and PSII suffered any damage upon the use of NPDGC12KK based on detailed photophysical measurements. Using thylakoid membranes of T. vulcanus as a representative biological membrane sample, we performed experiments to extract membrane proteins, such as PSI and PSII. Based on the extraction efficiency and maintenance of protein supramolecular structure established using clear native-PAGE analyses, we proved that NPDGC12KK functions as a novel class of peptide-containing extraction surfactants for membrane proteins.

Construction and Characterization of Protein-Encapsulated Electrospun Fibermats Prepared from a Silica/Poly(γ-glutamate) Hybrid.

Protein-encapsulated fibermats are an attractive platform for protein-based bioactive materials. However, the choice of methods is still limited and not applicable to a wide range of proteins. In this study, we studied new polymeric materials for constructing protein-encapsulated fibermats, in which protein molecules are encapsulated within the nanofibers of fibermats without causing deleterious changes to protein structure or function. We constructed a protein-encapsulated fibermat using the poly(γ-glutamate) (PGA)/(3-glycidyloxypropyl)-trimethoxysilane (GPTMS) hybrid as a precursor for electrospinning. Because the PGA/GPTMS hybrid is water-soluble, protein molecules can be added to the precursor in an aqueous solution, significantly enhancing protein stability. Polycondensation during electrospinning (in-flight polycondensation) makes the obtained fibermats water-insoluble, which stabilizes the fibermat structure such that it is resistant to degradation in aqueous buffer. The molecular structure of the PGA/GPTMS hybrid gives rise to unique molecular permeability, which alters the selectivity and specificity of biochemical reactions involving the encapsulated enzymes; lower molecular-weight (MW) substrates can permeate the nanofibers, promoting enzyme activity, but higher MW substrates such as inhibitor peptides cannot permeate the nanofibers, suppressing enzyme activity. We present an effective method of encapsulating bioactive molecules while maintaining their structure and function, increasing the versatility of electrospun fibermats for constructing various bioactive materials.

Application of peptide gemini surfactants as novel solubilization surfactants for photosystems I and II of cyanobacteria.

We designed novel peptide gemini surfactants (PG-surfactants), DKDKC12K and DKDKC12D, which can solubilize Photosystem I (PSI) of Thermosynecoccus elongatus and Photosystem II (PSII) of Thermosynecoccus vulcanus in an aqueous buffer solution. To assess the detailed effects of PG-surfactants on the original supramolecular membrane protein complexes and functions of PSI and PSII, we applied the surfactant exchange method to the isolated PSI and PSII. Spectroscopic properties, light-induced electron transfer activity, and dynamic light scattering measurements showed that PSI and PSII could be solubilized not only with retention of the original supramolecular protein complexes and functions but also without forming aggregates. Furthermore, measurement of the lifetime of light-induced charge-separation state in PSI revealed that both surfactants, especially DKDKC12D, displayed slight improvement against thermal denaturation below 60 °C compared with that using ß-DDM. This degree of improvement in thermal resistance still seems low, implying that the peptide moieties did not interact directly with membrane protein surfaces. By conjugating an electron mediator such as methyl viologen (MV(2+)) to DKDKC12K (denoted MV-DKDKC12K), we obtained derivatives that can trap the generated reductive electrons from the light-irradiated PSI. After immobilization onto an indium tin oxide electrode, a cathodic photocurrent from the electrode to the PSI/MV-DKDKC12K conjugate was observed in response to the interval of light irradiation. These findings indicate that the PG-surfactants DKDKC12K and DKDKC12D provide not only a new class of solubilization surfactants but also insights into designing other derivatives that confer new functions on PSI and PSII.

Creation of cross-linked bilayer membranes that can incorporate membrane proteins from oligo-Asp-based peptide gemini surfactants.

We designed novel bilayer-forming amphiphiles based on the cyclic oligo-Asp-based peptide gemini (PG) surfactants cr-D2C12 and cr-D3C12, which consist of -Cys(Asp)nCys- (n = 2 or 3) as a core peptide and two Cys residues containing a dodecylamidomethyl group. Dynamic light scattering and transmission electron microscopy measurements revealed the formation of spherical bilayer membranes that could incorporate the light-harvesting antenna complex 2 (LH2) from Rhodopseudomonas acidophila . Furthermore, this proteoliposome-like conjugate could be assembled onto cationized glass and mica to form planar bilayer membranes incorporating LH2. Using atomic force microscopy, we observed LH2 protruding (ca. 1.2-1.5 nm) from flat terraces of the planar bilayer membranes formed from cr-D2C12 or cr-D3C12. Thus, our designed PG surfactants are a new class of bilayer-forming amphiphiles that may be applied to the study of various membrane proteins.

Molecular assembly of zinc chlorophyll derivatives by using recombinant light-harvesting polypeptides with His-tag and immobilization on a gold electrode.

LH1-α and -ß polypeptides, which make up the light-harvesting 1 (LH1) complex of purple photosynthetic bacteria, along with bacteriochlorophylls, have unique binding properties even for various porphyrin analogs. Herein, we used the porphyrin analogs, Zn-Chlorin and the Zn-Chlorin dimer, and examined their binding behaviors to the LH1-α variant, which has a His-tag at the C-terminus (MBP-rubα-YH). Zn-Chlorin and the Zn-Chlorin dimer could bind to MBP-rubα-YH and form a subunit-type assembly, similar to that from the native LH1 complex. These complexes could be immobilized onto Ni-nitrilotriacetic acid-modified Au electrodes, and the cathodic photocurrent was successfully observed by photoirradiation. Since Zn-Chlorins in this complex are too far for direct electron transfer from the electrode, a contribution of polypeptide backbone for efficient electron transfer was implied. These findings not only show interesting properties of LH1-α polypeptides but also suggest a clue to construct artificial photosynthesis systems using these peptide materials.

Overexpression of Rhodobacter sphaeroides PufX-bearing maltose-binding protein and its effect on the stability of reconstituted light-harvesting core antenna complex.

The PufX protein, encoded by the pufX gene of Rhodobacter sphaeroides, plays a key role in the organization and function of the core antenna (LH1)-reaction centre (RC) complex, which collects photons and triggers primary photochemical reactions. We synthesized a PufX/maltose-binding protein (MBP) fusion protein to study the effect of the PufX protein on the reconstitution of B820 subunit-type and LH1-type complexes. The fusion protein was synthesized using an Escherichia coli expression system and purified by affinity chromatography. Reconstitution experiments demonstrated that the MBP-PufX protein destabilizes the subunit-type complex (20°C), consistent with previous reports. Interestingly, however, the preformed LH1-type complex was stable in the presence of MBP-PufX. The MBP-PufX protein did not influence the preformed LH1-type complexes (4°C). The LH1-type complex containing MBP-PufX showed a unique temperature-dependent structural transformation that was irreversible. The predominant form of the complex at 4°C was the LH1-type. When shifted to 20°C, subunit-type complexes became predominant. Upon subsequent cooling back to 4°C, instead of re-forming the LH1-type complexes, the predominant form remained the subunit-type complexes. In contrast, reversible transformation of LH1 (4°C) and subunit-type complexes (20°C) occurs in the absence of PufX. These results are consistent with the suggestion that MBP-PufX interacts with the LH1α- polypeptide in the subunit (α/ß)-type complex (at 20°C), preventing oligomerization of the subunit to form LH1-type complexes.

The effect of the side chain length of Asp and Glu on coordination structure of Cu(2+) in a de novo designed protein.

Metal ions in proteins are important not only for the formation of the proper structures but also for various biological activities. For biological functions such as hydrolysis and oxidation, metal ions often adopt unusual coordination structures. We constructed a stable scaffold for metal binding to create distorted metal coordination structures. A stable four stranded alpha-helical coiled-coil structure was used as the scaffold, and the metal binding site was in the cavity created at the center of the structure. Two His residues and one Asp or Glu residue were used to coordinate the metal ions, AM2D and AM2E, respectively. Cu(2+) bound to AM2D with an equatorial planar coordination structure with two His, one Asp, and H(2)O as detected by electron spin resonance and UV spectral analyzes. On the other hand, Cu(2+) had a slightly distorted square planar structure when it bound two His and Glu in AM2E, due to the longer side-chain of the Glu residue as compared to the Asp residue. Computational analysis also supported the distorted coordination structure of Cu(2+) in AM2E. This construct should be useful to create various coordinations of metal ions for catalytic functions.

Organic ligand binding by a hydrophobic cavity in a designed tetrameric coiled-coil protein.

The design and characterization of a hydrophobic cavity in de novo designed proteins provides a wide range of information about the functions of de novo proteins. We designed a de novo tetrameric coiled-coil protein with a hydrophobic pocketlike cavity. Tetrameric coiled coils with hydrophobic cavities have previously been reported. By replacing one Leu residue at the a position with Ala, hydrophobic cavities that did not flatten out due to loose peptide chains were reliably created. To perform a detailed examination of the ligand-binding characteristics of the cavities, we originally designed two other coiled-coil proteins: AM2, with eight Ala substitutions at the adjacent a and d positions at the center of a bundled structure, and AM2W, with one Trp and seven Ala substitutions at the same positions. To increase the association of the helical peptides, each helical peptide was connected with flexible linkers, which resulted in a single peptide chain. These proteins exhibited CD spectra corresponding to superhelical structures, despite weakened hydrophobic packing. AM2W exhibited binding affinity for size-complementary organic compounds. The dissociation constants, K(d), of AM2W were 220 nM for adamantane, 81 microM for 1-adamantanol, and 294 microM for 1-adamantaneacetic acid, as measured by fluorescence titration analyses. Although it was contrary to expectations, AM2 did not exhibit any binding affinity, probably due to structural defects around the designed hydrophobic cavity. Interestingly, AM2W exhibited incremental structure stability through ligand binding. Plugging of structural defects with organic ligands would be expected to facilitate protein folding.

Regulation of protein-protein interaction via assembly of coiled-coil domain.

The protein-protein interaction presides the various biological events in life. Toward the understanding of their functions and networks, various techniques to regulate the specific protein functions are developed and applied so far. Here we examined the novel method to regulate the protein-protein interactions via coiled-coil assembly.

Construction of a pH-responsive artificial membrane fusion system by using designed coiled-coil polypeptides.

In many viruses, pH-responsive coiled-coil domains in the specific fusion proteins play important roles in membrane fusion and the infection of viruses into host cells. To investigate the relationship between the conformational change of the coiled coil and the fusion process, we have introduced a de novo designed polypeptide as a model system of the coiled-coil domain. This system enables the systematic study of the dynamics of pH-responsive coiled-coil polypeptide-membrane interactions. First, we designed and synthesized pH-responsive isoleucine-zipper triple-stranded coiled-coil polypeptides. Then the relationship between the pH-induced conformational change of the polypeptide and the membrane's interactive properties was studied by physicochemical methods. Structural changes in the designed polypeptides were examined by means of circular dichroism measurements. And finally, the behavior of the membrane fusion was investigated by leakage of liposomal contents, turbidity analysis, dynamic light scattering, and lipid mixing experiments. Our data show that coiled-coil formation under acidic pH conditions enhances polypeptide-induced membrane fusion. The results in this study demonstrate that an artificial membrane fusion system can be constructed on a molecular level by the use of a pH-responsive isoleucine-zipper triple-stranded coiled-coil polypeptide.

Metal-ion-dependent GFP emission in vivo by combining a circularly permutated green fluorescent protein with an engineered metal-ion-binding coiled-coil.

Coordination of metal ions significantly contributes to protein structures and functions. Here we constructed a fusion protein, consisting of a de novo designed, metal-ion-binding, trimeric coiled-coil and a circularly permutated green fluorescent protein (cpGFP), where the fluorescent emission from cpGFP was induced by metal ion coordination to the coiled-coil. A circularly permutated GFP, (191)cpGFP(190), was constructed by connecting the original N- and C-termini of GFP(UV) by a GGSGG linker and cleaving it between Asp(190) and Gly(191). The metal-ion-binding coiled-coil, IZ-HH, was designed to have three alpha-helical structures, with 12 His residues in the hydrophobic core of the coiled-coil structure. IZ-HH exhibited an unfolded structure, whereas it formed the trimeric coiled-coil structure in the presence of divalent metal ions, such as Cu(2+), Ni(2+), or Zn(2+). The fusion protein (191)cpGFP(190)-IZ-HH was constructed, in which (191)cpGFP(190) was inserted between the second and third alpha-helices of IZ-HH. Escherichia coli cells, expressing (191)cpGFP(190)-IZ-HH, exhibited strong fluorescence when the Cu(2+) and Zn(2+) ions were present in the medium, indicating that they passed through the cell membrane and induced the proper folding of the (191)cpGFP(190) domain. This strategy, in which protein function is regulated by a metal-ion-responsive coiled-coil, should be applicable to the design of various metal-ion-responsive, nonnatural proteins that work both in vitro and in vivo.

Activating an enzyme by an engineered coiled coil switch.

We designed a de novo protein based on a circular permutant of RNaseT1, in which the enzymatic activity can be manipulated by engineered peptide binding. The circular permutant of RNaseT1 was obtained by tethering the original C- and N-termini with a GPAG linker and cleaving the molecule between Glu82 and Asn83. This mutant lacked enzymatic activity, due to the destabilization of entire protein structure. We previously reported the construction of ABC-type heterotrimeric coiled coil peptides, in which the A- and B-type peptides cannot form the folded trimeric structure without the C-type peptide. The introduction of the A- and B-type coiled coil peptides to the C- and N-termini of the circular permutant of RNaseT1, respectively, and the subsequent addition of the C-type coiled coil peptide enabled the RNaseT1 domain to refold properly, thus, restoring the enzymatic activity. The formation of the trimeric coiled coil structure should bring the cleaved sites of RNaseT1 close enough to refold the RNaseT1 domain spontaneously.