Ambient Processed rGO/Ti3CNTx MXene Thin Film with High Oxidation Stability, Photosensitivity, and Self-Cleaning Potential.

Solution-based processing offers advantages for producing thin films due to scalability, low cost, simplicity, and benignity to the environment. Here, we develop conductive and photoactivated self-cleaning reduced graphene oxide (rGO)/Ti3CNTx MXene thin films via spin coating under ambient conditions. The addition of a thin rGO layer on top of Ti3CNTx resulted in up to 45-fold improvement in the environmental stability of the film compared to the bare Ti3CNTx film. The optimized rGO/Ti3CNTx thin film exhibits an optical transmittance of 74% in the visible region of the spectrum and a sheet resistance of 19 kΩ/sq. The rGO/Ti3CNTx films show high rhodamine B discoloration activity upon light irradiation. Under UV irradiation, the electrically conductive MXene in combination with in situ formed semiconducting titanium oxide induces photogenerated charge carriers, which could potentially be used in photocatalysis. On the other hand, due to film transparency, white light irradiation can bleach the adsorbed dye via photolysis. This study opens the door for using MXene thin films as multifunctional coatings with conductive and potentially self-cleaning properties.

Perspectives of 2D MXene Tribology.

The large and rapidly growing family of 2D early transition metal carbides, nitrides, and carbonitrides (MXenes) raises significant interest in the materials science and chemistry of materials communities. Discovered a little more than a decade ago, MXenes have already demonstrated outstanding potential in various applications ranging from energy storage to biology and medicine. The past two years have witnessed increased experimental and theoretical efforts toward studying MXenes' mechanical and tribological properties when used as lubricant additives, reinforcement phases in composites, or solid lubricant coatings. Although research on the understanding of the friction and wear performance of MXenes under dry and lubricated conditions is still in its early stages, it has experienced rapid growth due to the excellent mechanical properties and chemical reactivities offered by MXenes that make them adaptable to being combined with other materials, thus boosting their tribological performance. In this perspective, the most promising results in the area of MXene tribology are summarized, future important problems to be pursued further are outlined, and methodological recommendations that could be useful for experts as well as newcomers to MXenes research, in particular, to the emerging area of MXene tribology, are provided.

Combination of High pH and an Antioxidant Improves Chemical Stability of Two-Dimensional Transition-Metal Carbides and Carbonitrides (MXenes) in Aqueous Colloidal Solutions.

MXenes, a large family of two-dimensional (2D) transition-metal carbides/nitrides, have attracted increased attention in recent years because of their excellent electronic, mechanical, thermal, and optical properties. Studying chemical properties of MXenes is important to prolong the shelf life of their colloids and provide robust performance of MXenes in devices and applications. While the role of MXene reactivity with the environment, including water and components of air, is becoming more recognized, less is known about the role of parameters influencing the reactivity. In this work, we investigate the individual and combined effects of the pH and antioxidant on chemical stability of Ti2CTx, Ti3CNTx, and Ti3C2Tx MXenes using GC, XPS, UV-vis, and Raman spectroscopy. In contrast to indirect indicators of MXene degradation, such as film conductivity or performance in electrochemical energy storage systems, we focus on detection of reaction products as the most sensitive and direct way of monitoring the chemical transformations of MXenes. Based on our knowledge of MXene chemistry and interactions with the environment, we propose a combination of sodium hydroxide and sodium l-ascorbate to effectively slow down degradation of MXenes in colloidal solutions by suppressing their hydrolysis and oxidation reactions, respectively.

Ultrasmall Nanodiamonds: Perspectives and Questions.

Nanodiamonds are at the heart of a plethora of emerging applications in areas ranging from nanocomposites and tribology to nanomedicine and quantum sensing. The development of alternative synthesis methods, a better understanding, and the availability of ultrasmall nanodiamonds of less than 3 nm size with a precisely engineered composition, including the particle surface and atomic defects in the diamond crystal lattice, would mark a leap forward for many existing and future applications. Yet today, we are unable to accurately control nanodiamond composition at the atomic scale, nor can we reliably create and isolate particles in this size range. In this perspective, we discuss recent advances, challenges, and opportunities in the synthesis, characterization, and application of ultrasmall nanodiamonds. We particularly focus on the advantages of bottom-up synthesis of these particles and critically assess the physicochemical properties of ultrasmall nanodiamonds, which significantly differ from those of larger particles and bulk diamond.

Adhesion Between MXenes and Other 2D Materials.

MXenes, a large family of two-dimensional (2D) early transition metal carbides and nitrides, have excellent electrical and electrochemical properties, which can also be explored in assemblies with other 2D materials, like graphene and transition metal dichalcogenides (TMDs), creating heterostructures with unique properties. Understanding the interaction mechanism between 2D materials is critical for the design and manipulation of these 2D heterostructures. Our previous work investigated the interaction between SiO2 and two MXenes (Ti3C2Tx and Ti2CTx). However, no experimental research has been done on MXene interlayer interactions and interactions in MXene heterostructures. Here, we used atomic force microscopy (AFM) with SiO2 tip and Ti3C2Tx and Ti2CTx MXene-coated tips, respectively, to measure the adhesion energies of graphene, MoSe2, Ti3C2Tx, and Ti2CTx MXene with other 2D materials. The measured adhesion energies show that only the interfaces involving graphene demonstrate dependence on the number of material monolayers in a stack. Comparing 40 interacting pairs of 2D materials, the lowest adhesion energy (∼0.27 J/m2) was found for the interfaces involving MoSe2 and the highest adhesion energy was observed for the interfaces involving Ti3C2Tx (∼1.23 J/m2). The obtained set of experimental data for 2D interfaces involving MXenes provides a basis for a future in-depth understanding of adhesive mechanisms at interfaces between 2D materials, which is an important topic for the design of 2D heterostructures with controlled interfacial strength and properties.

Explosive Fragmentation of Luminescent Diamond Particles.

Development of efficient and cost-effective mass-production techniques for size reduction of high- pressure, high-temperature (HPHT) diamonds with sizes from tens to hundreds of micrometers remains one of the primary goals towards commercial production of fluorescent submicron and nanodiamond (fND). fNDs offer great advantages for many applications, especially in labelling, tracing, and biomedical imaging, owing to their brightness, exceptional photostability, mechanical robustness and intrinsic biocompatibility. This study proposes a novel processing method utilizing explosive fragmentation that can potentially be used for the fabrication of submicron to nanoscale size fluorescent diamond particles. In the proposed method, synthetic HPHT 20 pm and 150 pm microcystalline diamond particles containing color centers are rapidly fragmented in conditions of high explosive detonation. X-ray diffraction and Raman spectroscopy show that the detonation fragmented diamond particles consist of good quality submicron diamonds of ~420-800 nm in size, while fluorescence spectroscopy shows photoluminescence spectra with noticeable changes for large (150 µm) starting microcrystalline diamond particles, and no significant changes in photoluminescence properties for smaller (20 µm) starting microcrystalline diamond particles. The proposed detonation method shows potential as an efficient, cost effective, and industrially scalable alternative to milling for the fragmentation of fluorescent diamond microcrystals into submicron- to nano-size domain.

Understanding Chemistry of Two-Dimensional Transition Metal Carbides and Carbonitrides (MXenes) with Gas Analysis.

MXenes, a large family of two-dimensional materials that are intensely investigated for a broad range of applications, are unstable in water, spontaneously forming TiO2. Several hypotheses have been proposed recently to explain the transformations of MXenes in aqueous environments based on characterization of solid products and measurements of solution pH. However, no studies of the gaseous products of these reactions have been reported. In this work, we demonstrate the use of Raman spectroscopy and gas chromatography techniques to study the gaseous reaction products of Ti2C, Ti3C2, Ti3CN, and Nb2C MXenes in aqueous environments. Based on the analysis of gases, the reactivities of MXenes with different monolayer thickness and chemical composition have been analyzed. We demonstrate the analysis of gases produced during MXene transformations as a powerful technique that can be used for better understanding of their nontrivial chemistry.

Dynamical Control over Terahertz Electromagnetic Interference Shielding with 2D Ti3C2Ty MXene by Ultrafast Optical Pulses.

High electrical conductivity and strong absorption of electromagnetic radiation in the terahertz (THz) frequency range by metallic 2D MXene Ti3C2Ty make it a promising material for electromagnetic interference shielding, THz detectors, and transparent conducting electrodes. Here, we demonstrate that ultrafast optical pulses with wavelengths straddling the visible range (400 and 800 nm) induce transient broad-band THz transparency in the MXene that persists for nanoseconds. We demonstrate that optically induced transient THz transparency is independent of temperature from 95 to 290 K. This discovery opens new possibilities for development of switchable electromagnetic interference shielding materials and devices that can be rendered partially transparent on demand for transmitting THz signals, or for designing new THz devices such as sensitive optically gated detectors.

Effect of Nanodiamond Surface Chemistry on Adsorption and Release of Tiopronin.

Tiopronin is an FDA-approved thiol drug currently used to treat cystinuria and rheumatoid arthritis. However, due to its antioxidant properties, it may be beneficial in a variety of other conditions. One primary obstacle to its wider application is its limited bioavailability, which necessitates administration of high systemic doses to achieve localized therapeutic effects. Incorporation of a drug delivery vehicle can solve this dilemma by providing a means of controlled, targeted release. Functionalized nanodiamond is a promising theranostic platform that has demonstrated great potential for biomedical applications, including drug delivery. Design of nanodiamond theranostic platforms requires comprehensive understanding of drug-platform interactions, and the necessary physical chemical investigations have only been realized for a limited number of compounds. Towards the long-term goal of developing a nanodiamond-tiopronin treatment paradigm, this study aims to shed light on the effects of nanodiamond surface chemistry on adsorption and release of tiopronin. Specifically, adsorption isotherms were measured and fit to Langmuir and Freundlich models for carboxylated, hydroxylated, and aminated nanodiamonds, and release was monitored in solutions at pH 4.0, 5.8, 7.3, and 8.1. Our results indicate that aminated nanodiamonds exhibit the highest loading capacity while hydroxylated nanodiamonds are the most effective for sustained release. Therefore, a high degree of flexibility may be afforded by the use of nanodiamonds with different surface chemistries optimized for specific applications.

Adhesion of two-dimensional titanium carbides (MXenes) and graphene to silicon.

Two-dimensional transition metal carbides (MXenes) have attracted a great interest of the research community as a relatively recently discovered large class of materials with unique electronic and optical properties. Understanding of adhesion between MXenes and various substrates is critically important for MXene device fabrication and performance. We report results of direct atomic force microscopy (AFM) measurements of adhesion of two MXenes (Ti3C2Tx and Ti2CTx) with a SiO2 coated Si spherical tip. The Maugis-Dugdale theory was applied to convert the AFM measured adhesion force to adhesion energy, while taking into account surface roughness. The obtained adhesion energies were compared with those for mono-, bi-, and tri-layer graphene, as well as SiO2 substrates. The average adhesion energies for the MXenes are 0.90 ± 0.03 J m-2 and 0.40 ± 0.02 J m-2 for thicker Ti3C2Tx and thinner Ti2CTx, respectively, which is of the same order of magnitude as that between graphene and silica tip.

Hydrolysis of 2D Transition-Metal Carbides (MXenes) in Colloidal Solutions.

Although oxidation was deemed as the main factor responsible for the instability of MXenes in aqueous colloids, here we put forward and test a hypothesis about the central role of water as the primary factor. We show that water and related processes of MXene hydrolysis play the main role in the phenomena leading to complete transformations of 2D titanium carbide MXenes into titania in aqueous environments. To demonstrate the role of water, the stability of two MXenes, Ti3C2T x and Ti2CT x, has been systematically studied in aqueous and nonaqueous colloids exposed to oxygen and inert gas atmospheres. The calculated time constant for degradation of Ti3C2T x dispersed in anhydrous iso-propanol saturated with pure oxygen exceeds 5 years, in striking contrast to the same MXene dispersed in water, where more than a half of it would transform into titania even in an oxygen-less atmosphere over ∼41 days. A thinner Ti2CT x MXene showed similar behavior, albeit with shorter time constants in both solvents, correspondingly. UV-vis and Raman spectroscopy were used to analyze the oxidation kinetics and composition of fresh and aged MXenes. An intense anatase peak was observed in MXenes stored in aqueous solutions under Ar atmosphere, while no signs of oxidation could be found in iso-propanol solutions of the MXenes stored under O2 atmosphere over a similar period of time.

Environment-Sensitive Photoresponse of Spontaneously Partially Oxidized Ti3C2 MXene Thin Films.

A large family of two-dimensional transition metal carbides and nitrides (MXenes) has increasingly raised interest for electronic and optoelectronic applications due to their high electrical conductivity, potentially tunable electronic structure, nonlinear optical properties, and ability to be manufactured in the thin film state. During delamination and storage in ambient air environment, spontaneous oxidation of MXene flakes leads to formation of titanium oxide, a process that, as we demonstrate here, can be harnessed for manufacturing MXene-titania composites for optoelectronics, sensing, and other applications. We show that partially oxidized MXene thin films containing the in situ formed phase of titanium oxide have a significant photoresponse in the UV region of the spectrum. The relaxation process of photoexcited charge carriers takes a long time (∼24 h) but can be accelerated in the presence of oxygen and water vapor in the atmosphere. These properties of spontaneously formed MXene-titania thin films make them attractive materials for photoresistors with memory effect and sensitivity to the environment, as well as many other photo- and environment-sensing applications.

Saturable Absorption in 2D Ti3 C2 MXene Thin Films for Passive Photonic Diodes.

MXenes comprise a new class of 2D transition metal carbides, nitrides, and carbonitrides that exhibit unique light-matter interactions. Recently, 2D Ti3 CNTx (Tx represents functional groups such as OH and F) was found to exhibit nonlinear saturable absorption (SA) or increased transmittance at higher light fluences, which is useful for mode locking in fiber-based femtosecond lasers. However, the fundamental origin and thickness dependence of SA behavior in MXenes remain to be understood. 2D Ti3 C2 Tx thin films of different thicknesses are fabricated using an interfacial film formation technique to systematically study their nonlinear optical properties. Using the open aperture Z-scan method, it is found that the SA behavior in Ti3 C2 Tx MXene arises from plasmon-induced increase in the ground state absorption at photon energies above the threshold for free carrier oscillations. The saturation fluence and modulation depth of Ti3 C2 Tx MXene is observed to be dependent on the film thickness. Unlike other 2D materials, Ti3 C2 Tx is found to show higher threshold for light-induced damage with up to 50% increase in nonlinear transmittance. Lastly, building on the SA behavior of Ti3 C2 Tx MXenes, a Ti3 C2 Tx MXene-based photonic diode that breaks time-reversal symmetry to achieve nonreciprocal transmission of nanosecond laser pulses is demonstrated.

Graphene-Based Materials for the Fast Removal of Cytokines from Blood Plasma.

There is a range of medical conditions, which include acute organ failure, bacterial and viral infection, and sepsis, that result in overactivation of the inflammatory response of the organism and release of proinflammatory cytokines into the bloodstream. Fast removal of these cytokines from blood circulation could offer a potentially efficient treatment of such conditions. This study aims at the development and assessment of novel biocompatible graphene-based adsorbents for blood purification from proinflammatory cytokines. These graphene-based materials were chosen on the basis of their surface accessibility for small molecules further facilitated by the interlayer porosity, which is comparable to the size of the cytokine molecules to be adsorbed. Our preliminary results show that graphene nanoplatelets (GnP) exhibit high adsorption capacity, but they cannot be used in direct contact with blood due to the risk of small carbon particle release into the bloodstream. Granulation of GnP using poly(tetrafluoroethylene) as a binder eliminated an undesirable nanoparticle release without affecting the GnP surface accessibility for the cytokine molecules. The efficiency of proinflammatory cytokine removal was shown using a specially designed flow-through system. So far, GnP proved to be among the fastest acting and most efficient sorbents for cytokine removal identified to date, outperforming porous activated carbons and porous polymers.

Effect of Surface Chemistry on the Fluorescence of Detonation Nanodiamonds.

Detonation nanodiamonds (DNDs) have unique physical and chemical properties that make them invaluable in many applications. However, DNDs are generally assumed to show weak fluorescence, if any, unless chemically modified with organic molecules. We demonstrate that detonation nanodiamonds exhibit significant and excitation-wavelength-dependent fluorescence from the visible to the near-infrared spectral region above 800 nm, even without the engraftment of organic molecules to their surfaces. We show that this fluorescence depends on the surface functionality of the DND particles. The investigated functionalized DNDs, produced from the same purified DND as well as the as-received polyfunctional starting material, are hydrogen, hydroxyl, carboxyl, ethylenediamine, and octadecylamine-terminated. All DNDs are investigated in solution and on a silicon wafer substrate and compared to fluorescent high-pressure high-temperature nanodiamonds. The brightest fluorescence is observed from octadecylamine-functionalized particles and is more than 100 times brighter than the least fluorescent particles, carboxylated DNDs. The majority of photons emitted by all particle types likely originates from non-diamond carbon. However, we locally find bright and photostable fluorescence from nitrogen-vacancy centers in diamond in hydrogenated, hydroxylated, and carboxylated detonation nanodiamonds. Our results contribute to understanding the effects of surface chemistry on the fluorescence of DNDs and enable the exploration of the fluorescent properties of DNDs for applications in theranostics as nontoxic fluorescent labels, sensors, nanoscale tracers, and many others where chemically stable and brightly fluorescent nanoparticles with tailorable surface chemistry are needed.

Biomedical applications of nanodiamond (Review).

The interest in nanodiamond applications in biology and medicine is on the rise over recent years. This is due to the unique combination of properties that nanodiamond provides. Small size (∼5 nm), low cost, scalable production, negligible toxicity, chemical inertness of diamond core and rich chemistry of nanodiamond surface, as well as bright and robust fluorescence resistant to photobleaching are the distinct parameters that render nanodiamond superior to any other nanomaterial when it comes to biomedical applications. The most exciting recent results have been related to the use of nanodiamonds for drug delivery and diagnostics-two components of a quickly growing area of biomedical research dubbed theranostics. However, nanodiamond offers much more in addition: it can be used to produce biodegradable bone surgery devices, tissue engineering scaffolds, kill drug resistant microbes, help us to fight viruses, and deliver genetic material into cell nucleus. All these exciting opportunities require an in-depth understanding of nanodiamond. This review covers the recent progress as well as general trends in biomedical applications of nanodiamond, and underlines the importance of purification, characterization, and rational modification of this nanomaterial when designing nanodiamond based theranostic platforms.

The adsorption of tetracycline and vancomycin onto nanodiamond with controlled release.

The unique properties and tailorable surface of detonation nanodiamonds have given rise to an abundance of potential biomedical applications. Very little is known about the details of adsorption/desorption equilibria of drugs on/from nanodiamonds with different purity, surface chemistry, and agglomeration state. The studies presented here delve into the details of adsorption and desorption of tetracycline (TET) and vancomycin (VAN) on nanodiamond, which are critically important for the rational design of the nanodiamond drug delivery systems. The nanodiamonds studied in these experiments were as-received (ND), purified and carboxyl terminated (ND-COOH), and aminated (ND-NH2). The monolayer capacities of the drugs loaded onto the nanodiamonds are reported herein using Langmuir and Freundlich isotherm models. The results from the desorption studies demonstrate that, by changing the pH environment of drug loaded nanodiamond using buffers of pH 4.09, 7.45, 8.02, and a phosphate buffered saline (PBS) solution, the drug release can effectively be triggered.

Tuning Endothelial Permeability with Functionalized Nanodiamonds.

Cancer nanomedicine vehicles are required to cross the vascular barrier to reach the tumor site in order to ensure the successful delivery of their therapeutic load. Here, nanodiamond (ND) variants were shown to induce surface dependent vascular barrier leakiness. The ND-induced leakiness was found to be mediated by the increase in intracellular reactive oxygen species (ROS) and Ca(2+). These then in turn triggered the loss in endothelial cell-endothelial cell connections of the vascular barrier and also triggered their quasi-stable cytoskeletal remodelling. This ND driven increase in leakiness allowed more doxorubicin drug to penetrate through the vascular barrier to reach the cancer cells. This increase in the doxorubicin penetration subsequently led to an increase in the cancer killing effect. Overall, tuning the vascular barrier leakiness through ND surface group functionalization could provide an alternative strategy for the cancer nanomedicine to traverse across the vascular barrier.

Boron nitride colloidal solutions, ultralight aerogels and freestanding membranes through one-step exfoliation and functionalization.

Manufacturing of aerogels and membranes from hexagonal boron nitride (h-BN) is much more difficult than from graphene or graphene oxides because of the poor dispersibility of h-BN in water, which limits its exfoliation and preparation of colloidal solutions. Here, a simple, one-step mechano-chemical process to exfoliate and functionalize h-BN into highly water-dispersible, few-layer h-BN containing amino groups is presented. The colloidal solutions of few-layer h-BN can have unprecedentedly high concentrations, up to 30 mg ml(-1), and are stable for up to several months. They can be used to produce ultralight aerogels with a density of 1.4 mg cm(-3), which is ∼1,500 times less than bulk h-BN, and freestanding membranes simply by cryodrying and filtration, respectively. The material shows strong blue light emission under ultraviolet excitation, in both dispersed and dry state.

Molecular dynamic study of the mechanical properties of two-dimensional titanium carbides Ti(n+1)C(n) (MXenes).

Two-dimensional materials beyond graphene are attracting much attention. Recently discovered 2D carbides and nitrides (MXenes) have shown very attractive electrical and electrochemical properties, but their mechanical properties have not been characterized yet. There are neither experimental measurements reported in the literature nor predictions of strength or fracture modes for single-layer MXenes. The mechanical properties of two-dimensional titanium carbides were investigated in this study using classical molecular dynamics. Young's modulus was calculated from the linear part of strain-stress curves obtained under tensile deformation of the samples. Strain-rate effects were observed for all Tin+1Cn samples. From the radial distribution function, it is found that the structure of the simulated samples is preserved during the deformation process. Calculated values of the elastic constants are in good agreement with published DFT data.