The effect of particle shape on discharge and clogging.

Granular flow is common across different fields from energy resource recovery and mineral processing to grain transport and traffic flow. Migrating particles may jam and form arches that span constrictions and hinder particle flow. Most studies have investigated the migration and clogging of spherical particles, however, natural particles are rarely spherical, but exhibit eccentricity, angularity and roughness. New experiments explore the discharge of cubes, 2D crosses, 3D crosses and spheres under dry conditions and during particle-laden fluid flow. Variables include orifice-to-particle size ratio and solidity. Cubes and 3D crosses are the most prone to clogging because of their ability to interlock or the development of face-to-face contacts that can resist torque and enhance bridging. Spheres arriving to the orifice must be correctly positioned to create stable bridges, while flat 2D crosses orient their longest axes in the direction of flowlines across the orifice and favor flow. Intermittent clogging causes kinetic retardation in particle-laden flow even in the absence of inertial effects; the gradual increase in the local particle solidity above the constriction enhances particle interactions and the probability of clogging. The discharge volume before clogging is a Poisson process for small orifice-to-particle size ratio; however, the clogging probability becomes history-dependent for non-spherical particles at large orifice-to-particle size ratio and high solidities, i.e., when particle-particle interactions and interlocking gain significance.

Hardness of Polycrystalline Wurtzite Boron Nitride (wBN) Compacts.

Wurtzite boron nitride (wBN), due to its superior properties and many potential practical and scientific applications, such as ideal machining/cutting/milling ferrous and carbide materials, especially as an ideal dielectric substrate material for optical, electronic, and 2-D graphene-based devices, has recently attracted much attention from both academic and industrial fields. Despite decades of research, there is an ongoing debate about if the single-phase wBN is harder than diamond because of the difficulty to make pure wBN material. Here we report the successful synthesis of pure single-phase polycrystalline wurtzite-type boron nitride (wBN) bulk material by using wBN powder as a starting material with a well-controlled process under ultra-high pressure and high temperature. The cubic boron nitride (cBN) was also successfully prepared for the first time from wBN starting material for comparison and verification. The X-ray diffraction (XRD) and TEM clearly confirmed that a pure single-phase wBN compact was produced. The microstructure and mechanical properties including Vickers hardness, fracture toughness, and thermal stability for the pure single-phase wBN was first evaluated.

Downhole Applications of Magnetic Sensors.

In this paper we present a review of the application of two types of magnetic sensors-fluxgate magnetometers and nuclear magnetic resonance (NMR) sensors-in the oil/gas industry. These magnetic sensors play a critical role in drilling wells safely, accurately and efficiently into a target reservoir zone by providing directional data of the well and acquiring information about the surrounding geological formations. Research into magnetic sensors for oil/gas drilling has not been explored by researchers to the same extent as other applications, such as biomedical, magnetic storage and automotive/aerospace applications. Therefore, this paper aims to serve as an opportunity for researchers to truly understand how magnetic sensors can be used in a downhole environment and to provide fertile ground for research and development in this area. A look ahead, discussing other magnetic sensor technologies that can potentially be used in the oil/gas industry is presented, and what is still needed in order deploy them in the field is also addressed.