Physiochemical and mechanical characterisation of orthodontic 3D printed aligner material made of shape memory polymers (4D aligner material).

OBJECTIVES: To conduct a physiochemical and mechanical material analysis on 3D printed shape-memory aligners in comparison to thermoformed aligners. MATERIALS AND METHODS: Four materials were examined, including three thermoformed materials: CA Pro (CP), Zendura A (ZA), Zendura FLX (ZF), and one 3D printed material: Tera Harz (TC-85). Rectangular strips measuring 50 × 10 × 0.5 mm were produced from each material. Five tests were conducted, including differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), shape recovery tests, three-points bending (3 PB), and Vickers surface microhardness (VH). RESULTS: DSC recorded glass transition temperatures (Tg) at 79.9 °C for CP, 92.2 °C for ZA, 107.1 °C for ZF, and 42.3 °C for TC-85. In DMA analysis at 20-45 °C, a prominent decrease in storage modulus was observed, exclusively for TC-85, as the temperature increased. Notably, within the temperature range of 30-45 °C, TC-85 exhibited substantial shape recovery after 10 min, reaching up to 86.1 %, while thermoformed materials showed minimal recovery (1.5-2.9 %). In 3 PB test (at 30, 37, 45 °C), ZA demonstrated the highest force at 2 mm bending, while TC-85 exhibited the lowest. Regarding VH at room temperature, there was a significant decrease for both ZA and ZF after thermoforming. ZA had the highest hardness, followed by ZF and TC-85, with CP showing the lowest values. CONCLUSIONS: TC-85 demonstrates exceptional shape memory at oral temperature, improving adaptation, reducing force decay, and enabling, together with its higher flexibility, extensive tooth movement per step. Additionally, it maintains microhardness similar to thermoformed sheets, ensuring the durability and effectiveness of dental aligners. CLINICAL RELEVANCE: The 3D printed aligner material with shape memory characteristics (4D aligner) has revolutionized the orthodontic aligner field. It showed mechanical properties more suitable for orthodontic treatment than thermoforming materials. Additionally, it offers enhanced control over aligner design and thickness, while optimizing the overall workflow. It also minimizes material wastage, and reduces production expenses.

Effects of GnRHa and hCG with or without dopamine receptor antagonists on the spawning efficiency of African catfish (Clarias gariepinus) reared in hatchery conditions.

Optimization of artificial reproduction is essential for minimizing genetic diversity, especially when fish are captured from their natural habitats and spawned in controlled conditions. In the present study, there was evaluation of the effects of gonadotropin-releasing hormone analogue (GnRHa) and human chorionic gonadotropin (hCG) with or without dopamine receptor antagonists such as domperidone (DOM) and metoclopramide (MET) on the spawning efficiency of African catfish (Clarias gariepinus) reared in captivity. The control group was intramuscularly (IM) injected with 1 mL of sterile saline solution. The fish specimens of the other six groups were injected IM with GnRHa or hCG, or in combination with either DOM or MET. None of the specimens had ovulations in the control group. There was the longest latency period in specimens treated with only GnRHa or hCG. There were the largest egg mass weight, fecundity, and hatchability (%) in specimens of the GnRHa + MET group. These findings indicate that GnRHa or hCG combined with dopamine receptor antagonists such as DOM and MET resulted in a marked enhancement of ovulation rate and increased the egg mass, fecundity, and hatchability of the treated C. gariepinus, and the values when there was inclusion of the MET treatment exceeded those when there was treatment with DOM.

Effect of bone marrow mesenchymal stem cells on healing of temporomandibular joints in rats with induced rheumatoid arthritis.

The healing capacity of bone marrow mesenchymal stem cells (BMMSCs) has been evaluated in various studies. This study aimed to evaluate the effect of BMMSCs on the healing of temporomandibular joints (TMJs) with induced rheumatoid arthritis. Fifty healthy male Sprague Dawley rats were divided into three groups: group I (n = 10), negative control; group II (n = 20), positive control (induction of arthritis by adjuvant followed by intravenous injection of 0.1 ml of PBS); and group III (n = 20), intervention (as for group II but injected intravenously with 1 × 106  cells ml-1 of BMMSCs suspended in PBS). Half of the rats in each group were euthanized 3 wk after the start of the experiment and the other half was euthanized after 5 wk. Group I revealed normal TMJ features. Group II showed thickening of disc, thinning of cartilage, disordered bone trabeculae, and decreased in mean % area staining positive of collagen fibers at 3 wk, while at 5 wk these effects were more aggravated. Group III showed nearly normal thickness of disc and condylar cartilage, nearly normal arrangement of bone trabeculae and regenerated collagen fibers at 3 wk, while after 5 wk the TMJ features were almost normal. Two-way anova revealed statistically significant differences between groups. Thus, treatment of induced rheumatoid arthritis with BMMSCs shows promising results that need to be further investigated in humans.

Interplay between vitamin D status and antiviral therapy among chronic hepatitis C Egyptian patients.

Vitamin D has been shown to play an important immunomodulatory role; deficiency of vitamin D has been recently associated to the lack of response to antiviral therapy in chronic hepatitis C patients. This study evaluated the interrelationship between serum level of vitamin D and early response to antiviral therapy in Egyptian patients with chronic HCV infection. A total of 45 patients with chronic HCV infection who received antiviral treatment (Pegylated interferon and Ribavirin), their vitamin D serum level was assessed once at the start of treatment and 12 weeks later, when the EVR was determine by Quantitative HCV-RNA by PCR. The results showed that vitamin D status has no correlation with viral load and hepatitis activity by biopsy and without significant association between vitamin D deficiency and the antiviral therapy response. However, there was significance improvement in level of vitamin D after 12 weeks of receiving the antiviral therapy of HCV.