Photocatalytic degradation of Acid Red 18 by synthesized AgCoFe2O4@Ch/AC: Recyclable, environmentally friendly, chemically stable, and cost-effective magnetic nano hybrid catalyst.

Chitosan (Ch) is a linear biodegradable natural carbohydrate polymer and the most appealing biopolymer, such as low-cost biodegradability, biocompatibility, hydrophilicity, and non-toxicity. In this case, Ch was utilized to synthesize AgCoFe2O4@Ch/Activated Carbon (AC) by the modified microwave-assisted co-precipitation method. The physical and chemical structure of magnetic nanocomposites was analyzed and characterized by Field Emission Scanning Electron Microscope (FESEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Energy Dispersive Spectroscopy (EDS), Diffuse Reflection Spectroscopy (DRS), Value stream mapping (VSM), Fourier transform spectroscopy (FTIR) and BET. The effects of various parameters on the removal of dye (Acid Red18), including catalyst dose, dye concentration, pH, and time were studied. Results showed that the highest removal efficiencies were 96.68 % and 84 % for the synthetic sample and actual wastewater, respectively, in optimal conditions (pH: 3, the initial dye concentration: 10 mgL-1, the catalyst dose: 0.14 gL-1, time: 50 min). Mineralization, according to the COD analysis, was 89.56 %. Photocatalytic degradation kinetics of Acid Red 18 followed pseudo-first order and Langmuir-Hinshelwood with constants of kc = 0.12 mg L-1 min-1 and KL-H = 0.115 Lmg-1. Synthesized photocatalytic AgCoFe2O4@Ch/AC showed high stability and after five recycling cycles was able to remove the pollutant with an efficiency of 85.6 %. So, the synthesized heterogenous magnetic nanocatalyst AgCoFe2O4@Ch/AC was easily recycled from aqueous solutions and it can be used in the removal of dyes from industries with high efficiency.

Evaluation of the concentration and human health risk of nitrate and potentially toxic elements (PTEs) in melons from a southern region of Iran: Identification of pollution sources.

Decentralized agriculture, improper monitoring of cultivation conditions, and leaching of contaminants into lands led to the contamination of crops with various potentially toxic elements (PTEs). However, it is essential to know more about the profile level and associated risk of these contaminants and their origin, especially in high-water content crops. This study aimed to investigate the concentration of PTEs in melons of one of Iran's southern cities and follow that health risk assessment in the target population for the first time. Results of the present study confirmed that although the mean concentration of some metals was lower than the safety standard (Cr: 4.6 ± 2 mg/kg and Pb: 7.4 ± 4 mg/kg), their nutritional value was unfavorable regarding some micronutrients (Cu: 88.8 ± 27 mg/kg and Zn: 480 ± 275 mg/kg). The highest metal concentration in cantaloupe was iron (1706.47 mg/kg, p-value<0.05), and nitrate concentration in all melon types was 2.59-524.54 mg/kg (p-value<0.05). Principal component analysis (PCA) with K-means clustering and the Positive Matrix Factorization (PMF) model have shown that contaminants in melons originated from human activities. So, excessive use of agricultural fertilizers is a possible source of nitrates in melons, which have 93 % of factor loading values. The health risk assessment also showed that melons' carcinogenic and non-carcinogenic risk using the deterministic method was lower than the permissible limit (HQ < 1, ILCR 1 in the children group for the 95th percentile. Furthermore, the level of certainty in the carcinogenesis risk for children, women, and men was estimated at 86.48 %, 64.67 %, and 61.30 %, respectively. Also, the consumption rate was determined as the most important parameter in the sensitivity analysis. As a consequence, there is a potential health risk for Iranians after the consumption of melon due to PTEs and nitrate levels that also originated from anthropogenic sources.

Assessing water quality index and health risk using deterministic and probabilistic approaches in Darab County, Iran; A machine learning for fluoride prediction.

The present study employed deterministic and probabilistic approaches to determine the Water Quality Index (WQI) and assess health risks associated with water consumption in Darab County, Iran. Additionally, pollution levels were predicted using a machine-learning algorithm. The study's findings indicate that certain physicochemical parameters of water in some locations exceeded permissible limits (WHO or EPA), with 79.00 % of total hardness (TH) and 21.74 % of Total dissolved solids (TDS) levels exceeding standard values. The WQI for drinking water was determined to be 94.56 % using the deterministic approach, and 98.4 % of samples included the excellent and good categories according to the WQI classification system using the probabilistic approach. Fluoride (F) exhibited the most substantial impact on WQI values. The Artificial Neural Network (ANN) analysis findings suggest that the pH, nitrate (NO3), and TDS are the most significant factors affecting the prediction of F concentration in water. Multivariate analysis demonstrated that anthropogenic, especially agriculture and geogenic factors, contributed to the water quality in this area. The health risk assessment (HRA) using deterministic methods revealed that water consumption posed a relatively high risk in certain areas. However, Monte Carlo simulation demonstrated that the 5th and 95th percentiles of Hazard Index (HI) for children, teenagers, and adults were within limits of (0.14-2.38), (0.09-1.29), and (0.10-1.00) respectively, with a certainty level of 70 %, 91 %, and 95 %. Interactive indices revealed that the intake of IR and NO3-IR in children, BW and F-BW in teenagers, and NO3 and NO3-IR in adults significantly impacted health risks. Based on these findings, augmenting water treatment processes, regulating fluoride concentrations, and advocating for sustainable agricultural practices complemented by continuous monitoring is imperative.

Application of montmorillonite/octadecylamine nanoparticles in the removal of textile dye from aqueous solutions: Modeling, kinetic, and equilibrium studies.

In the study, the proliferation of industries has been associated with an increase in the production of industrial wastewater and subsequent environmental pollution, wherein dyes emerge as prominent pollutants. The characteristics of nanoclay modified with octadecylamine, were elucidated throughvarious techniques, including Field Emission Scanning Electron Microscopy/Energy Dispersive Spectroscopy (FE-SEM/EDS), Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), X-ray Diffraction (XRD), and Brunauer-Emmett-Teller Surface Area Analysis (BET). The research delved into the impact of variables such as pH, initial dye concentration, adsorbent dose, temperature, and ultrasonication time on the removal of Acid Black 1 (AB1) through an ultrasonic process, employing a central composite design (CCD). Optimal conditions for the adsorption process were determined: pH at 5.46, adsorbent mass at 4 mg/30 mL, initial dye concentration at 20 mg/L, ultrasound time at 20 min, and temperature at 50 °C, resulting in a remarkable 96.49% adsorption efficiency. The fitting of experimental equilibrium data to different isotherm models, including Langmuir, Freundlich, and Temkin, indicated thatthe Freundlich model was the most suitable. Analysis of the adsorption data with various kinetic models such as pseudo-first and second-order models, and intraparticle diffusion models, revealed the applicability of the second-order equation model. A thermodynamic study unveiled that the adsorption process was spontaneous and endothermic. In conclusion, the study highlights the significant capability ofmontmorillonite nanoclay modified with octadecylamine in removing AB1 dye, rendering it a viable option for wastewater treatment.

An effective magnetic nanobiocomposite: Preparation, characterization and its application for adsorption removal of P-nitroaniline from aquatic environments.

In this investigation, a magnetic nanobiocomposite, denoted as CoFe2O4/Activated Carbon integrated with Chitosan (CoFe2O4/AC@Ch), was synthesized based on a microwave-assisted for the efficacious adsorption of P-nitroaniline (PNA). The physicochemical properties of the said nano biocomposite were thoroughly characterized using a suite of analytical methodologies, namely FESEM/EDS, BET, FTIR, XRD, and VSM. The results confirm the successful synthesis of the nanobiocomposite, with its point of zero charge (pHZPC) determined to be 6.4. Adsorptive performance towards PNA was systematically examined over a spectrum of conditions, encompassing variations in PNA concentration (spanning 10-40 mg/L), adsorbent concentration (10-200 mg/L), contact periods (2.5-22.5 min), and solution pH (3-11). Upon optimization, the conditions converged to an adsorbent concentration of 200 mg/L, pH 5, PNA concentration of 10 mg/L, and a contact duration of 22.5 min, under which an impressive PNA adsorption efficacy of 98.6% was attained. Kinetic and isotherm analyses insinuated the adsorption mechanism to adhere predominantly to the pseudo-second-order kinetic and Langmuir isotherm models. The magnetic nanocomposite was recovered and used in 4 cycles, and the absorption rate reached 86%, which shows the good stability of the magnetic nanocomposite in wastewater treatment. Conclusively, these empirical outcomes underscore the viability of the formulated magnetic nanobiocomposite as a potent, recyclable adsorbent for the proficient extraction of PNA from aqueous matrices.

Dispersion of SO2 emissions in a gas refinery by AERMOD modeling and human health risk: a case study in the Middle East.

This study aimed to model the dispersion of emitted SO2 from stacks and flares in one of the largest Gas Refinery Companies in the Middle East . Pollutant emission coefficients and air pollution's various sources contributions were determined based on the collected data after measuring SO2 concentrations in a fixed monitoring station (stack) and across different distances from it for a year. The SO2 release pattern was simulated, and annual pollutant concentrations in average periods of 1-hr and 24-hr were predicted using AERMOD 8.9.0. The maximum simulated ambient SO2 were 27,447 and 4592 µg/m3 in average sampling times of 1-hr and 24-hr, respectively. The hazard quotient of 95% percentile for children, teenagers, and adults due to inhalation of SO2 was more than one.The maximum concentration of SO2 in the 1-hour and 24-hour period in the study area was higher than the amount introduced by Iran's clean air standard and the WHO standard.

Nitrate concentrations and health risks in cow milk from Iran: Insights from deterministic, probabilistic, and AI modeling.

Excessive nitrate consumption has been linked to potential health risks in humans. Thus, understanding nitrate levels in staple foods such as cow milk can provide insights into their health implications. This study meticulously examined nitrate concentrations in 70 cow milk samples from traditional and industrialized cattle farming systems in Fars province, Iran. A combination of deterministic modeling, a probabilistic approach, and six artificial intelligence algorithms was employed to determine health risk assessments. The data disclosed average nitrate concentrations of 32.63 mg/L in traditional farming and 34.95 mg/L in industrialized systems, presenting no statistically significant difference (p > 0.05). The Hazard Quotient (HQ) was deployed to gauge potential health threats, underscoring heightened vulnerability in children, who exhibited HQ values ranging from 0.05 to 0.58 (mean = 0.19) in contrast to adults, whose values spanned 0.01 to 0.16 (mean = 0.05). Monte Carlo simulations enriched the risk assessment, demarcating the 5th and 95th percentile nitrate concentrations for children at 0.07 and 0.39, respectively. In children, pivotal interactions that influenced HQ encompassed those between nitrate concentration and consumption rate, as well as nitrate concentration and body weight. The interplay between nitrate concentration and consumption rate was most consequential for the adult cohort. Among the algorithms assessed for HQ prediction, Gaussian Naive Bayes (GNB) was optimal for children and eXtreme Gradient Boosting (XGB) for adults, with nitrate concentration being a key determinant. The results underscore the imperative for rigorous oversight of milk nitrate concentrations, highlighting the enhanced susceptibility of children and emphasizing the need for preventive strategies and enlightened consumption.

Nitrates in industrial and traditional tomato paste from Arsenjan City, Iran: a health risk assessment study.

A comprehensive approach was used for the first time to measure NO3- risk in tomato paste consumption; besides a robust deterministic and probabilistic method was used. The mean levels of NO3- in homemade and industrial tomato paste were 7.36 mg/kg and 43.69 mg/kg, respectively. The Monte Carlo simulation confirmed that these values were below normal levels (HQ less than 1). The sensitivity analysis displayed that FIR was the main factor affecting the risk to human health in both groups. The interactive plot demonstrated the interaction between C and IR for children and adults in both types of tomato paste. This study concludes that NO3- ingestion due to tomato paste consumption poses no significant health risk. However, considering that food and water constitute the primary sources of NO3- intake, continuous monitoring is recommended due to potential health risks associated with excessive NO3- consumption, including certain forms of cancer.

Green synthesis of sustainable magnetic nanoparticles Fe3O4 and Fe3O4-chitosan derived from Prosopis farcta biomass extract and their performance in the sorption of lead(II).

The sustainable processes are now in tremendous demand for nanomaterial synthesis as a result of their unique properties and characteristics. The magnetic nanoparticles comprised of Fe3O4 and its conjugate with abundant and renewable biopolymer, chitosan, were synthesized using Prosopis farcta biomass extract, and the resulting materials were used to adsorb Pb (II) from aqueous solution. Thermodynamic parameters revealed that the sorption of lead (II) on Fe3O4 as well as Fe3O4-Chitosan (Fe3O4-CS) has been an endothermic and self-regulating procedure wherein the sorption kinetics was defined by a pseudo-second-order pattern and the sorption isotherms corresponded to the Freundlich pattern. A multivariable quadratic technique for adsorption process optimization was implemented to optimize the lead (II) adsorption on Fe3O4 and Fe3O4-chitosan nanoparticles, the optimal conditions being pH 7.9, contact time of 31.2 min, initial lead concentration of 39.2 mg/L, adsorbent amount of 444.3 mg, at a 49.7 °C temperature. The maximum adsorption efficiencies under optimal conditions were found to be 69.02 and 89.54 % for Fe3O4 and Fe3O4-CS adsorbents, respectively. Notably, Fe3O4 and Fe3O4-CS can be easily recovered using an external magnet, indicating that they are a viable and cost-effective lead removal option.

Comprehensive health risk analysis of heavy metal pollution using water quality indices and Monte Carlo simulation in R software.

Rapid urbanization, population growth, agricultural practices, and industrial activities have led to widespread groundwater contamination. This study evaluated heavy metal contamination in residential drinking water in Shiraz, Iran (2021). The analysis involved 80 groundwater samples collected across wet and dry seasons. Water quality was comprehensively assessed using several indices, including the heavy metals evaluation index (HEI), heavy metal pollution index (HPI), contamination degree (CD), and metal index (MI). Carcinogenic and non-carcinogenic risk assessments were conducted using deterministic and probabilistic approaches for exposed populations. In the non-carcinogenic risk assessment, the chronic daily intake (CDI), hazard quotient (HQ), and hazard index (HI) are employed. The precision of risk assessment was bolstered through the utilization of Monte Carlo simulation, executed using the R software platform. Based on the results, in both wet and dry seasons, Zinc (Zn) consistently demonstrates the highest mean concentration, followed by Manganese (Mn) and Chromium (Cr). During the wet and dry seasons, 25% and 40% of the regions exhibited high CD, respectively. According to non-carcinogenic risk assessment, Cr presents the highest CDI and HQ in children and adults, followed by Mn, As and HI values, indicating elevated risk for children. The highest carcinogenic risk was for Cr in adults, while the lowest was for Cd in children. The sensitivity analysis found that heavy metal concentration and ingestion rate significantly impact both carcinogenic and non-carcinogenic risks. These findings provide critical insights for shaping policy and allocating resources towards effectively managing heavy metal contamination in residential drinking water.

Modeling, quality assessment, and Sobol sensitivity of water resources and distribution system in Shiraz: A probabilistic human health risk assessment.

Given water's vital role in supporting life and ecosystems, global climate change and human activities have significantly diminished its availability and quality. This study explores the health risks of drinking water consumption in the shiraz county water resources and distribution system. The result showed that the water was slightly alkaline. However, the average pH values during the study were within the permissible range. The area's abundance of total hardness and calcium was due to the high concentration of minerals in rocks and soils. The nitrate and fluoride concentrations in drinking groundwater varied from 0.02 to 116.70 mg/L and 0.10-1.85 mg/L, respectively. Although the water quality index indicated that 52.63, 45.03, and 20.3 percent of samples were of excellent, good, and poor quality in 2020, those percentages obtained 46.05, 52.09, and 14.0 percent in 2021. The regression values of training, testing, validation, and the proposed artificial neural network model were 0.93, 0.92, 0.85, and 0.92. The maximum levels of hazard quotient of nitrate and fluoride (except for adults) were higher than 1 in all age groups, indicating a high non-carcinogenic risk by exposure to nitrate. Furthermore, according to the Monte Carlo simulation, the 95th percentile hazard index in all groups was more than 1. Children and infants were more inclined towards risk than teens and adults based on the intake of nitrate and fluoride from drinking water. The Sobol sensitivity reflected that the nitrate concentration and ingestion rate are vital parameters that influence the outcome of the oral exposure model for all age groups. The interaction of ingestion rate with a concentration of nitrate and fluoride is an important parameter affecting the health risk assessment. In conclusion, these findings suggest that precise measures can reduce health risks and guarantee safe drinking water for residents of Shiraz County.

Probabilistic human health risk assessment and Sobol sensitivity reveal the major health risk parameters of aluminum in drinking water in Shiraz, Iran.

Overuse of aluminum salts (a.k.a., alum) in coagulation and flocculation processes in water treatment raises concerns about increased levels of aluminum (Al) in drinking water. In this study, we present a probabilistic human health risk assessment (HRA) for non-cancerogenic risks, with Sobol sensitivity analysis, to vet the concern of increased health risk from Al in drinking water in Shiraz, Iran, for children, adolescents, and adults. The results show that the concentration of Al in the drinking water in Shiraz varies significantly between winter and summer seasons and varies considerably spatially across the city irrespective of the season. However, all concentrations are below the guideline concentration. The HRA results show that the highest health risk is for children in summer, and the lowest is for adolescents and adults during winter, with generally higher health risks for younger age groups. However, Monte Carlo results for all age groups suggest no adverse health effects due to Al exposure. The sensitivity analysis shows that the sensitive parameters vary across age groups. For example, the Al concentration and ingestion rate pose the most risk for adolescent and adult groups, and children group, respectively. More importantly, the interaction of Al concentration with ingestion rate and body weight is the controlling parameters for evaluating HRA rather than Al concentration alone. We conclude that while the HRA of Al in Shiraz drinking water did not indicate significant health risk, regular monitoring and optimal operation of the coagulation and flocculation processes are essential.

Evaluation of water quality of Chahnimeh as natural reservoirs from Sistan region in southwestern Iran: a Monte Carlo simulation and Sobol sensitivity assessment.

Maintaining the water quality is essential because of the limitation of drinking water bodies and their significant effects on life. Recently, much scientific interest has been attracted to the ecological condition assessment of water resources. Because of numerous health issues connected to water quality, the present work aimed to define the water quality status of Chahnimeh reservoirs, Sistan and Baluchistan province, Iran via the Iran Water Quality Index (IRWQISC), the National Sanitation Foundation Water Quality Index (NSFWQI), and human risk assessment. This cross-sectional descriptive work was accomplished in 4 seasons in 2020. The samples were gathered from 5 various points of Chahnimeh reservoirs. This study led to the results that the NSFWQI index was between 29.4 to 49.32, which showed "bad" quality, and the IRWQI index was between 19.27 and 39.23, which indicated "bad" and "relatively bad" quality. The best water quality based on both indexes was observed in the spring, and the worst was in the fall and summer. The highest value of HQ related to nitrate in drinking water was 1.60 in the group of children. However, according to the Monte Carlo simulation, HQ95% was estimated as 1.29. The Sobol sensitivity analysis of the first-order effect showed that daily water's daily ingestion rate (IR) was the most sensitive input. In addition, the value of the second-order effect indicated that the interaction effect of concentration-ingestion rate was the most sensitive input parameter for HQ. Therefore, regular monitoring is necessary to ensure water safety for human consumption.

Green synthesis, characterization, and application of Fe3O4 nanoparticles for methylene blue removal: RSM optimization, kinetic, isothermal studies, and molecular simulation.

Methylene Blue (MB) is a cationic dye causing various health problems such as asthma, heartbeat, eye and skin irritation, nausea, and distress during prolonged exposure. In this regard, the green magnetite nanoparticle was synthesized using the extract of Prosopis farcta. The synthesized Fe3O4nanoparticle was characterized by X-ray powder diffraction (XRD), Field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), Fourier transforms Infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM), and Brunauer-Emmett-Teller (BET). The corresponding parameters, including the primary concentration of MB (5-65 mg/L), the dose of synthesized nanoparticle (0.025-0.925 g/L), solution pH (3-11), and contact time (20-60 min), were considered. Also, central composite design (CCD), as one of the response surface methodologies (RSM), was used for the related modelling and optimization. The particle size of the adsorbent was between 5 and 70 nm, and the nanoparticle has 206.75 m2/g of a specific surface, 6.1 nm of average pore size, and 0.3188 cm3/g of the total pore volume. The optimal conditions for MB removal by the nanoparticle were found to follow an initial MB concentration of 20 mg/L, 0.7 g/L of the nanoparticle dose, pH = 9, and a contact time of 50 min. The pseudo-second-order (PSO) and Freundlich models were the best kinetic and isothermal models for MB removal by the synthesized nanoparticle. Molecular modelling was used to optimize the MB molecular configuration and compute HOMO-LUMO energies, quantum-chemical descriptors, and molecular electrostatic potential to evaluate the nature reactivity of the MB molecule.

The concentration of potentially toxic elements (PTEs) in drinking water from Shiraz, Iran: a health risk assessment of samples.

The existence of potentially toxic elements (PTEs) in water bodies has posed a menace to human health. Thus, water resources should be protected from PTEs, and their effect on the exposed population should be investigated. In the present investigation, the concentrations of PTEs such as lead (Pb), mercury (Hg), manganese (Mn), and iron(Fe) in the drinking water of Shiraz, Iran, were determined for the first time. In addition, hazard quotient, hazard index, cancer risk, and sensitivity analysis were applied to estimate the noncarcinogenic and carcinogenic impacts of Pb, Hg, Mn, and Fe on exposed children and adults through ingestion. The mean concentrations (µg/L) of Pb, Hg, Mn, and Fe were 0.36, 0.32, 2.28, and 8.72, respectively, in winter and 0.50, 0.20, 0.55, and 10.36, respectively, in summer. The results displayed that Fe concentration was more than the other PTEs. PTE concentrations were lower than the standard values of the Environment Protection Agency and World Health Organization. Values of the degree of contamination and heavy metal pollution index for lead, mercury, manganese, and iron were significantly low (< 1) and excellent (< 50), respectively. Based on the Spearman rank correlation analysis, positive and negative relationships were observed in the present study. The observations of the health risk assessment demonstrated that mercury, lead, iron, and manganese had an acceptable level of noncarcinogenic harmful health risk in exposed children and adults (hazard quotients < 1 and hazard index < 1). The carcinogenic risk of lead was low (< E - 06), which can be neglected. Monte Carlo simulation showed that water intake rate and mercury concentration were the most critical parameters in the hazard index for children and adults. Lead concentration was also the most crucial factor in the cancer risk analysis. The results of the present study proved that the drinking water of Shiraz is safe and healthy and can be confidently consumed by people.

Removal of Amoxicillin from Aqueous Media by Fenton-like Sonolysis/H2O2 Process Using Zero-Valent Iron Nanoparticles.

High concentrations of antibiotics have been identified in aqueous media, which has diminished the quality of water resources. These compounds are usually highly toxic and have low biodegradability, and there have been reports about their mutagenic or carcinogenic effects. The aim of this study was to apply zero-valent iron-oxide nanoparticles in the presence of hydrogen peroxide and the sonolysis process for the removal of the amoxicillin antibiotic from aqueous media. In this study, zero-valent iron nanoparticles were prepared by an iron chloride reduction method in the presence of sodium borohydride (NaBH4), and the obtained nanoparticles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and vibrating-sample magnetometry (VSM). Then, using a Fenton-like process, synthetic wastewater containing 100 to 500 mg/L amoxicillin antibiotic was investigated, and the effects of different parameters, such as the frequency (1 and 2 kHz), contact time (15 to 120 min), the concentration of hydrogen peroxide (0.3%, 0.5%, and 6%), the dose of zero-valent iron nanoparticles (0.05, 0.1, 0.5 g/L), and pH (3, 5, 10) were thoroughly studied. A pH of 3, hydrogen peroxide concentration of 3%, ultrasonic-wave frequency of 130 kHz, zero-valent iron nanoparticles of 0.5 g/L, and contaminant concentration of 100 mg/L were obtained as the optimal conditions of the combined US/H2O2/nZVI process. Under the optimal conditions of the combined process of zero-valent iron nanoparticles and hydrogen peroxide in the presence of ultrasonic waves, a 99.7% removal efficiency of amoxicillin was achieved in 120 min. The results show that the combined US/H2O2/nZVI process could be successfully used to remove environmental contaminants, including antibiotics such as amoxicillin, with a high removal percentage.

An ontology-based study on water quality: probabilistic risk assessment of exposure to fluoride and nitrate in Shiraz drinking water, Iran using fuzzy multi-criteria group decision-making models.

World Health Organization reports that 2.2 million people die yearly from insufficient sanitary drinking water. This ontology-based study focused on investigating the chemical quality of drinking water through a new water quality index designed by fuzzy multi-criteria group decision-making methods, merged with GIS, and, secondly, surveying non-carcinogenic risk assessment of fluoride and nitrate using Monte Carlo simulation and sensitivity analysis in Shiraz's water sources. F-, NO3-, NO2-, EC, TDS, alkalinity, TH, SO42-, Cl-, and Na were applied in the WQI. The NO3- mean concentrations were 23.15 and 27.66 mg/L in the cold and warm seasons, while the mean concentrations of fluoride were 0.50 and 0.46 mg/L during the cold and warm period. The 95th centiles of fluoride's HQs among infants, children, teenagers, and adults were 0.56, 0.7, 0.49, and 0.4, respectively, in the cold season, which was 0.65 and 0.81, respectively, 0.57 and 0.46 for mentioned groups in the warm season. In comparison, the 95th centiles of nitrate's HQs among infants, children, teenagers, and adults were 1.27, 1.59, 1.13, and 0.9, respectively. The HQs were more than 1 for infants, children, and teenagers, so nitrate can have various adverse effects, whereas fluoride does not adversely affect all aging groups in both seasons. Also, nitrate concentration can increase the non-carcinogenic risk, which the IR and ED lead to the HQ increasing. In contrast, BW has a negative effect on risk increasing. Overall, source management of these parameters can significantly reduce the concentration of nitrate and their adverse human health effect.

Comprehensive assessment of water quality and associated health risks in an arid region in south Iran.

This study aims at investigating the quality of drinking water and evaluating the non-carcinogenic risk of fluoride and nitrate ions in drinking water, and fluoride in tea in Zarrin Dasht, Iran. We focus on tea since it is the most popular drink among Iranian people and in the study region. We collected and analyzed 23 drinking water samples and 23 tea samples from different locations in the study region. Based on the water quality index, the consumed drinking water does not have a good quality in most Zarrin Dasht areas. Accordingly, the water quality index (WQI) is poor and very poor in 70% and 13% of the water samples, respectively. The average fluoride concentration of the tea samples is 2.71 mg/L. The mean values of Fluoride Hazard Index (HIfluoride) are 3.77, 2.77, and 2.33 for children, teenagers, and adults, respectively, which are higher than the safe limit of 1. The Nitrate Hazard Index (HInitrate) is higher than the safe limit of 1 in 8.7% of the samples. The results of the Monte Carlo simulation demonstrate that HIfluoride and HInitrate are higher than 1 in all the groups, except for adults. According to the results of the sensitivity analysis, ingestion rate and body weight have a large effect on HIfluoride and HInitrate, but body weight is inversely associated with sensitivity. According to the Piper diagram, saline water is the predominant type in Zarrin Dasht. Besides, the results of the principal component analysis (PCA) show a high correlation between fluoride and pH, which could be related to the effect of pH on fluoride dissolution and ion exchange. Therefore, appropriate measures are recommended to be taken in order to reduce the amount of fluoride in the drinking water resources of this region. Reduction of tea consumption can also be considered an important factor in decreasing the amount of fluoride intake.

Simultaneous removal of fluoride and nitrate from synthetic aqueous solution and groundwater by the electrochemical process using non-coated and coated anode electrodes: A human health risk study.

Co-presence of fluoride (F-) and nitrate (NO3-) in water causes numerous health complications. Thus, they should be eliminated by an appropriate method like the EC process. In this research, simultaneous removal of F- and NO3- from synthetic aqueous solution and groundwater has been considered by the EC technique under operational parameters like anode materials (un-coated (Al and Fe) and synthesized coated (Ti/TiRuSnO2 and Ti/PbO2)), cathode materials (Cu, St, and Gr), current density (12, 24, and 36 mA/cm2), inter-electrode distance (0.5, 1, and 2 cm), pH (5.5, 7, and 8.5), NaCl concentrations (0.5, 1, and 1.5 g/L), electrolysis time (15, 30, 45, 60, 90, and 120 min), NO3- concentrations (75, 150, and 225 mg/L), and F- concentrations (2, 4, 6, and 8 mg/L) for the first time in this research. The results proved that Al as non-coated anode and Cu as cathode electrodes were more effective in the co-removal of F- and NO3-. The maximum removal efficiencies of 94.19 and 95% were observed at the current density of 36 mA/cm2, 1 cm of inter-electrode distance, pH 7, 1 g/L of NaCl, and 90 min electrolysis time by Al-Cu electrode for F- (2 mg/L) and NO3- (75 mg/L), respectively. The higher efficiency of Al-Cu electrodes was due to the simultaneous occurrence of electrocoagulation, electroreduction, and electrooxidation processes. Al-Cu electrode application considerably diminished f- and NO3- concentrations in the groundwater. Health risk assessment proved that HQ of F- was significantly decreased after treatment by the Al-Cu electrode. Thus, the EC process using an appropriate and effective electrode is a promising technique for treating aqueous solutions containing F- and NO3-.

A Pilot Study on the Association of Lead, 8-Hydroxyguanine, and Malondialdehyde Levels in Opium Addicts' Blood Serum with Illicit Drug Use and Non-Addict Persons.

While a large body of literature has shown the health problems of illicit drug use, research is needed on how substance abuse impacts DNA damage and contaminants in blood, especially given Pb-contaminated opium. This pilot study aimed to evaluate the levels of lead (Pb), 8-hydroxy di-guanine (8-oxo-Gua), and malondialdehyde (MDA) in the blood serum of opium addicts and non-addict people. The current study is a case-control study with a cross-sectional design. A sample of 50 opium-addicted and non-addict adults were chosen for this study using convenience and random sampling methods. Participants were divided into two groups: addicts and non-addicts. The atomic absorption spectroscopy method was used to measure the quantity of Pb, and the Enzyme-Linked Immunosorbent Assay (ELISA) method was used to measure the amount of 8-oxo-Gua and MDA. The data were analyzed using an independent t-test. The results show that the amount of Pb in the blood serum of addicted women and men was higher than levels in non-addict men and women, for the study participants (p-value = 0.001). Blood levels were not significantly different between addicts and non-addicts for men or women for 8-oxo-Gua (p-value = 0.647 for women and p-value = 0.785 for men) and MDA (p-value = 0.867 for women and p-value = 0.995 for men). In general, addicts' blood Pb levels were found to be substantially higher than those of normal non-addict persons in this pilot study. As a result, testing for blood Pb levels in addicts may be informative in instances when symptoms are inconclusive.