ABSTRACT
Cardiovascular diseases are the most prevalent medical conditions affecting the modern world, reducing the quality of life for those affected and causing an ever increasing burden on clinical resources. Cardiac biomarkers are crucial in the diagnosis and management of patient outcomes. In that respect, such proteins are desirable to be measured at the point of care, overcoming the shortcomings of current instrumentation. We present a CO2 laser engraving technique for the rapid prototyping of a polymeric autonomous capillary system with embedded on-chip planar lenses and biosensing elements, the first step towards a fully miniaturised and integrated cardiac biosensing platform. The system has been applied to the detection of cardiac Troponin I, the gold standard biomarker for the diagnosis of acute myocardial infarction. The devised lab-on-a-chip device was demonstrated to have 24 pg/ml limit of detection, which is well within the minimum threshold for clinically applicable concentrations. Assays were completed within approximately 7-9 min. Initial results suggest that, given the portability, low power consumption and high sensitivity of the device, this technology could be developed further into point of care instrumentation useful in the diagnosis of various forms of cardiovascular diseases.
Subject(s)
Biosensing Techniques/instrumentation , Lab-On-A-Chip Devices , Microfluidic Analytical Techniques/instrumentation , Troponin I/analysis , Antibodies, Immobilized/chemistry , Equipment Design , Humans , Immunoassay/instrumentation , Limit of DetectionABSTRACT
We report an experimental and numerical characterization of three-dimensional acoustic streaming behavior in small droplets of volumes (1-30 µl) induced by surface acoustic wave (SAW). We provide a quantitative evidence of the existence of strong nonlinear nature of the flow inertia in this SAW-driven flow over a range of the newly defined acoustic parameter F{NA}=Fλ/(σ/R_{d})≥0.01, which is a measure of the strength of the acoustic force to surface tension, where F is the acoustic body force, λ is the SAW wavelength, σ is the surface tension, and R{d} is the droplet radius. In contrast to the widely used Stokes model of acoustic streaming, which generally ignores such a nonlinearity, we identify that the full Navier-Stokes equation must be applied to avoid errors up to 93% between the computed streaming velocities and those from experiments as in the nonlinear case. We suggest that the Stokes model is valid only for very small acoustic power of ≤1 µW (F{NA}<0.002). Furthermore, we demonstrate that the increase of F{NA} above 0.45 induces not only internal streaming, but also the deformation of droplets.