Hair and urinary 2-hydroxynaphthalene levels in the people living in a region with frequent oil pipeline incidents in Iran: Health risk assessment.

Oil spills from pipeline accidents can have long-lasting health effects on residents of polluted regions. Assessing the potential health risk of these accidents is crucial for effective environmental health management. This study analyzed the concentration of 2-OHNAP in urine and hair as biomarkers of PAHs exposure among the people living in a region with frequent oil pipeline incident in Iran. Fifty pairs of hair and urine samples were collected from residents along with demographic information and dietary habits via a questionnaire. The concentration of 2-OHNAP was analyzed using high performance liquid chromatography coupled with fluorescence detector (HPLC-FLD). 2-OHNAP was detected in 100% of urine and 88% of hair samples. The mean concentration of 2-OHNAP in urine was 16.65 ± 21.98 µg/g creatinine and in hair was 8.16±7.62 ng/g dry weight (dw). However, there was no significant correlations between the levels of 2-OHNAP in urine and hair. The mean values of HQ and CR were below 1 and 10-6, respectively. Moreover, some simulated health risk indices were near the threshold levels, and the carcinogenic risk above 70% of the simulated CRs was above 10-6 as well. Therefore, the health risk attributed to the exposure to the parent compound of 2-OHNAP in the study area is currently acceptable, but it is not negligible and may be worsened in the future. This study provides a valuable scientific information for regional decision makers and stakeholders about human health programs and identification of environmental health priorities.

Co-occurrence of polycyclic aromatic hydrocarbons and heavy metals in various environmental matrices of a chronic petroleum polluted region in Iran; Pollution characterization, and assessment of ecological and human health risks.

Oil spills from pipeline accidents can result in long-lasting health effect in the people living in a polluted region . In this study, the level of the 16 US EPA priority polycyclic aromatic hydrocarbons (PAHs ) and heavy metals (HMs) have been analyzed in environmental matrices of a region with frequent oil pipeline accidents in Iran . The results showed that the mean concentration of ΣPAHs and ΣHMs decreased from the upstream to the downstream and also the levels were higher in the wet season than those in the dry season. The average concentration of HMs in sediments was higher than that in other environments. The 3-ring and 4-ring PAHs were dominant in all of the studied matrices with the average values of 32.61 % and 45.85 %, respectively. The ecological risks of PAHs and HMs were medium and high in all matrices, respectively. In wet season, the total cancer risk (TCR) related to PAHs in agricultural soil was greater than 10-4, whereas it's very close to the threshold for HMs in water. This study offers a reference for assessing the long-term impact of oil spills in contaminated environmental matrices. The results are crucial for developing effective strategies to mitigate oil pollution impacts and protect environmental and public health.

Melamine sponges incorporated azo-linked porous organic polymer as adsorbent for extraction and determination of six B vitamins using pipette tip micro solid-phase extraction.

A novel azo-linked porous organic polymer (AL-POP) was synthesized from caffeic acid and benzidine via an azo-coupling reaction and characterized by FTIR, SEM-EDS, BET, TGA, XRD and zeta potential analysis. AL-POPs were incorporated into melamine sponges and used for pipette tip micro solid-phase extraction (PT-MSPE) of six types of B vitamins (including thiamine, riboflavin, nicotinamide, pyridoxine, folic acid, and cyanocobalamin). After extraction, the samples were analyzed using high performance liquid chromatography-diode array detection (HPLC-DAD) system. The effect of AL-POP composition on the extraction efficiency (EE) of vitamins was investigated and benzidine to caffeic acid mol ratio of 1.5, 3.35 mmol of NaNO2, and reaction time of 8 h were selected as optimum conditions. The efficiency of the extraction process was improved by optimizing various parameters such as the amount of sorbent, pH and ionic strength of the sample, sample volume, number of sorption and desorption cycles, type of wash solvent, and type and volume of eluent solvent. Linearity (R2≥0.9987), Limit of detection (LOD) (11.88-18.97 ng/mL), limit of quantification (LOQ) (39.62-63.23 ng/mL), and enrichment factor (EF) (1.27-4.31) were obtained using calibration curves plotted under optimum conditions. Recovery values of these six B vitamins in the spiked multivitamin syrup samples varied from 80.01% to 108.35%, with a relative standard deviation (RSD) below 5.44%. Eventually, the optimized method was successfully used to extract and quantify the B vitamins in multivitamin syrup and non-alcoholic beer.

Indole-Containing Metal Complexes and Their Medicinal Applications.

Indole is an important element of many natural and synthetic molecules with significant biological activity. Nonetheless, the co-presence of transitional metals in organic scaffold may represent an important factor in the development of effective medicinal agents. This review covers some of the latest and most relevant achievements in the biological and pharmacological activity of important indole-containing metal complexes in the area of drug discovery.

Biomass valorization: Sulfated lignin-catalyzed production of 5-hydroxymethylfurfural from fructose.

This study is aimed at the investigation of the preparation of sulfated lignin (SL) as a Bronsted acid catalyst for the preparation of 5-hydroxymethylfurfural (5-HMF). SL was characterized by different methods including FT-IR, FESEM, XRD, and EDS analyses. It shows promising results after 60 min of reaction at 140 °C, reaching 100% conversion of fructose precursor and 99% yield of 5-HMF, with a fructose: catalyst mass ratio of 10:6.

DNA and HSA interaction of Vanadium (IV), Copper (II), and Zinc (II) complexes derived from an asymmetric bidentate Schiff-base ligand: multi spectroscopic, viscosity measurements, molecular docking, and ONIOM studies.

The interaction of three complexes [Zn(II), Cu(II), and V(IV)] derived from an asymmetric bidentate Schiff-base ligand with DNA and HSA was studied using fluorescence quenching, UV-Vis spectroscopy, viscosity measurements, and computational methods [molecular docking and our Own N-layered Integrated molecular Orbital and molecular Mechanics (ONIOM)]. The obtained results revealed that the DNA and HSA affinities for binding of the synthesized compounds follow as V(IV) > Zn(II) > Cu(II) and Zn(II) > V(IV) > Cu(II), respectively. The distance between these compounds and HSA was obtained based on the Förster's theory of non-radiative energy transfer. Furthermore, computational molecular docking was carried out to investigate the DNA- and HSA-binding pose of the compounds. Molecular docking calculations showed that H-bond, hydrophobic, and π-cation interactions have dominant role in stability of the compound-HSA complexes. ONIOM method was utilized to investigate the HSA binding of the compounds more precisely in which molecular-mechanics method (UFF) and semi-empirical method (PM6) were selected for the low layer and the high layer, respectively. The results show that the structural parameters of the compounds changed along with binding, indicating the strong interaction between the compounds with HSA and DNA. Viscosity measurements as well as computational docking data suggest that all metal complexes interact with DNA, presumably by groove-binding mechanism.

Metabolic engineering of Saccharomyces cerevisiae for linalool production.

OBJECTIVES: To engineer the yeast Saccharomyces cerevisiae for the heterologous production of linalool. RESULTS: Expression of linalool synthase gene from Lavandula angustifolia enabled heterologous production of linalool in S. cerevisiae. Downregulation of ERG9 gene, that encodes squalene synthase, by replacing its native promoter with the repressible MET3 promoter in the presence of methionine resulted in accumulation of 78 µg linalool l(-1) in the culture medium. This was more than twice that produced by the control strain. The highest linalool titer was obtained by combined repression of ERG9 and overexpression of tHMG1. The yeast strain harboring both modifications produced 95 µg linalool l(-1). CONCLUSIONS: Although overexpression of tHMG1 and downregulation of ERG9 enhanced linalool titers threefold in the engineered yeast strain, alleviating linalool toxicity is necessary for further improvement of linalool biosynthesis in yeast.

Application of methyl silane coated iron oxide magnetic nanoparticles for solid-phase extraction and determination of fat-soluble vitamins by high performance liquid chromatography.

Methyl silane coated Fe3O4 magnetic nanoparticles were used for simultaneous extraction of the fat-soluble vitamins (FSVs). The amounts of extracted vitamins were determined by HPLC. The synthesized Fe3O4 nanoparticles were coated with silica and then modified with trimethoxymethylsilane (TMMS). The prepared particles were characterized by different methods. The best amounts of silica and TMMS in sorbent synthesis were 1.2 and 0.5 mL, respectively. The optimum pH values for the sample solution and washing buffer were 5 and 3, respectively. Application of 100 mg sorbent, 700 µL tetrahydrofuran, 5-fold dilution of the sample solution, and 1 min for sorption and desorption times were among the best conditions. At the optimum conditions, the calibration plots for each vitamin were obtained with good linearity (R(2) >0.9992) and suitable linear ranges. This method has a low LOD (<76.1 µg/mL), acceptable repeatability (RSD <5.63%) and reproducibility (RSD <4.71%), and good accuracy (recovery >90.3%). Preconcentration of low concentrations of vitamin D3 was performed, and results showed 3.7 times greater sensitivity after preconcentration. Finally, the amounts of the FSVs in pharmaceutical formulations were determined using the proposed method, and results showed good agreement with those reported by manufacturers.

Toluene removal from sandy soils via in situ technologies with an emphasis on factors influencing soil vapor extraction.

The integration of bioventing (BV) and soil vapor extraction (SVE) appears to be an effective combination method for soil decontamination. This paper serves two main purposes: it evaluates the effects of soil water content (SWC) and air flow rate on SVE and it investigates the transition regime between BV and SVE for toluene removal from sandy soils. 96 hours after air injection, more than 97% removal efficiency was achieved in all five experiments (carried out for SVE) including 5, 10, and 15% for SWC and 250 and 500 mL/min for air flow rate on SVE. The highest removal efficiency (>99.5%) of toluene was obtained by the combination of BV and SVE (AIBV: Air Injection Bioventing) after 96 h of air injection at a constant flow rate of 250 mL/min. It was found that AIBV has the highest efficiency for toluene removal from sandy soils and can remediate the vadose zone effectively to meet the soil guideline values for protection of groundwater.

Application of Glycyrrhiza glabra root as a novel adsorbent in the removal of toluene vapors: equilibrium, kinetic, and thermodynamic study.

The aim of this paper is to investigate the removal of toluene from gaseous solution through Glycyrrhiza glabra root (GGR) as a waste material. The batch adsorption experiments were conducted at various conditions including contact time, adsorbate concentration, humidity, and temperature. The adsorption capacity was increased by raising the sorbent humidity up to 50 percent. The adsorption of toluene was also increased over contact time by 12 h when the sorbent was saturated. The pseudo-second-order kinetic model and Freundlich model fitted the adsorption data better than other kinetic and isotherm models, respectively. The Dubinin-Radushkevich (D-R) isotherm also showed that the sorption by GGR was physical in nature. The results of the thermodynamic analysis illustrated that the adsorption process is exothermic. GGR as a novel adsorbent has not previously been used for the adsorption of pollutants.

Conversion of isoeugenol to vanillin by Psychrobacter sp. strain CSW4.

To screen strains of halotolerant or halophile bacteria which are able to convert isoeugenol to vanillin, 36 different strains of bacteria isolated from the salty environments in Iran were investigated. During growth on isoeugenol, a moderately halotolerant Gram-negative coccobacil showed capability of converting isoeugenol to vanillin. Based on morphological, physiological, and phylogenetic studies, strain CSW4 was classified as a bacterium belonging to the genus Psychrobacter. The bioconversion products were confirmed by thin-layer chromatography, high-performance liquid chromatography, and spectral data obtained from UV/Vis spectroscopy, FTIR, and mass-spectroscopy. Using growing cells, vanillin reached its maximum level of 88.18 mg L(-1) after 24 h of reaction time in the presence of 1 g L(-1) isoeugenol, resulting in a molar yield of 10.2%. The use of resting cells led to the optimal yield of vanillin (16.4%) which was obtained after 18-h reaction using 1 g L(-1) isoeugenol and 3.1 g of dry weight of cells per liter harvested at the end of the exponential growth phase. To improve vanillin yield, the effect of substrate concentration on vanillin production under resting cells conditions was also investigated. Using 10 g L(-1) isoeugenol, the maximal vanillin concentration (1.28 g L(-1)) was achieved after a 48-h reaction, without further optimization. The present study brings the first evidence for biotransformation of isoeugenol to vanillin in the genus Psychrobacter.

Pseudomonas resinovorans SPR1, a newly isolated strain with potential of transforming eugenol to vanillin and vanillic acid.

In this study a novel strain was isolated with the capability to grow on eugenol as a source of carbon and energy. This strain was identified as Pseudomonas resinovorans (GenBank accession no. HQ198585) based on phenotypic characterization and phylogenetic analysis of 16S rDNA gene. The intermediates coniferyl alcohol, coniferyl aldehyde, ferulic acid, vanillin and vanillic acid were detected in the culture supernatant during eugenol biotransformation with this strain. The products were confirmed by thin layer chromatography (TLC), high performance liquid chromatography (HPLC) and spectral data achieved from UV-vis, FTIR and mass spectroscopy. Using eugenol as substrate and resting cells of P. resinovorans SPR1, which were harvested at the end of the exponential growth phase, without further optimization 0.24 g/L vanillin (molar yield of 10%) and 1.1g/L vanillic acid (molar yield of 44%) were produced after 30 h and 60 h biotransformation, respectively. The current work gives the first evidence for the eugenol biotransformation by P. resinovorans.

Candida galli strain PGO6: a novel isolated yeast strain capable of transformation of isoeugenol into vanillin and vanillic acid.

Candida galli strain PGO6 isolated from oil-contaminated water is the first isolated yeast strain which is capable to form vanillin and vanillic acid during isoeugenol biotransformation. The products were confirmed by thin-layer chromatography (TLC), changes in the UV absorption pattern and high-performance liquid chromatography (HPLC). The phenotypic and physiochemical characteristics as well as molecular phylogenetic analysis based on amplification the ITS1-5.8S-ITS2 rDNA regions indicated the isolated strain PGO6 was identified as C. galli (GenBank accession number HM641231). Resting cells of C. galli PGO6 from the late-exponential of growth phase were used as biocatalysts for the biotransformation of isoeugenol. The optimal molar conversion of vanillin (48%) and vanillic acid (19%) was obtained after a 30 h incubation using 0.1% (v/v) of isoeugenol and 6 mg of dry weight of cells per ml without further optimization. Under these conditions, the total amount of vanillin and vanillic acid was 583 mg l(-1). Further biotransformation was carried out using 0.5% (v/v) of isoeugenol under the resting cells conditions, yielding a vanillin concentration of 1.12 g l(-1) (molar yield 25.7%) after 60 h incubation. This study brings the first evidence for biotransformation of isoeugenol to vanillin and vanillic acid by a yeast strain.

Use of Growing Cells of Pseudomonas aeruginosa for Synthesis of the Natural Vanillin via Conversion of Isoeugenol.

The great demand of people for consumption of natural additives resulted in producing natural vanillin. There are plant sources and chemical procedures for vanillin production but microbial bioconversions are being sought as a suitable alternative. In the present work, the ability to produce vanillin from isoeugenol was screened using growing cultures of various bacteria. Among the 56 strains of bacteria isolated from the soil environments of Iran, a Gram-negative rod designated as strain ISPC2 showed the capability of promoting the formation of high amounts of vanillin when grown in the presence of isoeugenol. On the basis of morphological and physiochemical characteristics and 16S ribosomal ribonucleic acid (rRNA) gene sequence analysis, the isolate was identified as Pseudomonas aeruginosa ISPC2. Vanillin formation was analyzed by GC/FID. In the presence of isoeugenol, a growing culture of P. aeruginosa ISPC2 produced 1.62 g/L vanillin (molar yield of 17.3%) after a 72 h reaction at 30°C and 200 rpm. This proposed procedure is an alternative approach to obtain vanillin in an environmentally friendly way. Further studies for standardization and optimization for higher yield of vanillin production, needs to be investigated.

Simultaneous microemulsion liquid chromatographic analysis of fat-soluble vitamins in pharmaceutical formulations: optimization using genetic algorithm.

An environmentally benign and simple method has been proposed for separation and determination of fat-soluble vitamins using isocratic microemulsion liquid chromatography. Optimization of parameters affecting the separation selectivity and efficiency including surfactant concentration, percent of cosurfactant (1-butanol), and percent of organic oily solvent (diethyl ether), temperature and pH were performed simultaneously using genetic algorithm method. A new software package, MLR-GA, was developed for this purpose. The results indicated that 73.6mM sodium dodecyl sulfate, 13.64% (v/v) 1-butanol, 0.48% (v/v) diethyl ether, column temperature of 32.5 degrees C and 0.02M phosphate buffer of pH 6.99 are the best conditions for separation of fat-soluble vitamins. At the optimized conditions, the calibration plots for the vitamins were obtained and detection limits (1.06-3.69microgmL(-1)), accuracy (recoveries>94.3), precision (RSD<3.96) and linearity (0.01-10mgmL(-1)) were estimated. Finally, the amount of vitamins in multivitamin syrup and a sample of fish oil capsule were determined. The results showed a good agreement with those reported by manufactures.

Effect of plant oils upon lipase and citric acid production in Yarrowia lipolytica yeast.

The nonconventional yeast Yarrowia lipolytica degrades very efficiently hydrophobic substrates to produce organic acids, single-cell oil, lipases, and so forth. The aim of this study was to investigate the biochemical behavior and simultaneous production of valuable metabolites such as lipase, citric acid (CA), and single-cell protein (SCP) by Yarrowia lipolytica DSM 3286 grown on various plant oils as sole carbon source. Among tested plant oils, olive oil proved to be the best medium for lipase and CA production. The Y. lipolytica DSM 3286 produced 34.6 +/- 0.1 U/mL of lipase and also CA and SCP as by-product on olive oil medium supplemented with yeast extract. Urea, as organic nitrogen, was the best nitrogen source for CA production. The results of this study suggest that the two biotechnologically valuable products, lipase and CA, could be produced simultaneously by this strain using renewable low-cost substrates such as plant oils in one procedure.

Sensitive determination of carbohydrates labelled with p-nitroaniline by capillary electrophoresis with photometric detection using a 406 nm light-emitting diode.

p-Nitroaniline was explored as a derivatising reagent for UV absorbance detection of carbohydrates after separation by CE. This derivatising agent has three advantages: first, it has excellent water solubility; second, it has high molar absorptivity; and third, it is possible to obtain sensitive detection using a UV or blue light-emitting diode (LED) as the light source. The labelling reaction took less than 30 min to complete with high reaction yield. The separation process was modelled and optimised using an artificial neural network. Nine carbohydrates were separated by a CE system within 16 min using a 0.17 M boric acid buffer at pH 9.7. On-column LED detection at 406 nm allowed the detection of carbohydrates with good detection limits (<1.1 microM or 8.8 fmol) and reproducible quantification in the concentration range of 2.6-200 microM. This method was applied successfully to the determination of component carbohydrates in some food samples.

Separation and determination of sugars by reversed-phase high-performance liquid chromatography after pre-column microwave-assisted derivatization.

In this study the possibility of derivatizing sugars using microwave irradiation was investigated. The amount of reagent, irradiation intensity, and derivatization time were optimized. In the derivatization of sugars with p-nitroaniline the reaction is complete within 5 min at 600 W when the p-nitroaniline-to-sugar and NaBH3CN-to-sugar mole ratios were above 1.4 and 3.1, respectively. A Doehlert design was used to optimize the mobile phase for separation of p-nitroaniline-labeled sugars; and the best separation was obtained by use of 0.01 mol L-1 acetate buffer at pH 4.40 containing 11.0% acetonitrile. Analysis using this method was highly sensitive and analysis time was short. Finally, a food sample was analyzed using the proposed method.

Simultaneous micellar liquid chromatographic analysis of seven water-soluble vitamins: optimization using super-modified simplex.

A super-modified simplex (SMS) method has been used to optimize the mobile phase used for separation of seven water-soluble vitamins in multivitamin tablets by gradient micellar liquid chromatography (MLC) with ultraviolet (UV) detection at 254, 295, and 361 nm. Effect of column temperature and addition of organic modifier to the mobile phase on separation efficiency were investigated: the appropriate conditions used were a temperature of 35 degrees C and 1-butanol modifier. The sodium dodecyl sulfate (SDS) concentration, pH, and 1-butanol% in the mobile phase were chosen for simultaneous optimization using the SMS method. The optimum mobile phase was found to be 16 mmol L(-1) (mM) SDS, 0.02 M phosphate buffer, pH 3.6, and a gradient of 3.5-10% (v/v) butanol. The total analysis time for vitamins was 75 min. The analytical parameters including linearity ( r>0.9970), limit of detection (0.12-50 micro g mL(-1)), precision of method (relative standard deviation (RSD) <8.90%), and accuracy obtained by the recovery assay (88-103%) support the usefulness of the proposed method for the determination of the water-soluble vitamins.

Separation of B6 vitamers with micellar liquid chromatography using UV and electrochemical detection.

Separation of six vitamers of vitamin B6 was performed by RP-HPLC using micellar mobile phase, UV and electrochemical detection. Effect of temperature, type and amount of organic modifier in mobile phase on efficiency and asymmetry factor showed that, the appropriate conditions were temperature of 35 degrees C and 3.0-5.0% (v/v) 1-butanol in mobile phase. Variations of selectivity factor versus 1-butanol concentration, pH of mobile phase, and SDS concentration was investigated and the following optimized conditions were selected for the separation: 3.0% (v/v) 1-butanol, pH=5.5 and 65 mM SDS in mobile phase. Electrochemical behavior of vitamers in optimized mobile phase was investigated using cyclic voltammetry, and potential of +1.2 V versus Ag/AgCl(Sat.) was chose as working potential. Finally, separation of B6 vitamers using UV detection at 254 nm and electrochemical detection at +1.2 V was compared.