ABSTRACT
The current study focuses on the degradation of Procion brilliant yellow H-E6G, an azo dye, using ultrasonic and hydrodynamic cavitation (HC), evaluating the impact of various parameters on the extent of degradation. The use of only ultrasound showed less oxidation capacity as indicated by only 19.1% degradation at an optimized power of 140 W, pH of 2.5, temperature of 40°C, and initial dye concentration of 15 ppm. The effectiveness of hybrid approaches involving US + H2 O2 , US + Fenton, and US + H2 O2 + potassium persulfate (KPS) was subsequently evaluated under optimized conditions. A notable enhancement in decolorization extent was observed for combined operations, including US + H2 O2 , US + Fenton, and US + H2 O2 + KPS (dual oxidant scheme) with the actual decolorization extents as 80.6%, 85%, and 92.2% respectively. An optimized scheme of US + H2 O2 + KPS was also utilized to decolorize the dye at a pilot scale using a US flow cell and also an HC reactor that yielded 91.8% and 88% reductions in initial concentration. The dye decolorization was elucidated to follow first-order kinetics for all the individual and combination approaches. The obtained values of the rate constants were also utilized for the evaluation of the synergistic index. A toxicity analysis was also performed on the dye, both before and following treatment, utilizing two bacterial strains. A comparative analysis of various treatment approaches has been presented focusing on factors such as cavitational yield, operational expenses, and energy requirements. The study elucidated that the combination of US + H2 O2 + KPS effectively removes Procion brilliant yellow H-E6G giving 92.2% as the maximum degradation at an operating cost of 0.1862 $/L. PRACTITIONER POINTS: First depiction of cavitative degradation of Procion brilliant yellow H-E6G Optimizing the equipment operating parameters and chemical oxidants Demonstration of optimized treatment scheme at pilot scale Evaluation of various approaches based on synergy and costs of treatment US + H2 O2 + KPS is the best approach for dye degradation.
Subject(s)
Azo Compounds , Benzenesulfonates , Hydrogen Peroxide , Oxidants , Hydrodynamics , UltrasonicsABSTRACT
The complexity of wastewater matrix poses a challenge for conventional processes especially due to the presence of refractory compounds such as dyes. The present work focuses on utilizing ultrasound-induced cavitation in conjunction with different oxidants such as hydrogen peroxide, Fenton's reagent and potassium persulfate to treat Procion Brilliant Purple H-3R dye containing wastewater. The impact of various operating parameters as pH, frequency, and power on degradation levels has been studied with the aim of optimizing degradation. The optimal conditions for the degradation of Procion Brilliant Purple H-3R were determined as pH of 12, frequency of 22 kHz, and power of 250 W, resulting in a maximum degradation of 70.25%. Combination of a cavitation reactor with hydrogen peroxide, Fenton reagent, and KPS was then applied at optimized conditions, which confirmed a notable enhancement in degradation compared to the only ultrasound based process. Specifically, the degradation extent was 95.99% for combination with H2O2 at 0.5 g/L loading, 99.79% for combination with Fenton at H2O2/Fe2+ ratio of 50:1, and 99.05% for combination with KPS at loading of 0.75 g/L. The kinetic rate constant for the combined approach of US + Fenton was also maximum at 7.47 × 10-1 L mg-1 min-1. Toxicity analysis was conducted on two bacterial strains, Escherichia coli and Staphylococcus aureus, using the wastewater in native form and after treatment. The various processes were evaluated in terms of the cavitational yield and overall treatment cost and it was determined that US + Fenton process is the most efficient treatment method for fully degrading Procion Brilliant Purple H-3R, particularly at larger scales of operation and cost efficiently as demonstrated in the work.